What is your setup?

[DarthIxidor]

I know I have looked at tons and tons of different setups and with vaping like anything else you learn something new everyday. So I would like to know, if some of you Vets would be so kind as to inform me on what you use to vape. I'm by no means a vet, exp, or anything of the like. This is what I use and what I have ordered.

RN4081 Ordered:
4 Batteries Vtube Kit from Apollo
3 Attys 1 Batteries 18650
1 USB Passthrough 2 Mini-sub 3.0 Tank
24mg Menthol Eliq 5 Prepunched 3.0 Boge Cartomizers
Method of vaping
Dripping

Ordered:
Vtube Kit from Apollo
1 Batteries 18650
2 Mini-sub 3.0 Boge Tanks
5 Cartomizers Prepunched 3.0 Boge Cartomizers
36mg Menthol eliq
Method of vaping:
Tanks and Dripping

 

[BiffRocko]

My setup is in my signature, but it's really irrelevant because it's setup to suit my preferences. (a hot, thick vapor and I only vape one flavor.)

What I can say though is that you've got a nice platform for experimenting and finding your preferences. VV will allow you to experiment with different wattages to find the sweet spot for your favorite flavors. The 18650 should give a nice long battery life.

Also, now that you're into VV territory, this thread I wrote a while back may help during your experimentation with different voltages and resistances.

http://www.e-cigarette-forum.com/fo...e-wanted-know-plus-bit-electronic-theory.html

 

[Kent C]

I have several eGo-c's - one for each flavor Decadent Vapours in VG.

Reo-mini bottom feeding mod - with a cisco 306 LR atty or vapage 'universal' gold hybrid atty made for bottom feeders.

VV eGo Passthrough set at 'high' with a cisco 306 LR 1.5Ω atty - drip only - coffee vape.

 

[rolandpibb]

I have different PV's for different vibes.

My Reo mini (with a smoktech 1.7 carto) for out and about, and a ProVari with 6.5ml carto tank (with a flanged smoktech 1.7 carto) for on the couch.

 

[DarbukaDave]

I have a few, but today's set up is my newest ( and quite possibly my favorite)

Phidias (beautiful wood box mod)
Kicked 18650 at 10 watts
1.8 ohm io6 atty from Ikenvape
Burning through some Strapple from RAWR vapor

I'm really digging this!

 

[otrpu]

After nearly a couple years I've landed on using ProVari w/VISION Storm Tank. I vape constantly, usually the same eLiquid. Means a top cup coil will tend to heat things up a bit. Therefore, I use the longest SS DT I can find. SS takes longer for heat to migrate. I don't consider myself to be anywhere near an "normal" vaper. I roll my own. Try it, you might like it. JMHO

Cheers,
otrpu

 

[Dj Xy]

Reo mini with 1.5 joye atty
Vmod with 2.2 silo
Icon with bulli a2@ 2.0 dripping
and thats just whats loaded up right now

 

[Animeguy]

Mods:
2 OkR-t box mod (one has a broken atty connector)
1 just finished paladin tone generator I just gutted and put okrt mod in
Atty:
4 x 3.0 Cisco Spec 510 atty (avid)
1 x Super T drip tip (Super T)
Juice:
Djarum Black Clove Concerntrate from american e liquid. Been vaping that for well over a year.
100mg VG nic and VG (MFS)
Distilled water Mix it all to make 22mg nic juice.
Backups:
2x 1000mah Inferno and a 650 mah Inferno PT. (volcano)

THen I have some mod parts to rebuild my mods and/or build new ones. (digikey and madvapes)

 

[MickeyRat]

For home and long car trips:

Buzz Pro
Standard resistance 901 atomizer
An empire mods drip shield
and a DOD on top

For out and about:

Reo mini
1.8 ohm Cisco atomizer
Avid vapor stealth adapter
Avid vapor drip shield
extra batteries
spare full juice bottle

I have a small case with two ego bats, spare juice, extra atomizers, etc that I usually have with me as well.