Please start selling replacement inner plugs like you do for the vision giant. They wear out and start to leak
Vision Stone 3
- Thread starter tumbafox
- Start date
- th_trl_thread_readers 0
-
- Tags
- vision stone 3
- Status
You've worn out an inner plug on a v3? Didn't the v3's just become available a few days ago? Or am I misunderstanding something?
I noticed it my my vision giant which now has a small leak when I vape upside down. I assume its the same with the Stone
I received the vision stone version 3 today. Is there any chance there are any directions or video's on just how to take the old innard out and put the new one in?
Directions in the package would have really been nice.
Directions in the package would have really been nice.
This is true of all vape supplies in my experience. I did learn my lesson with my stone 2 when I broke it as soon as I opened it. I come here and look for guidance first now.
I'm sure someone will be along shortly to provide you with directions.
actually, i too am having a pretty bad leaking problem. it seems that its leaking from threaded area on the bottom of the tank as well as leaking into the air tube. at first i thought maybe i dripped juice on my fingers when filling it but after watching itfor a while, i found that it did leak ><
When my Stone 2 did that, it was because the rubber seal below the threads wasn't sitting flat against the base. In fact, it was kind of twisted. Once I got that settled and screwed the base on really tight, it was fine. In fact, I got it so tight that I needed a leatherman to unscrew it
I don't know if this might be the case for the Stone 3, though. Not sure how they're different.
I had exactly the same problem BonnyC and found exactly the same solution! My original Stone II is still going strong after regular use for more than a month!
Thank you Bonny! I looked at mine again after reading this post and saw that the innards replacement came without the o ring. No leaks any more.When my Stone 2 did that, it was because the rubber seal below the threads wasn't sitting flat against the base. In fact, it was kind of twisted. Once I got that settled and screwed the base on really tight, it was fine. In fact, I got it so tight that I needed a leatherman to unscrew it
I don't know if this might be the case for the Stone 3, though. Not sure how they're different.
Now if I can get rid of the yucky taste in the new innards I can get a true idea of what this thing is all about. There is black stuff on the new wicks, not sure what's up with that.
When my Stone 2 did that, it was because the rubber seal below the threads wasn't sitting flat against the base. In fact, it was kind of twisted. Once I got that settled and screwed the base on really tight, it was fine. In fact, I got it so tight that I needed a leatherman to unscrew it
I don't know if this might be the case for the Stone 3, though. Not sure how they're different.
What's the chance you could post a pic of the seal you are talking about?
I have a few of these and 2 out of 3 are leaking!
Jeff "Jagellpuff" via iPhone using Tapatalk
Here ya go. If you look between the tank and the base, right at the base there is a small, clearish o ring. That's the best I could get, since there is still a little juice in the tank so I couldn't take it all the way apart.
i've tried screwing it on tighter but it still leaks >< i think the o-ring that came with it is not doing it's job properly. also for some reason i'm getting juice in the air way constantly. i bought 2 spare innards but one of them seems to have half the wick cut right where it meets the cup on one side i really want my stone to work so i can make it my daily carto of choice
i really want my stone to work so i can make it my daily carto of choice 
if its a v3 make sure that before you fill it up that the center tube is screwed in tight
I know exactly how you feel. The leak at the base is better since I put the o ring on from the old one, but I am still fighting the gurgling juice in the airway and the bad taste in the replacement innard. It is also getting HOT, even though I am vaping at the lowest voltage. I will keep trying to fiddle to make it better, but this may not be for me.i've tried screwing it on tighter but it still leaks >< i think the o-ring that came with it is not doing it's job properly. also for some reason i'm getting juice in the air way constantly. i bought 2 spare innards but one of them seems to have half the wick cut right where it meets the cup on one side
It's leaking thru or at the center tube. I think it has to do with the replaceable innards maybe.
Jeff "Jagellpuff" via iPhone using Tapatalk
Jeff "Jagellpuff" via iPhone using Tapatalk
- Status
