What did you do to your PV today?

[Thorbear]

I came to realize that my "perfect vape" has changed yet again...
After an initial period of stardusts and vivi novas I fell in love with the genesis atomizers, and have been using them almost exclusively for a few months now.
Until i got a kayfun (and got it to work properly)
Filled it up this morning through its fill valve, performed stellar all day - no leaking no dry hits, awesome flavor.

Oh yes,

Wifey is not so pleased with me using hand towels and tea towels in the juice lab so I bought some microfibre cleaning cloths while I was doing the shopping. At $1 a pack and washable, these things are just about perfect as you can wipe up a juice spill, dry components, remove fingerprints, or clean up a clearo, and the juice or water just disappears! Everyone should have some.

Preparing for a heist?

 

[D4rk50ul]

I built a multi coil setup that over taxed a MNKE 18650 and melted a button. Luckily I was prepared for such a thing and caught it in time before battery failure.

Be aware of how things work and how to handle problems if you plan to push the boundaries of your devices.

 

[Big Screen D]

Just another fiddle free Pro Tank day.

 

[Neunerball]

After a long time of using SS wicks in my AGA-Ts, I set one up a couple days ago with silica (x2 2.5mm + x1 1mm). After a couple of days (and having to adopt the genny tilt for the first time), I can honestly say it doesn't suck.

Thanks for the video... Little bit to short though
I got a glimpse on a thread about wicks (the material they're maid out of). Sounded like certain wicks aren't that healthy. Can you elaborate on that?

Popped in a fresh battery and filled with Mango/Cinnamon Red-Hots. It's like Red Robin (Yummmmm.)

You're really having too much fun vaping... The flavor sounds interesting though... I think a Mango/Peach and a touch of Vanilla might be good... Talking about DIY and flavor. Does anyone know of a mix that would taste like a Bordeaux? I just thought of a mix that would be nice for Christmas... I know it's a little bit to early for that. However, developing the right mix might take a while.

I came to realize that my "perfect vape" has changed yet again...

I have a philosophy:"Nothing is as constant as changes"

Well now, I got a new clearo (eGo bottom coil), gave it a try. In addition, I also got two samples I ordered. Tried both in a carto, 'cause I don't want to spoil the other clearos yet. Both samples need to steep though. I think it's unfair, that you have to wait to enjoy a different flavor.

However, I'm enjoying to vape different flavors. It's like being in a Turkish tea house. A sip of chai and a drag of the water pipe, just chilling out.

BTW, five days without a analogs meanwhile!

 

[veypBOL]

Loving the ZAP but I am not liking how easy the top cap comes off. Decided to wrap some sewing nylon string where the O-ring sits to make it a little snug. I'm sure over time it'll get wet but It'll do for now.

 

[Neunerball]

After having filled my CE5, I cleaned it by rinsing it under warm water. Dried using paper towel where possible, blown through tube to blow out water. Special attention to drying the wicks, not to damage or pulling them out, however getting them as dry as possible. Filled with a different flavor. Yum, yum!

Since I started vaping 1 week ago, I'm still in search for my favorite liquid. So far I have tasted three and one of them has a nice flavor. However, I think there's a better flavor similar to it out there. I have some other liquids in stock that need to steep, looking forward to try them.

That's one thing, that bothers me! Having to wait, until you can finally use a liquid with it' true flavors. I'd rather have a liquid, that I can use right away.

 

[Neunerball]

I think I've narrowed down my juices. Got my A7 Mini rebuilable atty today. Of course, I had to check it out. I used one of my favorite juices, to have a comparison. After burning it in, it was a real good vipe, much more vapor and flavor, after finding the right voltage to use. Therefore, I had to order a Vision Eternity Rebuilable Atty.

Give me a break, I'm still in the process to find the equipment I like, besides at least one more fave liquid.

 

[upsetter21]

If you like Black Licorice at all, I suggest you try VooDoo Kitty from Timeless Vapor. I've never had Pluid, but people are comparing it to that which is so popular you can't find it - even people are asking for anyone's spares on the forums. So I like VooDoo Kitty a lot - it's grape, then liccorice, with a slight iciness. Really smooth & the first non-tobacco flavor that's roped me in for consecutive days. I usually can only tolerate food flavor e-liquid for a day at a time before I want to switch.

A few advices on the Vision Eternity: It's a good price. It is pretty w/ good plating. It vapes excellent - no spit backs - long funnel delivers nice steam. BUT it's fragile.

Some people (myself included) have shorted the positive post. When attaching a coil, it is necessary to apply force to the post. Over time (short time) the post cracks it's glue and falls down into the overall assembly. Metal hits metal and it's all bad. I even tried pulling my post back up - the insulation was still in tact - so I placed a blob of epoxy on the post. It held for about two weeks but the solvent nature of the juice, and the heating and cooling, eventually broke that joint too. Maybe better epoxy would have held. I suggest you support yours with epoxy before it gets pushed in. I was a little concerned about chemicals in the epoxy - but there has to be a food safe grade out there.

Also, NEVER overfill the ET - you will think it's a leaky .......; as long as your wicks are the right length and you only fill the lower section that is the collection cup you should have no leaks. It holds roughly 20 drops which for me at 25mg nic is like four cigarettes.

 

[upsetter21]

OH and what did I do with my PV today?
MOD'd the switch. Polished a turd.

 

[yzer]

Changed the 18500 battery once. Haven't filled the carto tank yet. Pushed the fire button quite a few times.

 

[solace.discord]

testing ways to add color to the outside of my T3 tanks to be able to tell my juices apart!

nail polish works, easily scrapes off with my thumbnail, and doesn't seem to damage the tank one bit.

 

[lazymorulz]

Wrapped a 510 in a black flame decal oooo..

 

[meowmixmeow]

polished it, silly black chrome vamo, always getting finger prints.

 

[txhokie1]

Dropped a z-atty-pro... booom everything lived but the glass

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

 

[Colonel]

testing ways to add color to the outside of my T3 tanks to be able to tell my juices apart!

nail polish works, easily scrapes off with my thumbnail, and doesn't seem to damage the tank one bit.

Pinstripe tape from automotive store. Many colors and easy to wrap a little steipe around the base. I have mine all marked with colored strips for flavor.

 

[jotuck]

Added a silver plated spring to my roller and recoiled my zen. I'm loving the results.

 

[Neunerball]

Well, after a month of daily use, vaping my ADF (Apollo's French Vanilla), I had to retire one of my EVOD clearos, until I receive a replacement coil head.

 

[zapped]

Ummm I vaped it.