Just wanting to say hello! Mostly here for the classifieds and honestly just making the necessary posts to be able to DM people. So hello to everyone and looking forward to seeing what this site has to offer

Hello everyone!
Getting back into squonks after more than a year away and looking for a plug or 2 to carry as a beater. Not really picky about color or anything just want to find one as cheap as possible.

Is PP soonly fixed,??
ty.

The days of RM2 are gone.
My 'newest' tanks are Siren 2, Berserker (OG) and six Galaxies.
Needed to buy new mods, so I've got two Lost Vape Thelema Solo 100W on the way.
I've been building coils for about a decade, so that's not an issue.
I've got 316SS on hand. And I have minimal experience with TC vaping.
What are the good TC MTL tanks available these days, and who sells them.
Any assistance would be appreciated, Thanks.

Hello folks. It’s been a while since I last reviewed anything for Oxva but here I am with their latest release. This time I will be taking a look at the Xlim Pro Pod kit. You may or may not have seen my prior reviews on other kits in the Xlim series. To me this one is much like the Xlim V2 but has added some new features. It has a 1000mah internal battery with a charging rate of 5V/2A. The included cartridges are .6 and .8 ohm but have been redesigned with what they are calling a top fill. I’ll talk more about that later. Also added to the Pro version is an RGB light bar and it has a .42” OLED display much like the V2. Of course there are some different colors of which I received the Gleamy Gray which I find very attractive.





WHAT’S IN THE BOX?

1EA XLIM PRO DEVICE

1EA XLIM TOP FILL CARTRIDGE .6 OHM

1EA XLIM TOP FILL CARTRIDGE .8 OHM

1EA LANYARD

1EA TYPE C CABLE

1EA USER MANUAL

SPECIFICATIONS:

SIZE: 11 X 25 X 14.3MM

CARTRIDGE CAPACITY: 2ML

SCREEN: .42” OLED DISPLAY

OUTPUT VOLTAGE: 3.2-4.2V

BATTERY TYPE: BUILT IN 1000MAH

CHARGING: TYPE C 5V/2A

FEATURES:

INITIAL THOUGHTS:

The packaging for the Xlim Pro is nice but simple. The front has a clear viewing window which I very much like. The Xlim Pro and Oxva names are printed in large text on the top and bottom. The version name and liquid capacity are listed in the upper right corner. In the middle is the statement “X-Treme Flavor” and they let you know that the cartridges are “Top Fill” and that there is a lanyard included. It’s a little more information than I’m used to seeing on the front of a sample box. The back side has the usual contents list, a statement giving some of the features and the company information on the bottom.

Once opened, the Xlim Pro device is found sitting in a white foam insert and a box sits to the right containing the spare .8 ohm cartridge, lanyard, charging cable, and user manual. I have to say that I really love the silver to black gradient effect on the mod. I know it looks pretty shiny in the picture below but does not show fingerprints for the most part. The OXVA logo is tastefully done near the bottom of the front side which also holds the display that I’ll cover in more detail later.

On the right side of the Pro is where the airflow adjustment is located. There are three holes with the top one being a little larger than the bottom two. There is a small knob that protrudes slightly to allow the user to comfortable adjust the airflow. It is a little stiff to prevent accidental adjustment when taking in and out of a pocket but not so stiff as to make it difficult to adjust.

The left side is where you will find the fire/adjustment button. The Pro can be activated by pressing the button or by using it in auto draw mode. The button can be locked so that it operates in auto draw mode only which I happen to prefer. To me the button placement is a little awkward due to the location. The button also is used to adjust the wattage and a few other functions that I will list out for you when I cover the display.

The USB-C charging port is rated at 5V/2A which is great and will allow the user to charge in about 30 minutes if you have the proper charging block. On the Pro, the charging port is located on the bottom of the device.

The pod opening on the Pro is pretty standard. There is a magnet on each outside edge that meets up with the magnets on the pods. Inside that are the two spring loaded contacts to power the coil and closer to the center is the raised airflow sensor for the auto draw. The large opening in the upper right hand corner leads down to the airflow adjuster located on the side of the Pro.

The .42” OLED display is clear and easily readable. It was a little difficult to get the pictures taken because it happens so fast but wanted to show you the screens it displays when you turn it on. I just thought they were kind of neat.

The display once turned on shows the following information.

• Set wattage
• Battery level indicator
• Lock/Unlock symbol depending on if you have the button locked
• Coil Resistance
• Puff counter

I had mentioned earlier that the fire button has many functions. The following are the number of presses required to operate each of the functions offered by the chipset in the Xlim Pro.

• Press the button 5X to turn the Pro on/off
• Press the button 3X and the display will flash. Once it is flashing you can press or hold the button to change the wattage setting.
• Press the button 4X to lock/unlock the fire button
• Press the button 2X to adjust the lighting affect. There are three modes. Default is the scrolling RGB display, next it just shows the battery level in one of three solid colors, or you can turn it off.
• Press the button 7X to reset the puff counter

The pods that come with the Pro are rated at .6 and .8 ohms. They are sealed pods and the coils are not replaceable. Oxva has basically taken the V2 pod and moved the fill port to the top side of the pod and are thus calling it a top fill. In my opinion this isn’t a true top fill. To me a top fill is where you can keep the device vertical and remove the mouthpiece to fill the pod. It is good that you no longer have to remove the pod to fill but to me it’s a bit awkward to fill and with the tinted pod it’s a little hard to see while filling if you are using a clear liquid like I was during testing. I would definitely keep a paper towel handy to wipe of the mouthpiece after filling.

The .6 ohm pod comes pre-installed and does have a safety seal over the contacts in order to prevent firing before filling the pod. It’s recommended to wait 5-8 minutes after filling before taking the first puff. Both pods have two magnets that hold them securely into the Pro as well as the two contacts and two fairly large airflow inlet holes.

Like I mentioned earlier, the bottom side fill port has been moved on to the upper side of the pod. I understand that they wanted to make a top fill pod but feel like it would have taken a full redesign to do it properly. Due to the shape of the pod it wasn’t practical to have a removable mouthpiece for top filling. I still have to hold the device at an angle when filling and need adequate light to see the liquid level while filling with the difference being that I don’t have to remove the pod in order to fill it in comparison of the prior versions of this pod. It is good that it is compatible with all of the Xlim pod devices besides the Xlim C.

FINAL THOUGHTS:

I really enjoyed testing the new Oxva Xlim Pro. With the new added features of the “top fill” cartridges and light bar, I feel like there were enough changes to justify a new version of the Xlim. I understand that they tried to keep the cartridges the same so they would be cross compatible with other Xlim devices but feel like at some point that a redesign needs to happen in order to produce what I consider to be a real top fill cartridge without a rubber plug.

I started out by testing the .6 ohm cartridge. I decided to go with a guava green tea recipe that I like very much. The Xlim sensed the cartridge resistance and gave a preset wattage which I turned down to 20 watts. Even at that the vapor was a little warm at first for me even with the airflow control wide open. Once the coil was broken in then it leveled out and was very enjoyable with very good flavor and vapor production. At around 330 puffs the battery indicator was still blue but could tell the battery was getting weak so recharged and switched out to the .8 ohm pod.

The .8 ohm pod also produced very good flavor and vapor. The Pro recognized the resistance and preset the wattage to 16 watts. I was very comfortable with this setting and continued to use this pod the entire time at that setting. I feel like the battery management was very good with both pods and got more puffs on the counter than I thought I would. I was able to do anywhere from an RDL to a tight MTL with either pod.

I’d like to thank Oxva and Jade for sending the Xlim Pro Pod Kit for this review. I really enjoyed this one and would recommend it to others looking for a multi feature pod device. Thanks as always to the readers. I appreciate you taking the time to check out my reviews. Below is a link to the Oxva website for your viewing pleasure.

Xlim Pro – OXVA

Hey guys,

Quick question if i want good performance fast ramping coils for regulated mods i want thinner coils right?
I see here 26gx2 + 40g ,outer is 40g so these are thin?
Are these good for regulated or are they more for mechs?
Or do i need a coil with both thin inner and outer diameter?
Something like 30gx2 + 38g?
What kind of coils work best for regulated?
Im looking at Wotofos dual fused clapton .38 comes out at .19-.20 dual coils which i want but is 26gx2 + 40g these are good?
I also see 30gx2 + 38g but resistance is higher not sure what will perform better...
Any advise?

Does anyone in Sydney Australia use the endura t20 S

The thing is is it didn't work for me.

I have 3 vaporisers and 30 replacement coils Available. Can meet you for coffee somewhere near the cbd.

Any reasonable offer accepted.

Ps there are no cables.

I am looking for any Bridges, rba, and billet tanks. Can pay Paypal

So I started getting into vaping about 7 years ago and basically quit smoking for a year but ended up ditching it and going back to smoking until I got a disposable a few months ago and quit smoking.

now I use Vaporesso Zero S and I ordered XROS 3 from China, it still hasn't arrived but it looks like more of the same to me.

I'm starting to have second thoughts about these pod systems after using the Zero S.

It's leaking a lot and spitting juice all the time, and I understand it's fairly common with these devices.

I really just want something that works and doesn't need constant maintenance like after every 3 puffs, It's not an RDA.

I still have an Eleaf iStick 100W (120W) and iStick Pico, can I use them or are they considered obsolete for some reason?

and if so what mod do you recommend checking?

What atomizers do you recommend?

I'm looking for an RDL leak-proof, smooth without spitting vape. I'm currently using 20 mg salt nic but I find it hard to believe I will be enjoy vaping 20 mg freebase so really not sure what I need and I'll appreciate any help you can provide.

First time using Lost Vape. I bought the Cyborg Quest December 2022 and this (Pic below) its what it looks like now. I bought it from Element Vape.
I have never left my house with the device its always been in my room. Paint just pealed off. But the worst part is that the device is failing badly. If I press the fire button and say I have wattage set at 35.5 it will drop down to 5w and not hit properly, the only solution? Smack it hard on its side a couple of times lol and it will start working fine again until it decides to break again.

Overall I would not buy Lost Vape again just based on my first personal experience. The old Swag 2 I had was a tank compared to this device.

So finally I got the juice and atomizer I wanted.

Cutting short here, did build an mtl coil from 0.2*0.4 Ni80 ribbon wire, 2,5 ID about 5-6 twists, came out @ 1ohm, used vampire vape heisenberg 4 shots of 20mg 50/50 nicsalt, 10mg VG and 40mg PG, end result 30VG/70pg 8mg nic strenght, used the second biggest airflow, I think it was 2,1mm airflow pin, coil was placed fairly high, 2-3mm from ariflow, smoked at 17,5W on thelema solo, battery boost was on soft, wicking normal organic shoelace, smashed in the whole lot.

I will keep on experimenting and post it here when I make some kind of spectacular discovery, but atm this thing is saving my money, juice batteries and nerves and making me totally enjoy vaping like never before.

Damn, the vape I got out of the thing.....this is definitely something special, it was really spectacular, been vaping for a year almost, can't say I expected to encounter something like this.

If I ever choose MTL over DL, then this is definitely the case, it's really awsome, this has become my main vape now, DL machine is a backup, when I need a fast fix of nic and ain't got the time to njoy.

All best to you, hope it helps if anyone want to transist from DL to MTL, considering flavour, man this thing rocks your socks off, want to lay back, enjoy a good old and well aged whiskey and vape away my troubles into oblivion and truly enjoy life.

Super happy atm, wont try any other mtl if I am not getting it for free.

What is the Disposable vape?

An disposable vape that is meant to be used just once before being thrown is known as a onetime use vape. A heating element, a battery, and a small, pre-filled e-liquid tank or coil are included of this. The user simply disposes of the old device and buys a new one once the e-liquid has been used up, the battery is dead, or the device itself stops working.

Since disposable vapes don't need to be maintained or refilled, they are frequently promoted as a practical and simple-to-use alternative to traditional e-cigarettes. However, because they contribute to the expanding issue of electronic waste, they have recently been under attention due to worries about their effects on the environment.

To remove the disposable vape from its container, take off any protective covers or caps, and inhale through the mouthpiece. While some disposable vapes' heating elements are turned on automatically as you inhale others vape need to touch a button.

Note that there are potential health concerns associated with disposable vapes, just like there are with other vaping products. These devices may release aerosols that contain toxic substances and hazardous compounds, such as heavy metals, formaldehyde, and acrolein. Additionally, some disposable vapes' sweet tastes and vibrant designs can appeal to younger users, which is a worry for institutions like schools and groups that work to keep kids from getting access to nicotine products.

If you are interested in using vaping as a smoking cessation aid or alternative, it is recommended that you purchase reputable and safe vaping products from a licensed and regulated retailer. Additionally, it is important to consult with a healthcare professional before using any nicotine or tobacco products.

Hi I have just got the pioneer insider as I've had great success with the pioneer v1 and v1.5 I'm having trouble getting the best flavour from the insider, can anyone help me with things such as coil height? I think I got the wicking down as I don't get dry hits there is flavour but not as much as I get with the v1.5 any advice is appreciated thanks.

The Geekvape Wenax Q Pod can give user-experience-based designed pod system brings extraordinary vape experience with a precise 3-level airflow control, an all-day battery use and a more intuitive device control with an HD OLED display,it allows you to operate and monitor your vaping data. The Kit boasts a 1000mAh internal battery with 25W output, compatible with a 2ml Geekvape Q pod cartridge, which features a top filling system. Along with its three-hole airflow control and adjustable output, do enjoy a dense cloud and strong flavor with either Nic-salts or Freebase at your will.

Features:
1. Compatible with 2ml Geekvape Q Pod Cartridge
2. Built-in 1000mAh battery
3. 5-25W output
4. HD OLED screen
5. Button ignition and auto draw
6. Airflow control
7. Top filling system
8. Both for MTL and RDL
9. Security protection


Click here for more:
Geekvape Wenax Q Pod System Kit: Geekvape Wenax Q Kit

Ever wondered where to buy cart batteries? Search no more! Explore our wide range of reliable and stylish cart batteries at 510 Thread Battery and find the perfect match for your oil vaping needs.

Introducing the Zovoo Dragbar 5000, the ultimate game-changer in the world of disposable vapes! With a colossal 5000 puffs, say goodbye to frequent recharges and let the flavor extravaganza begin. Don't miss out on this vaping revolution!

Step back in time with the new Hyde Retro Series, where classic flavors meet modern vaping technology. Curious about how long does a hyde take to charge? Check out our comprehensive review at Hyde Flavors Blog and enjoy a blast from the past!

Yes I am doing this again. The first Recipes for Dummies thread lasted six years and nearly 1000 posts before it finally died out about a year ago. Over 200 recipes were posted, and here is a link to the most basic 150 or so ;

The Most Basic "Recipes for Dummies"

So Let's Try This Again ! Looking for the most basic e-liquid recipes for newcomers and people with active lifestyles. I would ask that anyone who posts here PLEASE limit your posts to recipes that contain four or fewer flavors, and no decimal points. Again, this is for your most basic recipes to share with newcomers and people who lead active lives. And hopefully we can help someone find their next great vaping experience !
It would be helpful, but not necessary, if you specify MTL or DTL recipe.
Here are a few favorites I developed over the course of the previous thread :

BUTTER MEL
Butterscotch (FW) 5%
Caramel (TFA) 3%
Vanilla Bean Gelato (TFA) 2%
EM (TFA) 1%

BLADE RUNNER
Shisha Vanilla (INW) 8%
Creme de Menthe (TFA) 2%

HONEY NUT TOBACCO
555 DK Tobacco (TFA) 5%
Honey (TFA) 2%

DEVIL'S FOOD CAKE
Yellow Cake (FW) 5%
Double Chocolate Clear (TFA) 4%
Caramel (TFA) 3%
DX Bavarian Cream (TFA) 3%

Here is a link to the original thread ;

Recipes for Dummies

And here are is a partial Glossary of Vendor references ;

CAP - Capella Flavors
CF - Chef's Flavors
CNV - Chemnovatic
FA Flavour Art
FLV - Flavorah
FS - Flavor Shack
FW Flavor West
HA - Hangsen
INW - Inawera Flavors
JF - Jungle Flavors
LOR - Loranns Flavors
MF - Medicine Flower
MB - Molin Berry Flavors
OOO - One On One Flavors
OS - One Stop Flavors
PUR - Purilum
SF - Seedman Flavors
SSA - Sobuckys Super Aromas
TFA - The Flavor Apprentice
VSO
VTA - Vape Train Australia
WF - Wonder Flavors

For sale is a Dani Box 21700.
Colour: Titan Grey.
Original Leather Sleeve: Brown

Condition: apart from the usual atty marks, it is in an immaculate condition. Never left the house and never been used outside of its sleeve. Comes in its original box.

RRP: bought from Creme de Vape for GBP 244.95 + 44.95 + 8.95 shipping = GBP 298.85

Want $220 for both the Dani Box and the OG leather sleeve. This includes shipping from the UK. If using PayPal, please add PP fees.

Shipping will be via Royal Mail tracked, signed and insured (according to their website takes between 5 - 7 working days).

The Hero Bar is a rechargeable vape device that packs a punch with 8000 puffs. It's perfect for those who want a long-lasting device without having to constantly change batteries or refill their e-juice.

Get ready for an explosive vaping experience with Monster Bars Max. With an impressive 6000 puffs, this vape bar is perfect for those who want a long-lasting, intense flavor. The device is pre-filled with e-juice, making it easy to use and perfect for on-the-go. Enjoy the frozen flavor of Monster Bars Max and experience the ultimate vaping satisfaction.

LUXE XR Max Kit is the new Pod Mod in LUXE X family with 80W max power. With 2800mAh ultra-high density battery, it is not only much mightier, but also compact enough to empower you through a whole day for DTL vaping. Powered by AXON Chip, LUXE XR Max features an easier-than-ever user interface with smart touch buttons, and you can fire the button to adjust wattage, to confirm, to enter menu. In addition, It can recognize the coil resistance, recommend you the best wattage and even limit the wattage to its max to prevent burnt taste. Vaporesso LUXE XR Max Kit is compatible with LUXE X/XR Pods and GTX Coils fully. The unique morph-mesh structure and fluffier COREX cotton will provide more even heating and faster liquid delivery. There is no need for you to worry about leaking and messing with the design of SSS Tech. It provides vaping experience from MTL to DTL. The pod capacity is 5ml. Energetic breathing lights can shine through crystal clear design, which makes LUXE XR Max a combination of futuristic design and trendy style.

Vaporesso LUXE XR Max Kit Giveaway, 1 winner, ends on Apr. 20th, 2023

Enter here

The SMOK Nord C Kit is a brand-new vape device with a 1800mAh internal battery, a 5-50W output range,bringing you strong power to your satisfaction.It is connected with a 4.5ml Nord C pod, and is compatible with RPM 2 coil platform. Constructed from zinc alloy, it gives a premium feel.

Inspired by a classic Nord appeal, the vape kit is equipped with a versatile 0.69-inch OLED screen at the side, it utilizes a button-activated firing mechanism for wattage adjustment. Coupled with its airflow switch and RPM 2 coil series, it serves both MTL and RDL vaping experience.

Thanks to continuous optimization and stable iterations, the device has superior performance . What is more, the pod kit features a variety of colors and premium textures to match your mood of the day. Innovation keeps changing the vaping experience! You could go to vape online store to have a try.

Maybe you also like:
Cube Zero Disposable Vape Kit
Geekvape Sonder Q Pod Kit

Dear valued customers,

The brand new April is here, also the Easter. So Healthcabin new round of promotion – April Sale 2023 is ready, with 3 vape deals in total. Take the chance to join us and save more on your favorite products!

A. 15% OFF Sitewide​

We’ve created a 15% OFF discount coupon code, which is available for your whole order. Let’s check it out!

Coupon info:

• Coupon code: EASTER
• Date: 7th – 21st Apr, 2023(-0600 GMT)
• Retail Only
• Flash Sale products excluded

B. Giveaway – Free New Vapes​

We are now partnering with Vaporesso to giveaway the Xros 3 Nano Kit with 10 winners in total. Ends on 10th Apr. If you don’t want to buy right now, why not try your luck and win free vapes? Click here to join and win!

Prizes:

• Vaporesso XROS 3 Nano Pod Kit – 10 Winners

*One of the colors will be shipped out randomly if you are lucky to win!

C. Vape Deal Links​

Here are some other useful links where you can find our best deals:

• Weekly Sale – Best price for new hot vapes with 17% OFF Coupon: WSHC
• Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!