Uwell Crown coils for eVic VTC Mini?

[TeflonRon]

I have the VTC Mini on the way and this will be my first time trying the subohm tanks. Should I buy the .5 or .25 dual coils for the Crown?

I also have subtank mini on the way and was looking at the Atlantis V2's.

Thanks!

 

[JMarca]

Either or, the mod can be upgraded to 75w so you'll have no problem with whatever you use, just be careful not to go too high on the watts especially with the .25 coils.

 

[TeflonRon]

.25 is for the higher watts I'm pretty sure right? What would be the difference in the 2 coils to me? I've been vaping on the MVP2 and Vamo for awhile now but I'm just taking the step up now.

 

[JMarca]

The .25 you want higher power yes but be careful don't gonuts unless you know your batteries can handle it. Somewhere around 40-50w with a good (minimum 20amp) battery should be ok.

 

[NightShadow]

Generally speaking the lower the resistance, the more power you can throw at them. More power generally equals more heat. If you are still using cigarettes, or recently stopped then a nice hot vape might be what you want. On the other hand if a hot vape is not what you want then a higher resistance would my suggestion.

I just got my crown tank in a few days ago, tried the stock .25 coil it had in it, too hot for me at 30 watts or more, and only producing little wisps of vapor. Using a menthol crystal DIY liquid that little wisp kicks like a mule however, will need to make a MUCH weaker batch for that tank/coil.