What do you think of this Squonking Atomizer

[vapero]

@vapero -----There seems to be a big interest in this squonking READY----model called The Velocity-------just wondered if you had this model or was interested

and what you thought about the Velocity.......

I don't get it really, there is a lot out hype regarding the velocity,I do have it, live the post design but other than that I get absolutely no flavor or of it, on the bright side or could help you empty those unvapable flavors

In summary:
Love
the deck
Hate
Size and flavor

I did fix it by butchering half the height of those post and using a rogue cap on it, I'll post some images tomorrow

Sent from my Nexus 5 using Tapatalk

 

[twgbonehead]

I have the 3d myself and have been using it ever since I got it; I hardly ever bother to press down on it; holds enough as it is and the reservoir is more used as a fill and drain; been toying with the notion of dropping wick down the hole.
Annoying to build on.
The main reason I keep using it is I have a nemesis and it mates truehybrid to it.
at $5 on fasttech it was a no brainer.

"Annoying to build on" is an understatement! I really wanted to like this one, but I just found it impossible to build on.
While you're trying to tighten the nuts, it keeps unscrewing from the other end.

Wish they'd come out with a V2, with a decent post arrangement!

 

[edyle]

"Annoying to build on" is an understatement! I really wanted to like this one, but I just found it impossible to build on.
While you're trying to tighten the nuts, it keeps unscrewing from the other end.

Wish they'd come out with a V2, with a decent post arrangement!

on the 3d
I've only done 1 coil on mine so far, but weeks later I figured out there's one way to put the coil so that everything lines up properly plus wrap around clockwise round the screw; this rda also doesn't have post holes; I think it came out long before post holes became popular; I hope somebody makes an improvement/upgrade on this design in 30mm.

 

[vapero]

If I hadn't already gone into full squonking I would definetly get this setup, using it with the ignition base,something like this
this is a photoshoped image, but you get the idea

 

[thetrucker]

Yes I see this would work with an extra tall atty---mite even make a smokless owl easier to digest........

 

[edyle]

If I hadn't already gone into full squonking I would definetly get this setup, using it with the ignition base,something like this
this is a photoshoped image, but you get the idea

View attachment 487846

Oh yes; that's nice; gives me a reason to reconsider that ignition base

 

[beckdg]

Plastic squonk bottle looks dangerously close to the heat source.

Tapatyped

 

[edyle]

on the 3d
I've only done 1 coil on mine so far, but weeks later I figured out there's one way to put the coil so that everything lines up properly plus wrap around clockwise round the screw; this rda also doesn't have post holes; I think it came out long before post holes became popular; I hope somebody makes an improvement/upgrade on this design in 30mm.

And here it is:

when wrapping coil, it makes a difference clockwise or anticlockwise to make the wires line up

the positive post is higher than the negative post, and when you wrap a coil with the two leads ending up pointing in the same direction, one is higher than the other

therefore you can line them all together
I mean... there is one way that it all lines up together

 

[Mad Scientist]

I have one of these in the cart at fastech. I'm debating whether to order and wait for in stock, or wait for in stock and then order lol.

 

[bluecat]

Agree. On bottom feeding mod your hand is already in right place to squonk

with this, you have to reach up to the atty to squeeze it? Makes no sense to me.

There WAS a squonking atomizer that already came out about 2 years ago, not rebuildable RDA type though since this was before rdas.

In a regular bottom feeder, stuff like the bottle would be easy to replace. If yuou get a split in this one you are showing, seems like it would be a real pain to replace?

Also, since it squonks, then you are limited to a non-glass / non metal juice receptacle, right?

Some reason that vision squonker never caught on. I almost pulled the trigger on one.

Found this

Vision Aurora BFT - bottom feeder kit for tube mods | E-Cigarette Forum

 

[bluecat]

on the 3d
I've only done 1 coil on mine so far, but weeks later I figured out there's one way to put the coil so that everything lines up properly plus wrap around clockwise round the screw; this rda also doesn't have post holes; I think it came out long before post holes became popular; I hope somebody makes an improvement/upgrade on this design in 30mm.

Did 2 coils on mine. vaped on it 3 puffs. It has been sitting in the to try again pile for a couple years. Pushing down on it was just wonky.

 

[edyle]

Did 2 coils on mine. vaped on it 3 puffs. It has been sitting in the to try again pile for a couple years. Pushing down on it was just wonky.

Yes, I've found the press down thing to be of very limited use.
There's only (I think) enough room in there for 1 usefull pressdown anyway.
I hardly do it; I mostly use it like a normal rda, but it does have a big cup, plus the way I position the hole (and i leave out the drain screw) some liquid can come out from below when I take a toot;

But what I have a mind to do next time I recoil is to turn the cup over.
That would mean no more squish.
It would mean pressing down will close the airholes off and prevent leaking if I lay it down; I'd have to pull up when I want to vape.

 

[bluecat]

Yes, I've found the press down thing to be of very limited use.
There's only (I think) enough room in there for 1 usefull pressdown anyway.
I hardly do it; I mostly use it like a normal rda, but it does have a big cup, plus the way I position the hole (and i leave out the drain screw) some liquid can come out from below when I take a toot;

But what I have a mind to do next time I recoil is to turn the cup over.
That would mean no more squish.
It would mean pressing down will close the airholes off and prevent leaking if I lay it down; I'd have to pull up when I want to vape.

I tried using as a RDA. Just too big for that. I lost the drain plug to mine. It was down the sink after the first clean. I really really wanted to like it since it was a hybrid. I even bought a 510 connector for it. That was just a bad purchase on my part. It is in the to try again pile... so I haven't given up.