Univapo is a new brand in the world of vape, after the great success with the Zumix Pod Kit has released a new mod Pod with the name Unico.
The Univapo Unico mod pod arrives with this package, the manufacturer's logo, a photo of the product and the warnings are located in the front.
On the back we find again the warnings and the usual logos and brands.
On the side there are: the scratch and check, the Univapo email address, the indication on the color of the product, the listed content, finally the Univapo social links.
Package contents:
— 1 Unico 49W by Univapo
— 1 Mesh Coil 0.3 Ω 30-43W
— 1 Mesh Coil 0,6 Ω 18-25W
— 1 USB cable
— 1 lanyard
— 1 User manual
— 1 Warranty card
Dimensions and technical characteristics:
106×27,6×27,35 mm
Weight: 92gr
Construction material: plastic and aluminum
Battery capacity: 1500mAh integrated
Cartridge capacity: 4.0ml (2 ml TPD)
Output power: 5-49W
Voltage range: 0.0-4.2V
Operating mode: VW
Resistance range supported: 0.3-2.0 Ω
Available resistances: 0.3 / 0.6 / 0.8 / 1.2 Ω
Color screen: 0.96”
Charging current 1A
Protections:
— Over-charge
— Over-discharge
— Over-current
— Short circuit
— High temperatures
— 10s Cut-off
Available colors:
How the Univapo Unico is made:
The upper part of the Unico has two shaped cutouts for the flow of air to the coil, in the cartridge compartment there are four magnets and two gold-plated pins.
The lower part of the Unico shows: the C E mark, the disposal logo and the word Univapo.
Mine is the Carbon Fiber version, the side panels have this texture, their surface finish is glossy.
The same carbon look texture is found on the rear panel, this time the finish is rough.
The front panel is black with the words Unico in white, the Fire button is made of plastic with a square shape, the 0.96 “color screen is arranged vertically, the balance with the Up and Down buttons horizontally, finally on the bottom we find the Micro-USB charging socket.
Cartridge features:
The weight is 19gr, its content is 4ml ( TPD 2 ml)
The cartridge is fume colored and is threaded at the bottom.
The air control ring is in turn threaded internally to contain the coil and externally to be screwed to the cartridge.
The Univapo Unico mod pod arrives with this package, the manufacturer's logo, a photo of the product and the warnings are located in the front.
On the back we find again the warnings and the usual logos and brands.
On the side there are: the scratch and check, the Univapo email address, the indication on the color of the product, the listed content, finally the Univapo social links.
Package contents:
— 1 Unico 49W by Univapo
— 1 Mesh Coil 0.3 Ω 30-43W
— 1 Mesh Coil 0,6 Ω 18-25W
— 1 USB cable
— 1 lanyard
— 1 User manual
— 1 Warranty card
Dimensions and technical characteristics:
106×27,6×27,35 mm
Weight: 92gr
Construction material: plastic and aluminum
Battery capacity: 1500mAh integrated
Cartridge capacity: 4.0ml (2 ml TPD)
Output power: 5-49W
Voltage range: 0.0-4.2V
Operating mode: VW
Resistance range supported: 0.3-2.0 Ω
Available resistances: 0.3 / 0.6 / 0.8 / 1.2 Ω
Color screen: 0.96”
Charging current 1A
Protections:
— Over-charge
— Over-discharge
— Over-current
— Short circuit
— High temperatures
— 10s Cut-off
Available colors:
How the Univapo Unico is made:
The upper part of the Unico has two shaped cutouts for the flow of air to the coil, in the cartridge compartment there are four magnets and two gold-plated pins.
The lower part of the Unico shows: the C E mark, the disposal logo and the word Univapo.
Mine is the Carbon Fiber version, the side panels have this texture, their surface finish is glossy.
The same carbon look texture is found on the rear panel, this time the finish is rough.
The front panel is black with the words Unico in white, the Fire button is made of plastic with a square shape, the 0.96 “color screen is arranged vertically, the balance with the Up and Down buttons horizontally, finally on the bottom we find the Micro-USB charging socket.
Cartridge features:
The weight is 19gr, its content is 4ml ( TPD 2 ml)
The cartridge is fume colored and is threaded at the bottom.
The air control ring is in turn threaded internally to contain the coil and externally to be screwed to the cartridge.