Was given a mechanical mod.

[thx997303]

So, I've been vaping for a month now. I use three iclear 16s with two Ego T batteries. It's been working well for me.

The other day, I was in a local vape shop, when I was talking to a guy about mods. He pulls out a mechanical mod and an 18650 battery and says here, have these.

So I now have a mechanical mod, and want to set it up. Was thinking that I would build an rda, but don't know where to start.

I plan on replacing the battery, since it's an unknown quantity, and I know I'll need a charger as well.

So, what RDAs would be less expensive and easy to learn all of this on?

 

[RandyF]

What is it, not all mechs are created equal. Most important question, is it a hybrid (no top cap).

edit, the "facepalm" wasn't directed at you, it was directed at the guy who gives a mech and battery to a guy currently using an eGo battery and a clearo.

 

[jamal01]

the fact that he just gave it to you with no info I think is a bit dangerous

good thing you came here before you started building away! What mech mod is it?

With regards to an RDA it all depends what your going for.

I love my Lancia for flavour and vapor
My dark horse and mutation are my cloud chasers

The Lancia and dark horse are easy to build on due to the large post holes

I also really like my magma but the airflow is a bit limited

Now choosing your battery is the most important part. If you don;t have one already you will want to get a multimeter. You will need to ensure that your build does not exceed the current that your battery can handle. There's plenty of threads for more info on this, just look for the battery safety stuff!

Vape Safe!

 

[Susan~S]

Hello and welcome to the forum thx997303. Glad to have you here!

Here is where you start.

If you are new to mech mods and rebuildables I highly recommend you spend some time with Baditude (one of our resident battery experts) and visit his blogs. You are now 100% in control of your own safety (and others around you). Make sure you purchase an ohm reader and a voltmeter or DMM so you can measure your builds, check for shorts and measure the remaining charge on your batteries.

Baditudes Blogs. The blogs regarding mods and rebuildables are listed below:

BATTERIES

9. Battery Basics for Mods: IMR or Protected ICR?
* Another essential read to understand which batteries are safe to use in mechanical and regulated mods. Includes a frequently updated list of recommended safe-chemistry, high-drain batteries with their specifications.

17. Purple Efest Batteries Not As Advertised
* A cautionary blog that reveals that the purple Efest batteries may not have the specifications advertised. Also includes a commentary on "continuous discharge ratings" vs "pulse discharge ratings" of battery specs.

OHM'S LAW

14. Ohm's Law for Dummies (Vapers)
* My attempt at explaining Ohm's Law in layman terms and how it relates to vaping.

16. Explain it to the Dumb Noob: Ohm's Law Calculations
* As simple as it is to use, some people have a tough time grasping the concept. Warning: Includes graphic photos of mod explosions.

MECHANICAL MODS & REBUILDABLES

7. Information Resources for Your First RBA
* An essential read and reference guide for someone new to rebuilding coils. Includes a multitude of useful links on battery safety, mod safety, coil meters, coil building, and the differences in the three types of RBA's.

15. Inexpensive Mechanical Mod and RDA Setup
* A response to the frequently asked question on how to get into rebuildable atomizers with a mechanical mod inexpensively. Includes a list of commonly used tools and supplies for rebuilding and where to find them.

BATTERIES - WHERE TO BUY

Only buy batteries from a reputable supplier (not ebay or Amazon) as there are many counterfeit batteries being sold. Here are several reputable battery suppliers in the US.

* RTD Vapor
* Illumination Supply
* Lighthound
* Orbtronics

 

[thx997303]

I don't know what it is. Here are some pictures.

And RandyF, come on, it was a nice gesture. We all take our own safety in our hands. I know a thing or two about batteries and their possible dangers, having played with RC helis and those fire hazards they call lithium polymer batteries.

jamal01, dangerous? Maybe. Still a nice gesture, and I was in a vape shop where they build mods. Context matters. Otherwise, there was more to the conversation, just gave the basics.

I'm not really chasing clouds, just like flavor and a good vape. I can already tell the clearos aren't the top end. But they have been working, since I haven't smoked a cigarette in two weeks. I'll look into the lancia if it will work with my mod.

Susan S, thanks for the information. I'll spend a good amount of time reading it. I'm familiar with Ohm's law, but a refresher can never hurt.

I'm not sure who asked, but I have a couple of multimeters I use for automotive work. Should work just fine here.

 

[RandyF]

More than a bit dangerous, you just went from the race track at Disneyland to the Indy circuit. Mechs pose the most danger in vaping if you are not clear with everything it entails. Number 1 being battery safety. There is so much you need to know before you just throw a coil in an atty and battery in the tube an vape, more than can be explained easily. First and foremost, know what Ohm's law is and why it is important in this application. Once you know and COMPLETELY understand that, you can start fiddling with builds. It really is that important.

 

[thx997303]

I get it. I'm the type to research things intensely before doing anything. Thanks for the concern, but here I am asking questions, so it's not an issue in this case. Any idea on what mod it is? I've looked and can't seem to identify it.

 

[RandyF]

Does the top screw off, or does it have a hole straight into the battery? Is there a way to lock the fire button?

 

[thx997303]

The top does screw off, and there is a ring that locks out the button on the bottom.

 

[Mrs C]

OP you are off to a good start by coming and asking where to begin . To many jump in without learning the basic safety knowledge. Susan gave you some very good information and links to start with. Once you understand that info then it will be time to gather your tools and pick an RDA.

Please don't take anyone's advice as getting on you. We like to see new folks learn to use advanced gear safely.

 

[Burn_notice_fan_NY]

Congratulations on your first mechanical mod. I think that I speak for us all when I say that I am happy that you are taking the time to research the mod and battery safety prior to use. Unfortunately, I'm unable to help you identify the mod but I wish you best of luck in your journey into the world of mechanical mods.

 

[RandyF]

Well at least it isn't a hybrid, so you won't have to worry about the 510 pins on the atty you choose. Hopefully one of the Mods will move this thread to the mech section once you get over the 5 posts. Safe bet someone there will be able to identify it.

 

[thx997303]

The hybrids are the ones with the specific atty right? I'm over 5 posts now, maybe I should start a thread over there.

And thanks for the welcome all!

 

[Dan GSR]

Any rda with a protruding pin will fit

 

[Arnold Ziffle]

you could always throw a nautilus on for the time being and have a pretty good vape.

 

[thx997303]

Could, but I already have the other clearos and they're working well. I'd rather not spend any money not toward an RDA.

I've been reading Baditude's blog posts, and a few other pieces of information about batery use, and I've noticed that there's some level of safety margin regarding maximum discharge on batteries. One piece of information suggests keeping the resistance to .25 or above for a battery with a 24 amp discharge rating. Using ohm's law, 4.2 v and .25 ohms this give a discharge of 16.8 amps, which is approximately 70% of the rated discharge for the battery. On another example, they give a battery with 10 amps discharge, and a "safe" resistance of .5 ohms. Using 4.2 v again, and .5 ohms, this gives a discharge of 8.4 amps, which is 84% of the battery's rated discharge.

So, my question here, is there a generally accepted "do not exceed" percentage? Such as, do not exceed 70% of a battery's maximum discharge rating for example? Does this change with different maximum discharge rating?

 

[PLANofMAN]

I get it. I'm the type to research things intensely before doing anything. Thanks for the concern, but here I am asking questions, so it's not an issue in this case. Any idea on what mod it is? I've looked and can't seem to identify it.

Man, that's bugging me. I've seen that mod (or at least a clone of it) on FastTech. It almost looks like a Cronus, but it's not.

 

[Johnny Hughes]

Your best bet being new to it is to get a sub tank like the Atlantis or the kanger(which has an rba option that you could fiddle with) but it'll give you a great vape experience that u want from a mod starting off without as much instant coil building learning on your part and you can ease into it

 

[Johnny Hughes]

And they would Chuck some vapor especially for a newbie to advanced vaping

 

[Frenchfry1942]

I would hold off on doing anything with it. There is a good bit to read and to fully understand. Mechs can be dangerous, it blowing up in your face can be hazardous. Just study and ask questions. Finding a friend that has one would prolly help. But, I would learn first.