The links at the bottom are moving . Painful at times.
It's a two way street -- everyone get involved. Every little bit counts.
Last edited:
The VapeMate Juice Feeder by SuperT!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
The links at the bottom are moving . Painful at times.
It's a two way street -- everyone get involved. Every little bit counts.
Yeah, I tried a 10ml childproof cap on my 10ml and 6ml soft plastic bottles, it fit both just fine.
i think the vape mate is going to rock ... nuff said ...
looks like a great build from a great guy ..
lawnman3.. happy vets day everyone who has served and still fighting for us...
let freedom ring in my opp...
lawnman3...
looks like a great build from a great guy ..
lawnman3.. happy vets day everyone who has served and still fighting for us...
let freedom ring in my opp...
lawnman3...
Thanks Lawnman I was thinking of picking one up and puting it on my GG at 6v what do you think of the combo.
I will order in a week or so.
I will order in a week or so.
Well this certainly seems promising:
Processed through Sort Facility, November 11, 2010, 8:10 pm, ALBUQUERQUE, NM 87101
Very cool, mine shows no scans yet. But then, I've had packages on the doorstep before the scans showed at all.
Let us know how well it works!
Atavanhalen hello,
My apologies for the late reply.
Thank you for the reply.
I asked the question because I love stainless steel.
Stainless steel has the weight of quality.
Good day.
Last edited:
Yes, stainless steel would just be too heavy sitting out on the end of your PV like that. At least thats my opinion. Some probably wouldn't mind.
I suspect a lot of people will be getting their VapeMates in the next few days, so i thought i'd share some tips that will help you get your VapeMate up and running in no time!
First, contrary to popular rumor, the VapeMate won't fetch you a beer, mow your lawn or dazzle you with colorful blinking lights.
What the VapeMate will help to do, though, is make your Vaping experience a little easier, faster and more hassle free! The VapeMate is an all mechanical, manual feeder, built for durability and simplicity of use. The VapeMate's greatest benefits are not found on any feeder or feeder mod out there including:
-The VapeMate allows almost instantaneous changing of liquid flavors
-The VapeMate is universal and will fit most any Ecig or Mod
-The VapeMate can be transferred from one Ecig to the next in only seconds
Here are some tips that will be useful for you when learning to use your VapeMate:
Tips:
-Practice running your VapeMate off the atomizer and with a water filled juice bottle. This will give you a visual on how much you need to squeeze the bottle in order to get the desired amount to your atomizer.
-Remember, you control how much juice is injected and though the VapeMate will not leak itself, if you flood an atomizer, all atomizers will leak out the bottom and flooding an atomizer can contribute to getting juice in your mouth!
-The VapeMate generally takes a very small, gentle squeeze to dispense enough liquid. Over-dispensing liquid will cause the atomizer to flood!
-Don't be afraid to experiement! There is no right or wrong position to put the VapeMate in! Some may prefer in slung under the Ecig, others off to the side or on top!
-Firmly grasp the atomizer when installing or moving the VapeMate on your atomizer (you can clock the VapeMate in any position, 360 degrees around the atomizer) as it can over- tighten the atomizer, making your atomizer difficult to unscrew. Periodically loosen and gently re-tighten your atomizer if you experience this.
Remember, no doubt you'll accidentally flood your atomizer when learning, but stick with it and in no time it'll become "automatic". Does that make this an Auto Feeder then?!!
I've posted the instructions included with your VapeMate below.
Happy Vaping!
First, contrary to popular rumor, the VapeMate won't fetch you a beer, mow your lawn or dazzle you with colorful blinking lights.
What the VapeMate will help to do, though, is make your Vaping experience a little easier, faster and more hassle free! The VapeMate is an all mechanical, manual feeder, built for durability and simplicity of use. The VapeMate's greatest benefits are not found on any feeder or feeder mod out there including:
-The VapeMate allows almost instantaneous changing of liquid flavors
-The VapeMate is universal and will fit most any Ecig or Mod
-The VapeMate can be transferred from one Ecig to the next in only seconds
Here are some tips that will be useful for you when learning to use your VapeMate:
Tips:
-Practice running your VapeMate off the atomizer and with a water filled juice bottle. This will give you a visual on how much you need to squeeze the bottle in order to get the desired amount to your atomizer.
-Remember, you control how much juice is injected and though the VapeMate will not leak itself, if you flood an atomizer, all atomizers will leak out the bottom and flooding an atomizer can contribute to getting juice in your mouth!
-The VapeMate generally takes a very small, gentle squeeze to dispense enough liquid. Over-dispensing liquid will cause the atomizer to flood!
-Don't be afraid to experiement! There is no right or wrong position to put the VapeMate in! Some may prefer in slung under the Ecig, others off to the side or on top!
-Firmly grasp the atomizer when installing or moving the VapeMate on your atomizer (you can clock the VapeMate in any position, 360 degrees around the atomizer) as it can over- tighten the atomizer, making your atomizer difficult to unscrew. Periodically loosen and gently re-tighten your atomizer if you experience this.
Remember, no doubt you'll accidentally flood your atomizer when learning, but stick with it and in no time it'll become "automatic". Does that make this an Auto Feeder then?!!
I've posted the instructions included with your VapeMate below.
Happy Vaping!
Last edited:
VapeMate Instructions.
1. The VapeMate only accepts child-resistant protective cap plastic bottles and is compatible with 901 or 510 style atomizers. Your VapeMate comes with a spare O-ring for the atomizer retention ring and an O-ring for the juice bottle receptacle. Super-T does not recommend installing the juice bottle O-ring to begin with as it is normally not needed for a proper seal.
2. Screw bottle into juice feeder receptacle.
3. With atomizer installed on your electronic cigarette, firmly grasp the atomizer and insert the VapeMate into the top of your atomizer. You may need to moisten the O-ring on the VapeMate prior to installation and it may also help to twist the VapeMate when inserting.
4. Insert drip tip (not included) into the top of the VapeMate. Again, you may need to moisten the drip tip o-ring prior to installing and possibly twist the drip tip while inserting.
5. Gently squeeze the bottle to dispense juice into the top of your atomizer. Repeat when your atomizer starts to run dry. As your bottle empties, you may need to adjust the level of your feeder when squeezing to a more level position. Don’t be afraid to experiment with positioning when squeezing!
6. Do not leave the VapeMate or the drip tip installed in the VapeMate for extended periods of time as the O-rings may swell, making it difficult or impossible to remove. Super-T recommends removing the VapeMate and drip tip from the VapeMate nightly, washing with soap and water and allowing to dry out overnight.
Tips:
-Practice running your VapeMate off the atomizer and with a water filled bottle. This will give you a visual on how much you need to squeeze the bottle in order to get the desired amount (usually around three drops).
-Firmly grasp the atomizer when installing or moving the VapeMate on your atomizer as it can over- tighten the atomizer, making your atomizer difficult to unscrew. Periodically loosen and gently re-tighten your atomizer.
-The VapeMate generally takes a very small, gentle squeeze to dispense enough liquid. Over-dispensing liquid will cause the atomizer to flood and leak out the bottom of the atomizer.
-If you experience leakage where the bottle screws in, install the provided O-ring into the bottom of the juice bottle receptacle. For most applications, this O-ring is not needed.
1. The VapeMate only accepts child-resistant protective cap plastic bottles and is compatible with 901 or 510 style atomizers. Your VapeMate comes with a spare O-ring for the atomizer retention ring and an O-ring for the juice bottle receptacle. Super-T does not recommend installing the juice bottle O-ring to begin with as it is normally not needed for a proper seal.
2. Screw bottle into juice feeder receptacle.
3. With atomizer installed on your electronic cigarette, firmly grasp the atomizer and insert the VapeMate into the top of your atomizer. You may need to moisten the O-ring on the VapeMate prior to installation and it may also help to twist the VapeMate when inserting.
4. Insert drip tip (not included) into the top of the VapeMate. Again, you may need to moisten the drip tip o-ring prior to installing and possibly twist the drip tip while inserting.
5. Gently squeeze the bottle to dispense juice into the top of your atomizer. Repeat when your atomizer starts to run dry. As your bottle empties, you may need to adjust the level of your feeder when squeezing to a more level position. Don’t be afraid to experiment with positioning when squeezing!
6. Do not leave the VapeMate or the drip tip installed in the VapeMate for extended periods of time as the O-rings may swell, making it difficult or impossible to remove. Super-T recommends removing the VapeMate and drip tip from the VapeMate nightly, washing with soap and water and allowing to dry out overnight.
Tips:
-Practice running your VapeMate off the atomizer and with a water filled bottle. This will give you a visual on how much you need to squeeze the bottle in order to get the desired amount (usually around three drops).
-Firmly grasp the atomizer when installing or moving the VapeMate on your atomizer as it can over- tighten the atomizer, making your atomizer difficult to unscrew. Periodically loosen and gently re-tighten your atomizer.
-The VapeMate generally takes a very small, gentle squeeze to dispense enough liquid. Over-dispensing liquid will cause the atomizer to flood and leak out the bottom of the atomizer.
-If you experience leakage where the bottle screws in, install the provided O-ring into the bottom of the juice bottle receptacle. For most applications, this O-ring is not needed.
A list of suppliers who carry juices in child resistant protective caps. If you know of suppliers or are a supplier who carries juices in child protective caps, let me know and i'll add it to the list!
-Altsmoke
-Puresmoker
-Heaven Gifts
-Health Cabin
-Clouds of Vapor
-Cloud9Vaping
-Good Prophets
-MadVapes
-Altsmoke
-Puresmoker
-Heaven Gifts
-Health Cabin
-Clouds of Vapor
-Cloud9Vaping
-Good Prophets
-MadVapes
Last edited:
Processed through Sort Facility, November 11, 2010, 11:05 pm, JACKSONVILLE, FL 32099
Electronic Shipping Info Received, November 09, 2010
Mine is closer to home than I thought.
Electronic Shipping Info Received, November 09, 2010
Mine is closer to home than I thought.
- Status
Similar threads
