Vision stone 3 tank cartomizer in stock

[tumbafox]

Its Here - The VISION STONE 3 tank mod

2 sites that I can find:

Vision Stone Clearomizer Version 3 | E-Cigarette Atomizers by EsmokerOnline! | eSmoker Online
Esmokeronline
Quantity Available: 192 as of 12:45 am Sunday March 11
Price $9.99

Vision Stone III | Virgin Vapor | Electronic Cigarette Organic e-Liquid | Electronic Cigarettes
Virgin Vapor $12.95 limited quantity. They also have the Vision Stone 2 in Stock at:

Vision Stone | Virgin Vapor | Electronic Cigarette Organic e-Liquid | Electronic Cigarettes
Price $10.95

 

[Slurp812]

It says 3rd gen, but is doesn't mention the difference between that and the II....

 

[Dieseler]

type gotvapes in the search engine there is a picture of the new innards of version 3.
I was hoping for a permanent 510 connector in the bottom cap so a ce2 could easily be screwed in when replacement is need.
Nope
One will have to buy the proprietors parts for it which consist of a ce2 airtube with its coil cap and its 2 coil wires with 2 grounding springs and by the looks of it affix to the bottom cap. Too much junk inside that tank for me.
What will replacement parts cost ?
When will they be available after another revision like what has happened with the first 2 stone tank and the parts are still not available.

I buy a 5 pack of ce2s in there stainless tubes with a mini pipe cutter take them out in a matter of minutes all for the cost of 9.00 for 5 of em in the ohms i want and pop them in anothers stainless steel tank since moving on from the vision stone tank.
Thats just me as i have moved on.

 

[Errol]

type gotvapes in the search engine there is a picture of the new innards of version 3.
I was hoping for a permanent 510 connector in the bottom cap so a ce2 could easily be screwed in when replacement is need.
Nope
One will have to buy the proprietors parts for it which consist of a ce2 airtube with its coil cap and its 2 coil wires with 2 grounding springs and by the looks of it affix to the bottom cap. Too much junk inside that tank for me.
What will replacement parts cost ?
When will they be available after another revision like what has happened with the first 2 stone tank and the parts are still not available.

I buy a 5 pack of ce2s in there stainless tubes with a mini pipe cutter take them out in a matter of minutes all for the cost of 9.00 for 5 of em in the ohms i want and pop them in anothers stainless steel tank since moving on from the vision stone tank.
Thats just me as i have moved on.

It sure has been frustrating reading five days for the past two+ months which has been a bunch of BS as they were never going to send replacement parts at two or three dollars for the V1 or V2.

What ce2s are you talking about and do most or all these clearomizers have the same heating coil and cup as the Stone with ohm rating being the only variable?

Errol

 

[tumbafox]

Gotvapes now has a limited supply of tanks and innards for Stone 2 and 3. Hurry

 

[Pilirock]

I have to agree with dieseler on this, I bought countless Ce2's, Vision Stones, Stardusts, etc.. and I'm not gonna say gotvapes is the only one because there is bunch of companies that do it. I JUST DON'T UNDERSTAND HOW WE PAY $13 FOR A TANK THAT LEAKS, BURNS, DRYBURN, GURGGLES, AND many other problems , same with the 5 revisions of CE2's and Vision extremes, etc, Ce2's you need to flip the o-ring and take the cap off, I feel like a damn scientist. I gave up on it all around as well, Boge 3.0 tank , no hassle , boge goes bad, replace !!! no leaks , no mess, NO FUZZ !!! I have CE2's and Extremes going up for sell on the classies soon , good luck to you all !!!

 

[Dieseler]

Errol i buy the stainless tube ce2 in regular size 2.6 -2.8 ohms they come in a 5 pack, there not to easy to fine but are available from some vendors.
These look just like regular stainless cartomizers but have no filler just 2 wicks and a coil and 2 cover gaskets inside the tube .
I fill them with a syringe and screw it on top of a 3.7 volt device as is.

Another way is i use a mini pipe cutter and cut the tube until i hear tube cracking and pull out the ce2 and save the top part of tube and insert thru grommet in my acorn tank from parkesvaping. I then use the top have of tube that is left over with the gaskets and slip thru the top grommet of acorn a little bit then screw that top cap on , once cap is screw all the way down i gently push the tube a little over the ce2 coil.
If i hold the tank upside down i will get gurgle in air tube yes and i have to unscrew from device and blow thru mouthpiece to clear it.
I try not to vape upside down not fill tank full .

I also did a slight mod with the new Arryv4 stainless 5 ml tank in similar fashion by cutting out a ce2 but on top of the coil i use the vision stone nipple and then screw the top cap of tank Arry's Actv4 on. Works very well.
Arry has made another run of the Act v3 tank as well the v3 and v4 tanks are made for carts mind you but i use them slightly modded for ce2 cut out of there tubes in these tanks. i have per-ordered ArryActv3 tank to try .

Using Ce2s in this fashion are my favorite vape, were all different though.

Best to you.