The " Terminator " a variable voltage ADD ON for your PV is now available at NOTCIGS.COM
Specs : The "Terminator " is an ADD ON for High Voltage Mods ( 6 volts and above ) It is built into a 901 atomizer tube so it is 1.5" long and .36" in diameter .
It is adjustable via a small adjustment screw from 3 volts to 6 volts ( the upper range depends on the batteries used )
It screws onto your existing device then you attach your atomizer or Carto to it , you can adjust the voltage to get your best vaping voltage .
The Terminator is a NOTCIGS ORIGINAL DESIGN, avoid knockoffs from unscrupulous suppliers!
Specs :
3.0 volt batts = 6.8 volts unloaded
3 ohm load = 5.0 volts out max
2.4 volts min.
3.7 volt batts = 8.3 volts unloaded
6.3 volts Max
2.4 volts min.
3 ohm load
Specs : The "Terminator " is an ADD ON for High Voltage Mods ( 6 volts and above ) It is built into a 901 atomizer tube so it is 1.5" long and .36" in diameter .
It is adjustable via a small adjustment screw from 3 volts to 6 volts ( the upper range depends on the batteries used )
It screws onto your existing device then you attach your atomizer or Carto to it , you can adjust the voltage to get your best vaping voltage .
The Terminator is a NOTCIGS ORIGINAL DESIGN, avoid knockoffs from unscrupulous suppliers!
Specs :
3.0 volt batts = 6.8 volts unloaded
3 ohm load = 5.0 volts out max
2.4 volts min.
3.7 volt batts = 8.3 volts unloaded
6.3 volts Max
2.4 volts min.
3 ohm load