Ok cool. I was probably going to order from vipervapes anyways cuz im a cheapskate but I like to have the best model available too lol.
RDA VECTOR RDA™ by VLS
- Thread starter Mr.Mann
- Start date
- th_trl_thread_readers 0
- Status
So how do you like it, is this the dt solution we've been waiting for?
Edit-nvm, I've got my eye on the comp cap now that it's been brought to my attention...
*drool*
Last edited:
VLS listened to everyone and now they made this! The vector comp cap.
Sent from my VS986 using Tapatalk
No freaking way that's exactly what I was talking about, this is literally the perfect solution to the problem. This just proves it, VLS is a really awesome company that's putting out some amazing hardware. Do you know where you can buy these and what they go for? Thanks for showing us this Heisenberg = ]
Last edited:
Hey guys, I finally got some photos of my standard build so I'm going to post them, hopefully some of you can offer some helpful recomendations for tweeks to try. This is a dual coil (obv.) 24 gauge 7 wrap with a 3 mm id.
How much were they? I've got my velocity rda, along with a few other Vape goodies, arriving today (I'm dying with anticipation) and I'm thinking it may be a good idea to grab some of those screws as backups, since I've got the tendency to strip out hex screws. I've already gone through all of my spares on my vector and I'm just dreading the day when one of the installed screws strips...I just don't know what I'm going to do.
Yeah it looks pretty nice right! I feel like it should come with the vector honestly but it probably won't. I think this is the way the vector should of came in the first place or have the option. And I'm not sure how much or when it's released, they haven't said yet.
Sent from my VS986 using Tapatalk
twisted 28g dual coil 7 wraps 3mm ID 0.45ohms flavor is okay still finding a build also to maximize this rda
Now that it's settled in and everything it's reading .37 ohms, Initially it was reading in at .34
I'd definitely agree with you, but we all know there would be the stampede of people throwing a fit because it didn't come with a drip tip...
Ya, I have definitely had builds that put out flavor that blew me away, so I know the vector can perform better than it is with most of my builds. I just don't know what I need to adjust or change to kick it into next gear. I'm also getting a lot of spit back, but that's pretty much been a constant since I got it =\
twisted 28g dual coil 7 wraps 3mm ID 0.45ohms flavor is okay still finding a build also to maximize this rda
Btw, has anyone tried the Sapor rda? I was really blown away by it. Like I got the velocity clone by tobeco at the same time and was sort of disappointed bynit, especially after all the insane hype about it. Like even for a hyped device this was super hyped. It really leaks a lot also, smh
I tried a Clapton coil on it but I wasn't too crazy about the performance? Maybe too many wraps...? It's 26 gauge claptoned with 32 gauge. I did 7 wraps around a 3 mm bit, came out to 0.55 ohms. I think I'm gonna try 5 wraps around a 2.5 mm bit, hopefully that'll do the trick. This build is on the velocity btw and I'm trying to find a better build for it. If anyone thinks it'll help them give better advice/insight, I can post some pics of the build...
I tried a Clapton coil on it but I wasn't too crazy about the performance? Maybe too many wraps...? It's 26 gauge claptoned with 32 gauge. I did 7 wraps around a 3 mm bit, came out to 0.55 ohms. I think I'm gonna try 5 wraps around a 2.5 mm bit, hopefully that'll do the trick. This build is on the velocity btw and I'm trying to find a better build for it. If anyone thinks it'll help them give better advice/insight, I can post some pics of the build...
Last edited:
I love this thing! .26 ohm coil in now, it could be a little lower, but it's dense and flavorful and doesn't leak. You do have to build the coils pretty out to the side and leave a lot of room around them for the airflow to work well but the extra space under the negative posts fits cotton perfectly, leaving room for the air to "scoop up the flavor" as VLS calls it
I don't own a vector but lately I've been looking into top airflow atty's. I've seen the Sapor (I may buy it just because a local B&M has them for $30), and I think of it as a trial run in a way before I drop $60+ into a top airflow atty. I've been looking into the Vector and the Aeolus v2, and while I understand the deck "problem" with the Aeolus, I don't see it as such a problem, because I know the gap between atty and mod is part of the 2 piece deck design of it. Now, while the Aeolus accepts 510 drip tips, I understand the Vector does not. And I don't want to have to buy another piece just to have it fit standard DT's.
I like features of both atty's and I understand the drawbacks of both. So could someone help me out and sway me in one way or the other?
I like features of both atty's and I understand the drawbacks of both. So could someone help me out and sway me in one way or the other?
Tom, I own 4 Vectors all bottom feeders. I use the stock top cap and tip woth zero issue. The build deck is as easy as they come for high dual coils just under the ample airholes. Flavor and vapor is the best for me. My build on everyone of them is a 7/6, 2.5mmID, 26gA1 comes in at .4. It's a sure thing for me and I highly recommend.
I have a comp cap coming. I had the rda for about a month and just could not get past that SS driptip. I slightly bored out and trimmed the chuff tip from a little boy clone. One c clamp later to press fit em and I am now really diggin this rda.
I'm wondering how easy it is to adjust the airflow with the comp cap. One of the advantages of the original I think was the drip tip and cap being one piece.
Just got my vector comp cap with my 2p obrero drip tip.
I posted earlier in this thread about my mxv2 base working with the vector topcap. This however exited me way more! A coworker of mine had a velocity mini clone from fasttech that he didn't want so I gladly took it off of his hands, the rda itself is terrible, the top cap barely even sits in place. BUT I switched out the base o rings for the spare vector ones and the vector top cap now fits on the velocity mini base! Coil building heaven with the best top airflow design yet, worth the 8.50 or so even if I hadn't got it for free!
- Status
Similar threads
- Locked
