The Vapeonly BCC

Status
Not open for further replies.

BadContrakt

Full Member
May 21, 2013
14
0
Minnesota
Been using this one for 2 days now. At first it was a really bad time with lots of dry hits and after pulling some wick out, it went from dry hits to flooding AND dry hits. I was about ready to throw my hands up and give it up until I watched a review on it and noticed that it could be air flow causing the problems.

In fact, it was the air flow. MOSTLY. I have the eVic (which actually has 4 airflow slots on the top of the device, which is nice) and all I had to do was unthread the tank just a hair and it is 100% better. No more dry hits and the air flow is much better as well.

My step-dad has the Vmax and he was having the same problems, I had him unthread it a bit and he went from 4 WATTS (Yes, he was actually vaping at 4 watts because the dry hits were so bad) all the way up to 8 watts and had CLOUDS of vape! It was a drastic difference.

So this thread isn't about the dry hits, more so it's asking who uses this tank, and how their experience has been with it.

MY experience so far has been frustrating at first, but once I learned what was wrong, it's performing very well at 9 watts (using the 1.8 ohm atty) with clouds of vapor. My brother uses his at 11 watts but I prefer longer drags, he prefers shorter harder drags.

I use 70/30 juice in mine and it flows well so far.

Another question would be the flavor of juice I'm using is a Mint/Cinnamon mix (extremely delicious) and I was wondering if this flavor will break down the tube? I'm pretty certain it will, I was just wondering for sure.
 

EvilJunkee

Full Member
Verified Member
Apr 28, 2013
44
31
Cali
I have the mega bcc from Vapeonly, and I have to say that I love it when it works, I do get gurgling/flooding and I notice it happens a lot when I keep it in my pocket. I'm not sure if I'm suppose to keep it upright or upside down. I'm using the 1.8 ohm head on my Egotwist, with some 80/20 pure pear from Highbrow and I haven't removed any wicks at all. Ive tried restricting the airflow nut I get the same problem. Is it that my juice is too thin???
 

Pur3Rush

Senior Member
ECF Veteran
Dec 31, 2010
240
87
Southern California
I like these a lot, but when the one I have fails, that will be the end of my vaping journey with them. I never had airflow problems, what may happen is if you tighten them too much. After you fill with juice and put the piece with the atty on and screw the bcc together, since the plastic piece is all one piece and the threading is thinned out it can crack . That happened to one of mine when I noticed that when I was vaping it, that vapor would come out of the seal part. Good idea, bad execution. Especially since I really like the drip tip that comes with it.

After a while, for my sanity I just stop keeping track of much of my hard earned dollars are spent on the latest and greatest. I'll try the protank and some evods next and hopefully call it a day.
 

StereoDreamer

Ultra Member
ECF Veteran
Oct 13, 2012
1,341
2,629
59
Columbia MD
I got an iSmoka BCC Mega tank this past weekend at a local vape shop, and so far, I LOVE it. Great flavor, good vapor, and it's easy to fill and doesn't leak at all. No dry hits, and it just works.

I'm using it on an eVic, at between 6.5 and 7.5 watts, using the 2.2ohm head.

As with ANY device, the key to getting good airflow is to only screw it down JUST as tight as it needs to be to maintain a good electrical contact. I mean, like just tight enough so it doesn't wiggle around. Screwing down tanks, cartos or attys hard not only restricts airflow, but it can damage or displace the pin on your mod or the device...
 

JonnyB88

Ultra Member
ECF Veteran
Verified Member
May 24, 2013
1,595
2,557
37
Elgin, IL, USA
I was at my local B&M and they were sold out of a few of the things I went in for, so one of the guys gave me a VapeOnly BCC for free as something of a consolation, and because I was in there specifically to buy some clearos. He said. "Try this. I don't like it, but you might."

Well, I'm just glad I didn't pay money for it. Massive flooding, poor taste, and a plasticy undertone to my vapes. The sad thing is, the hits where it was working properly were GREAT!!! Just not worth it (to me) to put up with the bad ones.
I'll stick to my iClears and Evods.
 

Topwater Elvis

Vaping Master
ECF Veteran
Dec 26, 2012
7,116
16,502
Texas
That's the funny thing about delivery devices everyone seems to have different experiences with the same device.

My VapeOnly mini's are by far my favorite ego threaded clearo delivery device, I don't vape any plastic crackers.
I'm still on the same head that came in them after 20 ~ 40 ml's of use, haven't removed or messed with anything on them.
No funny or odd tastes, never a dry hit, haven't leaked a drop or flooded so far, they give me excellent taste & vapor production (I use 50/50) and they have the warmest vape of any BCC Ive tried.
' I better go knock on wood now '
Now the large size Vapeonly's I wasn't as lucky with, they had all the same problems of any other BCC Ive tried.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread