ToBeCo Kayfun v4 question

[SLvapor]

I love my tobeco K4 from eciggity, but i have a question for you owners. Mine came with parts 3-8 assembled and unable to be taken apart. I really like this because the JC does not wobble from the nut becoming loose inside (from my experience so far). Is this standard for parts 3-8 to be together or an updated version. All of my other brand clones did not have this feature. I found them for cheaper on vaporider but don't want to buy there if I won't get the same version if it's not standard.... Thanks guys

 

[ThunderDan]

I have 4 tobeco kayfun 4s, and none of them are like that. You have to unscrew #1, take out 10 & 11, then loosen #9. It should all come apart. At least that is how all of mine have been.

 

[SLvapor]

Ok I'll try again in a minute maybe it's just better threads. I tried when I first got it but just seemed like it just continuously spun and I stopped thinking it was a single piece.

 

[alexmot]

You may also try opening / closing the juice control. On my Infinite clone, that raises part 8 allowing for access to the things under it. Or at least makes it easier to remove the entire build deck assembly.

 

[SLvapor]

Ok trying your way. Still can't get it atm

 

[Marc411]

I have 4 tobeco kayfun 4s, and none of them are like that. You have to unscrew #1, take out 10 & 11, then loosen #9. It should all come apart. At least that is how all of mine have been.

Same here ^^^^

I did receive one that #10 was rounded and when I tried to unscrew it the nut spun. I held the nut from spinning with a screw driver and it came apart. I replaced the #10 insulator with the correct one and haven't had a problem since.

 

[SLvapor]

Ok I believe mine is different one second for pictures

 

[SLvapor]

 

[SLvapor]

 

[SLvapor]

Left is an no name clone (horrible jc threads). The right is my tobeco. I can not break the tobeco down any further, the other I can.

 

[SLvapor]

 

[SLvapor]

I have 4 tobeco kayfun 4s, and none of them are like that. You have to unscrew #1, take out 10 & 11, then loosen #9. It should all come apart. At least that is how all of mine have been.

I believe I have a different version. You're describing exactly how my no name clone (maybe infinite.. same og box) works.

 

[ThunderDan]

It looks like you got #11 off correct? Can't you just push #1 out with a skinny screwdriver or something?

 

[SLvapor]

No it says in there. Like its common for me to over tight the 510 and then the JC doesn't turn but the tobeco is just floating so it doesn't over tighten it seems. The second pic I posted the right (tobeco) is just a metal nut the insulator is part of the base.. the other the nut has the insulator around it.

 

[SLvapor]

Ok I lied 510 does come out 3-8 do not.

 

[SLvapor]

Nothing in center. Doesn't disassemble. I figure this is why I've never had the wobble issue from #9 becoming loose.

 

[SLvapor]

Same here ^^^^

I did receive one that #10 was rounded and when I tried to unscrew it the nut spun. I held the nut from spinning with a screw driver and it came apart. I replaced the #10 insulator with the correct one and haven't had a problem since.

I take it all back. Thanks for your reply it's just like all the others. I questioned myself and took it apart again the white insulator was just vacuumed with juice and I needed a tiny screw to pry it.