Check out the Lookah Dragon Egg E-Rig Vapor Kit, offering a 950mAh battery, detachable percolator, and a quartz coil for creating vapor from concentrates. Shaped like a dragon egg, the Dragon Egg Vaporizer offers an all-in-one design to consume concentrates. Adopting the magnetic flip top cap from the Lookah Swordfish Vaporizer, the Dragon Egg can vaporize concentrates underneath the magnetic top cap where a quartz 710 coil resides. This allows users to load in a small amount of concentrate for vaporization, shut the top cap for better heat retention, and simply rip away.

Furthermore, the Dragon Egg Vaporizer features a bottom filtration chamber that can hold water to help cool any produced vapors, sending vapor through the thoracic-shaped percolator. With all parts being removeable, the Lookah Dragon Egg is a breeze to clean.

Details of Lookah Dragon Egg:
Dimensions: 168mm by 55mm by 55mm
Battery Capacity: 950mAh
Resistance Range: 0.6-5.0ohm
Voltage Output: 3.2-4.0V
Chassis Material: Zinc-Alloy
Operation: Button-Activated
Coil Connection: Threaded 710
Preheating Function: 10 Seconds
Charging: Type-C Port
LED Display Screen
Detachable Downstem
Type-C Port
Magnetic Flip Cap
Tempered Glass Straw



Recommended products:

At this happy weekend, I will bring you a brand new product, vaptex mechax kit. First of all, this is a very technological device, you can see its personality from its design. The transparent material can clearly see the configuration inside, including chips and components.

Compatible with a 400mAh battery, it is a small pod vape kit. Through type-c, it can be fully charged in a shorter time and increase the practical frequency. Mechax Pod Kit uses advanced Photo Etching Mesh Technology to make the heat more even and bring a satisfying taste.

The 2ml e-liquid capacity can basically meet daily vaping needs. It can be filled by opening the silicone stopper on the side. The anti-leakage system can keep the e-liquid firmly locked. MTL vaping can be easily delivered through the mouthpiece. Of course, if you have the inhalation method you want, you can freely adjust it through the airflow adjustment button on the side.

If you are looking for a more fashionable and advanced electronic cigarette, you may wish to try Vaptex Mechax Pod Kit, which may open up your new world of vaping. Whether it can become the best vapes 2023 is only up to you to decide.

You may also like:
aegis boost pro 2
drag 4 kit uk

Uwell Crown M Pod Mod Kit

Crown M Kit is supported by a built-in 1000mAh battery to satisfy your daily vaping and entertaining wheel power adjustment for convenient use. It features the independently controlled Twin-Coil design that supports dual output modes(alternative/mutual working mode). Under the alternation working mode (suitable for MTL), the resistance is 0.8Ω and it has clearer layers of taste & longer coil life's span. Under the mutual working mode(suitable for DTL), the resistance is 0.4Ω and it is able to bring thicker cloud and richer taste. In addition, it is equipped with the spare 0.6Ω coil in the package for RDL vaping and please note that the mode-choosing function is disabled with this standard coil. The current working state can be demonstrated by the display between the transparent shell and built-in circuit board. It also features 4ml e-juice capacity, easy top filling system, great leak-proof design and precise airflow adjusting valve. With the improved pod bottom structure, it can elevate the e-liquid utilization. By adopting Uwell's upgraded Pro-FOCS flavor adjustment tech, it can ensure the restored flavor and premium taste. Just get it.

Details:
1. Powered by built-in 1000mAh battery
2. Dual output modes for your option
3. Entertaining wheel power adjustment
4. Precise airflow adjustment valve
5. 4ml capacity, easy top filling
6. Improved pod bottom structure
7. Pro-FOCS flavor adjustment technology
8. Independently controlled Twin-Coil
9. Fit for Meshed-H 0.8Ω/0.4Ω CROWN M Twin-coil (MTL & DTL)
10. Equipped with spare 0.6Ω coil in the package for RDL vaping
11. Unique and transparent outer case design




Lost Vape Ursa Baby Pro Kit

Ursa Baby Pro Kit is a top-tier level pod system featuring 25W max power, 900mAh battery capacity, which make it not only support all MTL to Loose MTL vaping, but also RL range. Equipped with upgraded Ursa Cartridge that features 50% longer coil lifespan and 50% stronger flavor boost, you can enjoy the refreshing vaping at a whole new level across pod system device. What's more, Ursa Baby Pro is compatible with salt/freebase to cover the salt nic & freebase users. Ursa Baby Pro Kit is made by rock solid zinc alloy for high resistance and hardness, highly durable and precise, it also has sleek & modern appearance.

Details:
1. Rock solid zinc alloy, max 25W
2. With upgraded Ursa cartridge
3. Compatible with salt/freebase
4. Supports all MTL to loose MTL & RL
5. Safety protections: Short-circuit/Weak Battery/Over Head Protection

Geekvape B100(Aegis boost pro 2) kit proudly presents the new Aegis Boost Pro, a brand new tri-proof boost pro. The new P-Series coils have an amazing lifespan. Double the time, double the fun!

Parameters
Dimension: W:31.65mm*L: 43.73mm*H:121.21mm
Output Power: 5W-100W
Battery Specification: Single External 18650 battery (Not Included)
Pod Capacity: 4.5ml
Charging Port: Type-C
Display Screen: 0.96 inch curved screen
Operating Temperature: 0°C~45°C
Storage Temperature: -20°C~60°C
Relative Humidity: 45%RH-75%RH
Cooling Mode: Natural Cooling

The GeekVape Aegis Boost Pro B100 21700 Kit is the newest boost style mod in Geekvape's Boost range. The Geekvape B100 Pod Mod Kit is powered by a single 18650/21700 battery with a maximum output of 100W.

Geekvape B100 pod cartridge has an IP67 waterproof and dustproof rating, equipped with a 0.96-inch TFT color screen, which can clearly display vaping data.

Geekvape B100 6ml large-capacity side filling design, suitable for Geekvape P series e-juice. Geekvape B100 adopts an upgraded version of Gen 2 three-inlet air control, which has a better taste.

Other kits you may prefer:
aegis vape
flum vape flavors

Belgian Waffles with Cream and Golden Syrup

MB Classic Belgian Waffle 2%
SSA Soft Waffle 2%
SSA Waffle with Butter 1.5%
WF Vanilla Cream Extra 1.5%
INW Shisha Vanilla 1%
FLV Cream 1%
FA Golden Syrup 1%

Suggested steep time: 4 weeks. Creams and bakery flavors dictate that. The mix needs time for the flavors to become miscible. Naturally, YMMV. It's good off the shake but given time it blossoms.

This mix takes my previously posted Belgian waffle recipe to a new level. The previous one is a good Belgian waffle mix as a base to build upon. It's also a totally different tasting waffle profile. Many of my notes and tips from that recipe are applicable to this new one.

I've been working on creating a decent tasting waffle profile since this last July. Waffle is not easy. Why? On their own each of the waffle flavors was lacking something the other had and did well. Each on it's own offered a rather light tasting waffle flavor that was very easily overtaken by other flavors.

So began my quest to combine them for a tasty and convincing waffle that would hold its own with other flavors. Many combinations were tried and tested. Getting the percentages just right took time.

With this recipe you will get waffle up front, a very mild tasting butter, creaminess in the middle-to-back and a very light tasting, but soooo pleasing, golden syrup on the backside.

MB CBW, SSA SW and SSA WwB combined taste much like a high-end restaurant quality waffle. Easily.

I wanted a silky smooth cream topping that would not detract from the waffle flavor. WF VCE, INW SV and FLV Cream combined delivered that requirement nicely.

FA Golden Syrup is one of Flavour Art's newly released flavors. And ---WOW--- FA did an awesome job with their golden syrup!!!

FA Golden Syrup is not at all sweet like FA Maple Syrup. FA GS, at 1%, has a level of sweetness that I would call a light kind of sweet. It's very pleasing at 1% and not in your face. In this mix the GS isn't experienced until the exhale (backside). As a flavor I would rate FA GS above VTA Golden Syrup. Both are excellent tasting syrups.

What is proper Golden Syrup?

A true golden syrup is unlike any American made syrup. A golden syrup is a thick smooth golden-colored syrup made from cane sugar that has a unique buttery scent and a light caramel flavor. It’s less sweet than, say, corn syrup. It's also called light treacle. Golden syrup ingredients are a simple combination of sugar, water, and a slice of lemon.

Golden Syrup is popular in the UK and elsewhere in the world. Tate and Lyle’s Golden Syrup is the best tasting GS that I know of (Amazon, Trader Joe's, Whole Foods, Wegmanns).

At 1% I do not detect butter or caramel in FA GS. Perhaps SFT'ed or used at higher percentages those notes might reveal themselves. I would use FA GS where I am looking for a more neutral tasting syrup versus a maple syrup - with ummm, it's maple taste.

Okay then...

As is, it's a good and tasty vape. A fruit or two could easily be added to this recipe without mucking things up. Although that depends on the fruit(s) and percentages used. I would recommend going with a lighter touch percentage-wise. I've made this with pineapple/mango, then oranges and finally strawberries.

Prizes:
3*VOOPOO Doric Q Kit
3*VOOPOO Doric 20 SE Kit


We'll have 6 Winners.
The first 3 winners will get the VOOPOO Doric Q Kit,
the second 3 winners will get the VOOPOO Doric 20 SE Kit.

All the entries are optional.
Enter here

Hello friends,

I watched a lot of videos but no matter what I did, I couldn't use it. I wrap the wire, put on the cotton, wet it, fire it, no problem. Then I close the tank and fill the liquid from the top cover, I wait 5-10 minutes later, when I try to steam, the liquid bubbles like boiling, a plastic taste comes to my mouth, the liquid is spitting out. I'm using the default 0.8mm air pin inside, what do you think is wrong? I use Cotton Bacon Prime as cotton.

Can someone help me please?

Aroma King various small-puff disposable cigarettes have always been very popular among e-cigarette enthusiasts, and this CBD product recently launched is also the same. Aroma King mama huana cbd disposable vape is very suitable for your use both in appearance and configuration.

The overall design of this disposable vape is as slender and thin as a pen. The ultra-lightweight and ultra-small size allow you to easily grasp and carry it. The shell is made of brilliant colours to form a kaleidoscope-like pattern, layered on top of each other, which is very individual and psychedelic. The cigarette holder on the top is exquisitely designed and fits the lip line, which will bring you a comfortable feeling.

If you love fruity vapes, then you must not miss this mama huana cbd disposable vape. It has as many as 11 different flavours, mainly fruity. Each flavour has been carefully blended through numerous experiments by aroma king's research and development department, aiming to bring you the most psychedelic and wonderful vape flavour. The battery capacity is 550 mAh, and there is no need for a tedious charging process after the power is exhausted, you can directly discard it for a new one. This is the biggest advantage of disposable cigarettes.

Its e-liquid content is 2ml. As a disposable vaping product, 2ml of e-liquid can provide you with 700 puffs. While meeting your smoking needs, it can also reduce the total weight of the device and save you carrying a burden. Its e-liquid does not contain nicotine but contains 250 mg of CBD, which is suitable for both novice and veteran users.

Our online vape shop uk has carefully prepared more high-quality vape products, and I hope you will like them.

We would also like to recommend for you:
cheap r and m 9000 puffs
best ak5500 vape

The OXVA Xlim SQ has a square shape and adorned lanyard so it's in your pocket, in your hand, or around your neck wherever you need it. OXVA Xlim SQ is powered by a 900mAh built-in battery with a maximum output of 25W, which can be charged to 80% in less than 30 minutes.

Parameters
Brand: OXVA vape
Unit: 1 Set
Material: Aluminum Alloy+PCTG
Dimension: 14.0*47.0*68.5mm
Colors: Arctic Ice, Gold Blue, Pink Green, Purple Black, Light Blue, Gold, Pink, Black
Battery: Built-in 900mAh
Output Power: 5W-25W

Fully compatible with 2ml Xlim vape Pods, it provides the ultimate flavor for free base and nicotine salts. The OXVA XLIM SQ KIT is OXVA's newest kit combining flexibility and quality. This tiny device only needs to draw air to draw, and the 25W output just goes to show that small things always come in small packages.

The device's leak-proof body means that gone are the days of e-liquid spills. This kit is compatible with OXVA XLIM V2 CARTRIDGES, with a choice of 0.6Ω or 0.8Ω coils, so you can change it as needed. The kit can be charged to 80% in less than half an hour, making it easy to use all day long!

Related vape devices we recommend:
OXVA Xlim V2 Pod Cartridge
Digiflavor Drop RDA V2

LTQ Vapor Water Pipe will take your proxy sessions to a higher level. Made from thick borosilicate glass, this recycled glass features extra filtration and unique side design for strength and ergonomics. The piece also features a flat base for fixed poses and curved chambers for the smoothest clouds.

what is the best online vape shop offers LTQ Vapor Water Pipe as the main glass range in stores. Made of borosilicate glass, LTQ Vapor supplies a wide range of glass products, from vaping sticks and carburetor caps to hand smoke and shisha.

Easy To Carry And Use
1. Open the mouthpiece and add water
2. Close the mouthpiece, enjoy it
3. Just put it in your pocket and you can take it anywhere

Lighter And Smaller
It's small in size, 169mm high and 45mm wide. It weighs only 70g.

Size: 40mm*45mm*169mm
Material: PC+ABS+Zinc alloy
Weight: 70G
Colors: Blue, Black, Green



Recommended products:

Hello everyone, what I want to introduce to you today is a nectar collector, ltq vapor nectar collector, it is not difficult to see from its appearance that it includes a quartz tube heating rod, a main chamber with a percolator and a mouthpiece for easy inhalation. The overall material is PC, ABS, POM and borosilicate glass, safe and practical.

The mouthpiece is detachable so you can easily fill through the top, you need to be careful not to overfill the fixed water line or it will cause the unit to malfunction. You can collect wax through the quartz tube heating rod at the bottom, and the spray gun heating rod can fully volatilize the substance, bringing you the ideal clouds and taste.

Nectar Collector is relatively small overall, so there is no burden to put it in your pocket. Perhaps such a new gadget is worth trying. Do you know where can buy best vapes, I think you should be able to find out.

I would like to show you something more:
caliburn x price
buy caliburn a3

Proudly introducing the new Aegis Boost Pro, a new tri-proof boost-up pro. New P Series coil for mind-blowing usage lifespan. Double time, double fun!



Output Power: 5W-100W
Battery Specification: Single External 18650 battery
Pod Capacity: 4.5ml
Charging Port: Type-C
Display Screen: 0.96 inch curved screen
Operating Temperature: 0C - 45C
Storage Temperature: -20C - 60C
Relative Humidity: 45%RH - 75%RH
Cooling Mode: Natural Cooling
...

Click here for more:

B100 (Boost Pro 2) Kit: https://www.healthcabin.net/geekvape-b100-18650-pod-mod-kit-p/28882.html

This thread is for the general discussion of the product GEEKVAPE B100 Kit (Aegis Boost Pro 2)：New Tri-Proof. New Boost Pro. Please add to the discussion here.

Howdy ECF Brothers & Sisters! Been awhile I know so I figured (when started lookin around again after a long hiatus) I best come in with an Amazing Offering to make up for my absence... So without further ado for your viewing pleasure & consideration;

Selling one of my bought-New Authentic Mated SbS Rigs: a TEK Division Horizon EVO & Taifun GT IV in both 2ml & 4ml Configs w/Taifun Small Triple Window SS Tank Cover.

Horizon EVO:
Bought in Jan 2021 directly from TEK Div in Italy within minutes of them Listing it on their Weekly "Now Available" Listings. It is the DNA60 in both Blue Screen & Button Halo. Comes with Card of Authenticity & in its orig. TEK hard-Case. Absoutely ZERO issues or glitches in its operation, performance or aesthetics. As pics show it is in like-new condition all around with no scarring on the 510 Plate. ALWAYS used a thin foam disc on to it from day one between the Plate and the Taifun GT IV it was mated to to prevent scratching and to insure no liquid EVER got anywhere near the 510 connection (thnx for that advice & direction DPL). Had the GT IV and the same LG HG2 Batt mated to it since day one & NEVER charged thru the mini-USB. I did use eScribe once to set the Board Settings up like I prefer & to put a custom 2nd Start-Up Screen on it ("Horivon EVO" w/Punisher Skulls to left & right of words).
Mod has an Cool-as-#3LL adjustable Top Body Block opposite the Atty/Tank so you can move it up or down to match the height and keep the Rig Level, Clean, & Neat looking regardless of what you put on it. Can accept up to a 25mm Tank and personally put a KayFun 5sq on it just to see if would fit and It Did.
These are running @ $325-$350 U.S. plus when & IF you can even find them. Add the current sorry state of Vape Commerce affairs and this High-End rarity is few & far between. I think I ended up around the $400 mark once all said & done to the gates of Ft. Vape.
This Needle in the Vape Haystack can be yours for only $260 (I outa be ashamed of myself at that) which includes USPS Priority Shipping.
*No Battery included

Taifun GT IV:
Bought this Authentic Taifun in Jan 2021 when scarce after 1st hit the Market from either Creme de Vape or Enushi (gettin old, hit my head few too many times & memory of that tad foggy). At time the only ones in stock were the TPD 2ml version so got the spare 4ml Chimney and the Ltd Edit. Taifun Small Triple Window Tank Cover. Been in the 4ml config since 1st built & loaded. Am including the 2ml Chimney in sale (why, I don't know...). Totally cleaned & dried and ready for your Build & Juice. Comes in orig Taifun Tube w/all docs, Bag o Spares (O-rings, Term Screws, Allen Key) and the OEM Drip Tip that was never used or touched human lips.
As seen in pics, absolutely no scarring, scratches, or issues aesthetic or internal Comps.
These are running around $175 U.S. IF you can still find 'em or get them shipped in the States if ya do find one. The Triple Window Shield is an extra $35 and not even gonna try and bump for the 4ml Chimney. So call it around $200 New if can find or get one (see above mentioned pitiful state we in here in the "Land of the Free"--my achin @$$).
Lets call the Ball for this GT IV at a likewise low-ball $120 U.S. includes USPS Priority Shipping.

Pkg Steal ofa Deal:
Take 'em BOTH together and I'll gut the above to an incredible mind-blowing inconceivable should be Criminal mere $320 (musta lost what little damn mind I got left I tell ya what...).

Anyways, as always with my Awesome Gear for Awesome Deals Listings;
NO "Holds". 1st Dibs w/Cash on my PayPal Barrel-Head gets it. I will take Back-Up 2nd Dibs and so on.
Payment via PayPal ONLY
Shipping (USPS Priority w/Tracking) included to Lower U.S. 48 ONLY
Want more than the included $100 USPS Insurance: YOU pay for it.
I Ship QUICKLY (usually within 24hrs) after received & confirmed PayPal Pmt

Questions welcome and PLEASE check my Feedback to be confident & assured in my Gear & the Descriptions in this Listing.

In case ya wondering why is this Idjit selling these given the Vape Gear situation in the "Home of the Bereaved"? Not "Easy" I assure you but I got some other SbS's & High-Enders to console me AND kinda want some cabbage to complete the funding of another "Special Something" I got my eyes & heart set on for another piece of Equip to satisfy another of my "Sporting & Personal Security Proclivities & Collections"....

Thanks for looking & considering!

Battery Charging: Type C 5V/1A (fully charged with 50 minutes)

++ Pros ++
→ Very small/petite/compact
→ Pocket/purse friendly
→ Ultra lightweight
→ Great build quality for plastic
→ Great flavor output
→ Wicking keeps up/no burnt puffs
→ Very visible juice levels
→ USB Type-C charging port (picks up QC 3.0 cable and allows pass-through vaping)
→ Anti-leaking design appears to be working well
→ Comfortable driptip


-- Cons --
→ No battery level indication until it's dead
→ USB Type-C port only charges at a tested 0.6A vs. the advertised 1.0A
→ Refill port is small making the refilling process messy

+- Preferential Considerations -+
→ Entire ITO cartridge must be tossed out when the coil dies
→ Not a "true" MTL; more akin to a loose MTL unless the airflow inlet is plugged
→ Semi-adjustable airflow using thumb or finger
→ A very bare bones kit
→ Non-removeable driptip
→ It's entirely made of plastic



Overall Rating & Final Thoughts
8.5-9.0

For what it is, the Doric Q vapes quite well. Other than a few hitches like the loose MTL airflow, slower than advertised charging speed, primitive/lacking battery life indicators, no spare pod or coil, and no Type-C charging cable, the Doric Q gets good marks. Do I think this product would successfully help you switch over from cigarettes? Yes. The flavor output alone I'm getting from the ITO cartridge and the fact that the device has yet to leak are both huge bonuses that aid in overcoming its shortfalls.

You can check out the Doric Q at VooPoo's page, find the compatible pods here and the coils here, and purchase the Doric Q Pod Kit here.

I want to thank you, the reader, for sticking through with me till the end of another one of my reviews. I hope I've helped inform you about the Doric Q enough to help you in your decision-making process. I wish you all a wonderful start to 2023 - let's help keep vaping alive!

Cheers, and happy vape hoarding!

Mexican Cartel Fruits Rouges Cassis Framboise
I chose a promising blend of raspberries, blackcurrants and red fruits from the French producer for today's test, which I hope will deliver the flavours I was hoping for.I blended it at 10%, the manufacturer's recommended blend is 12%, which in hindsight turns out to be a sweet under-mix. So 10% didn't give anything to write home about, so I ended up with 15%, which did deliver the flavours. The picture on the bottle says it contains a cooling agent, but I refute that. There is no noticeable menthol in it as well as cooling. The scent is a blend of subtle fruits, from which you cannot determine the scent of the fruits given. Okay, here's the taste. Blackcurrant, like blueberries in it, but I don't detect any other red fruits. Although they are not red fruits either, but maybe they misspelled the description . The taste is sweet, a bit tart and has a dry effect. But where are the raspberries and other red fruits? The pungent and slightly tart flavour of blackcurrant completely overpowers any other fruit, if there is any. There's a lot of inconsistency in the aroma, which makes it not a "red fruit" but rather a berry forest fruit effect for me. In this case, Mexican Kartel has certainly fooled us, but I wouldn't pull any punches . And then there's the big "But" at the end, which is entirely appropriate for a sweet blackcurrant jam, and could even be a favourite in many fruit flavour steamer circles.

Hi everyone, my name is Agus and I am from Indonesia. I started vaping back in 2014. I really enjoy trying out new flavors and devices, and I am always looking to learn more about the latest trends and innovations in the world of vaping. I am excited to be a part of this forum with all of you. Let's make some clouds together!

Hello, today let's take a look at the Hazard RTA by Across Vape sent to me for this test by Dovpo. In this Test I will examine each of the characteristics that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Hazard RTA by Across Vape; Before starting, let's see together some special features indicated by the manufacturer:
1. The internal RBA can be disassembled and used on various systems
2. The RBA Base is suitable for Billet type Boro Style Tanks
3. Hazard RTA is compatible with most BB Bridges as long as they don't exceed 20mm in diameter!
4. Kit consists of RBA and RTA atomizer
5. Easy airflow adjustment
6. Easy to build
7. Unique room design
8. Accurate atomization space for reliable MTL & RDL vaping
9. Highly adaptable and configurable
10. Protected side top fill system



► Hazard RTA by Across Vape; Packaging:
The transparent ice crystal pack style allows you to view part of the contents, this surface features the "Across" logo and the inscription "Hazard RTA". On the back under the "Across" logo are; the address of Shenzhen Dovpo Technology, the barcode, color indication (SS), scratch & Check, QR-Code, trademarks and logos. On the side there are the main social icons and the wording "Designed By Across Manufactured By Dovpo".





► Hazard RTA by Across Vape; Packing List:
• 1 Dovpo x Across Vape Hazard 24mm RTA
• 2 pre-built coils
• 4 Airflow calibrated pins
• 1 Set of spare screws
• 1 Set of spare O-rings
• 1 Set of caps
• 1 User Manual





► Hazard RTA by Across Vape; Specifications:
• Dimensions: 24mm x 45mm
• Eliquid capacity: 4ml
• Deck Type: Single Coil
• Construction material: 303 stainless steel
• Recommended resistance range: 0.8Ω/0.5Ω
• Insulator: German PEEK
• Thread: 510
• Type of filling: Upper side
• Type of vaporizer: MTL/RDL
• Interchangeable air pins
• Double slotted bottom airflow
• Available colors: Gunmetal, SS.



► Hazard RTA by Across Vape; First Impressions:
The idea is certainly brilliant and consists in making the various Bridge RBA compatible with an RTA type tank equipped with 510 thread to be adaptable to any Box Mod. Hazard RTA with an external diameter of 24 mm can in fact internally accommodate any BB Bridge RBA that does not exceed 20mm in diameter! Hazard RTA is made by Dovpo in stainless steel (SS) 303 with a polycarbonate (PC) tank having a capacity of 4ml depending on the base that will be inserted inside. The drip Tip is not present and this configuration gives you two choices; vape directly through the metal chimney or install your favorite 510 drip-tip to better insulate your lips from the heat.



The RBA base inside the package takes up the design of the gas mask so dear to the brand, this module is compatible not only with Hazard RTA, but also with any other Boro Tank to be inserted in the Billet Box! Hazard RBA is rebuildable in single coil and the rebuildable base is accessible by removing the two side caps. Dovpo and Across Vape supply two prefabricated coils ready for assembly, two slits are made in the structure for the e-liquid to flow towards the coil and through the cotton. The other parts include an extended chimney to be inserted onto the RBA, and a threaded bottom which will be screwed into the chosen Mod once the Hazard RTA + Hazard RBA structure is complete.





Starting to compose the parts of Hazard RTA and Hazard RBA together, I noticed very good mechanical processing tolerances, with sliding threads, and good quality o-rings. The legs of the coils are effectively stopped by the cross screws and the side feet. After tightening the screws be precise when cutting the legs to avoid contact with the metal of the dome/chimney. This RBA has the particularity of having double threaded holes on the posts, so it doesn't matter how you wind your coils if clockwise or counterclockwise, just change the hole and move the screw.



After inserting the cotton in the coil you can adjust by cutting the two flush ends of the terminal parts of the metal channels, then you can insert the metal cover and join the parts with the two white Peek caps and then insert the RBA base in the Hazard RTA.



The top cap of Hazard RTA shows the stylized Across Vape logo, the top cap is free to rotate above a large red O-ring, by pulling the top cap upwards you have access to the side charging port which is protected by a red silicone rubber. I find this filling system intelligent in its simplicity, it is also quite quick and effective to insert the approximately 4ml of e-liquid inside the tank, you can tilt the Hazard RTA slightly so as not to drip outside.



Thanks to a rotating ring equipped with end stops, the Hazard RTA offers a standard adjustment of the lower air inlets, moreover for a precise regulation of the airflow, there are five different airpins in the package. I really liked the replacement of the pins, just unscrew the RTA base and unscrew the old pin and screw the new pin with tweezers, everything is really simple and fast.

• AFC pin diameter 1mm
• AFC pin diameter 1.5mm
• AFC pin diameter 2mm
• AFC pin diameter 2.5mm
• 3mm diameter AFC pin (pre-installed).





► Hazard RTA by Across Vape; Vaping Test & Final Conclusions:
Dovpo & Across Vape recommend a resistance range between 0.8Ω and 0.5Ω, so I installed one of the two resistances (2.5mm diameter) included in the kit, however the space available also allows you to use coils with an internal diameter of 3mm. With the coil I used I found a resistive value of 0.7Ω. The liquid I chose for this test was TOB Hypnos diluted 10% in a 50:50 VG/PG base with 3mg/ml of boost. By almost completely closing the two AFC slots on the base, adopting a 510 resin drip-tip specific for MTL/RDL, and with the pre-installed 3mm air-pin I obtained a right RDL contrast. I also tried the remaining airpins and found my ideal setup with the 1.5mm one. With the 1.5mm pin the RDL puff is well calibrated, even keeping the two lower slots completely open. By closing the lower slots to about 1/3 of their total opening, a MTL restricted puff, with hot steam and with a great perception of nicotine is obtained at 18w of power. To lighten the nicotine load on your throat, just open the airflow slightly. I really like this "aggressive MTL" configuration, the perceived flavor is high, the cotton feed is constant and without any dry hits. Hazard RTA is crackling like wood on the fire, slightly noisy in suction, but not annoying. The finishes and the assembly are really good, the only precaution concerns the polycarbonate tank which is threaded, therefore delicate and you could damage it if you screw it wrong, take a little patience in performing this operation. I would have preferred the presence of a driptip in the kit, yes it is true to vape a driptip is not necessary, but I have noticed that without the driptip the fireplace can get a little too hot in contact with the lips. The recessed position of the AFC ring is not the best of comfort, if the adjustment ring had been flush with the tank it would certainly have been easier to rotate, all in all nothing serious on this aspect either. For the rest I confirm my positive impressions, and I think that Hazard RTA + Hazard RBA are really a well thought out, simple and versatile system. Hazard RTA by Across Vape really represents everything that lovers of this kind of accessories craved.

Thank you Dovpo for sending me Hazard RTA by Across Vape.

Thanks for reading.

Dear friends，
Please click Here to check the Winner Announcement of Eleaf Christmas Blind Box & Eleaf ANNUAL SUPERDRAW！
Congratulations to all the winners and thanks for sharing your wonderful Christmas moment with Eleaf Products.

Friends who love e-cigarettes, have you noticed that many new vape products have been launched recently, are they all tricky? Today, let's take a look at this newly launched small and light oxva xlim sq pod kit. I believe it will impress you with its novel and beautiful appearance and good vape performance.

This pod kit is used with OXVA Xlim C empty pod cartridge. The material of the cigarette holder is PCTG, which is convenient for you to observe. At the same time, the cigarette holder is designed to closely fit the curve of the lips, which is ergonomic and comfortable to use. When you need more slippery e-liquid, you can refill it from the side, and the excellent leak-proof design can keep you from worrying about oil leakage. You can use it with 0.6ohm, 0.8ohm or 1.2ohm coils for MTL vaping and RDL vaping.

It has 4 fresh and vibrant solid colours and 4 different premium gradient colours for you to choose from. The sturdy and durable aluminium alloy material can prolong the service life of the device, making these colours more eye-catching and textured, and can effectively prevent slipping and fingerprint residue. The compact and lightweight body is not only very cute but also comes with a lanyard for you to carry easily.

Despite its small size, its built-in 900mAh battery can still provide you with enough battery life. And it also supports type-c charging, the charging speed is very fast, it can charge 80% of the power within 30 minutes, and can continue to provide you with vape services. It is worth mentioning that it has a smart indicator light on the shell, which can be more convenient for you to control.

More new products are available in our vapes for sale, you are welcome to choose.

You might also like：
cheap vaporesso xros 3 mini
caliburn x 3ml uk hot sale