VOOPOO Doric Q Kit is powered by an 800mAh internal battery and combines with the VOOPOO ITO cartridge that holds 2ml of e-liquids. The macaron color and its smooth surface come with its dual-injection design for both wear resistance and good grip. It can always bring you stable taste from the first to last puff with a stable output power. The 5 safety protections can guarantee the safe use of the Kit.



Material: PC+PCTG
Battery Capacity: Built-in 800mAh battery
Charging: Type-C
Output Power: 12W
Output Voltage: 3.2-4.2V
Resistance: 0.6-3ohm
Capacity: 2ml
Filling: Side filling
...

Click here for more:

Doric Q Kit: VOOPOO Doric Q Pod System Kit

As per the title I got the Cyborg Quest today and its a great little device (Not so little itself hehe) It came with 2 included UB Pro coils but they are terrible!
little background. I had the SWAG 2 around 2020 then stopped vaping. Got an RPM40 last year and the flavor was amazing, I could taste everything and it produced very sweet vapor in my mouth but the coils would burn out in 2 or 3 days known issue.
So I decided to get the Cyborg Quest it arrived today but the flavor with the included coils is terrible! like lieterally a 1/10 for both despite having great vapor production.

I was wondering what coils would you guys recommend for best flavor? I am looking for something that will last at least 5 to 7 days minimum.
I was looking at the TNX2 0.5ohm coils or 904 XL 2 coils since they were the most recommended on reddit by other users.

I was wondering if any of those 2 would be my best bet? and was also wondering if I did go with either of those coils would the Fireluke 2 or Fireluke 3 be a better choice?

NOTE: I read a lot on reddit the 904 XL 2 has amazing flavor but lots of people were saying they burn in 2 or 3 days. So not sure what other options I have.

Thank you! look forward to any help I can get.

So i got this in a Christmas bundle from VOOPOO and as a primarily DTL vaper i was skeptic as its a MTL vape but im actually astonished at how good this is with flavor. I used a 0 nic (freebase) Cannoli Be Mine from Casadagua E-Liquid (may have misspelled their name my bad) and i didnt realize you could actually taste the Cannoli shell, that is until i got this device. Downfall though is that it comes with a fully sealed (nonremovable coil) pod so when it dies you gotta buy a new tank with the new coils which are replaceable. Kind of a hassle but the pods on Sourcemore are only 5 bucks for 2 empty pods before shipping which isnt too bad. Now for the fun part:

Specifications

Colors: 7 colors in total (Mint Green, Primrose Yellow, Navy Blue, Misty Rose, Chartreuse Yellow, Deep Brown and Begonia Red)

Size: φ23.2*95.6mm

Battery Capacity: 800mAh built-in battery
Output Power: 12 W

Battery Charging: Type C 5V/1A (fully charged with 50 minutes）

Material: PC

E-liquid Filling: Side-filling (visible capacity)

Kit Cartridge： VOOPOO ITO Cartridge 1.0Ω/2ml；
Compatible Cartridge：VOOPOO ITO Cartridge 0.7Ω/1.0Ω/1.2Ω, VOOPOO ITO Pod, VOOPOO ITO-X Pod

2.Key Selling Points

1)Lovable and Affordable:

The double-injection design makes DORIC Q a bright and eye-catching device with gorgeous colors and crystal shine. Meanwhile, the customer-friendly price is a surprise, users can get DORIC Q at a lovable price.

2)Long-lasting in Service

With a built-in 800mAh battery, the delicate and small DORIC Q is long-lasting in service, giving users more vaping time and less fuss on charging. It is tested that it could support 2 days vaping with the normal vaping frequency. (the results might differ from the real customer environments)

3)Long-lasting Cartridge

The new VOOPOO ITO Cartridge, with its durable preinstalled VOOPOO ITO atomizer coil, brings users a professional mouth-to-lung vaping experience with an ultra-smooth taste. Compared to traditional cigarettes and disposable vapes, one DORIC Q cartridge lasts up to 10 days of vaping, with a fairly economical consumption.

4)Good Taste and Flavor for MTL

DORIC Q is equipped with VOOPOO ITO Cartridge, which is a newly released cartridge with a preinstalled coil supported by VOOPOO ITO atomization technology for MTL vaping.

Verdict:

I will say this is the second time ive picked up a second device of the same kind from the same manufacturer so i can keep one in my car as i love this vape. Its small (about the same height as the Freemax MaxPod kit) i do enjoy how small it is and it feels remarkably well built for what it is. Would solidly 9/10 recommend

BUY NOW! Uwell Caliburn AK3 Pod Kit

Specifications:

• Slim Refillable Pod Kit
• 520mAh Battery
• 15-Minute Recharge
• Inhale Activated
• MTL Vaping
• Mesh Coils

YEAR END SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (HNY) TO GRAB 20% DISCOUNT STOREWIDE TILL 1st JAN,2023

I need to know if anyone has any or knows where I can buy the premade wicks an wires. That fasttech sold for 2$ for 50 in a baggie. I pop them in my pro tank coils???

The newly launched ijoy lio mini disposable vape kit is very light and thin, shaped like a straight pen. When you need to go out, you can easily put it in any corner of your bag or pocket, very convenient to carry. Its shell is available in 4 retro and textured colours, with the LIO logo printed on the bottom, which is low-key and beautiful, and you can use it as a small accessory for a large amount. It comes in 8 different flavours to give you more options and fun.

This disposable vape can provide you with 600 puffs of suction, which can meet the needs of most people. It contains 2ml of nicotine salt e-liquid with a strong nicotine strength of 20mg, a rich and stimulating taste. Even the last drop of e-juice can guarantee you the purest and richest taste. When the e-liquid is exhausted, you don’t need to refill it, just replace it with a new one, and you can continue to enjoy vaping. This is the convenience of disposable cigarettes.

The 1.0 ohm NI80 vertical coil is capable of producing a large cloud of vapour that lasts up to 600 strokes and is able to bring you extraordinary flavour performance for an easy, reliable and fun vaping adventure. Lio Mini is equipped with a 400mAh battery, which can provide sufficient battery life for your device until it runs out of liquid and replaces it with a new one. This disposable pod is light and beautiful, I believe you will like it.

More new products are available in our vape online uk, you are welcome to choose.

You might also like：
best xros 3 uk
lost vape centaurus m200 mod hot sale

As 2022 draws to a close, thank you for your support for vape sale this year. The New Year's bell in 2023 is about to ring, and we have also prepared a reward event to welcome the new year.



Time: 00:00:00 12/30/2022 - 23:59:59 1/2/2023

You will get a 12% OFF Sitewide Discount with CODE: NYS12
Also, you can get the free shipping on $99.
But pay attention: It's only for orders from USA Warehouse.(After discounts)

If you haven't bought the vaping devices you are satisfied with during Thanksgiving and Christmas, or you still feel that you still have one or two items away from a starter kit or disposable or vape juice...It coincides with the release of new products by major brands, Come and grab these awesome New Year gifts at super low prices!

More related you may want to know:
vape juice online
SMOK

Title.

Previously had the Vaporesso Gen and then got out of the scene for a while. Looking to get back into it.

Local: 94553
PayPal preferred

Been out of the scene for a while, but coming back lightly.

Lurked and finally registered. Cheers!

Hello everyone, today's topic I want to discuss is the atomizer, steam crave meson rta, I think this brand of atomizer should be familiar to many people. The product I’m going to introduce to you today has a single-coil build platform and is available in a 25mm diameter. The deck provides you with two simple structures and a chamber to condense the steam.

Meson steam crave features a top filling system, you only need to open the top cover to fill it quickly, and there is no risk of vape juice leakage. The top also has an adjustable airflow system, so you can precisely control the amount of inhalation. The container has two kinds of e-liquid capacity, bubble glass 6ml and straight tube glass 5ml. I think it is very humane that the glass tube can be replaced because it means that you can change the capacity you want at will.


Perfectly compatible with steam crave hardon mini dna100c mod, the output performance and intelligence of such a high-power product will definitely satisfy you. If you are looking for more practical devices, the best online vape store uk will give you the best presentation.

More interesting e-cigs:
xros 3 price
top argus p1 voopoo

Uwell Crown M Kit features a 1000mAh built-in battery, using a power level between 5W and 38W. The boxy and hybrid kit is compatible with the Crown M pod and the 0.8ohm/0.4ohm Crown M Twin-coil is pre-installed, which supports dual output modes. Under the alternation working mode (suitable for MTL), the resistance is 0.8ohm and it has clearer layers of taste & longer coil life's span. Under the mutual working mode(suitable for DTL), the resistance is 0.4ohm and it is able to bring thicker cloud and richer taste.



Battery: Built-in 1000mAh battery
Charging: Type-C charging
Output Power: 5W-35W
Capacity: 4ml
Filling: Top filling
Airflow: Adjustable airflow
...

Click here for more:

Crown M Kit: Uwell Crown M Pod Mod Kit

BUYNOW! CoolPlay X82 Disposable Device (4000 Puff)

Specifications:

• Size: 52*19.8*69.8mm
• Weight: 53g
• Pod Capacity: 8ml/4000puffs
• Body Material: Dual color injection
• Battery Capacity: 550mAh
• Charging: Type-C

YEAR END SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (HNY) TO GRAB 20% DISCOUNT STOREWIDE TILL 1st JAN,2023

Hello again. I hope everyone had a fantastic Christmas. I decided to give myself a break from writing reviews for a couple days over the holiday but now I’m back at it. This time I’m going to try to provide you with a fair and honest review on the BP Mods LABS MTL RTA that was sent to me by Dovpo. This one has a bit of a different design to it compared to anything I’ve seen before. The LABS is a 22mm rta with a 2.7ml liquid capacity. It has a single coil post less build deck and comes with six different airflow pins for airflow adjustment since there is no external airflow control ring on this one. It is designed strictly as a MTL rta even with the largest airflow pin inserted. I’ll talk later about the difference in design that I spoke about earlier.



WHAT’S IN THE BOX?

1x Labs RTA Atomizer (SS or DLC)

1x Drip Tip 510

6x Air Pin

4x Bells

1x Bell Removal Tool

1x Replacement Accessories (O-Rings and Screws)

1x User Manual

SPECIFICATIONS:

Dimensions: 38.6x22mm (excluding Drip Tip and pin)

Material: Stainless Steel and Polycarbonate

Colors: SS and DLC

Liquid capacity: 2.7ml

Liquid Refill: superior

Attachment: 510

Drip Tip: 510

Shot: MTL Adjustable via Pin supplied

Typology: Regenerable (RTA)

Airflow: Adjustable with Pin (0.8×2; 0.8; 1.0; 1.1; 1.2; 1.5mm)

Aromatic yield: Adjustable via 4 different Camapane supplied

Deck: Single Coil

INITIAL THOUGHTS:

I was not able to find out much information on this tank so please bear with me and I will do as well as I can to cover the features of this rta. The packaging for the LABS is the usual BP Mods orange box with a sleeve over the outside of the box. The sleeve has the name of the rta as well as the statement “Above Any Idea” with a picture of the coloseum in the background. The back side of the box has a contents list, some features, company information, and a sketch of the tank stating the color of the tank inside. I received the DLC version which is basically a gunmetal color.

Once the outer sleeve and box top are removed then the LABS RTA is visible with three inner bell caps and an accessory box on the side that contains the spare airflow pins, tool for changing the pins and bell inserts, three different coils, and spare o rings.

As always, it’s a good idea to disassemble the tank and clean it before use. This one is a little different to take apart. The deck is held in but o rings and does not have any threading. Also the top cap turns to the right instead of to the left like most tanks. It is a bayonet type design but the direction of turning is opposite of what I’m used to. You can see both sides of the top cap in the second picture below. In the third picture you can see that by turning the top cap to the right it actually closes the internal juice flow openings and when you turn to the left you can feel it turn to open the juice flow ports and locks the cap in place.

Besides the differences I’ve mentioned already, there is another feature that is different from anything I’ve seen. There are four different flavoring bells included in the kit that are supposed to optimize the flavor depending on the type of liquid you are using whether it’s a tobacco, dessert, or other type. The only one I really noticed much of a difference with was the multi-stepped one recommended for tobacco flavors which I used a NET tobacco mix in use for testing. The flavoring bells are replaced using the included tool and you just push the old one out with the tool and push the new one into place over the two juice flow pins.

This rta uses a gravity feed liquid supply system through two tubes that feed the liquid to the wick. Because of this type of feeding system, you need to make sure the shoulders of the wick are a little high to meet up with the tubes once the tank is assembled. The picture below shows the liquid flow tubes and you can see the pre-installed flavoring bell. You want to keep close track of the included tool. It is needed for replacing the flavoring bells as well as for removing and inserting one of the included six airflow pins. The airflow pin has to be inserted before installing the coil but you can try out the different inserts to determine which is best for you before actually installing the coil and wick. Each of the airflow pins has two flat sides that align with the notches on the tool to allow you to thread the inserts into place. The airflow pins are the only airflow control on this tank. There is an airflow opening on the bottom of the tank but it is not adjustable.

The build deck is a very simple single coil deck and very easy to build. Once the coil is inserted and the legs are trimmed then install the cotton paying close attention to the height of the shoulders of the wick. The shoulders need to be a little high to meet up with the juice flow tubes that I mentioned earlier. Once the coil and wick are installed and you are ready to assemble the deck and body of the rta then there is a notch in the build deck that aligns with the tab in the body to lock the base into place and keep it from turning. As I mentioned earlier, there is no threading on the base and the build deck is simply held in place by two o rings.

FINAL THOUGHTS:

I think that BP Mods really came up with some ingenious design ideas on this rta. It would never occur to me to have different flavor bells for different liquids. The multi-step tobacco bell is the one that really stood out to me. I initially tried the pre-installed one with a NET tobacco mix and then switched the bells out finally settling on the multi-step one with my NET mix.

It seems foreign to me to not have an adjustable airflow on the outside of the tank but this one doesn’t. It’s all done with the airflow control pins that have to be threaded into the build deck. I don’t love that the pins cannot be changed once the coil is installed. For me it would have been able to be changed after the coil is installed.

The tank section on the LABS rta is rather dark which makes it difficult to see the liquid level. With only a 2.7ml capacity it would be nice to be able to keep better track of the liquid level. One other thing that I didn’t love was that when the top cap is removed to fill the tank, you don’t have fill ports but have to pour the liquid around the side of the center tube and it’s a little difficult to tell the liquid level while filling.

I didn’t try all of the airflow control pins because I know that I prefer a loose MTL vape and immediately went with the largest airflow pin. With this pin it is still an MTL type of vape but is quite loose like I like it. You aren’t going to be able to do an RDL with this tank.

Overall the LABS is a great MTL rta that should fit the needs of all of those that like MTL vaping. It has some really neat designs and functions well. The flavor production on my NET liquid was very good with this tank. I’d like to thank Dovpo and Dorothy for sending the BP Mods LABS MTL RTA for this review. Thanks also to the readers as always. I’d love to give you a link to the website for this tank but it’s not up on the website yet.

The appearance of the new digiflavor drop rda v2 is very cool and fashionable. It is decorated with 6 different brilliant colours for you to choose from, which is very eye-catching. The three-dimensional thread design on the top makes the overall appearance more textured. Its interior features a double-post deck design with large holes to accommodate coils of any size. In order to facilitate the operation of the building, it is specially designed with a large space for your control and operation.

This RDA is very intelligent and user-friendly. It supports the double-coil structure, which can bring you more fun and experience. At the same time, you can adjust it from the rotating thread structure on the top to adjust the airflow to your liking level, bringing you a wonderful taste and better satisfying your personal habits.

You can see that it has a large space with a diameter of 24 mm, and a double rear build deck design with four large post holes, which allows you to operate more smoothly when changing coils and correcting coils. Air slots on the sides of the case allow a large amount of air to flow into the structure for enhanced flavour expression. The strong return of Classic drop RDA will bring you a great DL vaping experience.

Our online vape shop uk has carefully prepared more high-quality vape products, I hope you will like them.

We would also like to recommend for you:
centaurus m200 uk
aroma king 7000 hot sale

Lost Vape Ursa Baby Pro Kit is a top-tier level pod system featuring 25W max power, 900mAh battery capacity, and has an MTL/RL airflow range. The combination of MTL and RL design makes it more choices for both newbies and veterans. Equipped with upgraded Ursa Cartridge that features 50% longer coil lifespan and 50% stronger flavor boost, you can enjoy the refreshing vaping at a whole new level across pod system device.



Features:
1. Rock solid zinc alloy, max 25W
2. With upgraded Ursa cartridge
3. Compatible with salt/freebase
4. Supports all MTL to loose MTL & RL
5. Safety protections: Short-circuit/Weak Battery/Over Head Protection
...

Click here for more:

Ursa Baby Pro Kit: Lost Vape Ursa Baby Pro Pod System Kit

What I want to introduce to you today is a brand new pod vape kit, voopoo doric 20 se is a very suitable mouth-to-lung e-cigarette, it provides you with a 1200mAh battery and a maximum power of 18W. Of course, if you want the best taste, 12W The output is the most suitable and constant temperature.


6 protection modes provide continuous protection for the device, thanks to the advanced GENE.AI chip. Of course, a stable and continuous output is also indispensable for its blessing. Doric 20 SE provides a 2ml voopoo ito cartridge, and of course, ito-x pod tank can also fit perfectly with it. I don't know if you are familiar with this product, but it is also compatible with voopoo drag q. The slender mouthpiece is also more comfortable to inhale, and the soft and delicate taste is easy to obtain.

An atomizer can be used for at least ten days. Of course, the cooperation of the coil is also indispensable. The life of voopoo ito coils is enough to make you use it for such a long time. Whether it is the volatile effect or the transmission of taste, I believe it will be as you wish. There are more related products in vape that deserve your attention and look forward to your further understanding.

I would like to recommend you:
vandyvape requiem rta
caliburn tenet

The Elf Bar BC5000 is a small box-style disposable vape renowned for its capacity, flavor performance, and its wide-ranging menu of flavors. Many regard Elf Bar as a brand to have some of the best flavors on the market.There are more than 45 flavors to choose from with the BC5000.Click the link to learn more: Elf Bar BC5000 Flavors Review.

Adopting VOOPOO technology, DORIC 20 SE brings you a professional mouth-to-lung vaping experience. One DORIC 20 SE' s cartridge will last 10 day's vaping with a rather economical consumption. With the built-in 1200mAh battery, Doric 20 SE supports 3 days' vaping after one-time charging. The ingenious cavity design prevents the condensate from leaking down to the battery and reserves it at the bottom of the coil. An innovative airflow controls the airflow precisely and solves the leakage problem.

With the built-in 1200mAh battery, Doric 20 SE supports 3 days' vaping after one-time full charging. You will enjoy more vaping time while suffering less charging fuss. Owing to the stable output power control, DORIC 20 SE brings you a stable taste from the first to the last puff, no matter if it is fully charged or in low battery.

More Details of VOOPOO Doric 20 SE
Device Material: Aluminum Alloy+PCTG
Output Power: 8-18W
Output Voltage: 3.2-4.2V
Device Resistance: 0.5-1.2Ω
Battery Capacity: 1200mAh
Capacity: 2ml
Material: PCTG
Resistance: 1.0 Ω
E-Juice Filling: Side-Filling



Recommended products:
blood orange mango e juice
coastal clouds peach tea

For more details regarding VAPORESSO CARE - CARING IN MOTION event please visit: https://www.vaporesso.com/activity/vaporesso-care

GeekVape E100i (Aegis Eteno i) Kit

E100i Kit is supported by powerful AS-Chip 3.0 and built-in 3000mAh battery with 100W stable output. It utilizes the stable output Buck-boost tech to create consistent flavor performance. There are Smart/Power/Boosting/VPC/TC-NI/TC-TI/TC-SS/TC-TCR mode for your option. The smart mode can automatically select the suitable output to bring you the best flavor and prevent coils from burning out. Equipped with 1.06 inch TFT color screen, it can clearly show you the necessary vaping information. Fit for 4.5ml E100 Pod with leak-proof top-to-bottom airflow and GeekVape P Coil, it can provide longer service life. It also supports the pod to be switched to tank with a 510 magnetic adapter. E100i features the 2nd Gen of Geekvape Tri-Proof Tech, IP68-rating water & dust & shock resistance to become compact and durable. It also has classic, durable and ergonomic brand-new design. Just get it.

Details:
1. Built-in 3000mAh battery with 100W max
2. Stable output buck-boost tech
3. Supported by powerful AS-Chip 3.0
4. Designed with intelligent working mode
5. Leak-proof pod, top-to-bottom airflow system
6. Designed with 4.5ml e-juice capacity
7. Fit for E100 Pod and P Series Coil
8. Supports the pod to be switched to tank with 510 adaptor
9. Classic, durable and ergonomic brand-new design
10. New GeekVape Tri-proof tech
11. IP68 rating water & dust & shock resistance




Digiflavor Drop RDA V2

Drop RDA V2 from Digiflavor comes with an upgraded space-capsuled metallic body, is fully metal-made for superior connectivity. The dual post build deck is designed with four large post holes to free up spaces for any size of coil structure. Featuring multi-air-inlet airflow adjustment, Drop RDA V2 can control airflow for DL & RDL perfectly. A BF pin is included.

Details:
1. Upgraded space-capsuled metallic body
2. Dual post build deck design with four large post holes
3. Fully metal-made for superior connectivity
4. Perfect airflow control for DL & RDL
5. Dual-coil DIY deck
6. Multi-air-inlet airflow adjustment
7. BF pin included

Been vaping on and off since 2015.
Latest attempt has been a full year thinking it might stick this time.
Mainly use Boro mods
Glad to be here.

So my go to vape juice supplier is no longer around. I was with them for about 10 of my 12 years of vaping. So I have no idea who else makes a good juice. I'm a mentholated fruit & mint flavor guy. I like my juices to have flavor, not just all sweetness. In years passed I've ordered fruit flavors from other vendors and it taste like I'm vaping liquid sugar, that's not my style. I like the flavor of the fruit, not the sweetness. A little sweetness is obviously OK, just not all of it.

I'm a 50/50, 6mg 1.0 ohm @ 13 watts guy. Any info for an 'ol timer is greatly appreciated, thanks!