So i have a vision Spinner 2, and I also have an extra non working EMOW Aerotank. I even bought a new 2.0 Ohm Coil. I just really want to know how to fix this because I dont want to waste anymore time trying to fix it myself. Please help!
Vision Spinner II Wont Work With EMOW Aerotank
- Thread starter Liam Sadie
- Start date
- th_trl_thread_readers 0
- Status
Oh and by the way, I have a JustFog tank that works perfectly fine if that helps anyone lol
The first thing I would check, is if you have a digital multimeter, do a basic continuity test between the center pin and the 510 threads while you have an atomizer attached. This will do the basic test to see if electricity can get to the coil from the 510. If the multimeter doesn't show a connection from the center pin to the 510 threads, then something is not connected somewhere.
The second thing I would test, is to do a resistance test with a multimeter. It should come close to the ohm reading of what the coil is getting. This will test to see if you have a short in the atomizer. If there's a short, it will be too low of a resistance for the spinner 2 to work, and the spinner 2 won't function.
There can be several things wrong with why the emow is not working with the spinner. It could be anything from an incompatible ohm reading, to the center pin on the spinner 2 is too low. Without more information, we can't really guess as to what could be the problem. Here are some basic steps that might help us figure out what's wrong.
Does the Emow work on another device?
Have you tried it on an ohm meter? if so, what did it say?
do you notice anything else wrong with the tank? is everything screwing in smoothly?
How does the 510 connector look? is the center pin flush with the threads?
The second thing I would test, is to do a resistance test with a multimeter. It should come close to the ohm reading of what the coil is getting. This will test to see if you have a short in the atomizer. If there's a short, it will be too low of a resistance for the spinner 2 to work, and the spinner 2 won't function.
There can be several things wrong with why the emow is not working with the spinner. It could be anything from an incompatible ohm reading, to the center pin on the spinner 2 is too low. Without more information, we can't really guess as to what could be the problem. Here are some basic steps that might help us figure out what's wrong.
Does the Emow work on another device?
Have you tried it on an ohm meter? if so, what did it say?
do you notice anything else wrong with the tank? is everything screwing in smoothly?
How does the 510 connector look? is the center pin flush with the threads?
Moved to New Members from Simple Solutions
Simple Solutions is to assist the Beginning Vaper with getting started
Simple Solutions is to assist the Beginning Vaper with getting started
Have you cleaned the contacts? Take a tissue and clean the spinner contact (where the tank screws in), and clean the bottom of the tank (that is, the bottom of the coil - the part that connects to the spinners contact).
I have a spinner and so do two of my friends, mine and one other isn't really sensitive while the third one won't fire unless it's clean. Beats me why but that's my guess if the spinner works and the coil is made correctly (which i assume it is since you bought a new one)
The emow fits perfectly on the spinner and should work in any case.
I have a spinner and so do two of my friends, mine and one other isn't really sensitive while the third one won't fire unless it's clean. Beats me why but that's my guess if the spinner works and the coil is made correctly (which i assume it is since you bought a new one)
The emow fits perfectly on the spinner and should work in any case.
- Status
Similar threads
- Locked
- Locked
