Why is the draw so tight on my Buzz Pro?

[BuzzKill]

My4, what 5CS said about adapters is a great point.

I would say the Draw on your BP is the norm for the average 510. If you really like the airier draw, a 510-510 adapter would make a world of difference. only downside is added height

Personally if it were me, Id go to a 808/901 cap on my BP with a 808->510 adapter. These work perfect for adjustable draw and let me go from annoyingly tight to wind tunnel Perfect adjustable draw for under 20 bucks. a 808/901 with a 510 adapter is the same height as the standard 510 cap

Good point Ruppy , maybe try the My4 ??? not trying to get you to spend $$ just saying .

 

[marviner]

Nope. I did it gently, though, 'cuz I didn't want to mess up the threads. It just draws a little stiffer. I've tried other cartos on it as well, same thing. Maybe I've just gotten used to a lighter draw...and, like I said, I got lazy along the way.

I just put a ressurector carto in my tank, just to try a different carto. And, of course, turned the voltage way down. It vapes the same way. It's a lighter draw on my boxmod and ego, stiffer on my riva and BP.

p.s. Wow, these ressurectors are great at around 3.7V!! Just got them, first one I tried. You tried 'em yet?

Some cartos have manufacturing flaws. For example I've had few SmokTech dual coil cartos which didn't have air holes (near the threads) at all. Have you checked that possibility?

 

[Modrod.]

My4, what 5CS said about adapters is a great point.

I would say the Draw on your BP is the norm for the average 510. If you really like the airier draw, a 510-510 adapter would make a world of difference. only downside is added height

Personally if it were me, Id go to a 808/901 cap on my BP with a 808->510 adapter. These work perfect for adjustable draw and let me go from annoyingly tight to wind tunnel Perfect adjustable draw for under 20 bucks. a 808/901 with a 510 adapter is the same height as the standard 510 cap

I've actually been considering this myself. Mainly to use a sealed adapter to prevent leaky carto's from soaking my Buzz...again.

 

[mrjaguar]

I've noticed the draw on the buzz is a bit tighter too, I was thinking of drilling a VERY small hole in the 510 cap to allow for more airflow. (also gives me a reason to go to the tool store!!!)

 

[Modrod.]

I like the tighter draw. It feels more natural to me (i.e analog like).

 

[my4jewels]

I got a 510-510 shorty extension in the mail for my BP today, or should I say yesterday. It works like a charm. So, now I can adjust my draw as well as my voltage depending on my mood. I couldn't be happier!

 

[BuzzKill]

i got a 510-510 shorty extension in the mail for my bp today, or should i say yesterday. It works like a charm. So, now i can adjust my draw as well as my voltage depending on my mood. I couldn't be happier!

cool !!!!!!!!!!!!!!!!

 

[Doneyd67]

i have some joye 510 atomizers and they draw thighter than my DSE 510 so i use my extensions on the Joyes and not on my DSE's no biggie.

 

[BuzzKill]

i have some joye 510 atomizers and they draw thighter than my DSE 510 so i use my extensions on the Joyes and not on my DSE's no biggie.

Ya there is SOOOO much variation it is crazy IMO !

 

[Bovinia]

Ya there is SOOOO much variation it is crazy IMO !

Yes there is! Even my Fusions vary some from one to another. I hated adapters at first too but now they are my friends

 

[BuzzKill]

Yes there is! Even my Fusions vary some from one to another. I hated adapters at first too but now they are my friends

True , so True !

we MFG our parts to the thread specifications , when stuff does not fit it is 99% of the time the carto/atty that has bad threads .