White Lightining Box Mod Proposal

[Zay_Haze]

I've been using a cana mod for a while and now that the sx350 chip is out and about I figured I'd pick up a plastic enclosure and try fitting in a sx350 chip instead of a dna30.

This plastic box already has dimensions cut for a sx350 chip but its plastic- Hana Sx350 Modz (With up/down switches) by Loupac on Shapeways

Fire button- 16mm Momentary Blue LED 2 8V 4 3V Push Button Switch Shallow Depth Dome Top Mod | eBay

I was going to use a sony vtc5 for the battery and the regular tactile button switches for the up and down.

The main thing I cant decide is getting the $20 hana modz enclosure from fast tech and find someone to mill the screen out more so the sx350 chip will fit or just get the one linked too above that's already cut for it?

Im also not sure if the fire button I picked out would fit the hole that's already there or if that would need to be milled out as well.

Any other suggestions are welcomed, as it would be my first DIY mod and id like to avoid screwing things up or even worse injuring myself with an unsafe build. Thanks!

 

[DrBeaker]

Looks like a good plan to me.
You can also take a look at the 12mm led switches on ebay.
The vtc5 imo is the best 18650 choice for the sx-350.
I would avoid using a battery holder just solder to the battery exp. if you plan on vaping at 50w or above.

 

[opuscroakus]

I would avoid using a battery holder just solder to the battery exp. if you plan on vaping at 50w or above.

This is incredibly irresponsible. You don't know this persons soldering skills and being that it is their first DIY mod it really isn't something they should be trying.

A good Keystone holder with good contacts and the proper gauge wire will work at over 50w easily.

 

[DrBeaker]

Irresponsible. .. really? Thats why im a Doctor because im irresponsible. (Sarcasm)and we have this sticky everyone should have read...http://www.e-cigarette-forum.com/fo...shop-safety-advice-posting-guidelines.htmlThe sx-350 can do 60w.Soldering is a skill anyone can acquire. I am sure the op will figure out his limits and overcome them or get help.Its my option that soldering directly to the battery is safer and will provide the best performance with the sx-350.And you dont have to call my comments irresponsible if you dont agree with them. You can just say you dont agree and why. We are all adults here just trying to help eachother get and stay off the stinkies.

This is incredibly irresponsible. You don't know this persons soldering skills and being that it is their first DIY mod it really isn't something they should be trying.A good Keystone holder with good contacts and the proper gauge wire will work at over 50w easily.