What is the best build you have used over 1 ohm?

Status
Not open for further replies.
Hi everyone!

I am a fairly experienced vaper. I rebuild on several devices kayfun, TOBH, Patriot, Etc. The mods I am using are a Zen Mechanical and a ZNA as well as a 26650 Panzer. After talking with some experienced vapers I am going to try to steer away from sub ohming on my drippers, but I want to still get big flavorful clouds on a higher ohm build to reduce the heat in my vape. What build and what type of coils have you used that would work to achieve my goals. I am using 32ga or 28ga kanthal with 8-12 wraps. Getting decent vapor and flavor, but I want more! I have experimented with parallel and braided coils, but I am not yet a pro. What do your pros recommend?
 

steved5600

Ultra Member
ECF Veteran
Verified Member
Sep 7, 2012
2,693
1,197
Dallas, Texas
You did not mention what the Inside Diameter of your coils were. I get good builds with dual coils with an I.D. of 2.5mm 28ga 9 to 9/8 wraps now that will be a total ohm below 1 ohm of .8 ohms. But the ohms per coil will be 1.6 ohm. At 4.2 volts that will be 22 watts total 11 watts per coil. I use cotton, cellucotton or cotton bacon. On RDAs I put just enough wick to slip though the hole in the wick that i get a slight resistance. I take and tuck the wick ends under the coils. I don't get a big cloud but it's not bad and i still get good flavor. Also it will hold up a pretty good vape until the batt reaches 3.3-3.5 volts. On a kayfun type i put enough wick in the trays to fill except for the juice holes and i do NOT pack it in. Lose is best for cotton type wicks.
 

bm2112

Super Member
ECF Veteran
Verified Member
Jul 5, 2014
317
191
I know you said you were trying to steer away from sub-ohming because of the heat, but an easy way to keep the performance while reducing heat is airflow.

My favorite all-around, daily build is a simple dual 28 gauge micro coil. I wrap my coils with a 1.5 mm diameter and use 5-6 wraps. This build comes out to around .6 ohms and its a great performer. I have 2, 3 mm airholes in my RDA and the vapor is so cool I can barely tell I'm inhaling any.
 
Status
Not open for further replies.

Users who are viewing this thread