What should i try next?

[sandB]

Just wondering, what's the next progressive step to take? I am so far comfortable with the c4, stardust, vivi clearomizers, etc....because of the ease of use,cleaning,etc.

I have seen the rest of the setups that are alot more complicated, with mesh,etc....is there something in between, that's easier to start with? Something that an amateur like me could start without too high a learning curve.

 

[chris85e]

vivi nova, can use wick or mesh.
after u get use to mesh u can try those rebuild able. ex. aga-t/s did clone....

 

[ratchet44]

vivi nova, can use wick or mesh.
after u get use to mesh u can try those rebuild able. ex. aga-t/s did clone....

Yeah. Totally agree. Try out the vivi. Rebuilding, ease of use, it's all good. And once you're confident enough, try gen atty (cobra, ac9, fogatti, etc etc). Although you need a lot of patience with those.

 

[sandB]

For rebuilding, i'm guessing it's easier to attempt to do wick first before attempting to do mesh?

 

[chris85e]

to be honest. i think mesh is easier than wick.
from my own exp, when i do the wick, i tends to pull off the wick line when washing the tank.
but for mesh, i just need to unscrew the screw remove the Kanthal wire and mesh.

 

[sgvap22]

And when you are done with rebuilding, move on to DIY juice making. Nothing beats vaping on your own concoctions

 

[sandB]

to be honest. i think mesh is easier than wick.
from my own exp, when i do the wick, i tends to pull off the wick line when washing the tank.
but for mesh, i just need to unscrew the screw remove the Kanthal wire and mesh.

I'm not too handy, and from the vids i've seen, mesh requires some folding and heating which can be a little tricky. Needs some flame gun or something also, am i right?

 

[sandB]

And when you are done with rebuilding, move on to DIY juice making. Nothing beats vaping on your own concoctions

I've already figured out how to make my own juice, i guess that part i already managed to do, just not so good on the hardware technical side.

 

[shanks]

Hmmm, may i know is it true that wick taste better than mesh? I read on other threads that using cotton ball as wick will have better taste. I'm also like SandB on Vivi Nova, so far I have been changing the coil instead of rebuilding it. I didn't even know vivo nova can be rebuild ~.~

 

[madhero]

Hmmm, may i know is it true that wick taste better than mesh? I read on other threads that using cotton ball as wick will have better taste. I'm also like SandB on Vivi Nova, so far I have been changing the coil instead of rebuilding it. I didn't even know vivo nova can be rebuild ~.~

It's always good to try different styles and find your own comfortable vape. Some swear on mesh, others stick to silica wicks and the rest jumps on both. Always do at your own comfortable pace and availability. You might like mesh after u try it or u might think its too troublesome.
Some of us stick to mesh and slurp a silica once in awhile.
It's all in the personal experience and choice in the end.

I for one love the ease of using mesh (usually genesis) and the flavor it gives. Some juices tastes better on wicks so I'll swap when I use certain juices.

 

[shanks]

It's always good to try different styles and find your own comfortable vape. Some swear on mesh, others stick to silica wicks and the rest jumps on both. Always do at your own comfortable pace and availability. You might like mesh after u try it or u might think its too troublesome.
Some of us stick to mesh and slurp a silica once in awhile.
It's all in the personal experience and choice in the end.

I for one love the ease of using mesh (usually genesis) and the flavor it gives. Some juices tastes better on wicks so I'll swap when I use certain juices.

Ohhh ok think i will get a rebuildable soon. Is Aga-T/S good?

 

[ussr]

Ohhh ok think i will get a rebuildable soon. Is Aga-T/S good?

its good enough... there are many ways to improve it too.learn from there move to more exclusive rebuildables if you keen from there on.

 

[dwsp77]

what did I tell u bro? these feedback enuf for I to decide?

personally I feel that cartos/clearomizers, ie. disposables, win in their convenience.. just use, throw, den screw on a new one. hassle-free. but they give u close to zero control over the taste/TH/vapor production of e juice u vape.

silica/fibre n mesh r e two main(only?) types of rebuildables.. also named by some as ody-style n genesis-style. n both have their own swear-by-it pple.. both have its own very justifiable good n bad points.

commonly, alot of pple have said that fruits seem to taste better on ody-style n tobacco on gen-style..

u asked me, so I'll tell u - i still prefer mesh mainly cos I'm lazy (a mesh wick can last u for months!) n we have an in-house guru who comes out wif simple but practical ideas to mod n stop gen-atties from leaking when placed sideways/upside down.

 

[dwsp77]

oh, n I vape fruits n menthol almost exclusively n actually find that they taste better on my mesh.. some pple say it's yr 'chiew say'.. my work on e silica wick is really very nothing to sneeze at. :c

 

[ussr]

oh, n I vape fruits n menthol almost exclusively n actually find that they taste better on my mesh.. some pple say it's yr 'chiew say'.. my work on e silica wick is really very nothing to sneeze at. :c

wu ya bo? lol

 

[Angel_Eye]

what did I tell u bro? these feedback enuf for I to decide?

personally I feel that cartos/clearomizers, ie. disposables, win in their convenience.. just use, throw, den screw on a new one. hassle-free. but they give u close to zero control over the taste/TH/vapor production of e juice u vape.

silica/fibre n mesh r e two main(only?) types of rebuildables.. also named by some as ody-style n genesis-style. n both have their own swear-by-it pple.. both have its own very justifiable good n bad points.

commonly, alot of pple have said that fruits seem to taste better on ody-style n tobacco on gen-style..

u asked me, so I'll tell u - i still prefer mesh mainly cos I'm lazy (a mesh wick can last u for months!) n we have an in-house guru who comes out wif simple but practical ideas to mod n stop gen-atties from leaking when placed sideways/upside down.

Bro, can advice how to prevent leaking on aga-t if placed it flat on the table?

 

[LaVsy]

Bro, can advice how to prevent leaking on aga-t if placed it flat on the table?

unfortunately no.
all rebuildable will leak.

 

[ussr]

Bro, can advice how to prevent leaking on aga-t if placed it flat on the table?

it depends on juice viscosity, additional holes can be plugged up using a pressed tip mesh which allows air flow at the same time prevent massive leakage.

Till date on mesh there is no 100% leak proof. Mesh is meant to wick liquid for you. tilting it upside down will still cause leakage. its just a matter of how much liquid is leaking out.

make sense?

 

[sandB]

That's an interesting point. I also want to know, what else, that you place flat on the table won't leak? I know so far it can be done with the clearomizers, like vivo, c4, etc....what other attachments won't leak when placed lying down?

 

[sandB]

unfortunately no.
all rebuildable will leak.

Really? is there any way to prevent leakage in rebuildables at all? Hmm, that means must leave it standing all the time. The reason i say that is because well, it's easier to knock it over sometimes, and i usually leave mine lying flat on the table.