VV REOS Part II

Status
Not open for further replies.

Della Cirque

Vaping Master
ECF Veteran
Verified Member
Oct 1, 2011
7,746
30,961
52
Deep East Texas
I've told myself for months now that I am NOT going to catch the VV bug. But, as the time quickly approaches I am scared I might be missing out if I don't grab one. Will getting one mean I need to invest in tons of new atties at different ohms and different batteries, or is this what the VV will eliminate? So for such a newbie question this late in the game.
 

nerak

ECF Guru
ECF Veteran
Verified Member
Feb 12, 2011
25,335
60,415
Fairfield Township, OH, USA
www.facebook.com
I've told myself for months now that I am NOT going to catch the VV bug. But, as the time quickly approaches I am scared I might be missing out if I don't grab one. Will getting one mean I need to invest in tons of new atties at different ohms and different batteries, or is this what the VV will eliminate? So for such a newbie question this late in the game.

Yep, new batteries. Yep, new atty's. Yep, different ohms. Don't know if you would need a different charger for those batteries.
 

WannaGetHealthy

Senior Member
ECF Veteran
Feb 17, 2011
274
397
Texas
Different attys?......Hmmmmm.....IDK about that. I mean, to get the full range of the wattage available to you, you'll want a standard resistance atty, but if you already know what you are going after voltage-wize, there may be no need. TBH, I'm not really looking to switch the voltage around all willy nilly, I just want my reo to be regulated so that I get that "fresh battery" hit from beginning to end......Imma fresh battery fiend.
 

sashwa

ECF Guru
ECF Veteran
Verified Member
Oct 20, 2010
12,119
28,927
Alcatraz
I've told myself for months now that I am NOT going to catch the VV bug. But, as the time quickly approaches I am scared I might be missing out if I don't grab one. Will getting one mean I need to invest in tons of new atties at different ohms and different batteries, or is this what the VV will eliminate? So for such a newbie question this late in the game.

Yep for new batts. But you can use the same attys or cartos. If your attys/cartos are lr, then you just need to use them at a cooler setting. I use my Resurrector 1.7s or my 1.8 IKV attys on my BP all the time with no problems.
 

whatitstrue

Ultra Member
ECF Veteran
Verified Member
Sep 16, 2011
1,768
2,464
Phoenix, AZ.
I've told myself for months now that I am NOT going to catch the VV bug. But, as the time quickly approaches I am scared I might be missing out if I don't grab one. Will getting one mean I need to invest in tons of new atties at different ohms and different batteries, or is this what the VV will eliminate? So for such a newbie question this late in the game.

You will need new batts unless you have the ones needed. AS far as attys theres no resaon to get new ones right away if you dont want to. Just set it at 4.2 volts like when your batts come off the charger and enjoy that fresh battery vape the whole time until the batts die with, the attys you got. Its great!!

I personally use a 2.5 ohm atty between 4.8 and 5.2ish. I rarley ever change the voltage unless some thing feels different. which isnt all that often. I find people new to VV place to much attention or have fears of VV because of the adjustable voltage. But most Folks only have one or a couple voltages they ussually use. Its not like your constantly fidgiting with the wheel changing voltages every other drag. You can if you want then, You find a area you like for what your using and hang out there most of the time...

It's more about it being regulated voltage ( concistant ) as apossed to fixed. With the great advantage of selecting that voltage while your at it.


I pesonaly can't wait for the new VV REOs!!!!!!!!!!!!!!!!!
 

karmakatie

Ultra Member
ECF Veteran
Verified Member
Dec 8, 2011
1,293
2,814
MO
You will need new batts unless you have the ones needed. AS far as attys theres no resaon to get new ones right away if you dont want to. Just set it at 4.2 volts like when your batts come off the charger and enjoy that fresh battery vape the whole time until the batts die with, the attys you got. Its great!!

I personally use a 2.5 ohm atty between 4.8 and 5.2ish. I rarley ever change the voltage unless some thing feels different. which isnt all that often. I find people new to VV place to much attention or have fears of VV because of the adjustable voltage. But most Folks only have one or a couple voltages they ussually use. Its not like your constantly fidgiting with the wheel changing voltages every other drag. You can if you want then, You find a area you like for what your using and hang out there most of the time...

It's more about it being regulated voltage ( concistant ) as apossed to fixed. With the great advantage of selecting that voltage while your at it.


I pesonaly can't wait for the new VV REOs!!!!!!!!!!!!!!!!!

I agree!! It didn't take much to figure out on a VV what I like on it and it stays there, it also seems that the few flavors I like, vape great at the same voltage, so it works really well for me.
 

Della Cirque

Vaping Master
ECF Veteran
Verified Member
Oct 1, 2011
7,746
30,961
52
Deep East Texas
You will need new batts unless you have the ones needed. AS far as attys theres no resaon to get new ones right away if you dont want to. Just set it at 4.2 volts like when your batts come off the charger and enjoy that fresh battery vape the whole time until the batts die with, the attys you got. Its great!!

I personally use a 2.5 ohm atty between 4.8 and 5.2ish. I rarley ever change the voltage unless some thing feels different. which isnt all that often. I find people new to VV place to much attention or have fears of VV because of the adjustable voltage. But most Folks only have one or a couple voltages they ussually use. Its not like your constantly fidgiting with the wheel changing voltages every other drag. You can if you want then, You find a area you like for what your using and hang out there most of the time...

It's more about it being regulated voltage ( concistant ) as apossed to fixed. With the great advantage of selecting that voltage while your at it.


I pesonaly can't wait for the new VV REOs!!!!!!!!!!!!!!!!!
Thanks...that helps me understand a lot better! I had envisioned needing 2.0, 2.5, 3.0 attys and dialing the wheel for every vape session. :facepalm:
 

MXBNW

ECF Guru
ECF Veteran
Verified Member
May 15, 2010
10,355
6,745
NW Washingtion
www.e-cigarette-forum.com
Review of the REO Woodvil VV Mod By REOSMODS.COM




REO Woodvil VV Specs:

Chip set By Notcigs
1. 3-3 to 5.5 volt adjustment
2. 15 watts maximum power output
3. Wheel adjustable voltage dial
4. Improved battery life Technology

6 ml juice capacity

Standard REO juice feed system.

Batterys (2) each

1. AW 18350 700aMh
2. Lifepo3 500aMh
3. Black AW ICR123 750aMh

4. Powerizer RCR123A (Recommended by Notcig for the Buzz)

Should work with most 123 battery's


There is a number of safety factors built in to the chip.

(I will try to get that info and post it) I may have missed a few things so please feel free to add to the spec list.
 

pmoraldo

REO Guru
ECF Veteran
Verified Member
Jul 23, 2011
10,293
30,916
54
Gilbert, Arizona
Different attys?......Hmmmmm.....IDK about that. I mean, to get the full range of the wattage available to you, you'll want a standard resistance atty, but if you already know what you are going after voltage-wize, there may be no need. TBH, I'm not really looking to switch the voltage around all willy nilly, I just want my reo to be regulated so that I get that "fresh battery" hit from beginning to end......Imma fresh battery fiend.
Me too me too fresh battery puffs from start to finish this calls for ................... aaaaaaaa.......................................:banana::banana::banana::banana::banana::banana:
 

whatitstrue

Ultra Member
ECF Veteran
Verified Member
Sep 16, 2011
1,768
2,464
Phoenix, AZ.
Well.... now that these have been beta tested and approved. I assume production will begin at any time?
hyper.gif
 

MXBNW

ECF Guru
ECF Veteran
Verified Member
May 15, 2010
10,355
6,745
NW Washingtion
www.e-cigarette-forum.com
Well.... now that these have been beta tested and approved. I assume production will begin at any time?
hyper.gif

When I talked to Rob tonight I think he said that he has been cutting body's out already. :)

I could not find any thing that I would change.
 

whatitstrue

Ultra Member
ECF Veteran
Verified Member
Sep 16, 2011
1,768
2,464
Phoenix, AZ.
When I talked to Rob tonight I think he said that he has been cutting body's out already. :)

I could not find any thing that I would change.

Great to hear that!!!!! I don't know if I'll be able to sleep tonight. These 2 reveiws are jonesing me out... I new the REOs and BP chip would be a marige made in heaven!!!!!!


Great reveiws guys by the way!! :thumbs: I'd be lieing if I said I wasnt more than jealous.
 
Status
Not open for further replies.

Users who are viewing this thread