I found this about the Buzz Pro electronics. THis was posted by Buzzkill in response to several questions about the Buzz Pro.
Ok to set the record straight voltage regulators control or keep the voltage as constant as possible , so a mod that uses a VR will be more consistent ( some are better than others ) .
the OB ( original Buzz ) used a Linear regulator that produced heat as a by product in the control circuit.
The BP ( Buzz Pro ) uses a switching regulator , it is a BUCK type regulator , we chose this type for several reasons I will explain them here.
1. A Buck regulator uses voltage to produce current ( draws less amps/current from the battery )
2. A battery is a CURRENT storage
device with fixed voltage , we use current capacity.
3. We want to conserve CURRENT not voltage
4. THey are MORE efficient than a BOOSTED regulator and draw LESS current to do the SAME JOB.
5. Stacked cells allows you to reduce the voltage and conserve current capacity of a battery.
Boosted devices eat
batteries and require higher capacity batts with higher current draws ( hence the AW type batt. on a ProV and others )
We did a LOT of research in this area and came up with what I believe is the MOST efficient regulated
device possible. I am seeing 96% efficiency in tests .