Once again welcome back for my review of the brother of the GALEX Pod device called the GALEX NANO, The two are almost identical in features but the Nano has a few that it's brother the GALEX doesn't have. Both share the LED light features if you choose to engage them as well as Pod and coils and both are auto-draw only with a 800mAh internal battery housed in both but that's it. The NANO has 3 power levels you can adjust while it's brother's wattage/voltage is adjusted automatically based on the coil being used. There are 2 airflow holes on the GALEX but only 1 on the NANO, more about that in my review. This device is called NANO for a reason, lets check it out.




COLOR CHOICES

IN THE BOX


* 1pc Galex Nano Kit

* 1pc GX Mesh Coil 0.8ohm

* 1pc GX Mesh Coil 1.0ohm

* 1pc Warning Card

* 1pc Warranty Card

* 1pc User Manual

* 1pc USB Type-C Cable

* 1pc Desiccant

FEATURES


* Battery Capacity: Built-in 800mAh Battery

* Output Wattage: 11W-22W

* 3 Level Adjustable Output

* Output Voltage: 3.3V-3.5V-4.2V

* Type-C USB Port

* Full Spectrum Vaping

* Child Resistant

* FM SaltCoilTech 4.0 technology

* Quenched SS904L Mesh

* Pod Capacity: 2ml

* Compatible with GX Mesh Coil

SPECIFICATIONS

GX MESH COILS ARE COMPATIBLE WITH ALL GALEX PRODUCTS

FM SALTCOIL TECH 4.0 WITH 50% MORE TEA FIBER COTTON

SS 904L MESH

MAZE CHIMNEY DESIGN

coil for dragon priv n19 kit 0.4 or 0.5 ohm ... are there any replacements and is it possible to get a stronger coil than 0.6 0.8 ohm for this model?

Hi ECF,

Happy weekend! We have got some good news for you, today we are excited to annouce that our newest INNOBAR C1 is going to launch today. The INNOBAR C1 Kit integrates revolutionary Aquios water-based vaping technology into a pre-filled pod system. Each 2ml pod is designed to last for 600 puffs and the INNOBAR C1 Pod Kit battery provides constant 3.6V output for a consistent vaping experience throughout each charge cycle.



Features:
· 600 Puffs Prefilled Pods
· Aquios 30% Water-based E-liquids
· 10 Flavours Available
· 1.1ohm Kanthal Mesh Coil
· 2% Nicotine
· 450mAh Re-chargeable Battery
· Constant Voltage 3.6v Output

Aquios water-based vaping technology
The INNOBAR C1 Pod is equipped with Aquios water-based vaping technology. This delivers smoother vapour, faster satisfaction, and unmatched flavour clarity. A vaping experience like no other.



Move on from disposables
The INNOBAR C1 Pod delivers industry-leading performance and convenience, at a far lower price than disposable vapes. You only need to replace the pod when it’s depleted, reducing the cost of vaping and your impact on the environment.



Performance mesh coil
Our advanced 1.1Ω mesh coil design produces incredible flavour and vapour, while optimising battery life, maximizing the time between charges.



Constant output
The INNOBAR C1 uses 3.6V constant output, giving you a consistent vaping experience from the first puff, right until it’s time to recharge.



10 incredible flavours
Water-based flavours are unlike anything you’ve vaped before, with enhanced depth and clarity. Experience a huge spectrum of flavour, from bold Pink Lemonade to rich Jungle Juice.



To learn more, please visit: INNOBAR C1 - Disposable Vape | INNOKIN®

Best regards,
Innokin Team

A short while back I won a contest where the prize from VooPoo was the drag H80S pod mod kit. I received it in a very timely fashion and while I see there are other reviews I think they are more formal reviews I just want to go over how I feel about the prize that I won without getting too far into the technicals as the formal reviewers have covered that.

The thing that interests me the most about this device is that VooPoo has once again decided to release a device that will accommodate a seriously large line of their previous coils. I cannot stress how important that is to me as a consumer. There are so many devices that I really wanted but because they came out with a new coil line and we're producing so many products with new coils that were non-compatible with one another I don't want to invest in a product and then a year later have the coil no longer available. I appreciate the fact that VooPoo almost always strives to include as many different coil options as possible.

I started out by trying the original PNP coils and they fit wonderfully. Then I moved on to the RBA because I consider an RBA to be a mandate if I'm going to use a company's kit. And the RBA fits perfectly. I'm fairly confident in my building and there has been no leaking.

The refilling of the pod is quite nice. It is a top fill pod. The top cap has a very simple one turn back type latch so you just move it slightly counterclockwise to open it up and take it off and then you refill through their gasketed entry points that will fit the vast majority of different vape juice bottles or droppers. Then you simply put the top cap back on and turn it clockwise and it locks into place. Because these are a plastic material it was very smart in my opinion for VP to not make it a full screw on but rather just a little locking device. With time repeated screwing on and off of a cap could wear out the threading and they are going to avoid this the way they did it. The tank I believe holds 4.5 ml which is significant for a mod that is a single 18650 that goes up to 80 watts.

The mod itself has a very nice feel to it. It's got a good heft while not being heavy. It fits comfortably in your hand the power button is intuitive and nice and clicky. And the design of how they did the airflow is rather unique. The pod sets in an attractive looking area where the air flow is two-sided and on the bottom and then they've got a little cut out design that allows you to see the bottom of your pod and also just looks regal. You turn the entire tank to open and close the airflow. And you do have the option of making it one-sided if you wish on either side but I prefer the balance feel.

What they did particularly well that can be a pitfall for many of these pod mods the air flow is not in a location where your fingers would naturally go and cover it up. So you're not having to adjust your grip in order to not reduce the air flow with your fingers accidentally. That's very nice because so many different pod systems put the airflow in a place where your fingers naturally want to go. Whether you are a thumb fire or an index finger fire you will not have any issue.

The screen is bright and intuitive with a push of both the up and down buttons bringing you to your menu. I believe it is the gene TT 2.0 chip. And the battery cover is I think they call a c shape cover I believe. It's one of the ones where you pull the entire cover off and it's magnetized with a very strong magnet and then you place the battery in and the battery cover goes back on rather than something you have to screw unscrew or stick your finger in to try to get the latch open this is probably my favorite method of battery containment. I don't want to break a nail trying to put my battery in lol.

Overall I think that this is a product worth getting. Especially if you already enjoy any of the PNP coils. This takes so many different coils. And these are some of the most popular coils out there that are likely to be found in people's local shops in the US. That is very important right now with the situation concerning mailing of vape devices. You want a company and a device that is going to give you as many choices as possible for the coil. This is truly something that you can purchase and know that coils will be available for many many years to come. I would recommend this product. It's got a few new neat things put together good feel I think it's a very attractive device. It feels like it's quality but it's not too heavy. The pod is interesting seems like it would be a tough thing to break since it's protected by the mod it's almost as though it's holding it like a side-by-side mod would.

It's just a very attractive design a very well thought out product and a respectful company that isn't trying to nickel dime us to death with having to purchase all new coils for every new device that we get. Therefore they are allowing us to purchase a new device without having to commit to a brand new coil series that may only be around for a year. However you still can use the coils that most recently came out with this device. So you have the best of both worlds.

There was only one thing that I would change and it doesn't actually have to do with this device. I think that it is time for VooPoo to create and release a new RBA that is compatible with all of these devices. The one that they have now is usable but it is small and a little bit awkward in the way that your cotton tails have to go. I feel like they could make a product a little bit easier to use for everyone. I know it has to be small to be compatible with all of these devices and there are limitations to what can be done but I think that they could improve upon their RBA. But that is all!

Hi, Vaporesso has released an important update for Luxe X, these are new XR cartridges with replaceable GTX coils, but also a new "X" cartridge with integrated 0.6Ω coils. This update is called LUXE XR. Since it is almost exclusively a cartridge update, this new review may be repetitive, however for the right follow-up I have considered and deemed it appropriate to resume some parts of my previous review: LUXE X and report here my considerations with the appropriate updates.

In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.



► Vaporesso Luxe XR Pod Kit; Before starting let's see together some special features indicated by the manufacturer:
• AXON chip
• Powered by an internal 1500mAh battery
• Maximum power 40W
• Leak proof SSS technology
• Corex technology to enhance flavor
• Fast charging of Type-C
• Compatible with Luxe X Disposable Pod; 04Ω / 06Ω / 08Ω
• Compatible with Coil GTX 0.4Ω / 0.6Ω (For Pod XR RDL), Coils GTX 0.8Ω / 1.2Ω (For Pod XR MTL)



► Vaporesso Luxe XR Pod Kit; Packaging:
The black / green cardboard packaging shows on the front; the logo, the new brand of the manufacturer, the warnings and logically the name and image of this device. On the back of the package there are; the specifications, the packing list, a bar code, the color of this Sample (Silver), some warnings and the whole series of logos / trademarks required by law. From the side you can see; some main features, a hologram and the Scrath & Check for anti-counterfeiting control.





► Vaporesso Luxe XR Pod Kit; Packing List:
• 1 * Mod Vaporesso Luxe X
• 1 * Pod Vaporesso Luxe XR (RDL)
• 1 * Pod Vaporesso Luxe XR (MTL)
• 1 * Mesh Coil Vaporesso GTX 0.4Ω
• 1 * Mesh Coil Vaporesso GTX 0.8Ω
• 1 * Type-C Cable
• 1 * User Manual
• 1 * Warranty Card
• 1 * Reminder Card



► Vaporesso Luxe XR Pod Kit; Specifications:
Product size: 98 * 31.5 * 21.6mm
Battery: Integrated 1500mAh
Output power: 40W
Charging Current: DC 5V / 1.5A,
Pod capacity: 5ml
Suitable for: 0.4Ω / 0.6Ω / 0.8Ω Luxe X Pod
Suitable for: GTX 0.4Ω / 0.6Ω Coils (For Pod XR RDL), GTX Coils 0.8Ω / 1.2Ω (For Pod XR MTL)



► Vaporesso Luxe XR Pod Kit; Available colours:
• Black
• Blue
• Green
• Gray
• Purple
• Red
• Silver



► Vaporesso Luxe XR Pod Kit; how it is made:
The vaping mode provided is entrusted solely to the button and the refillable cartridges can be both 2ml and 5ml, depending on the LUXE X (XR) cartridges you purchase. On the front panel, the transparent part clearly highlights the chipset and the black gradient running down the facade gives LUXE X (XR) a remarkable "Sex Appeal". Below on the dark part, you will also find the LED with 3 signal lights for an excellent visual contrast during its lighting. At the top on the perimeter of the body of the Mod there is a sturdy metal band, just over 2cm high which houses the protruding Fire key on the front side and well sized to be comfortably reached by the fingers. On the rear panel there is the new Vaporesso logo, engraved directly on the metal. Below you find the name "Luxe".

► Vaporesso Luxe XR Pod Kit; Operation Guide:
● These are the Vaping and LED monitoring operations of this device. I hope the following pointers can help you understand how this product works. The AXON chip automatically detects the resistance of the coil introduced, then automatically and in the best way adjusts the output power for each cartridge.

• Power On / Off: 5 clicks on Fire-
• The LED shows 3 lights on when the charge level is between 60 and 100%
• The LED shows 2 lights on when the charge level is between 30 and 60%
• The LED shows 1 light on when the charge level is 30% or less
• During recharging, the battery charge level is shown in real time through the number of lights on.
• Exceeding the 8s limit of uninterrupted vape, the led flashes 3 times and the device switches off to safeguard the life of the resistance.
• Low Resistance Protection: The 3 LED lights flash 5 times and the device switches off.
• Short circuit protection: The 3 LED lights flash 5 times and the device turns off.
• No Load Protection: The circuit does not detect the atomizer, the LED flashes 3 times.
• High resistance protection: The 3 LED lights flash 3 times and the device switches off.
• Low voltage protection: The 3 LED lights flash 3 times and the device turns off.
• Overcharge Protection: Charging when completed stops automatically



► Vaporesso Luxe XR Pod Kit; Airflow Control:
The two narrow sides of LUXE XR show on one side the description of the 1,500mAh internal battery and on the other side you can read "Vaporesso". At the top of the metal band there are two buttonholes, one on each side. The slots have different dimensions and are not externally adjustable, but you can adjust the air flow according to the side with which you will insert the cartridge in the Mod. The only flaw is that there is no reference mark to insert the cartridge in a way rather than the other. Not bad because after taking a shot, a nanosecond of your time is enough to flip the cartridge to the other side.



► Vaporesso Luxe XR Pod Kit; Compartment / pod:
On the bottom of the compartment, you can see 4 round shaped magnets one for each corner, this position of the magnets allows a solid docking of the Pod, in the center there are 3 spring loaded and gold plated pins for better electrical conductivity. Also on the bottom there is a fixed raised pin which has the task of keeping the cartridge steady and stable in combination with the action of the 4 magnets. You can use either the Luxe X disposable cartridges or the new XR cartridges with GTX replaceable coils.

► Vaporesso Luxe XR Pod Kit; Fast charging:
The 5V / 1.5A Type-C charging port is located on the bottom so the device will be lying down while charging. In about 60 minutes, the recharge of the 1,500mAh internal battery will be completed.



► Vaporesso Luxe XR Pod Kit; XR cartridge
The two pods included in the XR kit are labeled MTL and RDL. They look the same but are slightly different. The difference is the size of the extraction hole which is narrower in the cartridge for MTL. Additionally, the MTL cartridge has a smaller airflow hole in the pod base. Apart from the replaceable GTX coils instead of the integrated ones, nothing has changed, even the new XR cartridge has a capacity of 5ml of e-liquid and stands out from the mass of Pods, giving Vaporesso another advantage for choosing a Pod device rather than another. The refill takes place from below through the classic silicone rubber and despite the dark color cartridge, you can easily see the internal level of the e-liquid. The arrangement of the magnets is mirrored to that present in the compartment / pod.



► Vaporesso Luxe XR Pod Kit; Replaceable GTX Coils:
With LUXE XR you will receive two different Mesh Coils both equipped with COREX heating technology just like in the LUXE X Pods, this to provide more accurate flavor and longer shelf life. The GTX coils included in the kit are; 1 Mesh coil of 0.4Ω with range 26-32W for the RDL cartridge and 1 Mesh coil of 0.8Ω with range 12-16W for the MTL cartridge. Keeping in mind the maximum output limit of the Mod is 40W, you can also use the 0.6Ω and 1.2Ω GTX coils as spare parts. So the choice of GTX replaceable coils for MTL or RDL is substantial.



► Vaporesso Luxe XR Pod Kit; New 0.6Ω Disposable Pod:
Together with the updated cartridges for replaceable GTX coils, Vaporesso sent me the new 0.6Ω disposable cartridge. It is a cartridge for RDL that completes the disposable "X" line together with the previous ones of 0.4Ω RDL and 0.8Ω MTL. So currently there are 3 options of "X" cartridges, I remind you that the disposable cartridges are available in blister packs of 2 pieces.





► Vaporesso Luxe XR Pod Kit; Final conclusions:
Lately I've been gaining a lot of familiarity with Pod devices of all kinds, whether they are; refillable, pre-filled, or disposable, of all shapes and from many manufacturers. This happens because Pod systems have invaded the market and companies try to promote these devices by leveraging some features that many vapers seek and are; pocket kits, absolute ease of use, high performance, large battery capacity.

• RDL Mesh Coil GTX 0.4Ω Range 26-32W:
Combined with the XR cartridge for RDL this GTX Mesh Coil allows you to get very high but also very balanced RDL performance from your Luxe Pod and without the steam getting hot! The clouds are dense and impressive and the taste absolutely good, it is no mystery that GTX coils are among the best and most popular on the market today. By rotating the cartridge 180 ° you get a slightly tighter airflow with more throat hit. The puff remains quite "loose" with both settings and the noise during extraction is quite civil. No inconvenience and no condensation while you are chasing clouds with this coil.

• MTL Mesh Coil GTX 0.8Ω Range 12-16W:
Paired with the XR cartridge for MTL this GTX Mesh Coil allows you to tune your Luxe Pod over a pretty wide and satisfying MTL range. The puff remains fluid even in the tightest airflow position, with a dark and quiet sound, lots of HIT and satisfying flavor. By rotating the pod 180 ° you get a smoother puff and greater steam production, the hit in the throat is less but it is well balanced.This cartridge in combination with the GTX coils for MTL I think it will be able to satisfy many vapers.

• New Disposable Mesh Pod LUXE X 0.6Ω:
The application of Corex technology is feels, this Mesh coil offers rapid heating with a high vapor production, especially with the air regulation set to the largest air passage, in this configuration the flow is loose in perfect style RDL. The rotation of the cartridge in the Mod allows you to slightly counter the Puff and increase the perception of hit in the throat (Hit). With this disposable cartridge, vaporization is always fluid and free of spitting and the vapor never gets too hot, the flavor is really concentrated and good comparable to that of an equivalent GTX coil.

Among all the pod mod kits I have tried, this Vaporesso Luxe X (XR) is certainly one of the most beautiful and performing Pod-Mods ever. You will have a great time whether you decide to use it in MTL or RDL with replaceable GTX coils and with disposable cartridges! Vaporesso has thought of everything and provides you with a complete line of disposable cartridges and two different customized cartridges for MTL or RDL that can accommodate your favorite GTX coils.

I would like to thank Danny and Vaporesso for providing me with the kit. I hope this review was helpful for anyone looking to purchase the Luxe (X) XR Pod Kit.
Thanks for reading.

Hello again. I know you’ve been seeing a lot of me lately but that’s because I received several review samples very close together. Today I will be taking a look at the VAPORESSO LUXE XR. Now that might sound familiar since I had recently reviewed the VAPORESSO LUXE X but this one although similar is different and deserves to be taken a look at. In case you missed it, here is the review I did on the LUXE X. VAPORESSO LUXE X KIT review by hittman | E-Cigarette Forum (e-cigarette-forum.com)

The appearance of the Luxe XR is very similar to the Luxe X and the pods are interchangeable. As a matter of fact, I was sent the newer .6 ohm sealed pod along with the Luxe XR sample that I received. When I tested the Luxe X I was very fond of the .4 ohm sealed pod for RDL. When I say sealed pod, I mean that it is not possible to change the coil. The main new feature of the XR is that it is compatible with multiple coils from the GTX series which I have been a big fan of for a long time. The XR has a 1500mah battery built in with a maximum output of 40 watts which restricts it from using some of the lower resistance/ higher wattage GTX coils. The included pod has a 5ml capacity which is very nice for such a small pod device. Even though a lot of the promotional pictures are the same as the ones for the Luxe X, I will go ahead and show them for those that missed the previous review.







WHAT’S IN THE BOX?

1* Vaporesso Luxe X Battery
1* Vaporesso Luxe XR Pod (RDL)
1* Vaporesso Luxe XR Pod (MTL)
1* Vaporesso GTX 0.4Ω Mesh Coil
1* Vaporesso GTX 0.8Ω Mesh Coil
1* Type-C Cable
1* User Manual & Warranty Card
1* Reminder Card

SPECIFICATIONS:

Battery: Built-in 1500mAh battery

Output Power: 40W

Charging Current: DC 5V/1.5A, Type-C

Pod Capacity: 5ml (Standard)

Filling: Bottom filling

Coil Resistance: GTX 0.4Ω Mesh Coil, GTX 0.8Ω Mesh Coil

Fit for Luxe X: 0.4Ω/0.8Ω Pod, Luxe XR RDL/MTL Pod, GTX 0.4Ω/0.6Ω Coil (Fit for XR RDL Pod), GTX 0.8Ω/1.2Ω Coil (Fit for XR MTL Pod)

Product Size: 98*31.5*21.6mm

Packing Size: 126*98*38mm

Color: Galaxy Blue, Galaxy Red, Galaxy Purple, Gold, Black, Pink, Silver

FEATURES:

1. Built-in 1500mAh battery with 40W output

2. COREX heating tech for accurate flavor

3. Adopts AXON Chip with smart control

4. Abrasion/stain resistant coating and PCTG tube

5. Auto lock the device after 8S pressing

6. Secured mode to avoid accidental misfiring

7. Designed with 3 LED lights to display

8. Futuristic design, crystal and solid body

9. Adopts SSS leak-resistant technology

10. 5ml e-juice capacity, easy bottom filling

11. Fit for Luxe X 0.4Ω/0.8Ω Pod, Luxe XR RDL/MTL Pod, GTX 0.4Ω/0.6Ω Coil (RDL), GTX 0.8Ω/1.2Ω Coil (MTL)

INITIAL THOUGHTS:

Although there are many similarities between the Luxe X and Luxe XR, there are a few differences. When I first received the Luxe X, I was surprised that a pod of that size did not have replaceable coils. That being said, I very quickly took to the .4 ohm sealed pod and almost immediately ordered some spare pods. The Luxe XR is an improved version of an already great pod device.

The packaging for the Luxe XR is very nice as I have come to expect from Vaporesso. The front has a color picture of the actual device contained inside in the same color. Some companies use the same image for all colors but Vaporesso did not with the Luxe XR. Also on the front is the large Vaporesso logo in green.

The back side has a complete list of contents, specifications, company information, a bar code stating that this sample is the Galaxy Red version, and a warning near the bottom.

Once the outer sleeve is removed then you are greeted by the Luxe XR with a pod and coil already installed and a black sleeve on the right side that contains the user manual. Under the sleeve is a USB-C charging cable and a second pod with a coil already installed in it as well. Now this is how you ship a pod kit! I’ve reviewed several pod kits where only one coil or one pod is included in the kit and I don’t approve of that. A second coil or pod should be included in every pod kit in my opinion. Then here comes Vaporesso who not only gives you two coils but also two pods so you can try different liquids in each pod with each coil. Well done Vaporesso!

The two pods included are labeled MTL and RDL. The look similar at first glance but are a little different. The first difference is the size of the mouthpiece. The mouthpiece is a little smaller on the MTL pod. The other thing that I noticed is that the MTL pod has a smaller airflow hole in the base of the pod. In the first picture below you can see that the RDL pod is on top with the larger airflow hole. Also notice that there are four magnets to hold the pod into the battery portion securely. The fill port on these new pods is just like the ones on the Luxe X with the plug on one end with an arrow and can be rotated slightly out of the way for a mess free filling experience. Also Vaporesso has done a great job with their SSS leak proof technology to virtually eliminate any kind of leaking issues. At least this has been my experience since they started using this technology.

Although the Luxe XR does not have a conventional airflow control, you can rotate the pod 180 degrees to switch the amount of airflow that is given. This is accomplished by the raised platform on the pod that limits the airflow then when rotated there is no longer restricted.

The coils included in the kit are the GTX series .4 ohm mesh coil rated at 26-32 watts for the RDL pod and the .8 ohm mesh coil rated for 12-16 watts. Although these two are included, you can also use the .6 ohm and 1.2 ohm mesh coils. I probably wouldn’t recommend running any of the lower resistance coils due to the 40 watt limitation of the output available.

The body of the Luxe XR is much like the original Luxe X. It uses the Axon chip with smart control having a 1500mah battery and a charging rate of 1.5A. The body is made of three layers to make it durable and scratch resistant while maintaining a Crystal Clear body that allows the user to see the electronics inside. I’m glad that they didn’t make the body light up. I think it would have cheapened the appearance of the device.

The back side of the XR shown in the picture below on the left has the Vaporesso logo on the speckled red portion that is supposed to emulate the look of the galaxy thus the name “Galaxy Red”. Below that is the Luxe name done very stylishly.

The front has the single fire button. Just like the Luxe X, the XR has one button to fire the device and no screen or adjustment buttons. The Axon chip automatically adjusts depending on the resistance of the coil used in the pod. Below the button is the “Crystal Clear” body that allows you to see the electronics inside with the AXON name in the middle. On the front of the XR there are three battery indicator lights that illuminate when firing the device or charging. The three lights indicate the following battery ranges.

• Three lights illuminated = 60%-100% battery level
• Two lights illuminated = 30%-60% battery level
• One light illuminated = <30% battery level

The Luxe XR also has some built in safety protections like the Safety Mode. This is a cutoff timer. If you press the fire button longer than 8 seconds then the lights will flash three times and shut the device off. In order to continue using it then you will have to do the five presses of the fire button to turn it back on. The other protections built into the Luxe XR via the Axon chipset are as follows.



Low resistance: The lights flash five times and output stops


Short circuit protection: The lights flash five times and output stops


No Load: Current power level light flashes three times and output stops


High Resistance: Current power level light flashes three times and output stops


Low Voltage: All lights flash three times and output stops


Overcharge Protection: Device stops charging automatically when battery level is full



The red portion wraps around the entire mod and on one side is the Vaporesso name. Also there is a different size airflow hole on each side of the XR to help with the airflow difference when you rotate the pod. The USB-C charging port that allows the XR to be charged in about an hour is on the bottom of the mod just like it was on the Luxe X.

FINAL THOUGHTS:

I have written reviews for Vaporesso for years now and they seem to continue to put out one quality product after another. To this day I still use the very first Xros that they sent me for review when it was initially designed and released. The Luxe XR is a welcome improvement to the Luxe X with the ability to use sealed pods or open pods that can be used with at least four different GTX coils that I know of. The GTX coils have always been a very good flavor producing coil in my opinion. I have a stockpile of the earlier GTX coils that were made before the third o ring was added like what is on the existing series of coils.

The .4 ohm mesh coil gave very good flavor and vapor production using it in the pod labeled DTL. I preferred it turned to provide the maximum airflow. It provides a very nice RDL but isn’t quite enough to be a loose DL. The .8 ohm coil also produced very good flavor with the MTL pod turned to provide the most airflow available and gave a loose MTL type of draw. I used Dinner Lady Purple Rain on the .4 ohm coil mixed at 70/30 and used RY4 Cream on the .8 ohm coil also mixed at 70/30. Not once did I get a dry hit with either one even when chain vaping. I did notice a slight loss in performance when the battery level had been at one indicator light lit so knew it was time to recharge before it was completely dead.

I think it’s wonderful that Vaporesso included two different pods and two different coils with the Luxe XR kit to enhance the user experience right out of the box. I know I don’t really need to tell you this but YES I’d definitely recommend the Vaporesso Luxe XR for you if you are looking for a small pocket carry pod that vapes like a mod and tank to some extent. To me the RDL experience with this one is very enjoyable.

I’d like to thank Vaporesso and Danny for sending the Vaporesso Luxe XR Kit for this review. Thanks also to you the reader that takes time out of their day to read my reviews. Below is a link to the website so you can see all of the great devices that Vaporesso has to offer.

LUXE X | XR POD Kit » VAPORESSO

Wismec Reuleaux RX G 100W VW Box Mod any color and/or

SXK CinqueTerre Styled 70W TC VW APV Box Mod

Hello again folks and welcome back for today's review of the Galex Pod MTL Device from Freemax, I was sent a sample version that is a first batch that goes out to reviewers for feedback and not the final retail version. The Galex is a simple and easy system having no buttons, information display screen or adjustments. Having a auto-draw feature is great if the device performs well and having the wattage pre-set depending on the coil used also is a great feature if it works well. Airflow is also pre-set so this is where some people will like it or not based on your inhale type of either loose or tight or somewhere in the middle, is a I'll cover all of it in my review so you can determine if it's a good fit for you. Before my review of the Galex lets check out some information on it supplied from Freemax.





COLOR CHOICES





IN THE BOX


* 1pc Galex Kit

* 1pc GX Mesh Coil 0.8ohm

* 1pc GX Mesh Coil 1.0ohm (Pre-installed)

* 1pc Warning Card

* 1pc Warranty Card

* 1pc User Manual

* 1pc USB Type-C Cable

* 1pc Desiccant




FEATURES


* Battery Capacity: Built-in 800mAh Battery

* Output Wattage: 11W-16W

* Output Voltage: 3.3V-3.5V

* Type-C USB Port

* Full Spectrum Vaping

* Child Resistant

* FM SaltCoilTech 4.0 technology

* Quenched SS904L Mesh

* Pod Capacity: 2ml

* Compatible with GX Mesh Coil





SPECIFICATIONS





FM SALTCOILTECH WITH 50% INCREASE OF TEA FIBER COTTON







SS 904L MESH FOR PURE FLAVOR





MAZE CHIMNEY DESIGN PREVENTING LEAKING ISSUES





EASY 2ML CLEAR TOP FILL POD THAT IS CHILD RESISTANT

The first reading for a flavor ban is scheduled to take place in early December, with the goal of activating a ban in April 2023.

READ MORE: South Portland flavored tobacco ban likely to come next spring

I'm not sure this was the best place to post my thread, but it looked right to me. I'm new to RDTA tanks. I like it a lot, but I'm having trouble finding mesh coils locally. I've looked online without 100% success. I want 18 ohm mesh coils. I wasn't able to find any.
I googled the best mesh coils for flavor. 0.18 ohms was the answer I got. I'm using a 0.13 ohms nexMESH coil now. It's ok, but I'd like better flavor. I don't care about big clouds of smoke. I care about a smooth/ flavorful smoking experience.
I'm hoping someone can point me to some good online sites where I be able to find the mesh coils I want.

The UWELL Crown D Pod Mod is much closer to an AIO than an actual pod mods and see's the Crown name rejoin the pod line up of UWELL for the second (or possibly third) time.

CHAPTERS

00:00 - Intro and specs
05:00 - Close Up
12:00 - Vape
14:00 - Thoughts

On Rumble - Login to view embedded media
On YouTube - Login to view embedded media

These were discontinued while I was busy stocking up on TFV 18 tanks. I'm short two decks, so I'm looking for two of them, preferably new, but used in good condition is also fine. Thanks!

Hi, today let's take a look at Hellvape's Eir Pod Kit. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Hellvape Eir Pod Kit; Before starting let's see together some special features indicated by the manufacturer:
1. Activation button + automatic activation
2. Adjustable airflow: MTL or RDL
3. Type-C fast charging
4. Built-in 800mAh battery
5. LED screen
6. Adjustable power 5-18W
7. Replaceable Mesh Coils: P3-01 0.8Ω, P3-02 1.2Ω
8. 2.5ml cartridge side fill



► Hellvape Eir Pod Kit; Packaging:
The two-tone white / orange packaging of Eir pod kit is softer, reassuring and serene, compared to the eye-catching and menacing deep red style that Hellvape has accustomed me to. The box shows on the front an image of the device, the logo, the brand, and logically the name of the product. On the back you can read, the content, the manufacturer's support addresses, barcode, scratch & check, trademarks and legal logos. On the remaining sides of the box you can see numerous features in the form of icons.





► Hellvape Eir Pod Kit; Packing List:
1 * EIR Device (800mAh)
1 * EIR Empty Pod (2.5ml)
1 * Mesh Coil P3-01 KA1 of 0.8Ω
1 * Type-C Cable
1 * User Manual
1 * Lanyard



► Hellvape Eir Pod Kit; Specifications:
• Size: 106.5 * 24.5 * 14.3mm
• Pod capacity: 2.5ml / 2ml (TPD)
• Battery capacity: 800mAh
• Pod: 0.8Ω KA1 rechargeable pod (14-16W)
• Charging: Type-C, 5V / 1A
• Net weight: 40g



► Hellvape Eir Pod Kit; Available colours:
• Light Blue Pink
• Green Blue
• Light Pink
• Silver Black
• Carbon Fiber
• Legend Black
• Gunmetal
• Darkish Green



► Hellvape Eir Pod Kit; First Impressions:
I think this is Hellvape's first Pod-Mod and I have to say it looks really good! It has a sturdy alluminium alloy construction, two different activation systems (manual and automatic), replaceable coils, a rather spectacular LED, a bright mini-display and a fairly large battery with fast charging! Furthermore, Eir Pod has an effective regulation of the air flow through the tested 180 ° rotation system of the cartridge. Hellvape is one of my favorite brands and even if I am not a fan of "Pod Mod" I am very intrigued by this device because it appears very well finished and full of options. In the image below you can evaluate the compactness of Eir pod kit compared in size to a common lighter! The cockpit has an oval screen with a small and very bright display inside, the power button is slightly protruding and well sized. The other side of Eir Pod Kit bears the word "Hellvape" arranged vertically and in white. For the review I was sent two EIR kits and a box of coils. The two color versions I received are Gunmetal and Darkish / Green. Both are very beautiful, as are the other colors in the entire range.



► Hellvape Eir Pod Kit; Display:
It contains all the basic information such as; Graphic level of battery charge, Set power, Ohm of the Coil, Puff counter. In addition, the chipset will send safety notifications to the screen in case of malfunctions.



► Hellvape Eir Pod Kit; Operation Guide:
• 5 clicks to turn on / off the Mod
• To set the power, make 3 clicks, then the numerical value will flash, click to go up by 0.5W at a time up to 18W and click again to restart from 5w.
• Low battery: The LED flashes 10 times and delivery stops, then recharges the device.
• Protection from prolonged activation 10S: The LED flashes 3 times when you exceed 10s of continuous vaping.
• Short-circuit protection: The LED blinks 5 times when the device is short-circuited.
• Recharge: While the device is being recharged, the LED is activated in the following ways; when the recharging of the device is interrupted, the LED flashes 4 times;
• When recharging is complete, the LED stays on.



► Hellvape Eir Pod Kit; MTL Airflow:
On the side profile of the mod there is a small hole to convey the external air towards the inside of the compartment / pod and towards the coil. The size of this hole is what one would expect to achieve a well calibrated MTL flow.



► Hellvape Eir Pod Kit; AFC:
By inserting the cartridge inside the Eir Mod we get a certain air flow, by removing the cartridge and turning the cartridge by 180 ° we get another type of air flow. You can choose between MTL stream and RDL stream.



► Hellvape Eir Pod Kit; Over and Under:
The compartment / pod naturally contains the two contacts for electrical conduction towards the coil, but also contains the automatic detection sensor of the puff which is of the raised type to avoid the absorption of condensation residues. There are no magnets and the cartridge fits mechanically by interference into the body of the Mod in a precise way.



The Usb-C charging socket for the integrated 800mAh battery is located on the bottom and it takes an average of 40 minutes to fully recharge the cell.



► Hellvape Eir Pod Kit; Eir cartridge:
Eir Pod's Pctg cartridge has the classic duckbill form factor that is very comfortable for the lips, the body of the Pod is dark, but this does not prevent the visual control of the internal e-liquid. The refill is of the lateral type, quite convenient, and allows you to insert up to 2.5ml of e-liquid. I usually use 10 or 30ml plastic bottles for refilling and both fit easily into the fill port. The coils are inserted from the bottom with a slight pressure.





► Hellvape Eir Pod Kit; Eir Meshed Coils:
Eir Kit is delivered with a single spare coil, it is a 0.8Ω Mesh Coil P3-01 KA1 with range 14-16W and as an option it will also be possible to purchase a 1.2Ω Mesh Coil P3-02 KA1 with range 10-12W.



Both Mesh Coils P3-01 and P3-02 can be purchased in containers of 3 pieces each, Hellvape was kind enough to send me 3 spare ones, but they are all P3-01 KA1 from 0,8Ω, so I will not be able test the P3 -02 KA1 of 1.2Ω.



► Hellvape Eir Pod Kit; Vaping test & final conclusions:
Although there are an infinite number of pod proposals on the market, I must say that it was a huge satisfaction to test Eir Pod Kit, because this is a real pocket jewel that clearly stands out from the others, is rich in features, is robust and well finished. The screen is minimal but it is bright, and the fonts are clearly visible. Furthermore, the screen and the LED light up only during extraction, also allowing a certain energy saving for a greater autonomy of vaping. In "automatic puff" mode the extraction is perfect and free of indecisions, however for those who want it there is the classic activation mode via a sturdy and silent Fire key of exquisite workmanship. The 800mAh internal battery has a suitable size for this kind of device, guarantees a long autonomy and can be charged in about 40 minutes with a charging speed of 5 V / 1A. I managed to get 190 puffs at a constant 15W before recharging the battery.

For my Vaping test I used Crispy aroma mixed at 10% in a solution of Vg50 / Pg50 with 3mg / ml of nic. With the Mod set to 15W the hit in the throat is evident, and the flavor is very good, with a notable production of vapor especially in the RDL position of the AFC. The difference in the airflow by turning the cartridge is stark and I believe this is one of the best systems of its kind. The AFC system guarantees both fluidity and contrast to the puff, flawlessly. The MTL flow is really well contrasted and allows you to accentuate the hit in the throat, even if I'm not a fan of the restricted MTL, I must say that with this coil I feel really good, both for the flavor and for heat of the steam. The puff looks very clean, without spitbacks and even the formation of condensation was really negligible if not absent. The "SMART" function selects the right activation power thanks to the reading accuracy of the coil, my 0.8 coil is read on the display precisely 0.8!

In conclusion, if you are looking for a high-quality, high-performance Pod device in the MTL range, I highly recommend that you consider Eir Pod Kit.

I would like to thank Hellvape for providing me with the kit. I hope this review was useful for anyone looking to buy Eir Pod.

Thanks for reading.

One of the divine members of the Mythologique series of the French manufacturer is the Greek sun god Helios, in whose chariot we can now taste a banana and vanilla dessert in the form of steam. The execution and the concept itself are really well done, but let's see the "divine" aroma. The manufacturer recommends mixing 10-20%, which I set to 12%. I was afraid it would be a bit sweet if I halved it and mixed it to 15%. It smells pleasantly banana, with a slight hint of vanilla. The manufacturer also indicated the premium quality on the bottle, which I think is justified based on the smell. Its taste is characterized by banana and creamy vanilla, which comes out very nicely when you look at the harmony. I could say that these two elements, which are favorite flavors among dessert lovers, were put together divinely. The banana is not too ripe, the vanilla is not too sweet. This in itself is a success in aroma mixing. In the indicated mixing ratio, they give you the possibility to get a slightly stronger or weaker all-day liquid. I'd say it's well worth the money, overall the taste and smell are of premium quality.

Ambition Mods Amazier MTL RTA Rebuildable Tank Atomizer
authentic / 316 stainless steel + glass / 22mm diameter


Details:
The Authentic Ambition Mods Amazier MTL RTA Rebuildable Tank Atomizer is made from 316 stainless steel in 22mm diameter and holds 4.0ml capacity. Theis flavorful single-coil RTA supports classic mouth-to-lung (MTL) vaping and easy-to-grip controls and comfortable handling. The Ambition Mods Amazier MTL RTA is with practical top filling system and liquid control adjustable by turning the tank section.
Flavorful single-coil RTA for classic mouth-to-lung (MTL) vaping
Easy-to-grip controls and comfortable handling
Material: SS316, PEEK, POM, borosilicate glass
Capacity: 4ml/2ml
Practical top fill
Liquid control adjustable by turning the tank section
Airflow regulation through exchangeable Air Pins (1.0, 1.5 and 2.0 mm ID Air Pin included) under the coil in the 510 pin
Compatible with the Air Pins of the Ambition Mod Gage / Gate RTA
Quick deck access through plugged-in tank section with locking
Comfortable single coil deck
Exchangeable 510 drip tip with stainless steel base and POM mouthpiece
510 threading connection
22mm overall diameter

Dear all,

This is the official giveaways and the prize is VOOPOO ARGUS new product that will be launched on 18th October！



Post the answer of the question and invite 3 friends, we will randamly choose 2 friends and give each of you 1 new product!

To enter:

1. What Dose "FAST AND SPEEDY" on the Preview Image Refer to?

2. Invite 3 friends (by @ 3 friends) to join in the giveaway.

Notes:

1 You must be 21 or older.
2 The contest will end on 18th October.
3 We will chosen the winners randomly.

Recently, the endless number of disposable vape has made it impossible for vapers to start. A product that was put on the shelves some time ago has a very strong response from customers. I have to recommend such a good product to everyone. It will definitely become an indispensable part of you.

Aroma King Gem Disposable Vape Kit has a transparent and slender casing wrapped in a colored body. There are a total of 19 flavors to choose from, and each flavor corresponds to a color. 2ml of pre-installed e-liquid can support up to 600puffs, simple inhalation activation without complicated buttons, making smoking so easy. The 500mAh battery is also good enough for a long period of time, just throw it away when you run out.

It is worth mentioning that the nicotine content of 20mg allows you to enjoy the feeling of smoking a cigarette, and the ratio of 50% VG and 50% PG provides a balanced flavor and cloud. A total of 19 flavors contain different kinds of flavors. Next, I will briefly introduce a few flavors.

Strawberry Kiwi is a fusion of sweet strawberries and tart kiwi for a deliciously tart, fruity flavor.

Aloe Cucumber combines the botanical scent of aloe vera with gold. The light fragrance of aloe vera and the vegetable flavor of cucumber give a very comfortable taste enjoyment.

Mr Blue blends fresh blue and purple berry flavors with cool menthol and anise to fill the mouth with a cool, fruity aroma.

Many products of vape warehouse are on sale at discount, time is limited, come and buy.

We want to share with you：
smok rpm 3 coil
smok mag 18 kit

Full Colors of Eleaf iStick Power Mono：Green Black，Yellow Blue，Black，Black Grey，Orange Brown
Check the photos below
Please tell me your favourite color
BTW, Wanna get it for free? Just Click Here!!!

Eleaf iStick Power Mono Mod is a very powerful device with a 3500mAh built-in battery that provides a maximum output of 80W. Perfect for securing your day of vaping. If you are a huge cloud lover, this one is definitely for you. 2A fast charging also helps you fully charge your device quickly.


Combining an OLED screen on the side of the unit to view the data, and you can easily adjust the power with the +/- keys, the power range is between 1-80W. The intelligent chip can automatically identify the optimal power according to the coil resistance value, ensure the stability of the device operation, and prevent the coil from drying out.

3 protection modes, over-time protection, short-circuit protection and low voltage protection can also protect eleaf istick power mono well.

Power Mono Mod fits perfectly with the Eleaf GTL Pod and has a regular 4.5ml capacity as well as a 2ml TPD capacity. The material also adopts a relatively advanced leather design, and the comfort can be given full marks.

More products suggestion:
a2s caliburn review
luxe x vaporesso price

The Lykcan Belo Disposable E-Cig of vapesourcing is a thin and portable disposable device that is rechargeable and lasts approximately 6000 puffs. It features an internal mesh coil that offers users a flavorful vaping experience and contains 12.0 mL of salt nic e-liquid. Choose from many of their tasty flavors and find out what's your favorite.

The attractive packaging of disposable vape draws you in, but then the awesome performance of this vape device impresses you and makes you want more. With 5% Nicotine Salt and an approximate 6000 Puff capacity, there is a lot to like about the Lykcan BELO 6000 Puff Disposable. Its E-Liquid Capacity is 12ML, it has an Integrated 500mAh Battery, is disposable, rechargeable, but non-refillable.

Lykcan BELO Specifications:
Capacity: 12mL
Battery: Internal 500mAh
Nicotine Strength: 5% or 50mg
Puffs: Approximately 6000
Charging: Type-C Port

Features:
6000 Puffs per Disposable
Mesh Coil
Eliquid Capacity: 12mL
Integrated 500mAh Battery
Nicotine Salt
5% (50mg) Strength Only
Draw-Activated Firing Mechanism



Recommended products:
elfbar bc5000 ultra Pennsylvania
elf bar California

Smok T-Air Subtank is the vape tank atomizer designed with a range of practical and functional features. The top dual-slotted honeycomb airflow control will shorten the airflow and reduce air loss for increased vapor and enhanced flavor to provide you top notch flavor.

T-Air Subtank by Smok vape is completely leak-proof with the design of five rubber rings. As for the filling system, the quarter-turn top cap and dual filling ports make the filling more convenient. Smok T-Air Subtank can hold 5ml (standard) or 2ml (TPD) e-liquid capacity, is compatible with TA 0.2ohm and 0.15ohm coils.

SMOK T-Air Subtank Atomizer Parameters:

Features

• Honeycomb Top Adjustable Airflow
• Top-filling Method
• 810 Drip Tip
• 5mL E-liquid Capacity
• Plug/play Meshed Sub-ohm Coils
• 0.2ohm Single Mesh Coil(Best For 65W)
• 0.15ohm Dual Mesh Coil(Best For 55W)
• Stainless Steel and Pyrex Glass

Welcome to vapesourcing.com,get the cheapest T-air subtank.

You may also like:

novo 4
caliburn x