Hey guys so I'm currently using the v2 cigs but I'm tired of using the carts and am looking to use the atomizers any suggestions on what Attys I should get for it, I'm pretty sure its an 808 but I'm not sure, plus if I need to know if I need any adapters to use them
V2 cigs and adapters
- Thread starter Havok289
- Start date
- th_trl_thread_readers 0
- Status
808 aka 808D-1 to whatever
check Goodprohets, Altsmoke, Madvapes for adapters
Use standard resistance attys on slim batteries, from 3.0 down to about 2.5 ohm. Any lower and hotter is for the fat battery models and mods
And dripping (drip tip on atty) not recommended on automatic batteries.
check Goodprohets, Altsmoke, Madvapes for adapters
Use standard resistance attys on slim batteries, from 3.0 down to about 2.5 ohm. Any lower and hotter is for the fat battery models and mods
And dripping (drip tip on atty) not recommended on automatic batteries.
Last edited:
Welcome, Havic!
If you're tired of using V2 cartos (I vaped Red), you can get blank cartos and juice from various vendors at much less cost. V2 is 808 and cartos can be found at Liberty-Flights.com or Madvapes, 5 for $7-8. Juice, well, hundreds of vendors and flavors it seems. Good luck.
Edit: or you can use attys, which is what I use on a different model now.
If you're tired of using V2 cartos (I vaped Red), you can get blank cartos and juice from various vendors at much less cost. V2 is 808 and cartos can be found at Liberty-Flights.com or Madvapes, 5 for $7-8. Juice, well, hundreds of vendors and flavors it seems. Good luck.
Edit: or you can use attys, which is what I use on a different model now.
Cool thanks guys but I have one more question, I know the cartomizer size is the k808 or whatever, does that apply to battery size too?
Or is it a different number?
Or is it a different number?
hi bud, I got v2 aswell and yes the batteries are a kr808d-1 style aswell. If you go to their website and look under batteries or excessories i think thats were i found the information when i was try'n to figure it out.
Good luck!
Good luck!
Yes V2 is KR808D-1 threaded and I think similar to the original manufacturer and Vapor4Life model rather than the rubberized model (with small button manuals) of Smokeless Image and Bloogplanet. The V2 battery or carto center post may be adjusted differently - I think sometimes people need to lift the center post of V2 cartos to make contact with other KR808D-1 batteries?
I don't know which length battery V2 uses. If you just measure the colored part of the battery the ones around 78mm are standard size and the ones around 65mm are shorty size and less battery charge.
KR808D-1 can use a DSE901 (standard resistance) atomizer with no adapter. Other model attys need an adapter.
And KR808D-1 can use cartos from Vapor4Life, Smokeless Image, Bloogplanet Maxxfusion, Halocigs G6
I don't know which length battery V2 uses. If you just measure the colored part of the battery the ones around 78mm are standard size and the ones around 65mm are shorty size and less battery charge.
KR808D-1 can use a DSE901 (standard resistance) atomizer with no adapter. Other model attys need an adapter.
And KR808D-1 can use cartos from Vapor4Life, Smokeless Image, Bloogplanet Maxxfusion, Halocigs G6
mouse i have a question 4 u. I bought some cartos from litecigUSA and they hold more juice and alow for bigger draws sadly they only work on my pass through and one of my three batteries. I have 2 manuels and one automatic. Any advice?? I am using V2 kr808
So just to get this straight you mentioned the dse901's, do all 901's fit with no problem onto a kr808?
PS havok it's under accessories and adapters. They really should be more clear with their customers about what kind of batteries they are, it should be listed under battery description but its not. Guess they dont want people jumping ship. But overall i'm happy with them even if i overpaid slightly for my ultimate kit.
Yes, fortunately for me my ex girlfriends mother paid for them to get us to quit smoking, however our break up made me start smoking again lol. The good news is I've turned back to the ecig so hopefully i'll get back on track.
However I am definitly over the carts, seems I can't find any I like and would prefer the stronger hits from the attys, just trying to find a good one to go with
However I am definitly over the carts, seems I can't find any I like and would prefer the stronger hits from the attys, just trying to find a good one to go with
I have use DSE901 standard resistance attys on KR808D-1
Not my favorite attys but they were nice while they worked.
Not my favorite attys but they were nice while they worked.
what nic r u using maybee up the nic level it will satisfy u.. If you just want more vapor you might have to get a big clunker device. also the passthrough @ 5 volts puts out a good amount of vapor but you always got to be pluged in.
I'm using the 24mg's it's from a shop here in the mall, i don't really mind the big clunkers truly and i've thought about getting a passthrough for my computer that's usb just for when I'm sitting around here on the computer
hmm i top out at 24 mg's but every juice is different as far as vapor production and nicotine absorbtion.
I have v2 batt's and I switched to some ss fluxomizers. They are just like the clearomizers, but they are metal jacket so no cracking or leaking. They don't have polyfill, and mine hold 1.8ml of juice. They produce good vapor and i don't have to keep refilling them. Gotvapes.com sells them. the new deluxe fluxo's are supposed to be even better. Also vapor junction sells some also for the 808's. I forget what they call them now. Once I got these, i pretty much threw my carto's away... just a thought...
Well theres one of your first problems. Juices from the mall are not all that great in throat hit or flavor. Try some juice from one of the vendors here on the forums.
- Status
Similar threads
- Locked
