New vaper here, just few months of "experience". Came to learn.

Ive been smoking regular cigarettes for over 20 years, last few years I've hand-rolling Old Holborn and I've, to be honest, enjoyed the whole experience! Except for the part where I smell to everyone, freeze during cold days and nights while taking my dope and start to silently panick when I see I'm near the bottom of the tobacco pouch.

Anyways, I had a try of an e-cigarette maybe 9 or 10 years ago... a cigarette shaped "mod" but with a separate refillable tank. The experience was awful. I still have the device somewhere probably...

Then, around 6 months ago I got a Smok R-Kiss 2 kit as a present and I gave it another shot.

I didn't like it either... I actually couldn't get used to DTL - it was the only tank that the kit shipped with. So, I kind of "vaped" the first tank, but I was heavily combining with regular cigarettes.

Then I made a vaping break of few months and got another Smok, this time an IPX80. And that was a life changer.

From the first inhale (Ritchy Liqua, Bright Tobacco, 18mg) few months ago - I just forgot about the regular cigarettes. I really enjoyed the experience and still enjoying it. No more smelling like sh*t, no freezing outside during cold days and my family has nothing against vaping in the common areas of the home.

After the first few weeks of pure pleasure, I started to search around about a possibility to revive the "old" R-Kiss 2 and I learned I could top it up with just another atomizer and use it for MTL I guess that was just the very first "feeling stupid" experience in my vaping learning experience. I've got an Aspire Nautilus 3, it's still with the original 0.7ohm coil (the mesh one), and I use it for MTL.

Now, I found out this forum while searching for reasons for some odd differences between these two devices. I use the very same liquid in both (the aforementioned Bright Tobacco):
- IPX uses a 0.6ohm coil and has a 5.5ml tank
- Nautilus 3 has a 0.7ohm coil and a slightly smaller tank

The Nautilus tank seems to be consuming around double the e-liquid than the IPX80's (one tank on IPX80 lasts almost 4 days, while the Aspire needs to be refilled every two days). It also gives a slightly colder "smoke", the TH is a bit weaker as well and the amount of "smoke" is less than the one from IPX80.
The IPX80 smoke is, on the other hand, a bit "dryer".

So, I hope I'll learn why this happens, how to knowingly "fine tune" the atomizers and coils and, hopefully, much more that I'm not even aware yet I should learn (I'm already lurking guides about DIY coils and stuff, but I wouldn't dare to try before I know much, much more).

Anyway, nice to meet you all and thanks for sharing all your knowledge and experience. Cheers!

Hello and welcome back for another vape review, today's review is on the Drag S2 Kit which is the little brother to the Drag X2 Kit I reviewed a few day's ago. Both of these kits are almost identical but for a few differences, on this Drag S2 a 2500mAh internal battery is used instead of the replaceable 18650 battery used on the Drag X2 plus the maximum power output is 60watts instead of 80watts with the X2. This is a bit smaller in size as well, both use the new pod though with A different preinstalled coil for the X2, There is also a MTL version of this kit. The differences are very minor ones for the X2 and S2 and both kits could have been done in 1 review but the manufacturer Voopoo requested 2 reviews so I will oblige.

What are the differences between DRAG S2 and DRAG X2,

Both DRAG S2 and DRAG X2 apply VOOPOO PnP X Platform. The main differences between them are as follows:

Device:
DRAG S2 is the device with included 2500mAh battery and 5-60 W power output.
DRAG X2 is a pod mod with single external 18650 battery (not included in the package). The power range is from 5W to 80W.

Cartridge： The standard cartridge for DRAG S2 DTL version is PnP X Cartridge DTL and the compatible coil resistance is 0.2ohm and 0.3ohm. The standard coils are PnP X 0.2ohm and PnP X 0.3ohm. It is recommended to choose the e-liquid with 50%-70% VG and whose nicotine content of no more than 35 mg. For the DRAG S2 MTL version (Only For Italy, France and Germany), the standard cartridge is PnP X Cartridge MTL with PnP X 510 DTL Drip Tip(Pre-installed) and PnP X 510 MTL Drip Tip(Replaceable) ( the wider one for DTL, the narrower and longer one for MTL and RDL) and the compatible resistance is 0.3ohm and 0.6ohm. The standard coils are PnP X 0.3ohm / PnP X 0.6ohm. It is recommended to choose the e-liquid with 50% VG and whose nicotine content of no more than 35 mg.

The standard cartridge for DRAG X2, PnP X Cartridge DTL , is the only one for the global and its compatible coil resistance is 0.15ohm and 0.3ohm. The standard coils are PnP X 0.15ohm and PnP X 0.3ohm. It is recommended to choose the e-liquid with 50%-70% VG and whose nicotine content of no more than 10 mg.





COLOR CHOICES





IN THE BOX ( 0.2Ω Is Preinstalled In My Sample Version )


* 1pc Voopoo Drag S2 Device

* 1pc PnP X Cartridge DTL (5ml)

* 1pc PnP X 0.2ohm (Pre-installed)

* 1pc PnP X 0.3ohm

* 1pc User Manual

* 1pc Type-C Charging Cable

* 1pc PnP X Platform Card





SPECIFICATIONS





NEW POD FEATURES WITH NEW COILS














NEW TOP AIR POD

I have a BRAND NEW Dovpo Topside Dual device still sealed. It’s all black and as I said the packaging is sealed.

Described as…. “The DOVPO TOPSIDE DUAL 200W Squonk Box Mod is an updated rendition crafted in collaboration with The Vapor Chronicles, presenting a polished dual 18650 platform while maintaining the innovative top-fill squonk designs and upgraded power chipset!”

They are difficult to find especially the solid color finishes and the prices are high especially when you add in special shipping constraints and signature fees.

Original cost was $99 plus fees.
Cost is $80 with Priority 2 Day shipping and tracking in the CONUS only.
Prefer Zelle or Zenmo over PayPal.

Hello, today we take a look at the Lost Vape Centaurus Aio B60 & B80 Aio. In this Test I will examine each of the characteristics that distinguish these items. I hope that by the end of this reading you will have understood these products, and therefore decide whether to invest in them or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Lost Vape Centaurus Aio B60 & B80; Before starting, let's look together at some special features indicated by the manufacturer:
• Max 60W Output Aio B60
• Max 80W Output Aio B80
• Seamless Zinc Alloy
• Unlimited Combination
• Your Airflow, Your Way
• Easy RBA - Mode Switch
• Compatible with Ub Aio Pod & Centaurus Boro Tank RBA



► Lost Vape Centaurus Aio B60 & B80; Gift Box:
This time Lost Vape really impressed me by sending me two Gift Box Kits of Centaurus Aio B60 & B80. The packaging is fabulous and contains two devices; one is the B60 and the other is the B80. Furthermore, in the Gift Box there are all the accessories and also two powerful 3,000mAh IMR Gold 18650 Golisi batteries which are for the Centaurus B80. This is the beautiful packaging that Lost Vape sends to the reviewers of the brand, I am very happy to be part of it, and I feel privileged, thank you Lost Vape.



► Lost Vape Centaurus Aio B60 & B80; Packing List
*Centaurus B60 and B80 can be purchased individually; the following is the list of what you will find inside their standard packages:

• 1* Centaurus B60 AIO device
• 1* 5ml UB AIO Pod
• 1* 0.3Ω Coil Ultra M6
• 1* 0.2Ω Coil Ultra M7
• 2* Drip Tips
• 5* Silicone rings
• 1* Metal key
• 1*Type-C cable
• 1* User Manual
• 1* Warranty Card

• 1* Centaurus B80 AIO device
• 1* 5ml UB AIO Pod
• 1* 5ml Centaurus Boro Tank
• 1* 0.2Ω Coil Ultra M7
• 1* 0.15Ω Coil Ultra M8
• 2* Drip tip
• 7* O'rings
• 1* Atomizer Parts Package
• 1* Metal key
• 1*Type-C cable
• 2* User Manual
• 1* Warranty Card



► Lost Vape Centaurus Aio B60; Specifications:
• Dimensions: 85mm*43mm*25.5mm
• Battery capacity: 1600mAh
• Power range: 5-60W
• Voltage range: 3.0-4.2V
• Resistance range: 0.15-2.0Ω
• Frame Material: Zinc Alloy + Stainless Steel
• Display: 0.42 inch OLED screen
• Charging: Type-C port
• Operation: activated by button
• Pod Platform: UB AIO Pod
• Pod capacity: 5ml
• Pod Construction: PCTG
• Pod filling system: Side filling
• Compatible coils: Lost Vape UB Ultra
• Coil Installation: Press
• Pod Connection: Press

► Lost Vape Centaurus Aio B80; Specifications:
• Dimensions: 80.8mm x 50mm x 24.4mm
• Battery Capacity: Single 18650 (not included)
• Power range: 5-80W
• Voltage range: 3.0-4.2V
• Resistance range: 0.15-2.0Ω
• Frame Material: Zinc Alloy + Stainless Steel
• Display: 0.42 inch OLED screen
• Charging: Type-C port
• Operation: Activated by button
• Pod Series: UB AIO Pod / Centaurus Boro Tank
• Boro Atomizer: Deck Build Dual Post - Single Coil
• Pod capacity: 5ml
• Pod Construction: PCTG
• Filling system: Lateral
• Coils platform: UB Ultra coils
• Coil Installation: Press
• Pod Connection: Press



► Lost Vape Centaurus Aio B60; Available colours:
• Cyber Storm
• Cyber Black
• Laser Black
• Pink Keep
• Laser Gunmetal
• Winter Splatter
• Spring Blast
• Summer Breeze

► Lost Vape Centaurus Aio B80; Available colours:
• Space Silver
• Particle Gunmetal
• Magnetic Black
• Nebula Star
• Nebula Sparkle
• Gush grey
• Gush Black
• Gush Green



► Lost Vape Centaurus Aio B60 & B80; First Impressions:
The regularly sold packages of these kits will include; two coils, a USB-C cable, two drip tips, a user manual and the UB AIO cartridge. A metal wrench to secure the tank is also included. Centaurus B80 has additional equipment which includes; the Centaurus Boro Tank rebuildable single coil, three different airflow pins and a 510 thread adapter for mods really useful during the coil building phase. Furthermore, B80 has a beautiful Drip Tip with a colored antimicrobial band. For this test I received the Centaurus B60 in the color "Spring Blast" and the Centaurus B80 in the color "Gush Green". Both devices have bright and trendy colors, looking at the other available colors I really like the versions with transparent shell. I immediately started handling these kits, and as usual all the great quality of Lost Vape immediately shines through, both kits are quite compact and are really solid thanks to the zinc alloy.





► Lost Vape Centaurus Aio B60 & B80; Replaceable Panels:
The side panels are fixed to the respective Mods via 4 small circular magnets which perform their task perfectly. What you can notice immediately after removing the side panels is that the Centaurus B80 is in full "Boro Mod" style, in fact it has the display, the USB-C socket and the adjustment buttons which remain inside and are hidden by the panel, the The B80's power button exposes the Centaurus logo and remains exposed thanks to a cutout in the side panel. Of course the B80 also differs in the presence of the replaceable 18650 cell, the battery polarity is very clearly marked inside the B80's battery compartment and there is a lanyard to facilitate removal. When you remove the B60's panels you can see a fancy engraved design and the USB-C socket for charging. Centaurus B60 has the display and adjustment keys located on the outside.



Obviously B60 & B80 are compatible with AIO or Boron tanks which are arranged internally in the Mod; To provide for the coil's air needs there are 3 vents on the side of the mod and an additional 3 vents on the side panel.





► Lost Vape Centaurus Aio B60 & B80; Display and operation guide:
The display of the B60 and B80 models is monochrome and is quite small (0.42 inches). The display shows the set wattage, the coil resistance and the Puffs counter. Centaurus B60 and Centaurus B80 operate in wattage mode and offer Smart or RBA functions. Five clicks will turn the mod on/off, pressing the button three times will change the mode. To lock the adjustment buttons, hold down the Fire and "+" buttons. To reset the puff counter, press and hold the fire and "–" buttons. The Quest chipset is proprietary to Lost Vape and incorporates all the main safety functions, however the operations that can be carried out are basic and there is no temperature control. This chipset works well and has achieved a high degree of reliability in its continuous development over the years.



Centaurus B60 with its 1,600mAh internal battery offers decent autonomy, during the test I managed to get 233 puffs at a constant 35w, then I recharged the battery in 90 minutes. You can adjust the power of B60 and B80 starting from 5W up to maximum power in steps of 0.5W at a time. With Smart mode activated, the Quest chipset will identify the most suitable power for each coil, helping beginners. With RBA mode activated you can independently select the power to apply to your Build Coil.




Centaurus B60 is slightly wider than Centaurus B80, however the footprint of the support base is well sized for both and guarantees stability in an upright position, even during charging. The zinc alloy structure has good heat dissipation and includes the lower cooling holes which also perform an important safety vent function for a possible and not very advisable battery failure. Lost Vape has thought of everything, excellent!





Centaurus B60 & B80 are compatible with AIO and Boro tanks, their arrangement takes place inside the Mods. Therefore using the metal key (present in the package) you can unscrew the steel seat of the Drip-Tip which is threaded, extract the Tank and replace it. When you insert the Tank or the Boro, you can fix them perfectly by simply screwing the threaded seat of the Drip-Tip onto the Mod.



► 5ml UB AIO Pod:
B60 and B80 are supplied with the UB AIO Pod and two different Drip-Tips, the cartridge has a capacity of 5ml and is compatible with the UB Ultra Coils platform. The Centaurus B60 package includes two resistors; M6 Ultra Coil 0.3Ω (30-40W) and M7 Ultra Coil 0.2Ω (40-60W), Of course the M8 resistor 0.15Ω (60-80W) is also compatible but will only work on the Centaurus B80 which also includes the M7 Ultra Coil resistor of 0.2Ω (40-60W). The Ub ultra Coils are inserted from the bottom inside the UB Aio Pod, externally there is an adjustable metal ring to control the air flow from MTL to RDL/DTL according to your tastes. To fill the 5ml cartridge you can conveniently lift the classic rubber cap without having to remove the tank.





► Centaurus Boro Tank:
A second tank is included with Centaurus B80 and it is the 5ml Centaurus Boro. Centaurus Boro Tank is also compatible with Centaurus B60 Mod but in this case the Boro must be purchased separately. Boro Tank is rebuildable Single Coil, the air control is delegated to 3 different Airpins; 1mm, 2mm and 3mm. The 3mm airpin is the one that is installed on the Boro Tank by default.



In the image below you can see the bottom of the Centaurus Boro Tank with the airpin installed, next to it you can see how the refill system is identical to that of the UB Aio Pod. The second image concerns the exploded view of Centaurus Boro Tank with a huge quantity of spare gaskets, the equipment also includes a second additional chimney and also includes an MTL Drip-Tip which can be installed together with a sort of "fairing" which recalls the classic spout of classic Pods. As you can see, the Boro Tank can be largely dismantled for deep cleaning operations.





The Boro Tank package includes a 510 adapter for the Deck and for its installation on a classic Mod, this is very useful for facilitating the coil construction phase.



For the construction phase of the 3mm diameter coil I used flat Alien wire which adapted well to the deck, so to build your favorite coil you can independently use round or flat wire. My coil turned out to be 0.6Ω to be pushed to 18/20W. The screws to tighten the coil legs are small and flat, probably a set of Allen screws would have been better for my poor eyesight. The pockets for the cotton are not very large, so you will want to thin out the cotton whiskers well before inserting them into their respective slots. Centaurus Boro tank is just like the original AIO tank and you can lock it to the mod via the Drip-Tip base which is threaded.



► Lost Vape Centaurus Aio B60 & B80; Final conclusions:
It seems like people are returning with interest in Boro devices lately. Lost Vape is always very attentive to market requests and for this reason it has introduced Centaurus B60 and Centaurus B80 which are two really beautiful AIO devices, with a basic but tested and highly reliable chipset. Lost Vape has intelligently made the B60 & B80 compatible with the large range of Boro Tanks, to the delight of independent vapers who will not only be able to use Centaurus Boro on these Mods, but also on the numerous other Boro style Mods. The Centaurus Boro tank allows a good RDL extraction thanks to the 3mm pin, however you can use the 2mm and 1mm pins if you want to achieve an MTL type or restricted MTL type extraction.

The default installed 5ml UB AIO tank is dedicated to novice vapers and is compatible with Lost Vape's UB Ultra Coils platform. UB Ultra Coils offer top of the range performance, and also long life. All three UB Ultra Coils I received for testing are capable of generating large clouds and providing great flavor. With these Coils I have not encountered any leaks or condensation which generally forms on the internal surface of the panels in other Aio devices. I can only recommend Centaurus B60 & B80 because personally they have completely captured and convinced me!

• I would like to thank Lost Vape for providing me with the Centaurus Aio B60 & B80 for this review.

• Thanks for reading.

Returning long-time vaper looking for squonk mods and quality RDAs. Not interested in any sort of artisan handcrafted high-priced devices.

I would particularly love any version or color of Pulse squonk mods or Dead Rabbit RDAs, but I'm open to everything!

Will pay fair prices plus shipping and won't give insulting lowball offers. Thank you everyone!

Prizes:
3*VOOPOO Drag S2 Kit
3*VOOPOO Drag X2 Kit

We'll have 6 Winners.
The first 3 winners will get the VOOPOO Drag S2 Kit,
the second 3 winners will get the VOOPOO Drag X2 Kit.

All the entries are optional.
Enter here

Thank you for providing this forum service for those who use and consider using electronic cigarettes. I decided to become a member of this forum by examining many existing forums for electronic cigarettes. In addition to finding detailed answers to many questions about electronic cigarettes here, I benefited from the experiences of electronic cigarette users in this forum.

I have been smoking local tobacco like this[1] for about 18 years. This tobacco is the local tobacco of the country I live in. I smoke tobacco the old-fashioned way. In other words, I roll the unprocessed tobacco by hand and smoke it. When the demand for domestic tobacco increased as a result of the hikes in cigarettes in our country, tobacco producers reduced the quality of tobacco. In addition to this, when the sale of domestic tobacco without banderol was banned, tobacco producers started to sell the tobacco they produced to cigarette manufacturers. For this reason, quality tobacco could no longer be found. I cannot smoke cigarettes because I have been using local tobacco for a long time. The taste of packet cigarettes is very bad for me, and they do not satisfy me when I smoke them.

Although I like domestic tobacco, I had to turn to alternatives because I could not smoke quality tobacco. Imported tobaccos are too expensive, so I cannot buy them. My only option seems to be electronic cigarettes. As a result of the information I have obtained from your forum, I am very close to smoking electronic cigarettes.

Although the import and sale of electronic cigarettes are prohibited in the country where I live, they are somehow supplied. However, the very low exchange rate of my country's currency against the US dollar and Euro causes the prices of e-cigarette machines to be higher than in other countries. Therefore, I want the e-cigarette machine I will buy not to disappoint me.

In the light of the information I obtained, I deduced that I was looking for a machine like this:

- It should be big enough to carry in my pocket
- It should be light
- Must be resistant to drops (IP rating is a plus point)
- Must be used with external battery
- Parts such as coils and tanks should be easy to find (it is not easy to find every brand because they are smuggled into my country)
- The biggest feature is that I should be able to get the pleasure I would get from domestic tobacco

When I researched machines with these features, I created the following list:

1. Eleaf Istick Pico 2
2. Eleaf Istick Pico Plus
3. Eleaf Istick Pico LE
4. Innokin Coolfire Z80
5. Innokin Kroma R
6. Voopoo Argus XT
7. Voopoo Drag X2
8. Voopoo Drag H80S
9. Vaporesso Gen PT 80S

Devices 1, 2, 3, and 6 of the above list are available. The Voopoo Argus XT has many features I am looking for, but it is two times more expensive than Eleaf devices and a little too long to carry in my pocket. But there are many comments that it has better performance than Eleaf devices. In this case, the decision of which of these four devices I will buy is affected by the efficiency I will get from the coil and tank. When I read other titles in the forum, such as this [2] title, whether the taste and nicotine I will get from e-cigarettes will be sufficient varies from person to person. Nevertheless, I would like to benefit from your experiences, both about the devices I have chosen and about the transition from tobacco to electronic cigarettes. Do you think the efficiency I will get from the devices I choose will satisfy me? Or would I be in vain?

Thank you in advance for your comments.

[1] https://i.pinimg.com/originals/33/68/ab/3368aba6157860f26bc341869e4219ca.png
[2] Tobacco cigarette vs e-cigarette nicotine equivalency

Are you in search of a disposable vape that combines convenience, performance, and an array of flavors? Look no further than the ICEWAVE X8500 Disposable Vape by TIDEBAR, a game-changer in the world of disposable vapes. In this review, we'll delve into what makes this device stand out from the crowd.

The First of Its Kind: The ICEWAVE X8500 is the first TIDEBAR or ICEWAVE disposable vape to hit the market, and it's already making waves. This device promises an impressive vaping experience that's perfect for both newcomers and experienced vapers.

Impressive Specs: Let's talk numbers. The ICEWAVE X8500 disposable pod boasts an impressive 18ml e-juice capacity, ensuring you have more than enough to keep you satisfied for an extended period. With a 600mAh rechargeable battery, you won't have to worry about it dying on you mid-vape.

A Flavorful Selection: ICEWAVE X8500 offers an extensive flavor range with 16 unique options to choose from. Whether you're into the cool refreshment of menthol or the classic taste of tobacco, there's something for everyone. Each flavor is crafted to perfection, promising an explosion of taste with every puff.

High Nicotine Strength: If you're a fan of that strong nicotine hit, you're in for a treat. The ICEWAVE X8500 delivers a satisfying 50mg (5%) nicotine strength, ensuring your cravings are met with every draw.

Flavor Highlights: Some disposable flavors like Blue Razz Ice, Lush Ice, and Sour Apple deserve special mention. They deliver on their promises, providing a burst of flavor that's both delightful and satisfying.

Related kit you may prefer:
ebdesign airo max
lost mary os5000 luster

Big News Alert!

The moment we've all been waiting for is finally here – KLYPSE MECHA is officially unleashed!️ – delivering all the features you've been waiting for, and more!

Key Features:
High-end material, sleek design
Supplied with a brand-new 0.6ohm refillable pod, while also compatible with all KLYPSE Pods
Adjustable Wattage, Max. 18W Airflow Adjustment.
Round OLED screen with a next-level interface
Powerful 900mAh battery

#KLYPSEMECHA #PodSystem

Discover the ultimate convenience with the Hyde Charger. Perfect for those always on the go, this sleek micro USB charger is a must-have accessory for your vaping needs. Designed to seamlessly integrate with your lifestyle, the Hyde Charger offers fast and efficient charging capabilities, ensuring your vape is always ready when you are. Its compact design makes it ideal for travel, slipping easily into pockets or bags. Visit Hyde Flavors to explore the full specifications and embrace the ease of modern vaping.

Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit-VOOPOO Drag S2 Kit

Drag S2 Kit applies the whole-new PnP X platform, which will bring you excellent performance behind the compact device. It is packed with 2500mAh built-in battery and 5-60W adjustable power range. With the PnP platform, a single coil sustains 100ml oil without taste fading and coil burning, bringing you authentic & pure taste, and a-ten lifespan. Besides, as the newest atomizing tech, PnP X platform comes with the features of 4 times of vaping pleasure, 4-layer super leakage-proof and cost-effective. The top-airflow intake design not only prevents leaking effectively, but also bring a long aftertaste. A new menu interface is added to help you see the main information of vaping. Powered by the new Gene.TT 2.0 chip, Drag S2 has 3 modes for you to choose: Smart, RBA and ECO modes. VOOPOO Drag S2 Kit is equipped with PnP X Pod Cartridge that has 5ml capacity, and is compatible with PnP X Coils.

To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
Sourcemore
Ejuice

If you draw a blank post like
'VOOPOO Drag S2 Kit"
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on Nov. 20th, 2023.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.

Innokin Klypse Mecha Pod Kit, a sleek and innovative vaping device designed for MTL enthusiasts. With its built-in 900mAh battery, this pod kit ensures a lasting vaping experience. The adjustable airflow and wattage range of 6-18W allows users to customize their vaping preferences for optimal satisfaction.

Crafted from durable zinc alloy, the Klypse Mecha Pod Kit boasts a watch design concept, adding a touch of style to its functionality. The 2ml innokin klypse pod, side-filling system, and auto-draw feature provide convenience, while the OLED screen keeps users informed of their settings. The inclusion of a Type-C charging port ensures fast and efficient recharging.

Ideal for those who appreciate a mouth-to-lung vaping experience, the Klypse Mecha Pod Kit combines cutting-edge technology with a user-friendly design. Elevate your vaping journey with the Klypse Mecha, where style meets performance. You are welcome to the online vape shop uk to browse more.

What's more:
vaporesso luxe xr max cmf
voopoo argus p1s vape kit

Smok Igee Pro Pod Kit Crafted with aircraft-grade aluminum and processed by nano-level ultra-fine sandblasting, making IGEE or IGEE PRO not a handy device but an art in the palm. The 400mah Type-C High Speed charging allows this vape to be charged in 40 minutes. Igee Pro features a 0.69inch OLED display,accurately informing you of the remaining battery life,selected power and puff numbers, perfectly replacing an blind experience with an eyes-opening one. Igee Pro supports changing power mode between five options from 8W to 12W.



Features:
1. 0.69 inch OLED display
2. 5 power modes
3. IGEE Meshed 0.9ohm Pod
4. Top fill
5. Leak-resistant technology
6. Visual oil window
7. Childproof lock design
...

Click here for more:

SMOK IGEE Pro Kit: SMOK IGEE PRO Pod System Kit

We are honored to introduce to you the new product of geekvape, which is also a new product added to our website—— Geekvape Tsunami Reborn Z RDA. With a distinctive downwards-slanted airflow and adjustable settings, this RDA promises a tailored experience for both Direct-to-Lung (DTL) and Restricted Direct-to-Lung (RDL) enthusiasts. The dual-coil DIY deck, reminiscent of the classic Tsunami style, ensures an easy and precise coil-building process, catering to the preferences of coil enthusiasts.


One of the standout features is the classic Tsunami deck, providing a foundation for effortless coil customization. Whether you're a seasoned builder or a newcomer, the Geekvape Tsunami Reborn Z RDA guarantees a user-friendly experience, making coil-building a breeze. The inclusion of a Bottom-Feeding (BF) pin further enhances its versatility, offering compatibility with a wide range of setups for a truly personalized vaping journey.

Geekvape has meticulously designed this RDA to deliver an unparalleled vaping experience, focusing on innovation and functionality. The adjustable airflow settings provide an added layer of control, allowing users to fine-tune their vaping experience according to their preferences. Embrace the future of vaping with the Tsunami Reborn Z RDA, now available on the UK vapesourcing online store. Elevate your coil-building game and immerse yourself in the world of limitless possibilities with Geekvape's latest addition to our product lineup.

Recommended Products:
caliburn g3 vape kit
geek vape aegis nano 2

Look at this, this crazy to me, I thought my eyes were playing tricks on me, I cleaned these coils and then when I went to saturate them I hit the fire button and they instantly turned red, they n80 coils I made myself 28g*3 + 40g

Here today we have the all new Drag S2 which accompanies the all new Drag X2 using the all new PNP-X coil and pods system. XCEEDING ALL EXPECTATIONS. The one i received is the beautiful Sky Blue color and i gotta say compared to the X2 i actually like this one (S2) better than its big brother even though it only goes up to 60W and not 80W like the X2. The other differences are that this one has a built in 2500mAh and the ability to change the drip tip from a DTL tip to an MTL tip which is noticably absent on the X2. It uses the exact same coils and pods which means each coil is good for up to 100ML of juice although i only got 80ML but im taking in to account the fact that i chain vape and go thru batteries like water. Another thing worth noting is that the X2 gets hot when charging the device with the battery in it instead of taking the battery out to put on a charger. With that in mind i do prefer the S2. Below are the Specs of the all new S2


**DRAG S2**

DTL Version

Device:

Color: Spray Black, Gray Metal, Colorful Silver, Pearl White, Modern Red, Sky Blue, Glow Pink

Material: Zinc Alloy + Leather

Battery Capacity: 2500 mAh Built-in Battery

Output Power: 5-60 W

Output Voltage: 3.2-4.2 V

Resistance Range: 0.1-3.0 Ω

Cartridge:

Cartridge Name: PnP X Cartridge DTL

Cartridge Capacity: 5.0 mL (Standard & US) / 2.0 mL (TPD)

Recommended E-liquid: 50-70% VG, Nicotine≤35 mg

Resistance: 0.2 Ω / 0.3 Ω

Standard Coils: PnP X 0.2 Ω / PnP X 0.3 Ω

*OVERALL VERDICT/SUMMARY**

I personally prefer the S2 as its a better quality mod IMO and it has better hand feel. Another thing i like is to get the clouds of a sub ohm tank you can go with the .3ohm coil at about 38W and it'll rival the Z tank with ease in the cloud department. I also like the fact theres no batteries to change. Which means no chance it'll get hotter and possibly combust as the S2 stays cool while being charged.

Hi folks,
I'm searching for boge or smoktek cartomizers. Yes I know these are old school and out dated.
All stores that even list them are all out of stock. I hope that some here may know where to find them.
510 threads
regular or XL
Low resistance 2.0 ohms
Thanks for taking the time to read my request

I am a huge fan of A&L aromas. I have about 6 different flavors from them.
There is a percentage of flavoring noted on each of these aromas for which to mix with.
For some of them this is 5% but for others it's 10-12%.

I have an Aegis legend 2 kit with a cerberus tank, Geekvape Z coils (0.2ohm) and I vape at 75W.
My DIY setup is 2 bottles of nicotine 50-50 (20mg/ml) 1 freebase and 1 nic-salt with a base of 20pg/80vg.
This makes my total PG/VG ratio around 34PG/64VG depending on how much aroma I use.

Most of the mixes are really good and have a lot of flavor, but others just taste dull.
It's weird because I use the recommended dosage every time and let them steep for about a week.

Anyone know if there is a reason this could happen? Should I try adding more aroma to the ones that taste dull?
Also, I do the percentage based off the total mixture, so 100ml juice = 10ml aroma (for 10%).

These tests below only note my personal opinion for the ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
Important note…in spite of the “35” in the model number this is a 3350mAh (typical) rated cell.

I’m always interested in finding good performing ultra-high capacity cells but unfortunately this isn’t one of them. While this cell could be a decent choice for very cost-sensitive applications it can’t compete with the other great performing (longer running) cells that are available. Even the 2600mAh Molicel P26A runs for longer at 5A and 10A due to the P26A’s lower internal resistance.

There was a LOT of voltage sag at this cell’s 10A rating so I recommend staying down near 5A or lower.

The two cells I tested delivered 3378mAh and 3412mAh. This isn’t very good consistency but it does meet the cell’s minimum/typical spec of 3250mAh/3350mAh.


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic



18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch | Patreon.

To see how other cells have tested check out this link: Links To All 21700, 26650, 18350, 18500 Battery Tests

Sorry! I thought I was in the DIY section!! I've moved my content over there!!

Solana - La Fabrique à Biscuits - Café
Place of origin: France
Packaging: 10ml aroma
Recommended dosage: 10-15%
According to the Solana manufacturer's description, "A pleasant sensation of a delicious crumbly biscuit dipped in strong coffee" can be expected 4-5 days after mixing the flavouring. The manufacturer has a range of flavours in all categories, having been producing premium quality e-liquids in France for 10 years. They offer affordable prices and a wide range of flavours.
The base flavour will be coffee, which gets a biscuity aftertaste after exhalation. The coffee isn't very strong, although that's not what the description claims, it's more of a weaker latte, which is fine by me. It's soft and creamy, just like I drink in the morning. On exhale, you get a sweet biscuit flavour, which makes me feel as if the top has been sprinkled with seeds, giving the steam a sort of nutty kick. The sweetening is perfectly ok, about a four on a scale of one to ten, which makes it edible all day. Overall, it matches the manufacturer's description except for the "strong", but obviously that could be a function of setup and blending ratio. It is also recommended for atomizer tanks as there is no discolouration or coke on the coil after steaming 20ml of soup, which is a very positive aspect in this coffee category. You can find the product on kumulusvape.fr in both 10ml flavour and longfill.

Login to view embedded media
So I ran across this video of a disposable that has a “capacitor” instead of a battery and thus in theory doesn’t have the disposal problems of lithium batteries… except it apparently does. The reason people worry about lithium containing devices such as batteries is lithium burns energetically on contact with air and produces a lot of gas which can cause an explosion. Anything with a significant amount of lithium in it is potentially an antipersonel mine (yes, this includes your wireless earbuds) The time to explosion is of unknown duration. It’s usually quite long. A hundred years or more, but not always, and landfills don’t go away so they all will eventually go boom if not properly recycled. Normal capacitors are generally metal plates or carbon so they don’t have this problem and are regulated differently. This “capacitor” though doesn’t. It’s more or less a battery that is merely masquerading as a cpacitor to avoid regulation. Strikes me as potentially hellishly dangerous. If not to the user then someone else later after it becomes garbage. They won’t all do it of course. As a lithium battery is discharged it becomes lithium carbonate, which isn’t explosive. The thing is though that lithium batteries STOP DISHARGING before they are completely empty, so an old and degrading lithium battery will still have some metallic lithium in it. It really perplexes me why one might do that. Lithium is expensive but alkali is cheap. The company could have simply put in an alkaline battery and there would be no problem.

---

---

I will leave you the main features and specs below in some tables so that everything is clearer.

---

---

Couldn't have been a better seller. Thanks.

The Armor Max is the first dual battery stock coil kit from Vaporesso for a long time. With an armored appearance to the tank and the mod, are they trying to nudge their way into Aegis sales?

CHAPTERS

00:00 - Intro and specs
01:00 - Close Up
15:00 - Vape
18:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - Login to view embedded media
YouTube - Login to view embedded media