WANTS and NEEDS requests...

[pm2006]

I have the regular 510 atty's that came with my kit. I put in an order for 510 cartos from madvapes.com. I'm getting the Chuck from Elana, another forum member. She's awesome BTW. I'm gonna try the cartos and see how they work. Now to figure out how to fill them. Anyone know of any good videos to watch to learn how to fill up cartos?

http://www.google.com/search?q=ecig...esult_group&ct=title&resnum=4&ved=0CDEQqwQwAw

Lots of condom fill carto vids here

 

[Drozd]

OK, how about the Chuck is the best of all the PV's I've used



I'll have to take your word on this one unless your willing to loan me yours to try out. I don't care if the thing comforts me at night and talks dirty to me, there's no way in creation I'd ever pay that much for an ecig LOL

lol....$160 isnt that bad...when it's going to last forever...well that and it's ordered for you as a upcoming birthday gift...

and loan it to you...lol...it's one of those pry it from my cold dead hands kinda things...now maybe if we're ever in the same place at the same time I'll let ya touch it....or even try the super6...which is almost equally as awesome...

 

[Blaze]

lol....$160 isnt that bad...when it's going to last forever...well that and it's ordered for you as a upcoming birthday gift...

and loan it to you...lol...it's one of those pry it from my cold dead hands kinda things...now maybe if we're ever in the same place at the same time I'll let ya touch it....or even try the super6...which is almost equally as awesome...

I'd be down for the gift thing. I say I'd never PAY that much for one....now excepting one as a gift is an entirely different matter LOL

I had at one point considered the Super 6, but apparently he stopped making them. Maybe from the classifieds someday

 

[Pharaoh]

lol....$160 isnt that bad...when it's going to last forever...well that and it's ordered for you as a upcoming birthday gift...

and loan it to you...lol...it's one of those pry it from my cold dead hands kinda things...now maybe if we're ever in the same place at the same time I'll let ya touch it....or even try the super6...which is almost equally as awesome...

Get's in line to touch it

 

[AvalonMyst]

Unless I'm missing something, the Chuck is only $80 shipped. What costs $160? That's way to much to spend.

 

[Drozd]

I'd be down for the gift thing. I say I'd never PAY that much for one....now excepting one as a gift is an entirely different matter LOL

I had at one point considered the Super 6, but apparently he stopped making them. Maybe from the classifieds someday

lol...they go quick in the classifieds...they don't go up all that offen and sell in a very short time...

he's redesigning them and bringing them back out eventually..

maybe when I get the precise I'll let ya try the S6....with a high drain 14500 and a LR 306 and a drip tip..it's vapegasmic

Unless I'm missing something, the Chuck is only $80 shipped. What costs $160? That's way to much to spend.

the precise 18650 does...all mechanical, all stainless, lifetime warranty...best darn mod on the market...IMHO

I don't think that's too much to spend...where there's a lifetime warranty and being that it's all mechanical there's nothing that can really go wrong with it...and heck you can even wash the parts if you got them dirty (like dropped it in mud or something)...
so for something that's going to outlast you...that aint so bad... meanwhile I know people who've broke chucks multiple times in under 3 months...

plus the entire line is just sleek and sexy..

 

[wphsmike]

lol...they go quick in the classifieds...they don't go up all that offen and sell in a very short time...

he's redesigning them and bringing them back out eventually..

maybe when I get the precise I'll let ya try the S6....with a high drain 14500 and a LR 306 and a drip tip..it's vapegasmic



the precise 18650 does...all mechanical, all stainless, lifetime warranty...best darn mod on the market...IMHO

I don't think that's too much to spend...where there's a lifetime warranty and being that it's all mechanical there's nothing that can really go wrong with it...and heck you can even wash the parts if you got them dirty (like dropped it in mud or something)...
so for something that's going to outlast you...that aint so bad... meanwhile I know people who've broke chucks multiple times in under 3 months...

plus the entire line is just sleek and sexy..

GLV2 looks pretty decent. I checked their website, looks like they're still making the 18650s

 

[AvalonMyst]

anywhere i can see a picture of the precise 18650?

 

[Lilacs212too]

not sure if it's a good deal or not, but no one has commented on it that a PM was sent... *shrug* since you boys are in the mood...

http://www.e-cigarette-forum.com/forum/classifieds-swaps/112586-fs-5v-glv-little-orange-chuck.html

 

[wphsmike]

anywhere i can see a picture of the precise 18650?

Super T Manufacturing, Innovative manufacturer of electronic cigarette products.

 

[VpnDrgn]

ecig condom fill - Google Search

Lots of condom fill carto vids here

IMHO - I've always thought the condom fill method very messy, at least I've never had any luck with it. Especially with 510 cartos. ( because of the threads sticking out instead of inverted like on a kr8 carto, which is what you see in most of the videos I have seen ) Madvapes 510 cartos have the soft plug if I remember correctly and they are easy to pop out with a straight pin, just be careful not to stick the pin to deep or you'll snag the filler inside. Leaving the condom on the batty end you tilt the carto at 45 degrees and drip appx 10 drips down the inside wall onto the filler, you'll see the filler absorb the drops as they make contact. ( thicker juices will go a little slower ) Rotate the carto 180 degrees and drip another 10 drops down side of wall onto filler. Then do what is called the "thermometer" flick ( holding the mouth end flick the carto downward like you would a thermometer, this is why you leave the condom on the batty end ) to force the juice down into the batty end of filler. The filler should look much dryer now. Add a few more drops on each side as in first step. You should be able to tell when the filler is soaked, it will not absorb juice as quickly and will stay wet looking. Now put the plug back in and take the condom off the batty end and blow gently through the carto from the mouth end to clear any juice that may have gotten into the center part. I prefer to let the carto set for 30 minutes or more before using but everyone's preferences vary. I would definitely let it set on the first fill but after that you should be good to go as long as you don't really dry out the carto before re-fill.

 

[Drozd]

anywhere i can see a picture of the precise 18650?

Super T Manufacturing, Innovative manufacturer of electronic cigarette products.

what he said....

or: either the far left or the far right

 

[wphsmike]

what he said....

or: either the far left or the far right

So, virtually indestructible, but how is it better than the GLV2 or the Chuck? Oh, and lifetime warranty?

 

[Drozd]

So, virtually indestructible, but how is it better than the GLV2 or the Chuck? Oh, and lifetime warranty?

yeah lifetime warranty...and me my preference is for all mechanical devices...there no wires, no buttons to short or wear out...no insulator to wear out, no epoxy or regulator to break...you could literally put it in your sink and wash and clean it..dry it off with a towel and vape..there just isnt anything to break on it...stuff made of brass or aluminum..the metal is soft...eventually there's a chance you're going to strip threads...

but remember I work heavy construction...I have one of his other mods...I've dropped it accidentally from just over 3 stories up (bounced off an I beam and into a shallow puddle) and ran it over with the lift to get down to get it...and I just had to wipe it down and it was back working again...

 

[Blaze]

lol...they go quick in the classifieds...they don't go up all that offen and sell in a very short time...

he's redesigning them and bringing them back out eventually..

maybe when I get the precise I'll let ya try the S6....with a high drain 14500 and a LR 306 and a drip tip..it's vapegasmic

the precise 18650 does...all mechanical, all stainless, lifetime warranty...best darn mod on the market...IMHO

I don't think that's too much to spend...where there's a lifetime warranty and being that it's all mechanical there's nothing that can really go wrong with it...and heck you can even wash the parts if you got them dirty (like dropped it in mud or something)...
so for something that's going to outlast you...that aint so bad... meanwhile I know people who've broke chucks multiple times in under 3 months...

plus the entire line is just sleek and sexy..

I'll give you the sleek and smexy part *drools*

I'd prolly be singing a different tune if I had that kind of cash LOL

I've been thinking about the IMR's for a while now for my Chuck. Some say they can't tell a difference vape wise, some say there's a huge difference. But just looking at the specs of the batt vs. demand of an atty, they seem like the safer batt to be using

 

[wphsmike]

yeah lifetime warranty...and me my preference is for all mechanical devices...there no wires, no buttons to short or wear out...no insulator to wear out, no epoxy or regulator to break...you could literally put it in your sink and wash and clean it..dry it off with a towel and vape..there just isnt anything to break on it...stuff made of brass or aluminum..the metal is soft...eventually there's a chance you're going to strip threads...

but remember I work heavy construction...I have one of his other mods...I've dropped it accidentally from just over 3 stories up (bounced off an I beam and into a shallow puddle) and ran it over with the lift to get down to get it...and I just had to wipe it down and it was back working again...

Seems worth it to me! It is available for order on his website, correct? Or is that "pre-order"? Might be worth looking into in September!

Other than mechanically, does it out perform the others?

 

[Blaze]

yeah lifetime warranty...and me my preference is for all mechanical devices...there no wires, no buttons to short or wear out...no insulator to wear out, no epoxy or regulator to break...you could literally put it in your sink and wash and clean it..dry it off with a towel and vape..there just isnt anything to break on it...stuff made of brass or aluminum..the metal is soft...eventually there's a chance you're going to strip threads...

but remember I work heavy construction...I have one of his other mods...I've dropped it accidentally from just over 3 stories up (bounced off an I beam and into a shallow puddle) and ran it over with the lift to get down to get it...and I just had to wipe it down and it was back working again...

Damn, now THAT'S a positive testimony

 

[smilin0117]

does anyone know what the last want or need was?

 

[Blaze]

I'm getting a Chuck in the next couple of days. I'd love to try out a 901 and see what all the fuss is about. If you have a spare one you don't use I'd love to try it. Also, I'm gonna need a 510 to 901 adapter, right?

So....I've never made my own juice. I've been reading alot posts on PIF'ers DIY'ing their own juices and about this mystical BBB juice that everyone seems to love...lol. Well I decided to try to make my own juices! Saturday night I ordered some 60mg flavorless(should be coming this week) and ran out looking for loranns flavorings but couldnt find any. I found and bought McCormicks but I mixed some 0 nic and I think its not flavorfull enough.I think I'm using the wrong stuff.

Ok...heres the "want" PIF'ers...If any DIY'ers out there can send me any PA or flavor art flavorings I would much appreciate it. Just some small samples...any flavors would be nice. just to get started and see if im any good at it before I go spending more money on DIY.

Thanks
Mondo

*WANT*

Still want a sample of Halo menthol ice 18 or 24mg I have truepure and coolmist to exchange
RIMP

*WANT*

a 901 to 510 adapter. cant pay the $6 shipping for a $2 part. I got some juices to trade too, just PM me.

Here's the last few. We did get a bit off topic didn't we?

Sorwwy *runs and hides*

 

[Drozd]

does anyone know what the last want or need was?

lol...sorry did you have one?....
I'm a couple of miles from you...so if I have it and can spare it...let me know