• Question
Burnt Cotton <24 hours

Hi guys, im posting here after about 2 years of vaping and the utmost frustration. Every time I vape someone else's vape it tastes amazing but I cannot seem to get an RTA or RDA to wick.
WIth around a 0.2 ohm build I can barely go above 35W and even with maxing out between there and around 50W I get very little flavour (70/30 juice).

I have the Zeus X dual coil, the Dead Rabbit v3, The Blotto Max rta, the wotofu serpent, the Profile X Mesh/Dual coil RTA and the Profile Dual Mesh RDA and the Zeus Z tank (prebuilt), I used to own 2 x dead rabbit R tanks and threw them away because they both leaked and gave horribly dry hits (I thought that was an oxymoron?? those are supposed to be opposites but somehow it was my reality).

I have tried wicking very thick (can barely pull the cotton through), wicking very thin, wicking medium, thinning lots, not thinning at all, cutting at a 45 degree vertically, cutting at a 45 degree horizontally, long tails, short tails, medium tails - nothing works!

I wick every day, so by now I've really tried everything, and within 24 hours the cotton burns through the middle and i lightly pull to separate half a wick to rewick again. I've never had gunked up cotton from 2 weeks of vaping. I thought I must be doing something wrong so i bought the Zeus Z tank which is a prebuilt coil and theres nothing I could do wrong but that is usually great for 24 hours and then I have to close the airflow and pull just to get it to wick for about 3 hits and then repeat.

Please help!

  • Question
I hate every mod vape I've owned. Can that change?

Just to be clear, I love vaping. It got me off cigarettes, it tastes great and its a lot better for me. I can feel that its better for me. Not healthy, but better. Now to where im stuck. I absolutely hate my mod vapes. The bottom air flow ones leak all the time. The top air flow ones flood the tank all the time and I end up emptying out 1/3 of my tank flicking it out of the chamber to clear it. It pisses me off. I checked all the hardware, have the wattage at the recommended 70 setting, clean it every time I refill it, don't draw too hard, closed the airflow a bit to mitigate drawing too hard......still floods and spits about 2 or 3 times a day. Im about to throw it away. I'm tired of wasting juice that's $30 a bottle now, replacing coils every 6 days, and getting crap all over my hands, sometimes pant pockets, and my car drink holder. I love eveything about the disposables besides the cost and the 50mg level. Thats way way too much nicotine and they dont come in really anything lower that I've seen besides maybe 30mg. I dont know what to do because I dont want to go back to cigarettes, I like vaping, and I am too stupid to just quit it all. Any suggestions? Am I just an idiot?

  • Question
Anybody know any Salt Nicotine Wholesalers to purchase from China? PM Me if you have a contact or know where i can find some

I am looking for any Nicotine wholesalers that sell Salt Nicotine in VG base between 100 and 300mg from China or wherever will ship to Canada if anyone can help me find some or has any recommendations please let me know in a private message... thank you

  • Question
Filling "used" cartridges with e-liquid

I have been vaping for years using vapor4life high resistance 3.2 ohms new menthol 2.4%, it is a battery and a cartridge. The company no longer has any, so my question is, can I refill the empty cartridges ( they are not really empty?) as the cotton probably still has some flavor in them, I am trying to find a menthol type taste that has no tobacco taste at all in it. I was thinking about filling them with flavorless nicotene.

  • Question
Movkin Disguiser: Where can I get, or what kind of telescopic/long 510 drip tip should I get for a more restricted airflow?

Finally brought out the Movkin disguiser I bought last year. I love it's functionality, and the fact that it can fit a pretty decent sized atty on it. My only issue being that the provided telescopic drip tip has a very open airflow and I am a bit used to a more restricted one now. I am looking for any long (or telescopic if at all available) drip tip that you think would be sufficient from your experience.

  • Question
Sigelei Fuchai 213 Fog

I have a Sigelei Fuchai 213 Fog, not any of the other variants of this mod, and there are a few, I cannot find how to reset the puff counter. The operator manual instructs how to do a mod reset, which includes a puff count reset, but these instructions do not work. I reached out to the vendor I bought it from, but they can't help. I wrote to Sigelei and they do not answer this question, I can do the math to keep track, but would much rather see if anyone here has an answer. Thank you Cheers

  • Question
Hello from

I have a Sigelei Fuchai 213 Fog, not any of the other variants of this mod, and there are a few, I cannot find how to rest the puff counter. The operator manual instructs how to do a mod reset, which includes a puff count reset, but these instructions do not work. I reached out to the vendor I bout it from, they can't help. I wrote to Sigelei and they do not answer this question, I can do math to keep track, but would much rather see if anyone here has an answer Thank you Cheers

  • Question
RDA. Why does one coil gunk up way faster then the other?

I've had this happen before but never so uneven. I'm posting a pic l. Idk if you can see it weel because my camera sucks. One coil looks almost brand new. Left. The othe lr is almost completely black. Right. They seem to be burning evenly and I know they were heating evenly when I first put the build and removed the hotspots. Anyone know what causes this? They are identical coils.

Attachments

  • 20230529_013545.jpg
    20230529_013545.jpg
    1.2 MB · Views: 47
  • Like
Reactions: Kprthevapr

  • Question
Does vaping sweet liquid at a low wattage in a low ohm coil cause more junk to build up?

Particularly noticed my cookie flavor is just bitter AF. it tasted good the first night, then bitter changed cotton, bitter. Bitter bitter bitter! Never had this happen with my other sweet liquids, only after a week usually this happens. Cookie goes bitter bitter immediately. The liquid is about a year or so old but my other ones same age taste fine still, and it tasted good at first.

  • Question
Please help if you can MTL

Hello
I have a wired MTL issue that is happening to me for 7 years, please help me if you can, i would be really really thankful.
First, every thing is the same, the wire i use, the wick, the wraps, the diameter, the liquid, the mod and the tank
I make MTL builds which is ordinary, nothing special with it, BUT, every 10 or 20 builds, without knowing the reason or the secret i make that build that's really magical, the MTL hit that i want,it's like a refreshing hit that makes the world beautiful again, and after the coil expires ( 7 to 12 days of intensive using ), i don't know the reason how to make the same again ?! , as i said every thing i use is the same, but the only repetitive sign of that coil is when i change the wick after a day of using, i find the wick already cut to half from the center of the coil !!, if you an MTL vapor and you have experienced the same or you were able to solve the puzzle and know the secret, please help
Thanks for the long time to read my problem.

  • Question
Multiple "right ways" to wick with Japanese cotton pads?

So I just watched 3 different videos. All three guys used Japanese cotton differently. I took all their methods and did my own. It seems to be working great as of right now so, no real problems with the way I just did it I guess. First I eyeballed and cut off a strip. Then I carefully peeled off both the outside layers. I was left with a big fluff, just like if I were to take a strip of cotton bacon out and fluff it into my coil, only this was "pre fluffed" it was just about perfect tension when I put it through the coil, not too tight not too loose. I didn't fan out the tails, I just clipped it to size, positioned it, primed it. So far works great. I can take a nice long draw and it insta-feeds more juice, giving me a nice big fat air bubble. I like this stuff.

So ok, the videos I watched though. I saw one guy only peel one side, another guy split it down the middle and took off a piece off one peeled side, another guy peeled it down the middle took one side and tightly rolled it up. Idk about them, but I think the way I did it makes more sense than all three lol. As long as it keeps a nice steady juice feed and doesn't burn up right? I suppose there's no right way to do it long as it works.

  • Question
Getting spitback,why?

Hey guys,

I have this tank i never used before came with a kit decided to finally give it a go,
Its a Geekvape Z tank not zeus its just called Z tank anyway it has a preinstalled coil .14ohm i put my diy liquid in there i always use this liquid never had any issues on any of my sub tanks or rtas i think its a 60VG 40pg juice cause i used 10% flavoring and used a base of 70/30..
But like i said never have issues with any other tanks but this one im getting some serious spit back like every hit i take im getting juice in my mouth.
I cant figure out why
Im using it at 70watts the coil states best at 60-80watts i tried higher and lower wattages no change..
Whats going on?
Never even experienced this before im lost for words lol any of you kno whats going on?

I just used this same juice on another subohm tank, no spitback i dont get it..

  • Question
Vaporesso Luxe "battery error"

Hi,

It's been a little over a year since I last used the electronic cigarette and when I tried to recharge it yesterday, it displayed "Battery Error".
So I said to myself that I had to change the batteries (I bought the same ones I had before),
so today I went to buy the new batteries, but still the same problem.

anyone have a solution?


Login to view embedded media
  • Wow
Reactions: Izan

  • Question
Need help from former MFS (MyFreedomSmokes) customers

Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
Everything I buy tastes like dead chrysanthemums.
I have one 60ml bottle left in the refrigerator that I got right before they closed
and am desperately trying to find a replacement before i open it.

  • Question
Geek vape L200 voltage display

Using the geek vape l200 mod, it's awesome. I would like to see what the voltage is when I take a draw, but the only way I can see it is if I'm looking in a mirror while inhaling. Is there a way to delay the display so I can see the voltage after I take a draw? There's really no way to see the voltage while I'm vaping. Like it's got a delay for the inhale time, but not the voltage. So far I don't see any way to change this. If not, no big deal. Just curious.

  • Question
Are Handmade Coils Really Better?

I've been vaping for the past 10 years and I've seen a lot of incarnations of the industry but the last few years I've noticed a particular group of vapers making their own coils. I get the allure, manufactured coils are terrible and often burn out within a day or two, but is the taste and longevity of your home made coils actually better? Or is this just something they say to justify the work involved in making them at home?

Are they really better than manufactured coils?

  • Question
Voopoo Uforce L Tank coil compatibility

Hey guys, hope all is well?

After originally struggling to find a 4ml geekvape obelisk c tank in the UK, I was pointed in the direction of the Voopoo Uforce L Tank and was told that the Fireluke M coils were compatible with it but not specifically which ones after stating the coils that come with the tank were rubbish. I did buy some freemax 904L x3 mesh coils but they won't fit.

Could somebody please point me in the right direction to which fireluke coils will fit this tank?

Thank you

Filter