VVPV- muted flavor? No idea what's going on.

[Bovinia]

Sed, a temporary quick fix might be to take something like a sewing needle and see if you can wallow out the air holes in your atty to improve airflow. I've done it to a few cartos in the past

 

[Sedateme]

I tried boring the air holes out with a small drill bit... didn't help much. I've got to have the atty just catching the threads to get airflow. It's pretty wobbly but it works for now.

 

[uzzaperez]

The thing is the mod doesn't have anything to do with the flavor Sedateme, unless it's not putting out the same voltage, did you meter the VVPV with your meter ? it's the ONLY thing it could be accept if you not getting juice to the Atty, have you checked the feed system to make sure your hose isnt inked in some way and its not feeding properly ? Only two things it could be = Voltage or feed ! double check these two things as well as your connector, take off the shield, any adapter and twist the Atty on dirrectly to double check it's not an adapter shorting as well. Must be one of these 3 things !

You're right...but here's the reason I really love your post:

...it's the ONLY thing it could be...

...check these two things...

...Must be one of these 3 things !

I'm laughing WITH you! Great post turned out even better as your thought process went on...

 

[5cardstud]

I tried boring the air holes out with a small drill bit... didn't help much. I've got to have the atty just catching the threads to get airflow. It's pretty wobbly but it works for now.

I think I would change the screw.

 

[Emris]

I think I would change the screw.

If it is any thing like mine changing the screw will do little to nothing. There is not enough space between the threads to allow any air to pass through. I am going to look into getting a bottom tap and chase the threads a bit in order to remedy this.

 

[markfm]

Glad I started using adapters a year ago, left this stuff behind.

 

[5cardstud]

If it is any thing like mine changing the screw will do little to nothing. There is not enough space between the threads to allow any air to pass through. I am going to look into getting a bottom tap and chase the threads a bit in order to remedy this.

Well it helped mine greatly. The slotted screw lets the air vent better.

 

[Emris]

Well it helped mine greatly. The slotted screw lets the air vent better.

I already tried it in mine, my threads are TIGHT. I have to fight with the atty to get the threads started.

 

[BuzzKill]

I already tried it in mine, my threads are TIGHT. I have to fight with the atty to get the threads started.

Email me I will send out a loose tapped top cap so you can try it ok ?

 

[Emris]

Email me I will send out a loose tapped top cap so you can try it ok ?

Thanks Mike. I will send you an email in the morning.

 

[Sedateme]

The new top cap fixed my flavor issue. Thank you very much Mike! Awesome customer service, awesome mod, awesome vape from it... I'm a very happy customer!

Seriously, when I say "awesome customer service" I mean it. We had a few issues with this unit and Mike has been great every step of the way. Thanks again.

 

[Bovinia]

That's great Sed!! I'm glad you're finally in vaping heaven

 

[5cardstud]

The new top cap fixed my flavor issue. Thank you very much Mike! Awesome customer service, awesome mod, awesome vape from it... I'm a very happy customer!

Seriously, when I say "awesome customer service" I mean it. We had a few issues with this unit and Mike has been great every step of the way. Thanks again.

I been checking from time to time to see how it turned out and I'm happy everything turned out good for you.

 

[BuzzKill]

The new top cap fixed my flavor issue. Thank you very much Mike! Awesome customer service, awesome mod, awesome vape from it... I'm a very happy customer!

Seriously, when I say "awesome customer service" I mean it. We had a few issues with this unit and Mike has been great every step of the way. Thanks again.

Good to hear Sed. !!! glad it worked out , now WE know to make these looser

 

[Bovinia]

Every little issue that is discovered makes the next batch of PVs better

 

[mwa102464]

The Flavor master ULTIMATE VVPV =

Lovin this Savage Beast

 

[908Tracy]

Very nice looking VVPV mwa!!!! Awesome!

 

[Darkstarncw]

That thing looks crazy!

 

[Emris]

Email me I will send out a loose tapped top cap so you can try it ok ?

Sent you a email on the 24th, never heard anything back.