UFS and HH 357 problem

[Aron Gatt]

Ok guys got back home, diassembled everything, cleaned and lubed. Installed my spare oring for the connector. Ditched HH 357, installed io6 received today, seal perfect on this one and no more leaking from the connector. Life back to normal

Io6 ..it must need a special sleeve or connector I recon right?

 

[tattootom]

in my opinion the hh 357 is NOT the best choice for ufs! this atty is too sensitiv with more than a view drops of liquid, i think the best choice for ufs is the cisco lr spec

 

[Aal_]

Io6 ..it must need a special sleeve or connector I recon right?

Nope. Just used a regular size derlin drip tip in short mode. Small mouth surface but enough.

 

[Aron Gatt]

Nope. Just used a regular size derlin drip tip in short mode. Small mouth surface but enough.

View attachment 156769

Oh ok ...looks a bit odd but what the hell ..if it vapes and good too .... Then it's great

 

[Aal_]

Oh ok ...looks a bit odd but what the hell ..if it vapes and good too .... Then it's great

I have an XL somewhere but too lazy to look for it. This vapes just fine

 

[CaptSteve]

You need one of these but they're out of stock right now.

UFS 510 Extension | GG UFS | GG Accessories |

Maybe Imeo will make more but you can use a longer drip tip I have these and they are quite long. Sadly also out of stock now

510 Stainless Steel Regular Straight Drip Tip

Nope. Just used a regular size derlin drip tip in short mode. Small mouth surface but enough.

View attachment 156769

 

[Aal_]

You need one of these but they're out of stock right now.

UFS 510 Extension | GG UFS | GG Accessories |

Maybe Imeo will make more but you can use a longer drip tip I have these and they are quite long. Sadly also out of stock now

510 Stainless Steel Regular Straight Drip Tip

Captain I have 2 of those. Atomizer is 306 so doesn't work. I am waiting for the cherry vape universal to be in stock in some shop to be able to use extender.

 

[CaptSteve]

oops sorry didn't realize you were running a 306.

 

[SheerLuckHolmes]

I just got a UFS off the classifieds. Finally got to it this evening. I spent the last couple of days watching youtube videos, especially bishopheals (very comprehensive).

I installed a HH .357. Everything looks OK. But I am getting dry hits. juice control opened all the way. Air control open half a turn. I can drip juice down the mouth piece all is good. After 5 or 6 hits they turn dry.

I really want to get this to work well. Any advice anyone can offer would be greatly appreciated.

Thanks.

 

[LongHaul]

The tanbar tip from the people that make the precise+ works very well also

 

[fright88]

I just got a UFS off the classifieds. Finally got to it this evening. I spent the last couple of days watching youtube videos, especially bishopheals (very comprehensive).

I installed a HH .357. Everything looks OK. But I am getting dry hits. Juice control opened all the way. Air control open half a turn. I can drip juice down the mouth piece all is good. After 5 or 6 hits they turn dry.

I really want to get this to work well. Any advice anyone can offer would be greatly appreciated.

Thanks.

Probably a stupid question but is it a sealed post HH357?

 

[Aal_]

Its funny because my hh357 can't stop giving me vapor it seems that I cannot get it to seal well in the ufs maybe its top is not as flat as it should. Back to your problem. Try to close completely the air and open liquid and make a suck. Then open air control is there juice that went into the atomizer?

 

[SheerLuckHolmes]

Probably a stupid question but is it a sealed post HH357?

I HH web site does not say anything about a sealed post. How would I determine this? I used this 357 for 24 hours as a dripper and air flow was fine. If sealed post it would not have drawn air as a dripper, or would it? How could I determine this?

 

[SheerLuckHolmes]

I decided to take the 357 out and began to unscrew the top cap. As I began to unscrewed it I saw a couple of bubbles travel up through the juice. Could I have everything screwed too tight and there is a vacuum lock keeping the HH from feeding?

 

[imeothanasis]

if you have a bad feeded atomizer, then dont screw a lot the small cap that sits on big refilling cap Sheer. That way you will let atmospheric air to push liquid inside atomizer

 

[LongHaul]

I have the same problem with my killer 705 in my UFS. No matter what I do it feeds without having to open the flow control......

 

[imeothanasis]

That means that this atomizer doesnt sit well on UFS Long. Is it shiny and straight where it makes contact with the base when base is closed?

 

[LongHaul]

Yea and I have tried 2 different extensions but its not a big deal the Ithaka is almost here and the Achellies isn't too far off

 

[imeothanasis]

Check if the holes of 510 threads are below the base Long. If you see a scratch under the base (because drill scratched the base while it was making the holes) then liquid escapes from there

 

[LongHaul]

Will do the next time I pull it apart. It's not a big deal as the amount of leakage is about perfect for what I vape it mainly when I let it sit too long without taking a toot