-
Locked
Wotofo Zetta 5000 Disposables Review
- By Jen Bee
- Device Reviews
- 0 Replies
Wotofo Zetta 5000 Disposables Review
Wotofo are back again with a new disposable vapes line: the Zetta 5000!
These devices were sent to me by Wotofo for review purposes (thank you, Cara!).
In the past year or so, it has seemed like that new disposable e-cigarettes or even new manufacturers of it crop up on a daily basis. There’s sooooo many of them now, and “old school” vape hardware producers have gotten in on the action too. Some have even formed subsidiaries or sister companies that appear to be dedicated to the design the product of disposable vapes.
Wotofo have released a fair few, and I have had the privilege of reviewing some of them. The Zetta 5000 though is a bit different from their other disposable vape offerings and indeed from its competition too, and we shall dive down into what the Zetta 5000 is all about in this review.
My review will be from my own experience of using these devices in everyday life as a regular vaper.
Quick specs:
- 108 x 29 mm. It’s a short and fat cylinder, basically resembling a sausage!
- 550 mAh battery
- Made from aluminium alloy and food-grade PC.
- Having a 1.2 ohms mesh coil with nexMESH Tech.
- A generous 13mL of e-liquid volume, and claims to have a 5000 puff-life (hence the “5000” in the name).
- Has a USB-C port for charging at its bottom.
- Available in 12 flavours and in various nicotine levels.
Kidding aside with the sausage likeness, its form factor is actually very comfortable in the hand. All surfaces are smooth, from the mainly plastic shell to the metal bottom. There is a unique, almost splashed, design printed all the transparent shell, and underneath this outer shell you will find the branding in the usual big Wotofo font plus the flavour name on the side.
The transparent shell also serves to enhance the LED lighting effects that feature on the Zetta 5000. These LED lights illuminate when vaping and also when charging. The LED pattern is that of flashes of changing colours all around the device, with the flashing speed not too fast or too slow. It is also not too bright to call out unwanted attention; so all in all, quite a quirky addition to an already pleasing-to-the-eye device.
The mouthpiece is of a flat shape that is very comfortable on the lips. And the charging port at the base of the device does mean that you cannot charge this upright, but it does charge quickly enough so that it won’t be on its side for too long.
With the battery size, e-liquid capacity, and having actual metal components to it, it is quite understandable that the Zetta 5000 weighs a tad heavier than your run-of-the-mill disposable vapes. But that’s not to say it’s heavy- you won’t really notice its weight when pocketed.
It’s a simple pull and puff type of device which is very responsive. It doesn’t have any airflow control or other extra features for customisation which makes for easy operation. The draw from it is a medium MTL draw in my opinion, giving a surprisingly warm-ish vape despite the high resistance coil installed.
Of the available flavours of the Zetta 5000, I have been sent these: Watermelon Ice Cream, Watermelon Cantaloupe Honeydew, Grape Ice, Mango Ice Cream, and Blueberry Raspberry Ice. They all taste quite nice, with punchy flavour and strong sweetness. One thing I did notice, particularly with the Watermelon Cantaloupe Honeydew, is that in some puffs, the vape can feel a little “dry”. Maybe that’s just me, but it’s not really a con for me as it doesn’t happen consistently enough.
Otherwise, the fruit-based flavours taste of fresh fruits, intensified by the added juiciness and sweetness. The Ice Cream flavours really do have a milky base to the taste which mixes nicely with the fruit component.
All in all, the Wotofo Zetta 5000 is a decent disposable e-cigarette which gives a very satisfying vape. It offers a good selection of flavours and is very easy to use, especially on-the-go. With its relatively high e-liquid capacity and recharging capabilities, it makes for a cost-effective solution for avid users of disposable vapes (but please always dispose of your used vapes responsibly!).
My sincerest thanks again to Wotofo for allowing me to review these products!
Wotofo are back again with a new disposable vapes line: the Zetta 5000!
These devices were sent to me by Wotofo for review purposes (thank you, Cara!).
In the past year or so, it has seemed like that new disposable e-cigarettes or even new manufacturers of it crop up on a daily basis. There’s sooooo many of them now, and “old school” vape hardware producers have gotten in on the action too. Some have even formed subsidiaries or sister companies that appear to be dedicated to the design the product of disposable vapes.
Wotofo have released a fair few, and I have had the privilege of reviewing some of them. The Zetta 5000 though is a bit different from their other disposable vape offerings and indeed from its competition too, and we shall dive down into what the Zetta 5000 is all about in this review.
My review will be from my own experience of using these devices in everyday life as a regular vaper.
Quick specs:
- 108 x 29 mm. It’s a short and fat cylinder, basically resembling a sausage!
- 550 mAh battery
- Made from aluminium alloy and food-grade PC.
- Having a 1.2 ohms mesh coil with nexMESH Tech.
- A generous 13mL of e-liquid volume, and claims to have a 5000 puff-life (hence the “5000” in the name).
- Has a USB-C port for charging at its bottom.
- Available in 12 flavours and in various nicotine levels.
Kidding aside with the sausage likeness, its form factor is actually very comfortable in the hand. All surfaces are smooth, from the mainly plastic shell to the metal bottom. There is a unique, almost splashed, design printed all the transparent shell, and underneath this outer shell you will find the branding in the usual big Wotofo font plus the flavour name on the side.
The transparent shell also serves to enhance the LED lighting effects that feature on the Zetta 5000. These LED lights illuminate when vaping and also when charging. The LED pattern is that of flashes of changing colours all around the device, with the flashing speed not too fast or too slow. It is also not too bright to call out unwanted attention; so all in all, quite a quirky addition to an already pleasing-to-the-eye device.
The mouthpiece is of a flat shape that is very comfortable on the lips. And the charging port at the base of the device does mean that you cannot charge this upright, but it does charge quickly enough so that it won’t be on its side for too long.
With the battery size, e-liquid capacity, and having actual metal components to it, it is quite understandable that the Zetta 5000 weighs a tad heavier than your run-of-the-mill disposable vapes. But that’s not to say it’s heavy- you won’t really notice its weight when pocketed.
It’s a simple pull and puff type of device which is very responsive. It doesn’t have any airflow control or other extra features for customisation which makes for easy operation. The draw from it is a medium MTL draw in my opinion, giving a surprisingly warm-ish vape despite the high resistance coil installed.
Of the available flavours of the Zetta 5000, I have been sent these: Watermelon Ice Cream, Watermelon Cantaloupe Honeydew, Grape Ice, Mango Ice Cream, and Blueberry Raspberry Ice. They all taste quite nice, with punchy flavour and strong sweetness. One thing I did notice, particularly with the Watermelon Cantaloupe Honeydew, is that in some puffs, the vape can feel a little “dry”. Maybe that’s just me, but it’s not really a con for me as it doesn’t happen consistently enough.
Otherwise, the fruit-based flavours taste of fresh fruits, intensified by the added juiciness and sweetness. The Ice Cream flavours really do have a milky base to the taste which mixes nicely with the fruit component.
All in all, the Wotofo Zetta 5000 is a decent disposable e-cigarette which gives a very satisfying vape. It offers a good selection of flavours and is very easy to use, especially on-the-go. With its relatively high e-liquid capacity and recharging capabilities, it makes for a cost-effective solution for avid users of disposable vapes (but please always dispose of your used vapes responsibly!).
My sincerest thanks again to Wotofo for allowing me to review these products!
-
Locked
-
Solved
How many mods do I need for a car ride??? Test Thread #2
- By ShowMeTwice
- General Vaping Discussion
- 29 Replies
I am taking a joy ride and don't know how many mods I should take. I don't do pods!!! 
Do I need backup for my squonker??? And should I take a backup for the backup???
How much juice should I take with me???
Guess I should take some extra batteries too???
Not sure how long this ride will be yet!
So... it could be a short or a long ride.
Ummm, I was married for nearly 40 years and that's the kind of thing she would do. "We're going for a short ride to one store". Lol, famous last words after being out for hours and 6 stores later!
Ok, on the serious side, this is a TEST to see how long it takes for XF up/down voting options to show up.
@UncleJunkle has another thread going but because solutions were found and then unsolutioned we don't know if that may have confused the all powerful XF.
So, please, answer my questions with the goofiest answers you can think of!!!
I'll just let the thread sit to see when up/down voting comes into play.
@classwife can delete the thread once we know what we need to know.
Do I need backup for my squonker??? And should I take a backup for the backup???
How much juice should I take with me???
Guess I should take some extra batteries too???
Not sure how long this ride will be yet!
So... it could be a short or a long ride.
Ummm, I was married for nearly 40 years and that's the kind of thing she would do. "We're going for a short ride to one store". Lol, famous last words after being out for hours and 6 stores later!
Ok, on the serious side, this is a TEST to see how long it takes for XF up/down voting options to show up.
@UncleJunkle has another thread going but because solutions were found and then unsolutioned we don't know if that may have confused the all powerful XF.
So, please, answer my questions with the goofiest answers you can think of!!!
I'll just let the thread sit to see when up/down voting comes into play.
@classwife can delete the thread once we know what we need to know.
-
Locked
-
Solved
How many clicks to turn on/off most vape devices? Test Thread #1
- By UncLeJunkLe
- General Vaping Discussion
- 35 Replies
-
Locked
Kumiho V (5) // Review by HyDrOpOnIc1987
- Device Reviews
- 0 Replies
Kumiho V (5) // Review by HyDrOpOnIc1987
Hello and thank you for stopping by to read another review by, well uh, me of course! Today's device is the Kumiho V or 5 and was sent to my by Health Cabin for the purpose of a fair and honest review. I'm hoping to showcase just that in today's review. First I'll show some promotional images and then tell you about the features and specifications of this device. Lastly, I will unbox, assemble and use this device and tell you the highlights of my time with this device. So without further adieu, let's get to it.
Promotional Images, Features, Specifications and Contents of Box
Features:
1. Build-in 600mAh battery
2. 2ml refillable empty transparent pods: 0.6ohm & 1.0ohm
3. Patented coil cotton design for 0.6ohm pod for quick eliquid transmission
4. Innovative vibration interaction when the pod connected
5. Super easy to use with auto draw
6. Adjustable airflow for accurate RDL & MTL vaping
7. Pre-filled pods are also available, sold separately
8. USB C charging port
Specifications:
Brand: Kumiho
Unit: 1 Set
Materials: Aluminium Alloy, PCTG
Size: 119mm*22mm*11.5mm
Color: Black, Blue, Red, Gunmetal, Pink Gold
Battery capacity: 600mAh
Output wattage: 18W max
Pod capacity: 2ml
Pod resistance: Meshed 0.6ohm(14-18W), Dual Coil 1.0ohm(11-13W)
Package: Box
Contents of Box:
1pc Kumiho Model V Device
1pc Model V Empty Pod 0.6ohm (14-18W)
1pc Model V Empty Pod 1.0ohm (11-13W)
1pc User Manual
Unboxing, Assembly and Usage Highlights:
The packaging for this device is actually pretty nice. It’s a box, obviously, but has a paper sleeve over it which is red and stylized. Kumiho, the branding, is embossed in gold. There’s the picture of the device, but also the model name in a glossed font along the right side. Pretty stunning, but red is my favourite colour.
On the left side of the sleeve it says Model V in the same glossy font. The back of the sleeve has all the pertinent information: a description of the device and is use, 6 “icons” and their explanations describing the features of the device, the package contents, the contact information for the brand and last but not least is a warning to “KEEP OUT OF REACH OF CHILDREN”. Oh, and also that it’s made in China.
The box itself is pretty plain. White with the brand and model name in beige font. Tada.
Inside the box is where everything lives. There’s a sleeve that houses the manual, a spot to write down your purchasing information for warranty purposes, as well as more of the same information about the device itself. Then in the box you have the device and 2 pods, one 1.0 ohm and one 0.6 ohm.
Because it’s a pod device, I didn’t have to go wash it with soap and water and a tooth brush, I just used a sanitizer wipe and then wiped it off with a moist paper towel. Now that the mouthpiece is clean, I put my eliquid in the pod. The pods have a silicone plug that you have to pull out, and its on the side but near the bottom of the pod. In the 2 weeks I’ve had this device though, it hasn’t had a leak an the plug has held strong after multiple refills. Also, the hole is big enough that air can pass by the side of the nipple thing on my 60ml and 120ml chubby gorilla bottles, so that’s a definite plus. Zero issues when filling. I let the pod sit for about 20 minutes, just to be safe.
When i put the pod in, there was a vibration. Haptic feedback. And the pod clicks into place pretty satisfyingly. It has 2 magnets, but there are also a couple notches that link into place and clicks along with the vibration to let you know it’s seated properly.
On the side of the device is a little switch or lever and it controls the airflow. To be honest, I didn’t feel too much of a difference between it full open and full closed. It is not really a MTL device. I guess it can be, but its VERY airy. The draw was almost the same from both pods as well. The only difference I really noticed was in the way the liquid flowed through the pod. Weirdly enough, I found that my 50/50 10mg salt nicotine liquid would flood the 1.0 ohm pod very quickly, while when I used 70/30 6mg freebase liquid in the 0.6ohm pod, it couldn't keep up. I emptied and put the same flavour of salt nicotine liquid in the 0.6 ohm pod and it still had a hard time keeping up. I had to make sure to take at least 20 second breaks between toots, sometimes more. The way these pods behaved made me wonder if they were perhaps mislabeled and should have been reversed? I don't know lol. But I did get the 1.0 ohm pod to work well with freebase nicotine liquid. The flavour and vapour production was amazing and on point. I just wish they behaved properly and that the 0.6ohm coil would work right at all.
The restriction on the draw is identical between the pods. If you set the airflow and switch between the two, it will seem the same unless you have different liquids in them. The battery on the device lasts quite a while though, it took me 3 full days of use to kill it. So that is DEFINITELY a plus. The device is fairly nice looking but it also can't stand up right, the bottom, which it where the charge port is, is rounded (probably to protect the port) and wont let it stand up. It will fall to either side when you try to stand it up right.
The device is pretty awesome when the pods work as they should. I hope that they work on the 0.6 ohm pod some more and perhaps check to see if the pods were mislabled and reversed.
I would like to thank Health Cabin for sending me this device to review. It’s a very nice device if you stick to the 1.0 ohm pods. I would recommend this device to those who like a restricted DTL pod with minimal airflow control.
Here is a link to pick it up from Health Cabin.
Kumiho Model V Pod Kit
Thank you for reading this review, I hope you found it informative and somewhat pleasant to read. Hope you all have a good one, and try to stay out of trouble if you can. But a little trouble is fun!
Cheers!
Hello and thank you for stopping by to read another review by, well uh, me of course! Today's device is the Kumiho V or 5 and was sent to my by Health Cabin for the purpose of a fair and honest review. I'm hoping to showcase just that in today's review. First I'll show some promotional images and then tell you about the features and specifications of this device. Lastly, I will unbox, assemble and use this device and tell you the highlights of my time with this device. So without further adieu, let's get to it.
Promotional Images, Features, Specifications and Contents of Box
Features:
1. Build-in 600mAh battery
2. 2ml refillable empty transparent pods: 0.6ohm & 1.0ohm
3. Patented coil cotton design for 0.6ohm pod for quick eliquid transmission
4. Innovative vibration interaction when the pod connected
5. Super easy to use with auto draw
6. Adjustable airflow for accurate RDL & MTL vaping
7. Pre-filled pods are also available, sold separately
8. USB C charging port
Specifications:
Brand: Kumiho
Unit: 1 Set
Materials: Aluminium Alloy, PCTG
Size: 119mm*22mm*11.5mm
Color: Black, Blue, Red, Gunmetal, Pink Gold
Battery capacity: 600mAh
Output wattage: 18W max
Pod capacity: 2ml
Pod resistance: Meshed 0.6ohm(14-18W), Dual Coil 1.0ohm(11-13W)
Package: Box
Contents of Box:
1pc Kumiho Model V Device
1pc Model V Empty Pod 0.6ohm (14-18W)
1pc Model V Empty Pod 1.0ohm (11-13W)
1pc User Manual
Unboxing, Assembly and Usage Highlights:
The packaging for this device is actually pretty nice. It’s a box, obviously, but has a paper sleeve over it which is red and stylized. Kumiho, the branding, is embossed in gold. There’s the picture of the device, but also the model name in a glossed font along the right side. Pretty stunning, but red is my favourite colour.
On the left side of the sleeve it says Model V in the same glossy font. The back of the sleeve has all the pertinent information: a description of the device and is use, 6 “icons” and their explanations describing the features of the device, the package contents, the contact information for the brand and last but not least is a warning to “KEEP OUT OF REACH OF CHILDREN”. Oh, and also that it’s made in China.
The box itself is pretty plain. White with the brand and model name in beige font. Tada.
Inside the box is where everything lives. There’s a sleeve that houses the manual, a spot to write down your purchasing information for warranty purposes, as well as more of the same information about the device itself. Then in the box you have the device and 2 pods, one 1.0 ohm and one 0.6 ohm.
Because it’s a pod device, I didn’t have to go wash it with soap and water and a tooth brush, I just used a sanitizer wipe and then wiped it off with a moist paper towel. Now that the mouthpiece is clean, I put my eliquid in the pod. The pods have a silicone plug that you have to pull out, and its on the side but near the bottom of the pod. In the 2 weeks I’ve had this device though, it hasn’t had a leak an the plug has held strong after multiple refills. Also, the hole is big enough that air can pass by the side of the nipple thing on my 60ml and 120ml chubby gorilla bottles, so that’s a definite plus. Zero issues when filling. I let the pod sit for about 20 minutes, just to be safe.
When i put the pod in, there was a vibration. Haptic feedback. And the pod clicks into place pretty satisfyingly. It has 2 magnets, but there are also a couple notches that link into place and clicks along with the vibration to let you know it’s seated properly.
On the side of the device is a little switch or lever and it controls the airflow. To be honest, I didn’t feel too much of a difference between it full open and full closed. It is not really a MTL device. I guess it can be, but its VERY airy. The draw was almost the same from both pods as well. The only difference I really noticed was in the way the liquid flowed through the pod. Weirdly enough, I found that my 50/50 10mg salt nicotine liquid would flood the 1.0 ohm pod very quickly, while when I used 70/30 6mg freebase liquid in the 0.6ohm pod, it couldn't keep up. I emptied and put the same flavour of salt nicotine liquid in the 0.6 ohm pod and it still had a hard time keeping up. I had to make sure to take at least 20 second breaks between toots, sometimes more. The way these pods behaved made me wonder if they were perhaps mislabeled and should have been reversed? I don't know lol. But I did get the 1.0 ohm pod to work well with freebase nicotine liquid. The flavour and vapour production was amazing and on point. I just wish they behaved properly and that the 0.6ohm coil would work right at all.
The restriction on the draw is identical between the pods. If you set the airflow and switch between the two, it will seem the same unless you have different liquids in them. The battery on the device lasts quite a while though, it took me 3 full days of use to kill it. So that is DEFINITELY a plus. The device is fairly nice looking but it also can't stand up right, the bottom, which it where the charge port is, is rounded (probably to protect the port) and wont let it stand up. It will fall to either side when you try to stand it up right.
The device is pretty awesome when the pods work as they should. I hope that they work on the 0.6 ohm pod some more and perhaps check to see if the pods were mislabled and reversed.
I would like to thank Health Cabin for sending me this device to review. It’s a very nice device if you stick to the 1.0 ohm pods. I would recommend this device to those who like a restricted DTL pod with minimal airflow control.
Here is a link to pick it up from Health Cabin.
Kumiho Model V Pod Kit
Thank you for reading this review, I hope you found it informative and somewhat pleasant to read. Hope you all have a good one, and try to stay out of trouble if you can. But a little trouble is fun!
Cheers!
-
Locked
VOOPOO Argus XT Kit | Argus XT Box Mod
- By Ema
- Sourcemore
- 0 Replies
VOOPOO Argus XT Kit
Argus XT Kit is composed of Argus XT Mod and Matt Tank New. Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Matt Tank New features 6.5ml capacity and easy top filling system. It adopts volcano crater structure to prevent leakage and two-way airflow for easy deep DL vaping. Compatible with VOOPOO TPP Coil, it can bring you authentic vaping experience. By adopting the Dual In One Tech 2.0 mesh coils, it also can offer fuller, more delicate and multi-layered clouds.
Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. 6.5ml e-juice capacity, easy top filling system
9. Adopts volcano crater structure to prevent leakage
10. Two-way airflow for easy deep DL vaping
11. Dual In One Tech 2.0 mesh coils with denser flavor and longer lifespan
12. Compatible with VOOPOO Maat Tank New and all TPP Coils
13. Seven safety protections to guarantee the safe use
VOOPOO Argus XT Box Mod
Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Argus XT Mod is compatible with VOOPOO Maat Tank New PP-X Pod Tank, and all TPP Coils.
Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. Fit for Maat Tank New, TPP-X Pod Tank and all TPP Coils
9. Seven safety protections to guarantee the safe use
Argus XT Kit is composed of Argus XT Mod and Matt Tank New. Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Matt Tank New features 6.5ml capacity and easy top filling system. It adopts volcano crater structure to prevent leakage and two-way airflow for easy deep DL vaping. Compatible with VOOPOO TPP Coil, it can bring you authentic vaping experience. By adopting the Dual In One Tech 2.0 mesh coils, it also can offer fuller, more delicate and multi-layered clouds.
Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. 6.5ml e-juice capacity, easy top filling system
9. Adopts volcano crater structure to prevent leakage
10. Two-way airflow for easy deep DL vaping
11. Dual In One Tech 2.0 mesh coils with denser flavor and longer lifespan
12. Compatible with VOOPOO Maat Tank New and all TPP Coils
13. Seven safety protections to guarantee the safe use
VOOPOO Argus XT Box Mod
Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Argus XT Mod is compatible with VOOPOO Maat Tank New PP-X Pod Tank, and all TPP Coils.
Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. Fit for Maat Tank New, TPP-X Pod Tank and all TPP Coils
9. Seven safety protections to guarantee the safe use
-
Locked
Hyde Retro Rave Rechargeable Disposable Kit 5000 Puffs
- Newvaping
- 0 Replies
Illuminate any room with the brand new Hyde Retro RAVE Edition. The Retro RAVE is a rechargeable disposable device that features an LED Light that can be turned on or off with the quick click of the button, discreetly located on the bottom of the device.
FLAVORS:
FLAVORS:
- Aloe Grape – Aloe | Grape
- Bananas & Cream – Banana | Cream
- Blue Razz Ice – Blue Raspberry | Menthol
- Brazmallows – Blue Raspberry | Marshmallow
- Cola Ice – Cola | Menthol
- Energize – Energy Drink
- Loops – Fruit Cereal | Milk
- Minty O’s – Sweet Mint | Menthol
- Morning Brew – Coffee | Cream
- Peach Mango Watermelon – Peach | Mango | Watermelon
- Philippine Mango – Yellow Mango
- Pina Colada – Pineapple | Coconut
- Power – Green Energy Drink
- Sour Apple Ice – Green Apple | Menthol
- Strawberry Banana – Strawberry | Banana
- Strawberry Kiwi – Strawberry | Kiwi
- Summer LUV – Fruit Medley
- Tropical – Tropical | Gummy
- Blue Razz Clouds (NEW)
- Dragon Fruit Lemonade (NEW)
- Mango Peaches & Cream (NEW)
- Peach Lemon (NEW)
- Rainbow (NEW)
- Strawberry Lemon Lime (NEW)
- Watermelon Ice Cream (NEW)
- 5% Nicotine
- Liquid – 12mL
- Battery – 400mAh (Rechargeable)
- Rechargeable via Micro USB (Not Included)
- 5000 Puffs Per Device
-
Locked
VOOPOO ARGUS MT 100W KIT review by hittman
- By hittman
- Device Reviews
- 7 Replies
I know you may have just recently seen my review on the Argus XT and might wonder why I didn’t combine it with this review on the Argus MT. Well, Voopoo requested two reviews so that is what I’m doing. They have always been excellent to deal with so I don’t mind accommodating their requests. Now that I’ve explained that, let’s talk about the Argus MT. The MT is very similar to the XT but not identical. The MT has an internal 3000mah battery with a max of 100 watts where the XT uses an external battery. It is IP68 tri proof and has a 5v/3A fast charge rating like the XT. It also is powered by the Gene. TT 2.0 chipset and has Smart, RBA, Turbo, and TC functions. The MT kit comes with the same MAAT tank as the XT comes with so I will just copy that information from my previous review in case some didn’t read the other review.
WHAT’S IN THE BOX?
1* Argus MT Device
1* Maat Tank New 6.5ml
1* TPP-DM2 0.2ohm Coil
1* TPP-DM4 0.3ohm Coil
1* Type-C Cable
1* User Manual
1* Glass Container
1* Silicon Rubber Pack
SPECIFICATIONS:
Tank Size 26*52mm
Tank Capacity 6.5ml (standard)
Tank Materia Stainless Steel+Pyrex
Tank Resistance TPP-DM2 0.2ohm, TPP-DM4 0.3ohm
Kit Size 145*40*30mm/td>
Kit Material Leather+Zinc Alloy
Output Power 5-100W
Output Voltage 0-8.5V
Kit Resistance Range 0.05-3.0ohm
Charging Voltage Type-C 5V/3A
Battery Capacity 3000mAh built-in battery
Color Pearl White, Graphite, Carbon Fiber, Lime Green, Dark Blue
FEATURES:
1. 100W max power, 6.5ml capacity
2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof
3. Ingenious crater leakage proof structure
4. GENE.TT 2.0 chip, QS lock
5. Built-in 3000mAh battery
6. 3A Type-C fast charging port with dust-proof cover design
7. Holeless appearance, lanyard ring design
8. Two-way airflow brings easy deep DL vaping
9. Easy top filling design
10. Multiple modes: Smart, RBA, Turbo and TC
11. Compatible with all TPP coils
12. BMS real-time battery protection
13. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection
INITIAL THOUGHTS:
The packaging for the MT is exactly the same as the XT. It comes in a very nice metal tin with an outer sleeve slid over it. The sleeve has a color picture of the device contained inside. I received the white version. As a matter of fact it is so white that it made it a little difficult to photograph. I won’t be carrying this one at work since my hands get dirty and don’t want to transfer that to the mod.
Once opened, the MT mod is visible along with the MAAT tank, spare glass tank section, and accessory box all mounted inside a plastic insert. Inside the accessory box is a USB-C charging cable and the two included TPP coils. One is the TPP DM4 .3 ohm rated at 32-40 watts and the second coil is the same TPP DM2 .2 ohm coil rated at 40-60 watts as what came in the XT kit. Underneath the mod is a bag of o rings and seals.
There’s no battery adapter with this one since it has a built in 3000mah battery. It is rated at a charge rate of 3A. It does seem to charge fast but when it had about 50% battery when I received it, I plugged it into my Klein USB tester with my Geekvape fast charger and it wasn’t pulling anywhere near 3A.
The Argus MT has very little branding. The Gene TT name is printed on one side with nothing on the other. The leather like material on the back has the ARGUS MT name stamped into it with the mountain symbol above the name.
The 510 top plate is shaped like the mod just like the XT was. It will allow up to a 28mm tank. In the center of the connection is the gold plated and spring loaded center pin. This one also has the lanyard ring on one side. I don’t mind it as much on this one as it seems to give my finger something to rest against and this mod is lighter than the XT. Since the MT has a built in battery there isn’t a battery door on the bottom but instead is a rubbery grey insert. I’m guessing this is to keep it from sliding around on a table or desk.
The adjustment buttons on the MT are a rocker type switch much like the XT but are positioned horizontal instead of vertical and on the MT they are marked with a + and – symbol. The MT also has the flip down cover for the USB-C charging/update port for a seamless design. One thing I thought I might mention is if you do ever need to do an update then you need to use the included cable and it has a triangle on one side of the C connector. This triangle needs to face down in order to do the update.
The chipset and display are the same on the MT as they were on the XT but in case you didn’t get a chance to see my other review then here are the display and button/menu functions.
The display screen gives the following information.
SET WATTAGE
MODE OF OPERATION(SMART, RBA, TURBO, TC)
BATTERY LEVEL INDICATOR WITH PERCENTAGE DISPLAY
PUFF COUNTER
COIL RESISTANCE
OUTPUT VOLTAGE WHILE FIRING
LENGTH OF TIME OF CURRENT PUFF
Just like about every Voopoo mod that I remember trying, if you leave the MT sit for several minutes then go back to use it then you have to push the fire button twice to fire it. They have a built in safety so if it gets hit by accident once then it just wakes the mod up but doesn’t fire. I’m not a big fan of this feature but I understand why they do it.
The menu system for the XT and MT are the same and use the same Gene TT chipset. The menu and button operation are as follows.
Press the fire button five times to turn the mod on/off
Press the fire button and – button to do a puff counter reset if you don’t want to do it through the menu
Press the + and – buttons to enter the menu system where you can choose between Mode, Setting, About Device, and exit
In Mode selection you can choose between Smart, RBA, Turbo, or TC
In the Setting selection you can reset the puff counter, choose to adjust the screen brightness or change the display type
Each of the four modes is displayed in a different color.
Turbo = Red
Smart = Orange
RBA = Blue
TC = Green
One thing that is different on the MT is that the QS Lock switch is built into the bottom portion of the screen and only has two positions instead of three like the XT has. The left position has the mod unlocked and the right position locks the device.
Ok, in case you didn’t see the MAAT tank information on my other review, here it is again. The MT kit included a DM2 .2 ohm coil like the XT kit did but also came with a DM4 .3 ohm coil rated for 32-40 watts. I really like the DM4 coil for battery longevity.
As always, it’s definitely always a good idea to break down a tank as far as possible for cleaning so that’s what I did with the MAAT Tank. It comes with what I consider to be a very nice 810 drip tip with a stainless beauty ring on the bottom to match the tank. The o rings are on the tip on this one rather than inside the top cap. The top cap on this one is a little different than most bayonet style caps I’ve seen on most tanks where the center is how it locks in place. On the MAAT tank there is a lip sticking out on either side of the outside edge of the underneath side of the cap that locks onto the body of the tank with somewhere between 1/8 and ¼ of a turn. This can be seen in the second picture below.
The top of the fill ports is covered by a gasket with a small hole in each side. I know some people like these gaskets but I personally don’t. If you’ve ever tried to fill a tank with a gasket with a glass dropper then you know it makes quite the mess. However, I also use some 10 and 50ml dropper bottles that work fine with this type of fill system. The MAAT tank has a capacity of 6.5ml.
The TPP coils simply push into the bottom of the tank to seal and then the bottom cap that contains the airflow control is screwed on. The inside of the base has three gold plated contacts to help transfer the power from the mod to the tank. There is a complete range of TPP coils that can be used on the MAAT tank.
The airflow of the tank mimics the design of a volcano to prevent leakage. The actual airflow control on the base is rather different from other tanks I’ve seen. There are two metal sliders that protrude a little to make it easier to adjust the airflow. The two openings are quite wide and allow massive amounts of airflow. There are vertical lines on the airflow slider on the MAAT tank that came with the XT to help the user keep track of where it is set but I noticed on the tank that came with the MT that it did not have those markings. Not really necessary but a nice feature none the less.
FINAL THOUGHTS:
The Argus MT kit is another great kit in my opinion. With it having the same Gene TT 2.0 chipset and operation as the XT it’s hard to go wrong. The MT is a bit lighter than the XT and has a really good hand feel in my opinion. I mentioned earlier that I’m not a fan of lanyard rings but on this one it is actually nice to give my pointer finger something to rest against when holding it and it also helps to keep the mod from slipping out of my hand. Just like the XT, I wish the bottom display numbers were a little larger for people like me that don’t see as well as we used to.
The .3 ohm coil was probably my favorite out of the two. It was reading .36 on the MT and I was able to comfortably run it at 35 watts with the airflow mostly choked down. The flavor is really very good and at this lower wattage the vapor production isn’t quite as large as it is with the .2 ohm coil. The .2 coil is very good also and found myself eventually running it at 54 watts after a few days of use. It also produced very good flavor and even larger amounts of vapor. I’m sure if you like a warmer vape then you could run this one much higher. I still only had the airflow about ¼ open.
I really don’t mind that the MT has a built in battery with a 3000mah rating. Some people may turn their nose up at built in battery mods but I honestly can’t think of one mod with a built in battery that has quit on me due to the battery being bad.
So, would I recommend the Argus MT for you? If you like or don’t mind mods with built in batteries then definitely yes. Whether you decide to purchase the kit or just the mod, this is a really good one in my opinion. I wish all mods came with a lock switch.
I’d like to thank Voopoo and Nical for sending the Voopoo Argus MT kit for this review. Thanks also to those who choose to take the time to read my reviews. I hope I have helped you decide if this is a good fit for you. If you’d like to look a little more then there’s a link to the website below.
ARGUS MT XT-VOOPOO VAPE Spark Your Life
WHAT’S IN THE BOX?
1* Argus MT Device
1* Maat Tank New 6.5ml
1* TPP-DM2 0.2ohm Coil
1* TPP-DM4 0.3ohm Coil
1* Type-C Cable
1* User Manual
1* Glass Container
1* Silicon Rubber Pack
SPECIFICATIONS:
Tank Size 26*52mm
Tank Capacity 6.5ml (standard)
Tank Materia Stainless Steel+Pyrex
Tank Resistance TPP-DM2 0.2ohm, TPP-DM4 0.3ohm
Kit Size 145*40*30mm/td>
Kit Material Leather+Zinc Alloy
Output Power 5-100W
Output Voltage 0-8.5V
Kit Resistance Range 0.05-3.0ohm
Charging Voltage Type-C 5V/3A
Battery Capacity 3000mAh built-in battery
Color Pearl White, Graphite, Carbon Fiber, Lime Green, Dark Blue
FEATURES:
1. 100W max power, 6.5ml capacity
2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof
3. Ingenious crater leakage proof structure
4. GENE.TT 2.0 chip, QS lock
5. Built-in 3000mAh battery
6. 3A Type-C fast charging port with dust-proof cover design
7. Holeless appearance, lanyard ring design
8. Two-way airflow brings easy deep DL vaping
9. Easy top filling design
10. Multiple modes: Smart, RBA, Turbo and TC
11. Compatible with all TPP coils
12. BMS real-time battery protection
13. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection
INITIAL THOUGHTS:
The packaging for the MT is exactly the same as the XT. It comes in a very nice metal tin with an outer sleeve slid over it. The sleeve has a color picture of the device contained inside. I received the white version. As a matter of fact it is so white that it made it a little difficult to photograph. I won’t be carrying this one at work since my hands get dirty and don’t want to transfer that to the mod.
Once opened, the MT mod is visible along with the MAAT tank, spare glass tank section, and accessory box all mounted inside a plastic insert. Inside the accessory box is a USB-C charging cable and the two included TPP coils. One is the TPP DM4 .3 ohm rated at 32-40 watts and the second coil is the same TPP DM2 .2 ohm coil rated at 40-60 watts as what came in the XT kit. Underneath the mod is a bag of o rings and seals.
There’s no battery adapter with this one since it has a built in 3000mah battery. It is rated at a charge rate of 3A. It does seem to charge fast but when it had about 50% battery when I received it, I plugged it into my Klein USB tester with my Geekvape fast charger and it wasn’t pulling anywhere near 3A.
The Argus MT has very little branding. The Gene TT name is printed on one side with nothing on the other. The leather like material on the back has the ARGUS MT name stamped into it with the mountain symbol above the name.
The 510 top plate is shaped like the mod just like the XT was. It will allow up to a 28mm tank. In the center of the connection is the gold plated and spring loaded center pin. This one also has the lanyard ring on one side. I don’t mind it as much on this one as it seems to give my finger something to rest against and this mod is lighter than the XT. Since the MT has a built in battery there isn’t a battery door on the bottom but instead is a rubbery grey insert. I’m guessing this is to keep it from sliding around on a table or desk.
The adjustment buttons on the MT are a rocker type switch much like the XT but are positioned horizontal instead of vertical and on the MT they are marked with a + and – symbol. The MT also has the flip down cover for the USB-C charging/update port for a seamless design. One thing I thought I might mention is if you do ever need to do an update then you need to use the included cable and it has a triangle on one side of the C connector. This triangle needs to face down in order to do the update.
The chipset and display are the same on the MT as they were on the XT but in case you didn’t get a chance to see my other review then here are the display and button/menu functions.
The display screen gives the following information.
SET WATTAGE
MODE OF OPERATION(SMART, RBA, TURBO, TC)
BATTERY LEVEL INDICATOR WITH PERCENTAGE DISPLAY
PUFF COUNTER
COIL RESISTANCE
OUTPUT VOLTAGE WHILE FIRING
LENGTH OF TIME OF CURRENT PUFF
Just like about every Voopoo mod that I remember trying, if you leave the MT sit for several minutes then go back to use it then you have to push the fire button twice to fire it. They have a built in safety so if it gets hit by accident once then it just wakes the mod up but doesn’t fire. I’m not a big fan of this feature but I understand why they do it.
The menu system for the XT and MT are the same and use the same Gene TT chipset. The menu and button operation are as follows.
Press the fire button five times to turn the mod on/off
Press the fire button and – button to do a puff counter reset if you don’t want to do it through the menu
Press the + and – buttons to enter the menu system where you can choose between Mode, Setting, About Device, and exit
In Mode selection you can choose between Smart, RBA, Turbo, or TC
In the Setting selection you can reset the puff counter, choose to adjust the screen brightness or change the display type
Each of the four modes is displayed in a different color.
Turbo = Red
Smart = Orange
RBA = Blue
TC = Green
One thing that is different on the MT is that the QS Lock switch is built into the bottom portion of the screen and only has two positions instead of three like the XT has. The left position has the mod unlocked and the right position locks the device.
Ok, in case you didn’t see the MAAT tank information on my other review, here it is again. The MT kit included a DM2 .2 ohm coil like the XT kit did but also came with a DM4 .3 ohm coil rated for 32-40 watts. I really like the DM4 coil for battery longevity.
As always, it’s definitely always a good idea to break down a tank as far as possible for cleaning so that’s what I did with the MAAT Tank. It comes with what I consider to be a very nice 810 drip tip with a stainless beauty ring on the bottom to match the tank. The o rings are on the tip on this one rather than inside the top cap. The top cap on this one is a little different than most bayonet style caps I’ve seen on most tanks where the center is how it locks in place. On the MAAT tank there is a lip sticking out on either side of the outside edge of the underneath side of the cap that locks onto the body of the tank with somewhere between 1/8 and ¼ of a turn. This can be seen in the second picture below.
The top of the fill ports is covered by a gasket with a small hole in each side. I know some people like these gaskets but I personally don’t. If you’ve ever tried to fill a tank with a gasket with a glass dropper then you know it makes quite the mess. However, I also use some 10 and 50ml dropper bottles that work fine with this type of fill system. The MAAT tank has a capacity of 6.5ml.
The TPP coils simply push into the bottom of the tank to seal and then the bottom cap that contains the airflow control is screwed on. The inside of the base has three gold plated contacts to help transfer the power from the mod to the tank. There is a complete range of TPP coils that can be used on the MAAT tank.
The airflow of the tank mimics the design of a volcano to prevent leakage. The actual airflow control on the base is rather different from other tanks I’ve seen. There are two metal sliders that protrude a little to make it easier to adjust the airflow. The two openings are quite wide and allow massive amounts of airflow. There are vertical lines on the airflow slider on the MAAT tank that came with the XT to help the user keep track of where it is set but I noticed on the tank that came with the MT that it did not have those markings. Not really necessary but a nice feature none the less.
FINAL THOUGHTS:
The Argus MT kit is another great kit in my opinion. With it having the same Gene TT 2.0 chipset and operation as the XT it’s hard to go wrong. The MT is a bit lighter than the XT and has a really good hand feel in my opinion. I mentioned earlier that I’m not a fan of lanyard rings but on this one it is actually nice to give my pointer finger something to rest against when holding it and it also helps to keep the mod from slipping out of my hand. Just like the XT, I wish the bottom display numbers were a little larger for people like me that don’t see as well as we used to.
The .3 ohm coil was probably my favorite out of the two. It was reading .36 on the MT and I was able to comfortably run it at 35 watts with the airflow mostly choked down. The flavor is really very good and at this lower wattage the vapor production isn’t quite as large as it is with the .2 ohm coil. The .2 coil is very good also and found myself eventually running it at 54 watts after a few days of use. It also produced very good flavor and even larger amounts of vapor. I’m sure if you like a warmer vape then you could run this one much higher. I still only had the airflow about ¼ open.
I really don’t mind that the MT has a built in battery with a 3000mah rating. Some people may turn their nose up at built in battery mods but I honestly can’t think of one mod with a built in battery that has quit on me due to the battery being bad.
So, would I recommend the Argus MT for you? If you like or don’t mind mods with built in batteries then definitely yes. Whether you decide to purchase the kit or just the mod, this is a really good one in my opinion. I wish all mods came with a lock switch.
I’d like to thank Voopoo and Nical for sending the Voopoo Argus MT kit for this review. Thanks also to those who choose to take the time to read my reviews. I hope I have helped you decide if this is a good fit for you. If you’d like to look a little more then there’s a link to the website below.
ARGUS MT XT-VOOPOO VAPE Spark Your Life
-
Locked
Elf Bar BB3000 & BB3500
- Vape4ever
- 0 Replies
ELF BAR BB3000 & BB3500 Disposable Pod Device which can fire out 3000 / 3500 puffs. The ELF BAR BB3000 / BB3500 Disposable Pod Device has 650mAh rechargeable battery and 12 flavor choices.
-
Locked
Sourcemore × GeekVape T200 Kit Giveaway, 3 winners, ends on Sept.1st, 2022
- By Ema
- Sourcemore
- 0 Replies
T200 Kit is powered by AS Chip 3.0 and dual external 18650 batteries with 200W max and Type-C charging. Designed with a 2.4-inch full touch screen, it has 4 vivid UI themes and Power, TC-SS, TC-TCR (VPC, Smart, Bypass) output modes for your option. By adopting the new Tri-proof tech, GeekVape T200 becomes more compact. The IP68-rating water & dust resistance and a higher level of shock resistance also make it durable in use. GeekVape T200 is equipped with Z Sub Ohm Tank 2021 that features 5.5ml capacity, top filling, and top-to-bottom airflow system. It is also fit for Geekvape Z Coil with double service life.
Sourcemore × GeekVape T200 Kit Giveaway, 3 winners, ends on Sept.1st, 2022
Enter here
-
Locked
Geekvape H45 - unable to see the liquid level - my solution.. cut the top off
The H45 is great but there are two problems:
1) You cannot see the liquid level unless you remove the pod.
2) After you remove the pod and put it back in, you cannot vape straight away because the device is locked on "New coil" and you need to press the + button to be able to vape again.
That can be resolved by simply cutting about 3mm off the top of the case with a dremel or similar cutting device, and sanding it down with the sanding attachment.
It leaves bare aluminum metal but you can blacken it with a black permanent marker or car touch-up paint.
It doesn't affect the rigidity since the pod uses magnets to secure it down and it still has a deep footing after cutting off the top.
Now all you need to do is tilt it left and right and now you can see the liquid move to determine the juice level
1) You cannot see the liquid level unless you remove the pod.
2) After you remove the pod and put it back in, you cannot vape straight away because the device is locked on "New coil" and you need to press the + button to be able to vape again.
That can be resolved by simply cutting about 3mm off the top of the case with a dremel or similar cutting device, and sanding it down with the sanding attachment.
It leaves bare aluminum metal but you can blacken it with a black permanent marker or car touch-up paint.
It doesn't affect the rigidity since the pod uses magnets to secure it down and it still has a deep footing after cutting off the top.
Now all you need to do is tilt it left and right and now you can see the liquid move to determine the juice level
-
Locked
Hot Sale VOZOL ALIEN 2 & VOZOL Bar Lite Disposable
- VapesourcingUK
- 0 Replies
Today I would like to review two VOZOL disposable cigarettes, the VOZOL ALIEN 2 Disposable and the vozol bar lite disposable. Both disposables offer you 600 puffs. You can also make your choice by comparison.
Start with the vozol alien 2 disposable, a unit that offers 450mAh. And has the regular 2ml of vape juice with 20mg of nicotine.
Grape Ice is a light and sweet grape flavour with a cold taste. A hint of sweetness lingers on the tip of your mouth long after you've finished enjoying it.
Blue Razz Ice is a sweet taste of blueberries with a cooling sensation on the inhale. Menthol Breeze is a cool, refreshing flavour with a minty, cooling sensation and an icy taste that clears the mind immediately.
The vozol bar lite disposable is a 550mAh pre-charged battery for power and activates the device by inhalation. This disposable offers you six flavours, infused with mint, ice, dessert and fruit.
Lemon Tart top note will feel heavier with the sweet lemon taste, followed by the sweet taste of the tart on the nose.
Pineapple orange is a collision between sweet and sour pineapple and mellow orange. The sweet and tangy fruit flavour will surround you for a long time.
From the point of view of use, none of them has a flashy operation, everything just needs to be done with your mouth. Their light and compact size also allow you to take them out at any time, in a sophisticated and stylish way.
More hot sale disposables:
lost mary bm600 price
hot sale elf bar gee
Start with the vozol alien 2 disposable, a unit that offers 450mAh. And has the regular 2ml of vape juice with 20mg of nicotine.
Grape Ice is a light and sweet grape flavour with a cold taste. A hint of sweetness lingers on the tip of your mouth long after you've finished enjoying it.
Blue Razz Ice is a sweet taste of blueberries with a cooling sensation on the inhale. Menthol Breeze is a cool, refreshing flavour with a minty, cooling sensation and an icy taste that clears the mind immediately.
The vozol bar lite disposable is a 550mAh pre-charged battery for power and activates the device by inhalation. This disposable offers you six flavours, infused with mint, ice, dessert and fruit.
Lemon Tart top note will feel heavier with the sweet lemon taste, followed by the sweet taste of the tart on the nose.
Pineapple orange is a collision between sweet and sour pineapple and mellow orange. The sweet and tangy fruit flavour will surround you for a long time.
From the point of view of use, none of them has a flashy operation, everything just needs to be done with your mouth. Their light and compact size also allow you to take them out at any time, in a sophisticated and stylish way.
More hot sale disposables:
lost mary bm600 price
hot sale elf bar gee
-
Locked
Elf Bar TE5000
- Vape4ever
- 0 Replies
Elf Bar TE5000 Disposable Pods are made in a compact rectangular case made of metal and plastic. The case of the device are made in a transparent form for a partial demonstration of the filling of the device. The novelty is characterized by small dimensions and ergonomic shape. There are 15 flavors to choose from.
-
Locked
Coming Soon:The Latest Elf Bar BB3500 Rechargeable Disposable Kit 650mAh
- By Verashu
- Vapesourcing
- 0 Replies
This brand new disposable vape from Elf Bar comes in a multitude of great flavors. Elf Bar BB3500 Rechargeable Disposable Kit utilizes a Micro-USB charging port that allows you to enjoy your vape to the last drop.
Features
• 10.5ml e-juice
• 650mAh Built-in Battery
• 5% Nicotine Strength
• Draw-activated
Feels so good in your hand, with its silicone texture and contemporary design. The mesh coil makes it also come together with maximum performance and 3500 puffs you can depend on.
Please visit best online vape shop to get the cheapest vapes.
You may also like:
esco bars noms
CBD vape pen og kush
Features
• 10.5ml e-juice
• 650mAh Built-in Battery
• 5% Nicotine Strength
• Draw-activated
Feels so good in your hand, with its silicone texture and contemporary design. The mesh coil makes it also come together with maximum performance and 3500 puffs you can depend on.
Please visit best online vape shop to get the cheapest vapes.
You may also like:
esco bars noms
CBD vape pen og kush
-
Locked
Coming Soon: Kros Nano Vape Disposable Kit 5000 Puffs 13ml
- By Verashu
- Vapesourcing
- 0 Replies
The KROS Nano is a 5000 puffs rechargeable disposable vape powered by vape store near me, and based off the popular Vaporesso Xros Nano. The KROS Mini contains 13ml of 5% salt nicotine vape juice, a 650mAh battery, and a USB-C charging port. This draw activated disposable comes in an anti-leaking packaging, and is available in a number of great flavors.
Have you experienced a time where your favorite vape pen was running out of puffs? Maybe you wanted to finish vaping before going to bed or finishing the day, but you weren’t able to get enough hits. This is where the new Kros Nano comes in. With 5000 puffs, it’ll be atleast a week before you throw this device away.
On top of that, this is the best product for your price. You won’t find another vape with this many hits at such a low cost.
The Kros Nano is disposable vape that has seen success since its recent release (and continues to grow in popularity) for its high-quality materials, excellent performance capabilities, and aesthetically pleasing appearance.
Specifications:
Capacity: 13mL
Total mL per box: 78mL
Salt Nicotine: 5%
5000+ Puffs
Rechargeable
Premuim Mesh Coil
Recommended products:
elf bar airo max
esco bars mega 5000
Have you experienced a time where your favorite vape pen was running out of puffs? Maybe you wanted to finish vaping before going to bed or finishing the day, but you weren’t able to get enough hits. This is where the new Kros Nano comes in. With 5000 puffs, it’ll be atleast a week before you throw this device away.
On top of that, this is the best product for your price. You won’t find another vape with this many hits at such a low cost.
The Kros Nano is disposable vape that has seen success since its recent release (and continues to grow in popularity) for its high-quality materials, excellent performance capabilities, and aesthetically pleasing appearance.
Specifications:
Capacity: 13mL
Total mL per box: 78mL
Salt Nicotine: 5%
5000+ Puffs
Rechargeable
Premuim Mesh Coil
Recommended products:
elf bar airo max
esco bars mega 5000
-
Locked
For Sale Lot of FOUR (4) Juices (3 Cookie, 1 Fruity)!
- By Drewps5co0tt
- Member Classifieds and Swaps
- 0 Replies
Johnny's Juice; Hooch 125ML/3MG (A special concoction of pineapple & pomegranate turned in to a moonshine.) Vaped a couple ML's, not my thing.
Sadboy; Butter Cookie 100ML/3MG (Sugar Cookie). Vaped a couple ML's, not my thing.
Kings Crest; Sugar Cookie 100ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.
Glas; Sugar Cookie 60ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.
All juices are 70VG or higher. Johnny's purchased 6/22, all other juices purchased 8/22.
$40 (PayPal or Zelle), I prefer Zelle.
Shipping: Free (US ONLY)
Thanks!
Sadboy; Butter Cookie 100ML/3MG (Sugar Cookie). Vaped a couple ML's, not my thing.
Kings Crest; Sugar Cookie 100ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.
Glas; Sugar Cookie 60ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.
All juices are 70VG or higher. Johnny's purchased 6/22, all other juices purchased 8/22.
$40 (PayPal or Zelle), I prefer Zelle.
Shipping: Free (US ONLY)
Thanks!
-
Locked
DARE TO BE DIFFERENT - Eleaf FlasQ
- By ELEAF_Adela
- Eleaf 2023
- 0 Replies
Do you like the shape of Eleaf FlasQ?
The solid all-metal body integrated with a novel and unique flask-like outline demonstrates the individuality of Eleaf FlasQ.
Eleaf FlasQ is ergonomic and compact. Eleaf FlasQ is integrated with an internal long-lasting 1370mAh battery and a 5ml capacity pod. FlasQ while still keeping in a compact size and feeling comfortable in hand.
BTW: Just click here to win it, try it for free!
The solid all-metal body integrated with a novel and unique flask-like outline demonstrates the individuality of Eleaf FlasQ.
Eleaf FlasQ is ergonomic and compact. Eleaf FlasQ is integrated with an internal long-lasting 1370mAh battery and a 5ml capacity pod. FlasQ while still keeping in a compact size and feeling comfortable in hand.
BTW: Just click here to win it, try it for free!
-
Locked
Beco Pro Disposable Vape Kit 6000 Puffs 12ml $16.99
- By Verashu
- Vapesourcing
- 0 Replies
Try the all new Beco Pro Disposable Vape at vape shop. The Beco Pro Disposable Vape is a box style pod device that requires no maintenance due to it's simple and disposable nature. The Beco pro features no buttons and is automatically activated when you inhale. Estimated to last up to 6000 puffs the Beco Pro is pre-filled with 12ml of TFN-based e-liquid in a 50mg nicotine level and is available in variety of flavors. Each Beco Pro is designed with a 650mAh rechargeable built-in battery. Perfectly designed for the best vaping experience on the go the Beco Pro Disposable Vape is also equipped with a 1.2ohm Mesh Coil and 2 and airflow control options for the best vapor and flavor satisfaction.
Specifications:
Dimensions: 76.5mm x 45.8mm x 20.9mm
Built-in Battery Capacity: 650mAh
E-Liquid Capacity: 12ml
Beco Pro Features:
1.2ohm Mesh Coil Design
Disposable Design
(2) Airflow Control Options
No Maintenance Required
Classic Automatic Style
Vape Pen Design
Ultra Lightweight and Compact Design
Non-Refillable Design
50mg Tobacco-Free Nicotine E-Liquid
Flavors by Beco
You can get more information about nicotine free vape at: https://www.bbb.org/us/ca/tustin/profile/ecigarette-liquid/vapesourcing-1126-1000099548
Specifications:
Dimensions: 76.5mm x 45.8mm x 20.9mm
Built-in Battery Capacity: 650mAh
E-Liquid Capacity: 12ml
Beco Pro Features:
1.2ohm Mesh Coil Design
Disposable Design
(2) Airflow Control Options
No Maintenance Required
Classic Automatic Style
Vape Pen Design
Ultra Lightweight and Compact Design
Non-Refillable Design
50mg Tobacco-Free Nicotine E-Liquid
Flavors by Beco
You can get more information about nicotine free vape at: https://www.bbb.org/us/ca/tustin/profile/ecigarette-liquid/vapesourcing-1126-1000099548
-
Locked
New Released: Hellvape Dead Rabbit M RTA
- VapesourcingUK
- 0 Replies
Dead rabbit from hellvape has several models. In terms of appearance, the hellvape dead rabbit m rta is similar to the dead rabbit 3 rta, however, there are many small details that make the design different.
Dead Rabbit M features a large 5ml capacity and the glass tube is transparent so you can keep an eye on the vape juice and refill it in time.
The top-to-bottom laminar honeycomb airflow not only evaporates the heat generated by the unit properly but also brings in more fresh air on inhalation.
And the pillarless ceramic deck allows you to place regular single coils and prevents mesh coils. It is of course recommended that you choose mesh coils as they are more comprehensive.
You can easily refill by turning the top cap and the flexible adjustable airflow operation gives you the freedom to customise the flavour output. The hellvape dead rabbit m will bring you the ideal vaping time.
The larger 810 drip tip also allows more clouds to be inhaled at once for painful DL Vaping.
More products recommended:
https://vapesourcing.uk/smok-novo-2x-kit.html
Dead Rabbit M features a large 5ml capacity and the glass tube is transparent so you can keep an eye on the vape juice and refill it in time.
The top-to-bottom laminar honeycomb airflow not only evaporates the heat generated by the unit properly but also brings in more fresh air on inhalation.
And the pillarless ceramic deck allows you to place regular single coils and prevents mesh coils. It is of course recommended that you choose mesh coils as they are more comprehensive.
You can easily refill by turning the top cap and the flexible adjustable airflow operation gives you the freedom to customise the flavour output. The hellvape dead rabbit m will bring you the ideal vaping time.
The larger 810 drip tip also allows more clouds to be inhaled at once for painful DL Vaping.
More products recommended:
https://vapesourcing.uk/smok-novo-2x-kit.html
