VAMO tastes burned no matter what help!!

Status
Not open for further replies.
i am using all 50/50 juice from mr e liquid... some 12 mg some 6 mg NIC... my first two or three pulls on the atty are decent then burned top it off with 2/3 more drops still burns.. i also noticed if i take three proper tasting and hitting drags and then sit in standby for about 3-5 mins dont touch anything and then drag again its burned all the sudden... im beginning to think its a defective device what do you guys think?
 
wv2win.. what cartos do you recommend for the vamo.. I am pretty new to the mod world used a v2 and a joye510 for a long time.. my first mod... I am actually researching some good vamo cartos clearos tanks.. what have you? what do you recommend to vape on ? Dripping is okay.. but I don't like having to drip all the time want something that holds maybe a ML + just so i dont have to fill so often right now im vaping about 1.5-2 ML a day so I don't need or want a huge tank just something that will keep me filled for a few hours suggestions anyone? Something that works well on the vamo bc these ce4s are spotty this tank i cant figure out the only thing I've managed to start to get working over the past two days decently are the bridgeless 2.0 OHM Cisco Atties...
 

Clearo-Mizer

Super Member
ECF Veteran
Jan 21, 2013
588
449
59
Woodstock Ga
Actually ryguy...i would find a B/M..and put your devise in the hands of someone who can trouble shoot it for you...if you are burning new 2.0 coils with 3 volts...something is not right...are you 100% sure you are in rms mode?....i can hardly get a 1.5 coil to do anything descent with 3 volts much less fry juice on it..
 
yes 100% positive I definitely feel something is not quite right... clearo-mizer. I'm sorry im pretty nrew at this what is a B/M? Its not even so much a burnt juice taste it tastes like burnt atty but the wicks in everything are saturated and filled even 2 hits after dripping 5+ drips on an atty. I have messed around for hours and the atty seems to work pretty stable now as long as i drip frequently.. but the ce 4s and the mini nova no matter what are still burning... not making sense all of these products are brand new too! even changed the heads on the nova tank
 

Myrany

Vaping Master
ECF Veteran
Verified Member
Apr 14, 2013
8,477
44,353
Louisiana
Just to satisfy one more possibility. Try adding a few drops of distilled water to your 50/50 juice and see if the clearos wick better. I have been noticing I have to be really careful with my CE5s now that I am running 50/50. It is a thick enough juice to not wick to a top coil really well without alot of tilt a whirl swirl (very slowly) to deliberately get juice on the head.
 

Clearo-Mizer

Super Member
ECF Veteran
Jan 21, 2013
588
449
59
Woodstock Ga
yes 100% positive I definitely feel something is not quite right... clearo-mizer. I'm sorry im pretty nrew at this what is a B/M? Its not even so much a burnt juice taste it tastes like burnt atty but the wicks in everything are saturated and filled even 2 hits after dripping 5+ drips on an atty. I have messed around for hours and the atty seems to work pretty stable now as long as i drip frequently.. but the ce 4s and the mini nova no matter what are still burning... not making sense all of these products are brand new too! even changed the heads on the nova tank


Yeah man...i feel for you bro...it can be a pain to get your rig dialed in...dont give up man its worth it when you finally get a good system working well
A b/m is vape talk for "brick and morter"...or retail store...i know the Jersey area has some of the best stores in the country i would find one and see if they can check the output voltage under load and see it your vamo is firing full on 15 watt or 6 volts regardless of the setting...i personally have never heard of it with a vamo bit i gues in the world of electronics anything is possible..good luck bro
 
Just to satisfy one more possibility. Try adding a few drops of distilled water to your 50/50 juice and see if the clearos wick better. I have been noticing I have to be really careful with my CE5s now that I am running 50/50. It is a thick enough juice to not wick to a top coil really well without alot of tilt a whirl swirl (very slowly) to deliberately get juice on the head.

Myranny thank you for this I am definitely going to try it.. I wondered about that as well.. maybe my 50 50 is too thick for these coils. Thanks will let you know how it goes!
 
Status
Not open for further replies.

Users who are viewing this thread