2.4ohms is fine anywhere between 6.5-8w. Sweet spot is around 8w. But if vape is too warm, reduce to 7.5w
Different users different outcomes. Play around with it till u are satisfied.
- Status
2.4ohms is fine anywhere between 6.5-8w. Sweet spot is around 8w. But if vape is too warm, reduce to 7.5w
Different users different outcomes. Play around with it till u are satisfied.
For some reason my vamo ohm reading got problem again.
When nothing attached it's 2 ohms, used to be 9.9.
When my protank attached it's 0.2.
But the safety feature does not cut it off so still can vape.
Should I just take the resistance of the coil and treat that as the resistance?
When nothing attached it's 2 ohms, used to be 9.9.
When my protank attached it's 0.2.
But the safety feature does not cut it off so still can vape.
Should I just take the resistance of the coil and treat that as the resistance?
Lol. clean the contact points and use the curved part of a paperclip to push that rubber inner. Then dun screw on too tight.
wah epic reply all my posts ah haha.
tried cleaning but still same leh.
is it ok to vape when it shows such low resistance?
or should i play safe and choose marlboro for now cause the voltage and resistance always same on that.
tried cleaning but still same leh.
is it ok to vape when it shows such low resistance?
or should i play safe and choose marlboro for now cause the voltage and resistance always same on that.
No, do not vape if it shows low. U may either kill ur batt or ur tank. U wouldn't want ur batt exploding in ur face right?
Actually if u did not screw on tight, u will realise the tank can still be moved a little left or right. Try doing that and test the resistance again. Or if u already loosen the tightness, and it still shows low, try loosening just a little more and see if it works.
Actually if u did not screw on tight, u will realise the tank can still be moved a little left or right. Try doing that and test the resistance again. Or if u already loosen the tightness, and it still shows low, try loosening just a little more and see if it works.
yea true.
sian.. 4-5 weeks nvr touch analog alrdy.
have a feeling will buy a pack by today or tomorrow.
tio virus liao lar.... must buy anti virus....... joking hor mai TL.
Buy what brand de anti virus. Whaha..
I think u try adjusting that rubber tubing with a curved part of a paperclip. Try pushing the rubber in using a circular motion around the rubber. Then try and see if it works.
Lol. Seriously, hold ur vamo close to ur heart, walk to the window, open the window, give it a look with watery eyes, give it a peck, say goodbye and stretch out ur arms with it, then open ur palms wide.....
PS. Make sure no one is walking down below.
PS. Make sure no one is walking down below.
Yeah go do some research and see how la.
Anyway it works again.
Was at a kiosk going to buy analogs.
Decided to give it one more go.
Started whacking the connection area into my palm and resistance went to 3.7.
Reset the thing and now back to 2.5.
Anyway it works again.
Was at a kiosk going to buy analogs.
Decided to give it one more go.
Started whacking the connection area into my palm and resistance went to 3.7.
Reset the thing and now back to 2.5.
So izzit back to normal. Errolng I know how u feel with it's just like our pV's without batt. Wacking yr vamo. Keke.
- Status
Similar threads
