I've got 3 Subox Minis, all bought from the same place, at the same time. One has been used every day, the others were still new in the box until today. With my used one, after I build the coil and put it together, it reads .5 ohm just fine. But I can take that tank and put it on the unused box mods and they both read .33 ohms. Is there a connection problem or is it possible that I got 2 counterfeit mods?

What I want to evaluate for you today is a large puff disposable kit from aroma king, aroma king ak5500 metallic, which features an exquisite and simple design, which is also a feature of most disposable vapes.

The device can be activated by inhalation. As a disposable that can be recharged, it provides you with a 650mAh built-in battery, which cannot be disassembled, so the battery also has a certain lifespan.

The pre-filled 10ml e-liquid provides up to 5500 puffs of inhalation, as a 5000 puffs vape, you can enjoy vaping for at least ten days. If you are a fan of 0 mg nicotine salt, then we believe that the 0mg launched this time can meet your standards.


And the dual-coil configuration also ensures that there will be no dry burning or short circuit during use, and it can volatilize the e-liquid better and more comprehensively. Provides the purest and most authentic taste. 20 kinds of flavours, mixed with a variety of fruity tastes and ice tastes, you can choose as you like.

We have more choices in the best vapes 2022, and affordable and quality-guaranteed products can be easily obtained.

More products you may want to know about:
freemax maxus 2
best aroma king dark knight

Eleaf IORE LITE 2 Kit is powered by a 490mAh battery and can accommodate 2ml of e-juice. Compatible with IORE LITE 2 refillable pod cartridge, each pod has an integrated 1.0ohm mesh coil. There has an indicator light for battery status, and each IORE LITE 2 serves max 12W output. IORE LITE 2 refillable&replaceable pod can last up to 10 times of refill, more economical than disposable pods. The side refilling makes refill of the pod a breeze.



Features:
1. Super Light and Portable
2. Five Bright Colors
3. Pure and Consistent Flavor
4. Economical Refillable Pod & Refilling in a Breeze
5. Enjoy the Simplicity: Plug-and-Play
6. Bigger Battery for Vaping Longer
...

Click here for more:

Iore Lite 2 Kit: Eleaf Iore Lite 2 Pod System Kit

On the left, with great hand feel imho (weighty, solid) and built like a tank is the Geekvape FC1. The pods leak often from the bottom and taste is so-so.

On the right, with cheap hand feel imho (light, disposable), poor drop resistance, but no leaking and fantastic flavor is the Vaporesso XROS2.

Is there a device that is basically a head on collision between these two devices? Solid and weighty, doesn't leak, good flavor?

I'm looking for a nice out-and-about hiking pod system. A "high end pod"? That's an oxymoron I guess... If nothing else comes in the radar I'll just make a cool metal case for the xros and call it a day

Thanks for reading! Happy Holidays ECF fam!
AD

Hello,

I'm using a vape for 15 days now. I have smok arcfox 230W and using TFV18 meshed 0.33ohm coils.
I have tried to find information in internet for my problem, but had no luck at all. The coil needed a replace after 1 day of use, especially in the morning when was not used whole night.
I'm using nasty juice modmate watermelon ice or strawberry kiwi VG/PG-70/30 mixed with fusion nicotine shot.
Was using the vape with 120/110W, but was getting too hot. Then now im using on 80W and last a bit longer.
I have tried different things i found in internet, but had no luck.
Before 3 days i realized that the coil mesh is burnt in the upper area when where was no liquid:


So after that i've started to fill the tank so the mesh is completely in liquid. After then i have no problem.
If someone have idea if thats expected behavior please let me know. It could be a coincidence that it is working ok like that.
Regards

On behalf of @Katdarling and myself, HAPPY BIRTDAY, ECF!!!

December 11th, 2007 (dayum!!!).

Back before "Vape" was even a word, and back before 99% of us ever tried an e-cig, ECF was born, This place that many of us have called home for so long, without which some (me!) might never have succeeded with the groundbreaking (at the time) technology, was delivered by the proverbial stork.

Or maybe it was (untaggable) Oliver. No matter - it appeared!

And for it, we are thankful. To ALL of the wonderful people who've put so much into keeping this place alive for 15 years, we sincerely thank you.

While I don't completely trust my memory, I'm going to attempt to call out or tag the humans behind the curtain here. If I forgot anyone, please accept my apologies and don't be shy in pointing it out. I'm anything but "sensitive" about my own shortcomings.

Oliver (obviously)
@low_tar_neil
@classwife
@retired1
@Misty
@Unforeseen
@sonicdsl
AngusATAT
oldsoldier
Dusty_D
Rolygate
lightgeoduck

Robino1

(I was unable to tag Robin too, but I DO so hope she's still watching us. NEVER out of minds.)

Thank you all SO much. We know that this place doesn't run itself, and we appreciate your efforts more than we may acknowledge. I, for one, am often comforted by the fact that ECF is here whenever I want or need it. The knowledge, experiences, friendships, and (at times) FLAT-OUT-FUN that this place has provided deserves one HECK of a big cake.

Again, thank you all for your time, energy, and commitment. Oh yeah! And "PATIENCE"

May we all be here to do this again in another 15 years, and you are all very much appreciated.

Sincerely,
K&D

* Added a few old names per my request to @classwife , who has simply NEVER failed me <3

£7 for each bottle pictured plus postage looking to move this lot on as I’m trying my hand at diy.

Hello fellow ECF members.

You can check my DRAG 4 review Here

Hello fellow ECF members.

Today I'd like to discuss the VOOPOO DRAG 4 Kit that was sent to me by VOOPOO for the purpose of providing a fair and honest review.

I've tested quite a few Voopoo devices in the past and I can confirm that they are almost always a great example of innovative features/design and a reasonable price.
You can check some of my previous reviews on their devices Here and Here

This mod is the 4th Generation of the Drag Series which is one of the best selling Vapes series in history and has a lot of fans all over the world and on ECF as well. I was very excited to check all the new things about it. Let's see what it is all about together.
The kit comes with the new Uforce L tank which is also an interesting add-on by itself.

Intro from Voopoo:
DRAG 4, released by VOOPOO in 2022, is the fourth-generation MOD of the DRAG series. It is the development of innovations in DRAG 1, DRAG 2, and DRAG 3. Drag 4 Kit is composed of Drag 4 Mod and UFORCE-L Tank. It is powered by dual external 18650 batteries with 177W max. With the ECO Mode and 5V/3A Type-C fast charging, it features less charging time and more vaping enjoyment. By utilizing the new TC Mode, it can match the 4 heating materials like Ni200, Ti, SS316, SS430 more effectively and meets the specific need for DIY users. The multi-function switch makes it easy to define QS lock's functions like lock wattage, lock device, and power off. The new UI design allows you to define your style with 4 optional colors. In addition, it also features replaceable and durable magnetic battery cover. The UFORCE-L Tank features 4ml/5.5ml e-juice capacity and easy top filling system. It is designed with 3-hole top air inlet to deliver the balanced & sufficient airflow and avoid condensate and e-juice leakage effectively. The 360° adjustable airflow can also customize your favorite flavor. By adopting the innovative 510 base with heatsink design, it is easy to clean. Drag 4 includes new PnP Coil 0.15 Ω/0.2 Ω with Dual In One Tech in the package to bring you richer taste, denser cloud and longer lifespan. It is compatible with all PnP Coils

There are 2 collections available:
the Resin and the Wooden. I've got the Pale Gold and Walnut option and I personally Love it.
Very stylish wooden accents and the leather end side create a very unique combo and the device looks pretty fancy.

What's inside the Box:



• 1x Drag 4 Mod
• 1x UForce-L Tank 4ml
• 1x Coil PnP-TW20 0.2Ω 40-55W
• 1x Coil Pnp-TW15 0.15Ω 55-70W
• 1x Bubble glass 5.5ml
• 1xSilicon rubber pack
• 1x Type C cable
• 1x User Manual

Key Stats:



For the Wooden collection - Mod Material: ZInc Alloy+Leather+Solid Wood

Key Features:

Unique Appearance:
The main elements of the DRAG 4 devices are leather + zinc alloy + walnut. DRAG 4 also includes the resin elements in the official release edition. Each DRAG 4 is unique in appearance as they have unique resin and walnut pieces, demonstrating the uniqueness and noble temperament of each DRAG user. The C-shaped magnetic battery cover is easy to attach and remove and it could be closely connected with the mod even if the device is accidentally dropped. It's durable and fall-resistant.

Unique Interaction Experience:
The multi-function switch is available to define QS lock to lock wattage, to lock a device, or lock power at your will. Besides, the upgraded UI interface that separates the function keys enables users to avoid unintended ignition caused by mistaken touch. The new TC mode accurately identifies the four commonly used heating wire materials, Ni200, Tl, SS316, and SS43, and then adjusts their temperature to the most recommended range.

Compared to Vinci SE and the Uforce Tank:

So it's about the same height as SE and about 2.5 times wider. It has a decent weight and a very comfortable handgrip to it.

The Third Key Feature of the Kit is the Uforce L tank and its specs:


Instead of using the UFORCE range of threaded coils, the tank has been adapted for use with the ever popular PNP range.
I support this change and I believe the Uforce L tank is a great addition to the Drag 4 Mod. It is btw the VOOPOO FIRST PnP atomizer with three top air inlets. It balances the airflow directions and increases the airflow passthrough, making the airflow smoother and bringing a rich and delicate taste. The top air inlets also balance the pressure inside and outside the tank so that the poorly atomized e-liquid and condensate could be firmly stored even when the device shakes heavily.

Resistance Range: is impressive 0.05-3.0Ω
As was already mentioned, it's compatible with All PnP Coils.




The tank is around the size of a standard e-juice bottle. It's a very solid build tank with polished metal parts. It is easy to assemble and disassemble and the airflow adjustment is better than in most tanks I tested before.
Vapour production and tastewise I'm also pretty impressed with it.
I mostly tested it with the PnP-TW20 0.2Ω at around 40W coil and I had a Great vaping experience with it.

Had no leakage issues with it during the testing period.

Pros:
Reasonable price considering the Quality (around £50 in the UK)
New technologies and protection features used
Unique design and 2 series to choose from: Resin/Wood
Quality build
New TC mode and an improved Gene TT 2.0 chip
QS lock feature
PnP coils + Antileakage system + 360° adjustable airflow
Innovative 510 base with heating
2x18650 batteries with Type-c charging option

Cons:
The charging cable is very short.

My Final Thoughts on DRAG 4 kit:
Once again I can confirm that VooPoo is doing a Great job with their latest devices and the 4th generation of the Drag Series might be a great addition to every Vaping Collection. The device has a unique appearance with fancy resin/wooden details and some great technical innovations included. The tank is also great especially with the PnP coils compatibility and the improved airflow.
I believe it's a Great product and it is very reasonably priced which is also important in this difficult period of time both politically and economically we live in.
Keep vaping and Stay Safe my Friends

Overall rank 9.2/10 by Dreamvaper.
Can Definitely recommend this Kit

Hi !
I see other threads about this but all of them are closed.
I donated some months back.... wondering why I don't have my badge up ?
Hope to hear from you soon !

With the advent of the 4th generation of pod kits onto the market, it was only a matter of time before Vaporesso decided to overhaul their star pod system, the XROS, with newer features to release it as this new wave of pod hit the market.

CHAPTERS

00:00 - Intro and specs
03:00 - Close Up
07:00 - Vape
08:00 - Thoughts

Rumble - Login to view embedded media
YouTube - Login to view embedded media

Hello and welcome. I’m very glad to be here today with you to discuss the latest addition to the Lost Vape Thelema line of kits. So far we’ve seen the Thelema DNA250C, the Thelema Quest, the Thelema 80w, The Thelema DNA100C, and the Thelema Solo 100. Lost vape has done it again and this time I was sent the Thelema Mini Kit in order to provide you with a fair and honest review. The Mini has a maximum output of 45 watts while utilizing a 1500mah internal battery. The body is made of zinc alloy and it has a leather like backing on it. The tank included in the kit is the UB Lite Tank which promises a tight MTL to DTL performance. It has a liquid capacity of 3.5ml and the kit includes different two coils so you can sample both types of vaping I mentioned. Will it deliver on the promises? I sure hope so but stick around until the end of the review and I’ll tell you about my experience with each coil.





WHAT’S IN THE BOX?

1pc Lost Vape Thelema Mini Device
1pc UB Lite Tank (3.5ml)
1pc UB Lite L7 Coil 0.3ohm
1pc UB Lite L8 Coil 1.2ohm
1pc Spare Glass Tube (2ml)
1pc Spare Parts Pack
1pc RDL Drip Tip
1pc MTL Drip Tip
1pc Type-C Cable
2pc User Manual
1pc Warranty Card

SPECIFICATIONS:

Power Range: 5-45W

Capacity: 3.5ml (Standard Edition)

Coil Resistance Supported: 0.2-5.0ohm

Current Range: 1-15A

Display: 0.69 inch OLED Screen

Battery: Built-in 1500mAh battery

Battery Voltage: 3.0-4.2V

Body Material: Zinc Alloy & Stainless Steels

Charging: Type-C charging

Compatible Coil: UB Lite Coil

0.3ohm Mesh (45W, DTL, Freebase)

0.6ohm Mesh (20-30W, RDL or Loose MTL, lower NicSalt Freebase)

1.2ohm Mesh (11W, MTL or Nic Salt)

FEATURES:

• Dimensions: 123.45mm by 32.8mm by 24.6mm
• Battery: Built-In 1500mAh
• Wattage Range: 5-45W
• Voltage Range: 3.0-4.2V
• Resistance Range: 0.2-5.0ohm
• Display Screen: 0.69" OLED
• Chassis Material: Zinc-Alloy + Stainless Steel
• Diameter: 22mm
• Widest Point: 22.8mm
• Glass Capacity: 3mL
• Fill System: Threaded Top Cap
• Tank Material: Stainless Steel
• Coil Series: UB Lite Coil Series
• Coil Installation: Press Fit
• Coil Resistances: 0.3-1.2ohm
• Tank Airflow: Dual Slotted Bottom AFC - MTL or DL

INITIAL THOUGHTS:

I was a little surprised that the front of the box for the Mini was blue. Normally I would see a white box with black lettering. Anyway, it’s not bad, just different. The Lost Vape Quest and logo are near the top left. There is a picture of the actual device contained inside which I like instead of using one image for all versions. I received the Titanium Green version for this review. No complaints here. I like all of them besides the pink and purple versions. The back side of the box has a list of contents, company information, a warning, authenticity code, and a bar code with color version. My box says titanium green but that isn’t one of the colors listed but believe it is the same as the dragon green.

One side of the box has a list of features with icons while the opposite side has the Lost Vape Quest name and the logo “The Modern Demarcation”.

Once opened, the Thelema Mini is sitting in a plastic tray with the UB Lite Tank attached. To the right of the Mini is a spare bubble glass and a rectangular box with the USB-C charging cable, two UB Lite coils, and an accessory bag with an RDL drip tip and extra seals for the tank. The user manuals for the mod and tank are on top of the plastic tray when you first open the box.

The two coils included in the kit are a 1.2 ohm coil rated at 11 watts and a .3 ohm coil rated for 45 watts. There is also a third coil available but not included which is a .6 ohm coil rated for 20-30 watts.

The UB Lite tank included in the kit holds is easily broken down for cleaning. There are two different drip tips included. The MTL tip comes already installed on the tank and the DTL tip is inside the accessory bag. I really like the MTL tip on this one. It reminds me of some old school drip tips I used to use.

Once the top cap is removed, you can see that there are two holes. The larger one is for filling while the smaller one is the vent hole. Even though it might look big in the picture below, it really isn’t and some bottle tips will not fit through this hole. The coils simply push in to seat and the bottom cap screws on to make connection and hold it securely. The



UB LITE TANK FEATURES:

• Diameter: 22mm
• Widest Point: 22.8mm
• Glass Capacity: 2mL Straight
• Bubble Glass Capacity: 3.5mL
• Fill System: Threaded Top Fill Cap
• Tank Material: Stainless Steel
• Coil Series: UB Lite Coils
• Connection: Threaded 510
• Drip Tip: 510

The Thelema Mini is obviously a shrunk down version of the Thelema Solo. It sports a 1500mah internal battery with an output range of 5-45 watts. It has a .69” OLED display for a user interface. The main body of the Mini is made from zinc alloy with a leather like wrap that covers the back and sides. It has designs embossed on it but it really isn’t padded at all. The name Thelema Mini is printed on one side of the frame while the Lost Vape name is printed on the opposite side.

The top of the mod has the 510 connection plate secured by three torx screws. The threaded 510 connection has a gold plated spring loaded center pin like we’ve become accustomed to seeing on most mods these days. The included tank is 22mm in diameter and is a pretty good fit for the size of the top plate. You might be able to get a 23mm on there with no overhang but feel like a 24mm is going to go over the edge.

The bottom of the mod appears to be made of a hard plastic and is secured with two torx screws. There are three battery vent holes in the base which is a good safety feature.

The front of the mod has a fairly large square fire button that is quite comfortable to use. Below that is the .69” OLED display screen followed by the + and – buttons with the USB-C charging port on the bottom. The charging port allows the user to charge the 1500mah internal battery. I’ve looked a few places and do not see a charging rate listed anywhere for the Mini. If I can remember before I finish writing this review then I’ll dig out my USB charging tester and see what it shows. The .69” display shows the following information.

• Battery level indicator
• Coil resistance
• Set wattage
• Length of time of current puff(10 second cutoff)
• Puff counter

The Thelema Mini is a pretty simplistic device. It only does wattage output. It is considered to be part of the Quest line of products but does not contain the Quest 2.0 display and buttons like we are used to seeing on larger Lost Vape mods. The few button operations available on this mod are as follows.

• Press the fire button 5X to turn the device on/off
• Press and hold the fire button and the – button for three seconds to reset the Puff Counter
• Press and hold the fire button and the + button to Lock/Unlock the adjustment buttons while the mod will still fire.

FINAL THOUGHTS:

I have really enjoyed testing the Lost Vape Thelema Mini for this review. It is indeed a simplified and shrunken version of the Thelema. It is comfortable to hold with its smaller size but performs like a full size mod when using the .3 ohm UB Lite coil. The airflow control with three smaller round holes followed by a larger slotted hole allows the user to go from a tight MTL vape to a very nice RDL in my opinion. The 1500mah internal battery seemed to last quite a while and especially when using the 1.2 ohm coil in MTL operation. There is also a pod tank available for purchase for those that like to use pods. I personally don’t see the point but Lost Vape decided to include it in the information on the Mini kit. I guess it would save one step in coil changing but you would then sacrifice the top fill of the UB Lite tank for a bottom fill pod. Not a move that I would make.

As far as my testing goes, I started out with the 1.2 ohm coil set at the recommended 11 watts and filled the tank with a fruit salt nic that I had left over from another review. I ended up running the airflow with one single round hole open using the MTL tip included in the kit and pre-installed. The flavor production was really pretty good but I yearned for more wattage. After running the coil at 11 watts to break it in then I bumped it up to 13 watts. This was a better fit for me. I don’t really do much low wattage MTL vaping but was pretty happy with this one at these settings.

Next up I cleaned the tank out and wanted to change to the bubble glass but after several tries and not being able to get the straight glass off I finally gave up and just switched to the .3 ohm coil and filled the tank with some Dinner Lady Lemon Tart. I have to admit that I was really surprised by this coil. I know it’s rated for 45 watts but I started out at 25 watts just to be safe. Even at that setting it was a really nice and powerful vape. I did work my way up to 45 watts but at that setting for me it was too warm and after a few consecutive puffs it didn’t seem like the coil was fully saturated. I ended up dialing it back to 28 watts and was very happy with this setting. Great flavor and a respectable amount of vapor. I’ve noticed on many stock coils that even though there is a recommended wattage setting that many times it’s just not a good fit for me.

I’d like to thank Lost Vape and Bella for sending the Lost Vape Thelema Mini 45W kit for this review. Also, thanks to you the readers for making it to the end of another review. Below is a link to the Lost Vape website for your viewing pleasure.

Thelema Mini 45W Kit - Lost Vape

Come to learn more !!!

No matter how I wick this thing, I get juice coming up the chimney into my mouth. It's not flooding. Maybe I am inhaling too hard and it forces liquid up?

The SXK SVA KIMAIO Style 60W AIO All In One Box Mod is made from Carbon Fiber + POM and supports 1W to 60W output. The AIO Box Mod is powered by 1 x 18650 battery (not included) and built-in Evolv DNA 60 Chip. The SVA Kimaio Box Mod is compatible with regular BB / Billet drip tip and BB / Billet RBA Bridge deck / Boro Tank.
More info SVA KIMAIO Aio Mod clone By SXK
Materials: Carbon Fiber + POM
Authentic Evolv DNA60 Chipset
Wattage: VW 1~60W
Powered by 1 x 18650 battery (battery not included)
Compatible with BB / Billet RBA Bridge deck / Boro Tank (RBA / Boro tank not included)
Adjustable stainless steel flush nut for 510 drip tip included (drip tip not included)
With USB power for charging.

QUICK LINK,Click Here>>Buy SXK SVA KIMAIO Style 60W AIO All In One Box Mod Black Evolv DNA 60 Chip

BUY NOW! VOOPOO ARGUS P1 Pod Kit

Features:

• 800mAh Built-in Battery
• 5-20W Output
• 2ml Vape Juice Capacity
• VOOPOO ARGUS POD Cartridge 0.7Ω
• VOOPOO ARGUS POD Cartridge 1.2Ω
• Zinc Alloy&PC Construction
• PD Fast Charging
• Futuristic Mechanical Style
• AI Output Adjustment
• ITO Atomization Technology
• Patent Leakage-Proof Design
• Airflow Adjustment

SPECIFICATION:

• Size: 74.6*46.7*17.4mm
• Output Power: 5-20W
• Capacity: 2ml
• Resistance Range: 0.5-3.0Ω
• Output Voltage: 3.2-4.2V
• Battery: 800mAh Built-in Battery
• Material: Zinc Alloy+PC
• Compatible Cartridges: ARGUS POD Cartridge 0.7Ω/1.2Ω

SUPER CHRISTMAS SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (CS15) TO GRAB 15% DISCOUNT STOREWIDE TILL 25th DEC, 2022

BPMods decided to team up with a number of EU based designers (and reviewers i think) to come up with a different sort of MTL RTA. There is innovation in this one, but not where you would generally expect the innovation to be...

CHAPTERS

00:00 - Intro and specs
03:00 - Close Up
23:00 - Vape
26:00 - Thoughts

Rumble - Login to view embedded media
YouTube - Login to view embedded media

Hi,
The doctor suspects Behçet's disease. I want to start vaping again. I have aphthae in my mouth. Do you mind if I smoke electronic cigarettes? Does anyone use electronic cigarettes and have Behçet's disease?

4 x 60ml Jma designs strawberry ice cream all sealed, can throw in nic shots too £58 shipped in uk

Hi, after the review of Drag 4 Kit I would like to deepen with you the knowledge of U-Force-L Tank illustrating with more detailed images some details that may have been missed.
• Thank you.

► Voopoo U-Force-L Tank; Highlights indicated by the manufacturer:
• 1. Triple air intake to balance the flow and make the flavor tasty
• 2. Top-down airways to isolate condensate and prevent leaks
• 3. 360° airflow adjustment to customize your favorite flavor
• 4. Innovative 510 base with heat sink
• 5. 4ml/5.5ml capacity, easy top fill system
• 6. Compatible with VOOPOO Drag 4 Kit/Mod and all PnP coils
• 7. PnP dual in one technology for powerful cloud and richer flavor



► Voopoo U-Force-L Tank can be purchased separately from the Drag 4 Kit; Packing List:
Depending on the area where this item will be purchased, there may be some different characteristics due to the TPD law.
• 1* VOOPOO UFORCE-L Tank (4ml)
• 1* VOOPOO PnP-TW20 0.2Ω
• 1* VOOPOO PnP-TW15 0.15Ω
• 1* Spare glass container (5.5ml)
• 1* Pack of Spare O'rings
• 1 * User Manual





► Voopoo U-Force-L Tank; Specifications:
The Gif image below shows the tank in domed glass and straight glass (TPD) configuration. The TPD version appears to be 5mm lower.
The diameter at the base is 25.5mm and the height (Standard Version) is 58mm. The construction material used is Stainless Steel + Pyrex. The weight of this robust tank is 90g.



► Voopoo U-Force-L Tank; Available colours:
At this moment the tank is distributed in 3 different and basic colors.



► Voopoo U-Force-L Tank; Exploded view:
Now let's see in detail what is the first VooPoo Sub-ohm Tank equipped with "Top AFC", because it is a particular construction type which, compared to the classic "Bottom AFC" arrangement, is able to eliminate any loss of e-liquid.



This tank can be easily disassembled for cleaning operations and the package is particularly rich in spare silicone gaskets and o-rings.



► Voopoo U-Force-L Tank; Drip Tip 810:
VooPoo (cleverly) made the 810 housing featured in the top cap "standard", this solution allows you to use any 810 Drip Tip equipped with one or two silicone rings. The original Drip Tip has two white silicone rings that offer an excellent grip, the extraction hole at the base is 7mm wide then the chimney widens upwards progressively to end with a 10mm diameter at the top.



► Voopoo U-Force-L Tank; Facilitated refill:
The top cap has a finely knurled perimeter for better finger grip. In fact, with the classic bayonet system, 1/2 a turn is enough to remove the cap and proceed with filling. There are two filling slots with elastic holes to allow the insertion of even fairly wide tips of the respective e-liquid dispensers.



In the image below you can see the large silicone gasket removed from its housing, you can see the shape of the gasket and the protuberance that goes into the single blind hole around the filling slots. You can also see the "bayonet" system for opening the top cap.



► Voopoo U-Force-L Tank; Triple upper vent:
You can rotate the AFC ring on the top of the atomizer clockwise or counterclockwise to adjust the airflow as you like. The three large vents are connected like a funnel to channel and compress the air from top to bottom. In the lower part of the central structure, the three air intakes wrap around the coil at 360°, feeding it in a large and uniform way. Furthermore, the hollow structure in the central part absorbs the noise of the airflow to allow you to enjoy the vape silently and without annoying whistling.





► Voopoo U-Force-L Tank; Central structure of the Tank:
Above the oring for the pyrex glass seal, there are 3 large windows for the passage of the e-liquid towards the coil, these windows are carefully flared on the edges.



In this image I tried to show you the 3-headed dog logo (maybe 3-headed wolf) that VooPoo laser engraved in the center of the supporting structure.



► Voopoo U-Force-L Tank; Base with Heatsink:
On the bottom of the base are; the inscription "VOOPOO", the inscription "Designed By VOOPOO", the CE mark, the disposal logo. The Thread contains a gold-plated, slightly protruding fixed pin.



In this image, you can see the base design that mimics a heat sink to speed up the cooling of the tank. The base joins the central structure via a sliding thread, between the base and the central structure there is a silicone o-ring for a perfect seal.



The base is quite deep to contain the possible formation of condensation without a way out. In the center are the gold plated contact pins for better electrical conductivity to be transferred to the coil. You can see that there is another o-ring on the upper perimeter of the base for a perfect seal with the tank.



► Voopoo U-Force-L Tank; PnP TW Series Coils:
In the image below you can read the details of the new PnP coils of the TW Dual In One Tech series. These coils have been specifically designed for this tank and to offer the best RDL/DL performance.



► Voopoo U-Force-L Tank; Final Conclusions:
Having already talked about the excellent performance of U-Force-L Tank and its coils, I won't be repetitive, you can read my impressions in the previous Review Drag 4 Kit.

If you are looking for a Sub-Ohm tank with great RDL/ DL and you want to hunt big tasty clouds... Buy U-Force-L without worries, because it is easy to use and is compatible with all PnP coils, including the RBA regenerable base.

• The Voopoo U-Force-L Tank Can be purchased separately here:

Rincoe Jellybox Nano 2, with a more prominent design embodies both inside and outside but maintains the inner strength. Upgraded version of Jellybox chip, 26W strong output, multiple lighting effects, give you the ultimate performance.

Parameters
Brand: Rincoe
Unit: 1 Set
Size: 53*19*71.9mm
Capacity: 2.8ml
Resistance: 1.0ohm
Battery: 900mah
Output Power: 1-26W

It is also designed with a variety of light effects and 5 RGB light modes to bring you different visual experiences. It is compatible with Jellybox Nano Pod Cartridge and Jellybox Nano Coil 0.5Ω/1.0Ω. It also has a 2.8ml e-juice capacity and a simple refill system.

The Rincoe Jellybox Nano 2 Kit is small but packed with flavor. It is powered by a built-in 900mAh battery with a maximum power of 26W and supports Type-C charging. It has automatic output adjustment and airflow adjustment functions to bring you a better user experience.

Just click here to have a preview: Rincoe Jellybox Nano 2 Pod Kit 900mAh 26W

Other kits we recommend you:
Rincoe Manto AIO Plus Pod Kit 80W 3ml
Rincoe Jellybox XS Pod Kit 1000mAh 30W

The new manto aio plus kit from Rincoe is very surprising. Among the vape products, the appearance colour and style of this manto aio plus kit are very unique. The retro colour and fresh stick figures let us see the beauty of the vape products and lead the vape products to a new trend.

The design of this pod kit shell is very user-friendly, not only has a unique square button for your control, but also an LED display that allows you to intuitively see the power and status of the device. The 18650 battery provides a sufficient power guarantee for its operation. Its maximum output power is 80 watts. When the battery runs out, you just need to connect the type-c plug to charge it. It charges 50% faster, so you won't have to wait long for a full day of vaping.

To make your vape experience more enjoyable, you have a variety of ways to play. We recommend that you use rincoe pods with a capacity of 3ml, which are the best compatibility. If you like a more intense flavour, you can choose a 0.15ohm coil to experience the dense smoke of DL atomization. If you like a smooth and tangy flavour, then you can choose a 0.3ohm coil. The mesh coil combined with the airflow system is sure to immerse you in the vape experience. You can also use it to try vaping in MTL and RBA modes.

More new products are available in our vape online uk, you are welcome to choose.

You might also like：
best r and m tornado 9000
cheap vandy vape pulse aio mini kit