Samsung INR18650-35E 3500mAh 3,7V - 18650
These are the new batteries I ordered. They have a "not for vape" warning on them. Can I still use them, or is it dangerous?

Plzzz Help me

Thanks to Maskking for sending me this product to review!

Check it out on their website: Masking Vimaxi

Disclaimer: This review contains my own opinions. I am not affiliated with Maskking, nor am I being paid for this review.

Specifications:​

• Size: 51 × 27 × 91.76 mm
• Battery Capacity: 600mAh (Rechargeable)
• Resistance: 1.2Ω
• Weight: 78g
• Puff Count: Up to 20,000 puffs

Design​

The Maskking Vimaxi 20000 is a bold and modern-looking device with an ergonomic yet slightly bulky form factor. It feels comfortable in hand despite its size, and the smooth matte finish adds a premium touch. It’s equipped with a display screen, which allows easy monitoring of battery and e-liquid levels. The branding is clean and modern, making it visually appealing without being excessive.

A standout feature is its rechargeable capability, which is essential for a high-puff disposable. The USB-C charging ensures quick recharges, meaning you won’t run out of power unexpectedly.

Flavors​

Maskking is known for its extensive range of flavors, and the Vimaxi 20000 delivers. Here are the ones I tried:

• Strawberry Lychee - A juicy blend of ripe strawberries and exotic lychee. The sweetness of the strawberry balances well with the floral, tropical notes of the lychee, making for a smooth and refreshing vape.
• Kiwi Watermelon - A vibrant combination of tangy kiwi and sweet watermelon. The kiwi adds a slight tartness that complements the juicy watermelon, creating a balanced and natural-tasting mix.
• Blue Razz - A classic blue raspberry flavor that leans on the sweeter side with a slight tangy edge. It has a candy-like quality without being too overpowering, making it an enjoyable all-day vape.

Each flavor delivers a smooth throat hit and remains consistent throughout the vape’s lifespan, with no unpleasant artificial aftertaste.

Performance​

The Vimaxi 20000 performs well for a disposable of this size. The 1.2Ω coil ensures a balanced MTL (mouth-to-lung) draw, providing smooth vapor production and great flavor consistency. The slightly tighter airflow enhances flavor and offers a satisfying hit.

Battery capacity is reasonable given the 600mAh capacity. A full charge typically lasts me around a day of moderate use, which is reasonable for a rechargeable disposable of this size. The coil and e-liquid capacity seem well-matched, meaning you’re unlikely to burn the coil before running out of juice.

Pros​

✔ Great flavor selection with rich, consistent taste
✔ Rechargeable, making the high puff count realistic
✔ Sleek, ergonomic design with a comfortable grip
✔ Decent battery life with fast USB-C charging
✔ Smooth airflow and satisfying throat hit

Cons​

✖ Bulky compared to other disposables

Verdict​

The Maskking Vimaxi 20000 is a well-designed, long-lasting disposable vape that offers rich flavors, strong performance, and the convenience of recharging. While it is slightly bulkier than some competitors, its ergonomic design makes it easy to hold. If you’re looking for a high-puff disposable with great flavor consistency, this one is worth considering.



Another big thanks to Maskking for sending me this device to review. I had a blast trying it out! Be sure to check out their website for more products. Have you tried the Maskking Vimaxi 20000? Let me know your thoughts in the comments!

Hey everyone,

I just tried the Geek Bar Pulse X 25K Jam Edition Disposable Vape, and it's an absolute treat for anyone who loves rich, sweet flavors! With up to 25,000 puffs, this disposable vape lasts a long time while delivering consistent, delicious hits.

The Jam Edition offers an incredible jam-inspired disposable flavor profile that’s both sweet and satisfying, perfect for those with a sweet tooth.

Equipped with dual mesh coils, it enhances both flavor and vapor production, and the Pulse Mode takes it to the next level for a more intense vaping experience. Whether you're a fan of fruity jams or just want a flavorful, long-lasting vape online, the Geek Bar Pulse X 25K Jam Edition is definitely worth checking out.

Have you tried it yet? What do you think of the jam flavors? Let me know!

Other kits you may prefer:
Kylinbar NOS 30k cheap price
geek bar pulse x 25k slush edition review

The Innokin Coolfire Z80 NEX Kit is crafted for vapers who crave both style and performance in one sleek device. Wrapped in a premium zinc alloy and leather build, this mod feels solid yet comfortable in hand, making it perfect for daily use. It’s powered by a replaceable 18650 battery (sold separately) and delivers a wide wattage range from 6W to 80W, allowing you to fine-tune your vape just the way you like it.

At the heart of this pod mod kit is the TopSync System, a smart integration of top-fill convenience and precise airflow control. Refilling your 5ml tank is a breeze, and adjusting your airflow is just as easy—no need to disassemble anything. It’s paired with upgraded Z Coils, renowned for their rich flavor and satisfying clouds, and fully compatible with the entire Z Coil line for more customization options.

Navigating the settings is simple thanks to the crisp 0.96” TFT screen and intuitive interface. The Coolfire Z80 NEX also includes thoughtful safety features like a manual slide lock switch to prevent accidental firing and a reliable chipset that delivers consistent performance every time.

With Type-C fast charging, durable materials, and a design that fits comfortably in your palm, the Innokin Coolfire Z80 NEX Kit makes premium vaping accessible and enjoyable for everyone. Whether you’re chasing clouds or savoring flavor, this kit is built to impress.

You are welcome to the online vape store uk to get your best vape, and we hope you can enjoy your vaping time.

I'd like to suggest:
voopoo argus g3 kit
vaporesso vibe pod kit

Lost Vape Ursa Pocket Kit isn’t your average pod system—it’s the perfect mashup of cloud-chasing tech and throwback gaming fun. Think retro arcade console in your pocket, but instead of chiptunes, you’re puffing dense, flavorful vapor.



This pocket powerhouse runs on a 1200mAh battery, meaning it’s in it for the long haul. Whether you're at work, on the move, or deep in a Netflix binge, it’s got the stamina to keep up. Type-C charging gets you back in the game faster than you can say “low battery.”

With up to 30W of output, this little beast can handle smooth MTL or a light DTL experience. The Ursa cartridge pod system makes things easy—just fill, click, and vape. No drama, no mess. You get two pods in the kit: 0.6Ω and 0.8Ω, so you’re covered whether you’re craving clouds or flavor.

Now here’s where it gets wild—built-in games. That’s right. Three mini-games including a virtual pet and a puff count competition are tucked into a slick backlit screen. The fire button doubles as your game controller, turning your chill vape session into a full-blown retro adventure. It’s like Tamagotchi had a glow-up and moved into your vape.

Available in eight bold colorways like Cyber Elf and Silver Storm, the Ursa Pocket doesn’t just perform—it makes a statement.

Looking to level up your gear? You’ll find the Lost Vape Ursa Pocket Pod System at our vape smoke shop, where style, performance, and a little nostalgia all come bundled in one sleek package.

You might also like:
jnr vapes
40000 puffs

If James Bond had a vape, it would be the Innokin Coolfire Z80 NEX Kit—sleek, sophisticated, and built for performance. This isn’t some flimsy plastic stick for casual puffers. No, this is a zinc alloy-crafted, leather-detailed powerhouse that means business.



Right off the bat, the TopSync System is a game changer. You get top-fill convenience and airflow control all in one smooth motion. No leaking, no fumbling, just pop the top and fill like a pro. Pair that with the upgraded Z Coil series—yes, all eight of them—and you've got flavor that hits like a symphony, not a solo.

You’ve got up to 80W of power to play with, whether you're into dense clouds or mellow drags. The 0.96-inch TFT screen keeps things simple but sharp, giving you just what you need without a cluttered interface. And let’s talk safety: the manual slide lock prevents surprise misfires in your pocket. Because no one likes a hot leg.

This pod mod kit is powered by a single 18650 (not included); it's both lightweight and long-lasting. The Type-C fast charging port means less waiting and more vaping. All this wrapped in a build that feels as good in the hand as it looks on the shelf.

If you're browsing good online vape stores for your next upgrade, the Innokin Coolfire Z80 NEX Kit is the move. It’s where advanced features meet user-friendly charm—and it’s waiting for you in our shop.

You might also like:
kangvape speedy beast x 60k
geek bar pulse x 25k slush edition

Vapers, get ready for an insane deal on one of the hottest disposable vapes! The (5 Pack) Geek Bar Pulse X 25K Slush Edition (18ml, 5%) is now available at Bellavapor for just $79.95—down from the original price of $134.95! That’s a huge discount, making it the perfect time to stock up on your favorite slush flavors.

​

Why This 5-Pack?​

Unbeatable Value – Pay just $15.99 per vape instead of $26.99!
25,000 Puffs Each – Enjoy long-lasting performance with every device.
Slush Edition Flavors – Experience refreshing, icy blends like Orange Slush, Cola Slush, Grape Slush, Peach Perfect Slush, and Wild Cherry Slush.
Dual Mesh Coils & Boost Mode – For intense flavor and bigger clouds.
18ml Pre-filled E-Liquid – No refilling, just pure convenience.

Limited-Time Offer – Act Fast!​

At this price, these won’t last long! Whether you’re a fan of Geek Bar or looking for the best bulk deal, this is the time to buy.

Shop Now at Bellavapor and save big before this deal disappears!

---

---

---

---

Craving Bar Big Maxx 22K, a disposable device that truly goes the distance. Whether you're a casual vaper or a daily cloud chaser, this sleek and powerful pod kit is designed to deliver unmatched performance, bold flavor, and ultimate convenience — all in one portable package.

With an astonishing 22,000 puff capacity, the Big Maxx 22K prefilled vape eliminates the need for constant replacements. Powered by a 1000mAh rechargeable battery and equipped with Type-C fast charging, you’ll enjoy consistent performance all day, every day. And thanks to the dual meshed coils, each inhale is rich with flavor and thick vapor, making every puff a satisfying experience.

What sets this device apart is its 3-in-1 dual-flavor system. Effortlessly switch between two separate flavors, or blend them together for a personalized taste that’s all your own. No more flavor fatigue—just pure enjoyment on your terms.

The smart LED screen gives you real-time updates on battery and usage, while anti-leak technology and an easy-view liquid level window ensure a clean and stress-free vape from start to finish.

Compact, stylish, and built to perform—the Craving Bar Big Maxx 22K is everything you crave, and more. You are welcome to the best online vape store uk to get your best vapes.

Hot-sale vapes:
caliburn g4 pod vape
voopoo argus g3

In recent years, Lost Vape has revived the panel-style design, inspiring many manufacturers. After releasing a dual, a single, and a "mechanical" dual, the only missing piece was the battery format that once dominated before slowing down: the 21700. The Lost Vape Centaurus N100 Kit is born, gifted by the shop Sourcemore, from which I do not receive any money in exchange for this text.
For many, it strikes the perfect balance between size and battery life, especially with the high-quality cells available today. Also making a comeback is the Centaurus Sub Ohm Tank, which previously accompanied the M200.



Included in the box: the Centaurus N100 box mod, the 5ml Centaurus Sub Ohm Tank, two UB Max coils (X2 0.2Ω and X3 0.3Ω), a spare 3ml glass tube, various o-rings, a 18650 battery adapter, a Type-C cable, the user manual, and the warranty card.



The Centaurus Sub Ohm Tank has been around for a few years, yet Lost Vape has decided to focus on it again. It weighs 67g, with a 24mm base diameter (not 26mm as stated) and a height of 44mm, excluding the pin and drip tip.



The drip tip remains one of the best I've found on prebuilt coil atomizers, featuring a steel base with the rest made of black plastic. It has an 810 connection with O-rings both at the base of the drip tip and inside the top cap. The airflow hole is 9.5mm in diameter, and the length is 9mm when inserted.



The top cap also has an excellent bayonet system, with an O-ring inside that makes the quarter-turn required to unscrew it very smooth, thanks to the grooves that improve grip. The fill ports are medium-sized, but they still allow refilling with any type of bottle.



Top airflow system, with two large slots that allow plenty of air intake. A stopper is present, making it easier to unscrew the Centaurus Sub Ohm Tank from the box.
To remove the knurled airflow ring, the tank must be taken out, as it is held in place by two O-rings. Two tanks included: the 5 ml bubble tank with a 30 mm external diameter and the 3 ml tank.



The screw-on base has a fairly short threading and feels slightly cheap since it doesn’t weigh much. The air intake holes are much smaller compared to competing atomizers, even though the entry holes are standard.
It requires patience to moisten the coils regularly and slowly, as they contain a lot of cotton, and it takes time for everything to get fully saturated.



This is how much the coil needs to be inserted for proper placement without leaks. The base has an initial 24mm diameter, making it aesthetically and dimensionally compatible with many mods, in addition to its branding, CE mark, and disposal information.



The UB Max coils, despite being three years old, feature a mesh section:

- UB Max X3 0.3Ω (40-60W) mesh in Kanthal (included in the kit)
- UB Max X2 0.2Ω (60-80W) mesh in Ni80 (included in the kit)
- UB Max X1 0.15Ω (80-120W) mesh in Ni80

What sets it apart from other atomizers is the mesh, which, if you're like me and avoid Ni80 as much as possible, the Kanthal mesh version is appreciated. You don't feel the three years of age compared to coils released this year, but they’re not superior in terms of longevity or flavor.
The benefit of the kit format is the savings, you save a good amount compared to buying the box and atomizer separately. In this context, you pay around €10, and it's worth that amount. It’s great if you want an atomizer for menthol flavors without contaminating another atomizer used for creams, if it’s your first cloud atomizer, "or if you need something to use as a daily driver, with the risk that it may break or get lost.



The N100 Lost Vape, 21700 version of the well-tested dual door design that many manufacturers have adopted and reinterpreted in their own way. Lost Vape, to stay ahead of the competition, decided to maintain the design but switch from aluminum to polycarbonate. They had already used this material for the AIO B80 panels, and later introduced the P200, a dual-battery, semi-mechanical-style device entirely made of polycarbonate.



Since July 2024, the P200 has remained intact, with no cracks, and the polycarbonate still has the same "matte" finish that, instead of being polished, offers much more durability and scratch resistance. Lost Vape, in some flyers, claims it weighs only 53g—which would be a record—but in reality, without the batteries or adapter, the weight is 93g. Its dimensions are 97.6 x 38 x 30 mm.



The first panel covers the battery compartment. After many 18650 boxes, the N100 supports both the 21700 and 20700 formats, with the option to still use 18650 batteries using the adapter provided by Lost Vape. Unfortunately, the adapter comes in black, but transparent ones can be found for just a few dollars, so you don’t ruin the box's aesthetic.



The pin isn’t too stiff, making battery insertion easy, and extraction only becomes "uncomfortable" when using the 18650 adapter. There’s a strap with LOST VAPE engraved to help with handling.
As for the second panel, I still don’t quite understand why it exists, unless it's for customizing with different panels (which aren’t sold separately). Both panels have a slightly looser fit compared to other boxes in the same series.



The bottom is fortunately wide enough that I can finally trust a single-battery rectangular box when it comes to stability, even with tall atomizers. The panels have a small notch engraved to help with removal.



On the front side, there’s a pretty significant change for me, even though it’s only aesthetic. After the buttons that matched the casing colors on the M200 and M100, and the completely black one on the P200, here it’s chromed, matching the color of the atomizer in case, like me, you only use those in steel finish.
As usual with Lost Vape, the button is a "4-in-1 jog dial interface" that, in addition to firing when pressed, can be rotated to adjust the wattage, change vaping modes, and it also has an LED that lights up. The screen is a 0.96'' TFT with non-adjustable brightness. There’s the same aesthetic change with the jog dial for the on/off switch. Lastly, it features a USB Type-C port.



The circuit used in the N100 is the Quest 2.0, which keeps the home screen clear but offers very few functions, limited to adjusting the wattage as follows:

- 5W - 39W: Increment by 1W
- 40W - 98W: Increment by 2W

Always remember that rotating backward from 5W will return to 5W, so be careful. Navigation:

- 3 clicks on the fire button: Locks the dial for adjusting the wattage. The fire button will still fire, so for safe transport, it must be turned off using the switch.
- 5 clicks on the fire button: Switches from Normal mode to DIY mode.
- When the N100 is off, hold the fire button and simultaneously turn on with the switch to reset the puff counter.

Despite having two indicators, the LED on the button lights up as follows:

- 19% and 0%: Red
- 39% and 20%: Transparent / Normal light
- 59% and 40%: Blue
- 79% and 60%: Green



DIY Mode offers a light boost, designed for complex coils, though there’s no restriction on using it with the Centaurus Sub Ohm Tank.

All warnings are indicated by a purple light flashing 3 times:

- Check Atomizer: No atomizer detected or resistance above 3Ω.
- Short Circuit: Resistance below 0.08Ω.
- Too Hot: If the temperature exceeds 85°C, the device shuts off until it drops below 65°C.
- Over 10s: Cutoff after 10s of continuous puffing.
- Low Battery: Battery at 0%.



The rectangular design with a 21700 battery is just as functional as dual-battery setups. The "larger" dimensions feel more justified, enhancing the stability and sense of security of the mod. Thanks to the material, some weight is also saved.
The Centaurus Sub Ohm Tank continues to be offered despite its age at a "controlled" price. For a few $ more than the N100 alone, it's a reasonable choice, especially considering the Kanthal mesh coil option.

For purchasing, the Lost Vape Centaurus N100 Kit is available on Sourcemore at a special price of $34.69 www.sourcemore.com/lost-vape-centaurus-n100-kit.html

As always, thanks to the community and the e-cigarette-forum staff, as well as Sourcemore for the gift.

I am certainly have a 'love/hate' mindset regarding disposables. I really like seeing someone 'maintaining their nic level' with one of these contraptions rather than a cigarette, but..

Big Tobacco targets Trump in hope - and fear - of change

Hundreds have applied for vape industry’s first ever Chief Misinformation Officer role - to help tackle surge in vape misinformation online, according to Riot Labs.

100s Apply for Misinformation Post (planetofthevapes.co.uk)

Hello this is my first post here. I like making vape pods easily refillable and so they don't leak. Any questions are welcome. Like they say knowledge is power.

Vaporesso Vibe Pod System is equipped with the latest VAPORESSO Dual Mesh technology, which enhances the flavor and lifespan of the pods while ensuring safety and reliability.power by built-in 1100mAh and this kit ensures up to 5,0000 puffs for an uninterrupted experience. Paired with the Axon Chip, the device offers a smarter, simpler experience with ECO/PWR dual mode switching, providing a unique experience. Its design is youthful and diverse, making it a great fashion accessory as well.

Brand: VAPORESSO
Dimensions: 121.1 * 25 * 16mm
POD Capacity: 4.5ml
Resistance Range: ECO:14W,0.8ohm PWR:24W,0.4ohm
Battery Capacity: 1100mAh
Charging Current: DC 5V/2A, Type-C
Display: 0.54inch TFT Screen

Click here for more:
Vaporesso Vibe Pod System kit: https://www.healthcabin.net/vaporesso-vibe-pod-system-p/30319.html

Let’s be real—pods don’t usually get the spotlight. But the Freemax EVOX Pod Cartridge isn’t here to sit quietly in the shadows. This little 5ml flavor factory is built to elevate your vape game without demanding attention. It’s like that friend who always shows up, always delivers, and never complains.



Thanks to FM Leak Resistant Technology, your pocket won’t turn into a sticky mess. The days of “whoops, there goes my juice” are officially over. Whether you’re rocking the 0.6ohm for bold clouds or the 1.2ohm for stealthy smoothness, this pod has a resistance level for every kind of vibe.

And get this—it’s giving disposable vape energy without being, well, disposable. You get the same satisfying taste, but with the perks of a refillable system. That’s what we call an upgrade. Plus, side filling means less fuss, more fill. Easy access, zero drama.

Of course, it’s tailor-made for the Freemax EVOX Pod System Kit, so if you’ve already got the device, this cartridge is your perfect match. Like peanut butter and jelly. Or clouds and sunshine. You get the idea.

If you're on the hunt for pods that pack flavor, stay clean, and fit your EVOX like a glove—look no further. You’ll find the Freemax EVOX Replacement Pod Cartridge at all the best vape shops, including ours. Stock up now and show your device the love it deserves.

You might also like:
geek bar pulse x 25k zero nicotine
oxbar ice nic control 35k

Hey everyone,

I just picked up the Innokin Coolfire Z80 Nex Pod Mod Kit, and it’s quickly become one of my favorite devices! This kit combines power and precision with its impressive 80W max output, perfect for both beginners and experienced vapers. The Z80 Nex offers fantastic customization options, thanks to its advanced chipset that delivers accurate performance and a smooth vaping experience.

One of the standout features is the smart coil detection and the F0 mode, which automatically adjusts your settings for the best possible vape. It also has a sleek, ergonomic design, making it super comfortable to hold and use.

Whether you're into MTL or DTL vaping, the Coolfire Z80 Nex Pod Mod Kit delivers with incredible flavor and vapor production. Plus, with its fast Type-C charging, you won’t have to wait long to get back to your vaping sessions!

Anyone else tried this kit? What’s your take on the Coolfire Z80 Nex? Would love to hear your experiences!

Other kits you may prefer:

Vibe Nano Kit is compact, portable, light and stylish. It is equipped with Vibe Series Pod that utilizes dual mesh tech to perfectly achieve seamless switching between ECO and PWR mode, delivering a smoother and longer-lasting taste. In addition, the use of Axon chip offers a simple one-button operation to bring you convenient and intuitive experience. It is powered by a built-in 1100mAh battery with Type-C charging. With RGB LED indicator, it can show you battery status. The airflow and power adjustment system also allow you to customize your vaping. The auto draw activation design makes instant vaping possible. Just get it.

Vaporesso Vibe Nano Kit Giveaway, 1 winner, ends on Apr. 15th, 2025

Enter here

Sale time: Apr. 2nd - Apr. 6th

10% OFF SITEWIDE Coupon: QM10
Bronze Level Exclusive 5% OFF Coupon: QM5 (Must log in)

Enter here<<< https://www.sourcemore.com/

.

Alright, here’s the scoop: the Flum UT Bar 50K isn’t just your average puff machine. This dual flavor disposable vape is like carrying two dessert menus in one slick package. One side might be fruit blast, the other pure mint madness—you’re the DJ of your taste buds now. Just flip the switch (well, not literally, it’s draw-activated) and change your whole vibe.



Now let’s talk power. This little beast hides a 760mAh rechargeable battery, giving you up to 50000 puffs in Eco Mode, or 25000 puffs in Turbo Mode when you’re feeling wild. Think of it as fuel-efficient OR fast and furious—you choose the ride.

But wait. There's more. The double tank design is genius—two flavors, one device. No awkward mid-week flavor fatigue here. Digital display tells you everything you need to know—battery life, flavor status, the whole story. It even has airflow control for customizing each drag to your mood. Plus, it’s soft and squishy, which sounds like a weird flex, but it’s oddly satisfying. Stress ball meets vapor cloud? Sold.

And yes, USB Type-C charging, because this isn’t 2014.

If you’re ready to puff like royalty without torching your wallet, you know where to go. Grab your Flum UT Bar 50000 Disposable Vape at the cheapest online vape store—MoreVaping. Your vape, your way, for way less.

You might also like:
disposable vapes under 10
bounce turbo 50000

Purchasing stuff from @Ollie Switch was a wonderful experience. Ollie is very responsive, and was patient with all the back-and-forth questions I had. Ollie shipped the items promptly and packed them very well for transit. All the items arrived as expected, in better condition than was advertised. Ollie underpromises and overdelivers - I will happily continue purchasing from this member.

Thank you Ollie!

It’s no joke—Bellavapor is offering 18% off sitewide for April Fool’s Day ! From now until April 10th, use the code FOOL18 at checkout and enjoy some seriously awesome savings on your favorite vapes, e-liquids, and accessories.

Whether you're stocking up on disposable vapes, upgrading your pod system, or exploring the latest e-liquid flavors, now is the perfect time to shop and save!

Here’s what you need to know:

• 18% OFF sitewide—no tricks, just treats!
• Use code FOOL18 at checkout to unlock your discount.
• Offer valid from April 1st to April 10th.
• Perfect time to grab your favorite products and try something new.

Don't miss out—these deals won't last long. Head over to Bellavapor and make the most of this April Fool’s Day sale! Treat yourself and your vape game today!

Smoant generously sent me this device for free, with no payment involved for writing this text. Although it's been on the market for a few years, it immediately caught my interest when I discovered it.
The Knight 80 Kit could be described as a simple flavor-focused MTL pod with a removable 18650 battery, but that wouldn't do justice to the many small details Smoant included to help it stand the test of time.



The packaging is a plastic sleeve, a choice in line with other manufacturers, but it already hints at the attention to detail for a product that, despite its entry-level price, can satisfy even more experienced vapers. Made of rigid black cardboard, it features the Smoant logo. Inside, you'll find the Smoant Knight 80, a USB Type-C cable, a rigid black cardboard pouch containing the manual and warranty. Already installed and included in the package is the Knight 80 base, along with one K-Coil and a second one packed in a plastic bag.



Dimensions of 90*45*27mm, made (almost) entirely of zinc alloy, and weighing 149 grams. Not too much, not too little, considering that compared to an atomizer + mod combo, you save quite a few millimeters. It delivers from 1 to 80 watts with a circuit. It’s possible to use pre-made coils, but also choose from two RBA options, similar to those commonly used in AIO BB-style devices today.



A sign of the times, the "pod" from Smoant was simply called a Cartridge, a term that didn’t carry the meaning it does today—referring to pods with integrated coils. In this case, nothing goes to waste, with replaceable coils (and RBAs). The 510-like adapter, which allows for the installation of any drip tip, also serves the function of adjusting the airflow by rotating it, as it has two holes that partially restrict the air coming from the Cartridge. Rather than rotating it to adjust airflow, you need to pull it out and reposition it as desired. It's not as convenient as an airflow ring on an atomizer, but it's a hundred times better than having to open panels, adjust airflow, and close everything again.



Be mindful of the 4ml capacity—there's also a TPD version with just 2ml, which really limits the potential of the Knight 80. The Cartridge is made of thick, opaque PCTG, far from the thin, flimsy cartridges of today's pods. I've noticed that some stores still have them available. The refill process will be shown in a later photo, and it’s done via a black cap, slightly thinner than today's standard.



The coil section reveals a device designed for RDL, though adaptable for MTL through the purchase of specific adapters and/or RBAs.

- K-1 Mesh Coil 0.3Ω (50-65W) (included in the package)
- K-2 Dual Mesh Coil 0.4Ω (35-50W) (included in the package)
- K-3 Half-DTL Mesh Coil 0.6Ω (20-25W)
- K-RBA Coil (0.3Ω-2.0Ω, rebuildable)

- Pasito Mesh Coil 0.6Ω (20-35W, requires Pasito adapter)
- Pasito Ni80 Coil 1.4Ω (10-13W, requires Pasito adapter)
- Pasito RBA Coil (0.5Ω-1.0Ω, rebuildable, requires Pasito adapter)



First observation, the Pasito adapter/base is different from the one used on the Pasito Pro that I own, and it doesn't fit.
It's something you buy separately, just a few euros to use MTL coils and RBA. In the picture, you can see the Knight 80 base/adapter, which is included in the package. You simply screw the coil on top, then press it into the Cartridge. If you’re not fond of aftermarket accessories, considering that the price of the Knight 80 is already at the entry level, adding few bucks to make the device more versatile isn’t too much.



Here is the cap visible on the back of the Cartridge for refilling, along with the coil and adapter inserted, showing how much they need to protrude. What sets this device apart from other pods, bringing it closer to the BB/Aio world, is the fact that it includes an RBA made of only two pieces, as the "chimney" is already installed inside the pod. The K-RBA has an airflow that ranges from an open MTL to a flavour-oriented draw. In its packaging, you’ll also find the base with a 510 connection to set the coil on a box mod, along with a small pad of Muji cotton, a screwdriver for the screws, and a piece of wire.



Parallel posts, with the legs tightening not under the screw heads but in the posts themselves, making rebuilding much easier. Generous under-coil airflow, but with the option to close it. No JFC present, as the cotton does all the work, with notches to place the wicking tail, which requires at least a 2.25mm tip, and no need to thin it out.



The Cartridge attachment is done not only with magnets but also via a small tab on the Cartridge itself, which fits into the body of the Knight 80. So, despite the open design that allows the Cartridge to breathe and prevent condensation build-up, you can rest assured that it won't come out easily.



Just below the pod compartment, there's the USB Type-C port along with the Smoant-branded USB cable. It's impossible to operate on what are spoilers, the profiles of materials for temperature control vaping. The supported charging, although it's always better to use external chargers, is 5V/1A.



On the side opposite to the USB Type-C, there's the slightly rectangular fire button. It's convenient for firing in terms of position, but a bit less so when it comes to turning the device on or adjusting the vaping modes. Nothing insurmountable though, as the menu is quite simple and easy to navigate.



On one side, the panel can be removed to reveal the battery compartment. It only supports 18650 batteries, and while the 21700 format is becoming popular, this remains a pod/AIO. This means that unlike devices with integrated batteries, you won't face the "dead time" during recharging. When the 18650 battery runs out, just replace it, and there's no need to worry about the normal degradation of integrated batteries. There is no lanyard, but there is a small gap between the shell and the battery. By lifting the cell towards the mobile pin, it allows for easy extraction without damaging the wrap.



The large base allows the Knight 80 to stand upright. As proof that this is an "older" model, it features vent holes, which many manufacturers now consider optional due to the additional engineering involved. The CE logo and disposal markings are engraved.



On the front, the 0.96-inch OLED screen, which unfortunately isn't visible due to the strong lights I use, but under normal conditions, it's bright enough both outdoors in the spring sun and indoors under regular lighting. Just below, the up and down buttons, or + and - as I call them. They're slightly small, but they click well. However, it takes a bit of practice to locate them easily when also using the fire button while navigating through the menu.



The Knight 80 is equipped with a version of the Ant-Chip, offering various features, whether you consider it as an AIO or remember that it is essentially just a pod. On the screen, you'll find a puff counter and timer, along with the voltage display. With pre-made coils, it periodically suggests the recommended wattage.

Navigation:

- 5 clicks of the fire button to turn on/off
- 3 clicks of the fire button to enter the mode selection menu
- + and - buttons to lock the controls, fire button will not fire
- Fire, +, and - buttons pressed together to reset the puff counter

Vape Modes:

- VW
- TCR – to set TCR manually
- SS, TI, NI – preset profiles
- Bypass – delivery based on the measured resistance in ohms
- DVW – power curve, navigation:
- + and Fire: Adjust the wattage for the level
- - and Fire: Adjust the duration in tenths of a second for the level
- To scroll between levels: Press the fire button quickly
- To confirm the selection: Hold the fire button for one second



Attention to the DVW mode, which by default has a curve set up to 30 watts. Otherwise, it's similar to what I had already used on the Pasito Pro. This mode, along with its RBA, offers a lot, from a preheat for complex coils to an eco mode.

Other performance aspects of the circuit, since this is the first time I'm trying the Ant-Chip with an external battery: the activation, or "missfire" is non-existent,. The performance is on par with other commercial circuits, no miracles, but no battery drain when the Knight 80 is idle either. Smoant itself, I noticed, made box mods for a period, with dual batteries, so they know a thing or two.



Smoant Knight 80 teaches us that sometimes, when it comes to new things, we need to look to the past. Many choices that were once standard are no longer considered by manufacturers today. The build quality of the Knight 80 battery body and the Cartridge is very good and meets modern standards.
Ant Chip circuit is excellent, just like the one on the Pasito Pro. It does offer bypass mode, a power curve, and variable wattage, which are features you don't even find all together on regular box mods anymore. For more info: https://smoant.com/pod-systems/knight-80-kit-smart-ant-chip-starter-kit/

I thank e-cigarette-forum, the community, and its staff for the space, and Smoant for the free gift.

"The agency’s tobacco director, Brian King, notified his staff in an email: “It is with a heavy heart and profound disappointment that I share I have been placed on administrative leave.”

Dozens of other employees in FDA’s tobacco center also received notices Tuesday morning that they were being dismissed, including two entire offices responsible for drafting new tobacco regulations and setting policy."


.

Hey, I am new here

I am desperately looking for an original Hammer Mod from Kato. Is anybody willing to sell me one?

See you in the comments
Tschoni