Vision Spinner 1300mah vs eGo-VV PT

[junkman]

Yes, I did. I bookmarked it along with a ton of others. In fact, I'm leaning heavily toward
it. I'm just skiddish about it being only 900 mah. I'm a very heavy vaper, and I can run
through a bat pretty quick. Well, it seems quick, but it's actually a few hours I guess.

But still.....

Fact is though, I may well try that one.

I've also got Lave Tube in my head (not a pretty picture).

What I want is everything for very little. A lot of units now come with an ohm checker,
and I would like to have that feature for rebuilding attys and stuff.

Thanks for bringing that back to my attention, junkman.

Well, actually 900mah is probably overstated. The protected 900mah batteries that come with it are junk and you probably need to run IMR batteries instead, which I think would be 600mah. But carrying a couple extra AA sized batteries is not a problem for me, and the ability to switch in a new one is something that puts it over the top IMO.

 

[bivie]

Well, actually 900mah is probably overstated. The protected 900mah batteries that come with it are junk and you probably need to run IMR batteries instead, which I think would be 600mah. But carrying a couple extra AA sized batteries is not a problem for me, and the ability to switch in a new one is something that puts it over the top IMO.

Good point. I'm not used to thinking in terms of having pre-charged batteries ready to
go. I'm used to juggling my PVs to make sure they stay charged.

 

[junkman]

Well, My spinner just apparently died. It just flashes when I push the button and when I put it in the charger nothing happens. Charger light stays green.

I have to check but I think I got this on Monday.

That is not accepatable.

Actually, delivered to me evening of the 15th. Still 11 days is not acceptable.

 

[bivie]

Well, My spinner just apparently died. It just flashes when I push the button and when I put it in the charger nothing happens. Charger light stays green.

I have to check but I think I got this on Monday.

That is not accepatable.

Actually, delivered to me evening of the 15th. Still 11 days is not acceptable.

Mine does that if the connection is bad or the device I'm attaching to it is bad. A burned out]
atomizer will cause that. Pushed-in battery posts does that, too. I have a Twist that only
wants to work with M3 clearomizers and nothing else. Spinner's been holding up well for
months.

 

[txtumbleweed]

Where can I shop for one?

The one I linked is available for $31 shipped. Is the L-rider similarly priced? I would like to check it out.

They are new and no vendors have them yet but should be available in a week or so. I'm in a co-op for them and mine should be here in a week or so too.
I think they will be priced a little more than 31.00 but I'm not sure.

 

[elmattias]

Well, My spinner just apparently died. It just flashes when I push the button and when I put it in the charger nothing happens. Charger light stays green.

I have to check but I think I got this on Monday.

That is not accepatable.

Actually, delivered to me evening of the 15th. Still 11 days is not acceptable.

sounds like a pin needs to be pulled out...

Sent from my EVO using Tapatalk 2

 

[junkman]

Mine does that if the connection is bad or the device I'm attaching to it is bad. A burned out]
atomizer will cause that. Pushed-in battery posts does that, too. I have a Twist that only
wants to work with M3 clearomizers and nothing else. Spinner's been holding up well for
months.

sounds like a pin needs to be pulled out...

Sent from my EVO using Tapatalk 2

Actually, strange because I let it sit for a couple hours tried it again and it vaped for 1 or 2 mintues, then, flashed out again. But this time I put it on the charger and it lit up.


Weird and worrisome - but better than dead. I looked at the warranty from Gotvapes and it is only 7 days on batteries???

 

[bivie]

I looked at the warranty from Gotvapes and it is only 7 days on batteries???

Yep. This companies selling this stuff don't even back the products they sell. If
you want that, you got to shell out dough in the hundreds. Warranties on PVs
suck.

 

[txtumbleweed]

Yep. This companies selling this stuff don't even back the products they sell. If
you want that, you got to shell out dough in the hundreds. Warranties on PVs
suck.

Apollo gives a one year waranty on their PV's.

 

[txtumbleweed]

They are new and no vendors have them yet but should be available in a week or so. I'm in a co-op for them and mine should be here in a week or so too.
I think they will be priced a little more than 31.00 but I'm not sure.

Here is a picture of the Rider Robust. They are a little bigger than a 650 Twist and have the same circuitry as the Rider Lambo 4 and includes ohm checker. They use a 14500 IMR Battery.
This is the first supplier I've seen that has them.
http://www.sweet-vapes.com/components/com_virtuemart/shop_image/product/ROBUST6Vision.jpg

 

[45root]

Actually, strange because I let it sit for a couple hours tried it again and it vaped for 1 or 2 mintues, then, flashed out again. But this time I put it on the charger and it lit up.


Weird and worrisome - but better than dead. I looked at the warranty from Gotvapes and it is only 7 days on batteries???

I had the exact same problem. I sent mine back for an exchange. That was almost 2 weeks ago. I am now waiting on a reply to when they will have more in stock. I have been waiting on a reply since wednesday. I am actually getting kind of ....... But alas I am at the mercy of the seller. If it takes this long just to find out when they will be in stock, how long will it take for me to receive it...

 

[junkman]

I had the exact same problem. I sent mine back for an exchange. That was almost 2 weeks ago. I am now waiting on a reply to when they will have more in stock. I have been waiting on a reply since wednesday. I am actually getting kind of ....... But alas I am at the mercy of the seller. If it takes this long just to find out when they will be in stock, how long will it take for me to receive it...

Mine has been working fine since this incident. I did get an RMA but now am not sure if I should send it in as it seems to be fine again???