could not sleep thinking about this and my 100mil of cov's butterscotch..stalking as i type,lmao...i'll keep u guys posted.
- Status
Does anyone know if they are going to have a bigger/better variety of silo's when they update site???
Hey there guys and gals.... Since "sense Fields" is playing with a Vmod does that mean another video review is in the making....
BTW any of the Vmod "Gurus" mention to Grimm about the replacement chassis and seal kit to improve his Vmod experience....
BTW any of the Vmod "Gurus" mention to Grimm about the replacement chassis and seal kit to improve his Vmod experience....
In my experience...HR should be REQUIRED to drink before work!
Bwwwaaaahaaahaaaaaaa!!! Yes!
Thought this might be a good time to show the feeding instructions many of us found useful:
http://www.e-cigarette-forum.com/forum/e-cigarette-video-reviews/195396-vmod-7.html#post3753043
Here's the text from the above link:
1) invert device & wait for juice to fill the bottleneck on the fill bottle. You may even wiggle it a bit & look for the air bubbles.
2) turn upright & squeeze the bottle.
(You will hear the pocket of juice release into the chamber.)
3) dry pull a few times to fill the Hybrid or Silo with juice from the chamber.
4) Vape
5) when atty or carto gets dry, do a couple of dry pulls again.
6) when chamber is empty...see #1
Notes: make sure you are using both seals on the atty or carto. One is an o-ring on above the threads, the other is a band that goes around the atty. Having both of these seals in place is imperative to prevent leaking.
http://www.e-cigarette-forum.com/forum/e-cigarette-video-reviews/195396-vmod-7.html#post3753043
Here's the text from the above link:
1) invert device & wait for juice to fill the bottleneck on the fill bottle. You may even wiggle it a bit & look for the air bubbles.
2) turn upright & squeeze the bottle.
(You will hear the pocket of juice release into the chamber.)
3) dry pull a few times to fill the Hybrid or Silo with juice from the chamber.
4) Vape
5) when atty or carto gets dry, do a couple of dry pulls again.
6) when chamber is empty...see #1
Notes: make sure you are using both seals on the atty or carto. One is an o-ring on above the threads, the other is a band that goes around the atty. Having both of these seals in place is imperative to prevent leaking.
Last edited:
vmod arrived scotay helped me put it together...letting the atty soak in my butterscotch till tonight,keep ur fingers crossed for me..let the vaping gods bless me with no leaks!!
Scotay is Vmod-pert!
If he can't do it...no one can!
No divine intervention required!
If he can't do it...no one can!
No divine intervention required!
ok so i got this thing together could not wait any longer,i'll vape till the nastiness goes away,after all i am a man!!,lol..i have some ?..first why does it not fire every time?..it seems i have to press down the button a couple of times b4 it fires..(2nd)how many times do u guys usually tilt and squeeze @ a time?..for example:is tilt,squeeze,cold draw then vape?...or is it?..tilt,squeeze,cold draw,tilt,squeeze,cold draw then vape?......and what batteries are best in ur opinion?..i have some trustfire blu jackets,and some aw imr's,thnx.
If it's not firing right away, make sure the button is completely unlocked (twisted all the way clockwise). On two of mine, I had to jimmy the spring underneath just a bit because it was trying to spin the button and lock itself. Since then, no problems. Only do the squeeze procedure once. That's all it needs till it starts to dry a bit. As for batteries, everyone has their own preference. I like the AW IMRs myself when using 3.7v. I believe there is only one option for 6 volt. I have some juice that I prefer at 6v and some I like at 3.7. I might be the luckiest guy on earth, but after running well over 100 ml of juice through 2 of them (plus another 40 ml on another so far), I have had exactly zero leakage.
EDITED TO ADD:
I consider the cold draw to be completely optional. I've never done it, and since my vmods work flawlessly and without leakage, I've never had to. A buddy also got one several weeks ago, he also omits the cold draw, and he has never had any leakage either. YMMV.
Last edited:
KK... check to see if the wire from the button is in the hole of the chamber... When you installed the catch cup you my have dislodged it without realizing.... The Vmod should fire every time since it has no electronics.... Its a basic circuit that should always fire unless a bad connection...
You only need to do the tilt thing one time... Don't have to do it every time you need juice as well since there will be some in the chamber from the last tilt and squeeze... Just give another squarsh, squish, squeeze, ect....
You only need to do the tilt thing one time... Don't have to do it every time you need juice as well since there will be some in the chamber from the last tilt and squeeze... Just give another squarsh, squish, squeeze, ect....
let's hope i too get that lucky.....it was my doing.....i just realized i did not have to press hard on the button,nice and gentle,something i have to get use to...it's been along time since i have been with a virgin,lmao
sounds like it might be flooded. Take the atty or carto off and blow out any excess juice. Put it back on and see if it fires.
Update on my cracked chassis:
Spoke with Brian just now (great guy btw) and he is sending out a replacement. Excellent customer service, I must say. Looking forward to receiving the new chassis.
Spoke with Brian just now (great guy btw) and he is sending out a replacement. Excellent customer service, I must say. Looking forward to receiving the new chassis.
Press the bottle oh so delicately. Or Squash, Squoosh, Schmash!
VMODs have endless possibilities.
- Status
Similar threads
