Why is that? I thought PG was thicker than VG or am i mistaken?
Last edited:
World Exclusive SmartVapes Dripping Atomizer Custom Built for Dripping
- Thread starter Shinypaladin
- Start date
- th_trl_thread_readers 0
- Status
correct!
And yes sir like levitas said VG is way thicker than PG, Higher PG is better for things like Cartomizers that need the thinner juice for wicking etc, consistency of juice is a whole other thread lol. Any Atomizer without wicking or cartridge has air holes, if the juice is thin enough that's where its going! you cannot change the laws of physics! heh. What I am working on though is a new system to get around this problem. Right now the Drip shield is the best option used by a lot of people who drip. it catches and recycles all leakage whatsoever. Many experience no leakage at all though with higher VG juice, and some of course get not a lot of leakage with a little VG in the Juice. Personally I use at least 50/50 Juice when I drip and seem to have not much trouble with any leakage. I also use a Drip Shield just in case a couple drops of juice do get through the air holes, besides the drip shields look cool. Another reason people like the drip shields is they can tighten the draw, providing more resistance to the air flow which some like.
Oh....grrr....you have me sold....now I gotta go dig up some moolah for one of dem fancy thingers....drip shield
If it is lookin cool and all that
If it is lookin cool and all that Thanks for the confirm! I guess another thread steered me wrong saying PG is thicker .... or i'm losing my mind
Anywho I believe the SV101 is around 50/50 and was one of the e-juices I tried in the atty. Leaking really isnt my issue ..... it's the burnt taste and disappearing e-juice.The Boge LR Cartos are in and up on the site, I was able to do a 5 pack for $7.05 until Friday, the normal price will be $7.42 for a 5 pack, hope that helps. I know its 6 cents more than what i said but oh well its close enough!
just got my dripping atties! of course i didnt wait for the drip shield thing,there was some minor leakage,nothing that cannot be dealt with, and the shield should be here 2morrow, ANYWAYS ..... HOLY 
these things hit like a train, deeeyammm! i like it, I LIKE IT A LOT!
i got the yellow swirl tip and the white and black swirl tip >.< dropped my mod and the white and black tip broke in half, shoved the bottom half of the tip all the way down in the atty, and guess what....ATTY IS FINE. (but i really really liked the white and black swirl
) oh well, i will just get another one when i place my next order....and there will be a next order for sure.
i do think there is a bit of a learning curve with these, but once they are broke in, and you learn to vape with caution, lol, your golden!
i'm still aHmazed! nice job man, these things pack a punch! i seriously don't think i can vape with these all day, but it will be fun trying!
oh and worth mentioning SUPER FAST SHIP! A+++++++ for you!
these things hit like a train, deeeyammm! i like it, I LIKE IT A LOT! i got the yellow swirl tip and the white and black swirl tip >.< dropped my mod and the white and black tip broke in half, shoved the bottom half of the tip all the way down in the atty, and guess what....ATTY IS FINE. (but i really really liked the white and black swirl
) oh well, i will just get another one when i place my next order....and there will be a next order for sure. i do think there is a bit of a learning curve with these, but once they are broke in, and you learn to vape with caution, lol, your golden!
i'm still aHmazed! nice job man, these things pack a punch! i seriously don't think i can vape with these all day, but it will be fun trying!oh and worth mentioning SUPER FAST SHIP! A+++++++ for you!
Hey. I just received my two 14500 IMRs, however the diameter is just ever so slightly too large for the bats to fit an ICON. I'm guessing its probably not a good idea to remove the outer skin, but I figured I'd ask regardless to see if there was a way to reduce the diameter without destroying the bat. Thanks
I absolutely would not remove the skin. That usually directly covers/holds on to the safety circuitry.
Thats kind of what I figured, but I thought it wouldn't hurt to ask. They fit fine in my VYPR and Provape, so they wont go to waste.
just got my dripping atties! of course i didnt wait for the drip shield thing,there was some minor leakage,nothing that cannot be dealt with, and the shield should be here 2morrow, ANYWAYS ..... HOLY
i got the yellow swirl tip and the white and black swirl tip >.< dropped my mod and the white and black tip broke in half, shoved the bottom half of the tip all the way down in the atty, and guess what....ATTY IS FINE. (but i really really liked the white and black swirl
i do think there is a bit of a learning curve with these, but once they are broke in, and you learn to vape with caution, lol, your golden!
oh and worth mentioning SUPER FAST SHIP! A+++++++ for you!
I love it when I get this reaction from people. THATS WHY I DO THIS! HAH!Dont forget folks 5 packs of the Boge LR cartos for $7.05 until midnight tonight then they go to $7.42 which will be the regular price. Which is still quite a fair price I am thinking.
What ohms you guys want? Vote folks I will get two different ohms for y'all. I will keep the price down the same as the dripping atties
To be more specific a low res like 1.5-1.8ohm
and a high res around 2.8-3ohms
If i get 3ohms the 6v folks will be happy too.
Last edited:
lol not sure so I just put one in the mail for you now, you should have your tracking info.
I can do either, really.
I've got 3.7v and 5v mods and of course variable voltage I just want cheap, primer-less attys
I can do either, really.
I just want cheap, primer-less attys
Sounds like I better order both!
I ordered some 510 1.5ohm I think your going to love them.
oh and FYI for you international folks, I now have the international shipping working.
Last edited:
Sweetness, got an estimated time of their arrival, so that I may save up the $$$ for their coming?
Oh, and THANK YOU!
- Status
Similar threads
- Locked
