Introducing NEW KangVape Onee Max 5000 Puffs from vapesourcing - Disposable Vape is a pre-filled salt nic vaping system that is convenient and compact. Draw-activated, lasts for about 5000 puffs and has a powerful 1000mAh battery to support that. It contains 18.5mL - 20mL of 50MG (5%) of salt nic juice and comes in a variety of flavors. Kangvape Onee Max cheapest prices online.

The powerful Kangvape Onee MAX disposable vape pod is a device without the hassle or worries of refilling. This device features a draw-activated firing mechanism, the Kangvape Disposable Pod Device is a pre-filled nicotine salt e-liquid disposable vape. It contains 5% (50mg) nicotine salt strength and a small discreet profile that will fit in the palm of your hand. It’s a perfect device for those who are always on the go and don’t like carrying a lot of stuff for their vaping needs. The best part is... the Kangvape Onee MAX is rechargeable, so you will get the best bang for your buck!

This Kangvape Onee MAX device can simply be used and thrown away. This device is gaining popularity due to the process which is similar to traditional smoking – used and thrown. Another reason for its success, its convenience, small in size and minimal operation. Check out our collection of disposable vape bundles!

Features:
Approximately 5000 Puffs
1000mAh Non-Rechargeable Battery
18.5mL - 20mL of 50MG (5%) Salt Nic Juice
Package includes 1 x KangVape Onee Max 5000 Puffs Disposable Vape



Recommended products:
daze ohmlet
lucid air vape

Can anyone help me, Im new to vaping. Im using the OBS cube pro. how low the resistance can go? I have coils with 0.12ohms when i put 2 coils in my automizer. i get short circuit error. but when i put only one it works. i tried putting the other side if its the issue but it also works fine. i also put the other coil if its the issue but it also works. the only time i get short is when i put both.

Lost Vape Ursa Pro Pod Kit

Ursa Pro Kit is powered by Lost Vape Quest Chip and built-in 900mAh battery with 25W max and Type-C charging. It is the first to bundle both integrated coil & changeable coil system in one kit set. With the increased step-less adjustable airflow range, it can bring you MTL, loose MTL and RL airflow range. Ursa Pro has 2.5ml e-juice capacity and easy side filling system. It is fit for Lost Vape Ursa Empty Cartridge, Ursa Nano Pod, and UB Mini Coil. It is also features glossy anodized dual-tone CMF and on trigger breath-pulse LED design. The multiple protections can also guarantee the safe use of the kit.

Details:
1. Built-in 900mAh battery with 25W max
2. Supported by Lost Vape Quest Chip
3. 0.42'' OLED screen, Type-C charging
4. Large step-less adjustable airflow range from MTL to RDL
5. Salt/freebase compatible
6. 2.5ml e-juice capacity, easy side filling system
7. Supports integrated coil & changeable coil system
8. Bundled 0.8Ω changeable coil for MTL & Salt Nic users
9. 0.6Ω integrated coil for loose MTL - RL range for freebase society
10. Fit for Ursa Empty Cartridge, Ursa Nano Pod, UB Mini Coil
11. Glossy anodized dual-tone CMF, elegant and attractive
12. On trigger breath-pulse LED, auto draw/manual fire
13. Short-circuit/weak battery/over heat protection




SMOK IGEE A1 Kit

IGEE A1 Kit is powered by a built-in 650mAh battery with 14W output and Type-C charging. Designed with the single LED indicator with four colors varying, it can clearly show you the real-time state of the device. The dual-side airflow can also bring you an intoxicating taste. Fit for IGEE Meshed 0.9Ω Pod, IGEE A1 can bring you faster heating, fuller atomization and ultimate flavor. It also features 2ml e-juice capacity, easy top filling system and leak-resistant technology. With the childproof lock design, it will bring you worry-free use.

Details:
1. Powered by built-in 650mAh battery, Type-C charging
2. Equipped with SMOK IGEE Meshed 0.9Ω Pod (2ml)
3. Mesh structure coil, faster heating and fuller atomization
4. Dual-side airflow design for intoxicating taste
5. Top filling system, leak-resistant tech
6. Childproof lock design for worry-free use
7. LED indicator to show real-time state of the device
8. Multiple protections to ensure the safe use
9. Aircraft-grade aluminum, handy and durable

OK. Sorry for all the tests. We are just trying to figure one thing out here. Please delete but give us like 3 hours lol.

This test is to see if the up/down vote arrows appear on every post like they do on the REAL question thread tha twas posted in this same for.

I am taking a joy ride and don't know how many mods I should take. I don't do pods!!!

Do I need backup for my squonker??? And should I take a backup for the backup???

How much juice should I take with me???

Guess I should take some extra batteries too???

Not sure how long this ride will be yet!

So... it could be a short or a long ride.

Ummm, I was married for nearly 40 years and that's the kind of thing she would do. "We're going for a short ride to one store". Lol, famous last words after being out for hours and 6 stores later!

---

Ok, on the serious side, this is a TEST to see how long it takes for XF up/down voting options to show up.

@UncleJunkle has another thread going but because solutions were found and then unsolutioned we don't know if that may have confused the all powerful XF.

---

So, please, answer my questions with the goofiest answers you can think of!!!

I'll just let the thread sit to see when up/down voting comes into play.

@classwife can delete the thread once we know what we need to know.

This is just a test question to see how the question function works from the point of view of the question asker. Please respond. Thanks

How many clicks to turn on/off most vape devices?

I've having issues with my Vapefly Alberich, it produces a sort of burnt flavor after vaping for less than a day (I'm guessing about 10 refills with the 3ml plastic tank). The cotton is fine, but there's plenty of residue on the coil. I've tried using plain 3.0mm inner diameter spaced coil and the included plain 2.5mm inner diameter contact coil, the result is the same. Tried using my own cotton and the included cotton likewise. I do not trim the ends of my wicks. I've tried cutting the wicks shorter than the build deck by about 2 mm on each side at the risk of flooding (luckily, no flooding happened), same issue. Vaping at 15W. Tried using 2.6mm and 2.0mm airflow pins, no change.

With the same store-bought e-liquids, I haven't had this issue vaping just as much on my Geekvape Zeus DL RTA, cleaning the coil maybe once every 5 days after vaping all day at 20W. The coils I use in the Zeus are plain 3.0mm inner diameter spaced.

I'm guessing the "burnt" flavor is coming not from the cotton, which is fine when I change it, but from the residue on the coil. However, the Zeus builds up residue about 5 times slower. I'm a chain vaper. Does anybody have any insight into why this might be happening?

So i recently got a nice Voopoo vmate pod it was working great but then after 1 week, it is just blinking green light for 1 second when i inhale it and no vapor. Any fixes that can help? Thanks

I know you may have just recently seen my review on the Argus XT and might wonder why I didn’t combine it with this review on the Argus MT. Well, Voopoo requested two reviews so that is what I’m doing. They have always been excellent to deal with so I don’t mind accommodating their requests. Now that I’ve explained that, let’s talk about the Argus MT. The MT is very similar to the XT but not identical. The MT has an internal 3000mah battery with a max of 100 watts where the XT uses an external battery. It is IP68 tri proof and has a 5v/3A fast charge rating like the XT. It also is powered by the Gene. TT 2.0 chipset and has Smart, RBA, Turbo, and TC functions. The MT kit comes with the same MAAT tank as the XT comes with so I will just copy that information from my previous review in case some didn’t read the other review.




WHAT’S IN THE BOX?

1* Argus MT Device
1* Maat Tank New 6.5ml
1* TPP-DM2 0.2ohm Coil
1* TPP-DM4 0.3ohm Coil
1* Type-C Cable
1* User Manual
1* Glass Container
1* Silicon Rubber Pack

SPECIFICATIONS:

Tank Size 26*52mm

Tank Capacity 6.5ml (standard)

Tank Materia Stainless Steel+Pyrex

Tank Resistance TPP-DM2 0.2ohm, TPP-DM4 0.3ohm

Kit Size 145*40*30mm/td>

Kit Material Leather+Zinc Alloy

Output Power 5-100W

Output Voltage 0-8.5V

Kit Resistance Range 0.05-3.0ohm

Charging Voltage Type-C 5V/3A

Battery Capacity 3000mAh built-in battery

Color Pearl White, Graphite, Carbon Fiber, Lime Green, Dark Blue

FEATURES:

1. 100W max power, 6.5ml capacity

2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof

3. Ingenious crater leakage proof structure

4. GENE.TT 2.0 chip, QS lock

5. Built-in 3000mAh battery

6. 3A Type-C fast charging port with dust-proof cover design

7. Holeless appearance, lanyard ring design

8. Two-way airflow brings easy deep DL vaping

9. Easy top filling design

10. Multiple modes: Smart, RBA, Turbo and TC

11. Compatible with all TPP coils

12. BMS real-time battery protection

13. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection

INITIAL THOUGHTS:

The packaging for the MT is exactly the same as the XT. It comes in a very nice metal tin with an outer sleeve slid over it. The sleeve has a color picture of the device contained inside. I received the white version. As a matter of fact it is so white that it made it a little difficult to photograph. I won’t be carrying this one at work since my hands get dirty and don’t want to transfer that to the mod.

Once opened, the MT mod is visible along with the MAAT tank, spare glass tank section, and accessory box all mounted inside a plastic insert. Inside the accessory box is a USB-C charging cable and the two included TPP coils. One is the TPP DM4 .3 ohm rated at 32-40 watts and the second coil is the same TPP DM2 .2 ohm coil rated at 40-60 watts as what came in the XT kit. Underneath the mod is a bag of o rings and seals.

There’s no battery adapter with this one since it has a built in 3000mah battery. It is rated at a charge rate of 3A. It does seem to charge fast but when it had about 50% battery when I received it, I plugged it into my Klein USB tester with my Geekvape fast charger and it wasn’t pulling anywhere near 3A.

The Argus MT has very little branding. The Gene TT name is printed on one side with nothing on the other. The leather like material on the back has the ARGUS MT name stamped into it with the mountain symbol above the name.

The 510 top plate is shaped like the mod just like the XT was. It will allow up to a 28mm tank. In the center of the connection is the gold plated and spring loaded center pin. This one also has the lanyard ring on one side. I don’t mind it as much on this one as it seems to give my finger something to rest against and this mod is lighter than the XT. Since the MT has a built in battery there isn’t a battery door on the bottom but instead is a rubbery grey insert. I’m guessing this is to keep it from sliding around on a table or desk.

The adjustment buttons on the MT are a rocker type switch much like the XT but are positioned horizontal instead of vertical and on the MT they are marked with a + and – symbol. The MT also has the flip down cover for the USB-C charging/update port for a seamless design. One thing I thought I might mention is if you do ever need to do an update then you need to use the included cable and it has a triangle on one side of the C connector. This triangle needs to face down in order to do the update.

The chipset and display are the same on the MT as they were on the XT but in case you didn’t get a chance to see my other review then here are the display and button/menu functions.

The display screen gives the following information.

SET WATTAGE

MODE OF OPERATION(SMART, RBA, TURBO, TC)

BATTERY LEVEL INDICATOR WITH PERCENTAGE DISPLAY

PUFF COUNTER

COIL RESISTANCE

OUTPUT VOLTAGE WHILE FIRING

LENGTH OF TIME OF CURRENT PUFF

Just like about every Voopoo mod that I remember trying, if you leave the MT sit for several minutes then go back to use it then you have to push the fire button twice to fire it. They have a built in safety so if it gets hit by accident once then it just wakes the mod up but doesn’t fire. I’m not a big fan of this feature but I understand why they do it.

The menu system for the XT and MT are the same and use the same Gene TT chipset. The menu and button operation are as follows.

Press the fire button five times to turn the mod on/off

Press the fire button and – button to do a puff counter reset if you don’t want to do it through the menu

Press the + and – buttons to enter the menu system where you can choose between Mode, Setting, About Device, and exit

In Mode selection you can choose between Smart, RBA, Turbo, or TC

In the Setting selection you can reset the puff counter, choose to adjust the screen brightness or change the display type

Each of the four modes is displayed in a different color.

Turbo = Red

Smart = Orange

RBA = Blue

TC = Green

One thing that is different on the MT is that the QS Lock switch is built into the bottom portion of the screen and only has two positions instead of three like the XT has. The left position has the mod unlocked and the right position locks the device.

Ok, in case you didn’t see the MAAT tank information on my other review, here it is again. The MT kit included a DM2 .2 ohm coil like the XT kit did but also came with a DM4 .3 ohm coil rated for 32-40 watts. I really like the DM4 coil for battery longevity.

As always, it’s definitely always a good idea to break down a tank as far as possible for cleaning so that’s what I did with the MAAT Tank. It comes with what I consider to be a very nice 810 drip tip with a stainless beauty ring on the bottom to match the tank. The o rings are on the tip on this one rather than inside the top cap. The top cap on this one is a little different than most bayonet style caps I’ve seen on most tanks where the center is how it locks in place. On the MAAT tank there is a lip sticking out on either side of the outside edge of the underneath side of the cap that locks onto the body of the tank with somewhere between 1/8 and ¼ of a turn. This can be seen in the second picture below.

The top of the fill ports is covered by a gasket with a small hole in each side. I know some people like these gaskets but I personally don’t. If you’ve ever tried to fill a tank with a gasket with a glass dropper then you know it makes quite the mess. However, I also use some 10 and 50ml dropper bottles that work fine with this type of fill system. The MAAT tank has a capacity of 6.5ml.

The TPP coils simply push into the bottom of the tank to seal and then the bottom cap that contains the airflow control is screwed on. The inside of the base has three gold plated contacts to help transfer the power from the mod to the tank. There is a complete range of TPP coils that can be used on the MAAT tank.

The airflow of the tank mimics the design of a volcano to prevent leakage. The actual airflow control on the base is rather different from other tanks I’ve seen. There are two metal sliders that protrude a little to make it easier to adjust the airflow. The two openings are quite wide and allow massive amounts of airflow. There are vertical lines on the airflow slider on the MAAT tank that came with the XT to help the user keep track of where it is set but I noticed on the tank that came with the MT that it did not have those markings. Not really necessary but a nice feature none the less.

FINAL THOUGHTS:

The Argus MT kit is another great kit in my opinion. With it having the same Gene TT 2.0 chipset and operation as the XT it’s hard to go wrong. The MT is a bit lighter than the XT and has a really good hand feel in my opinion. I mentioned earlier that I’m not a fan of lanyard rings but on this one it is actually nice to give my pointer finger something to rest against when holding it and it also helps to keep the mod from slipping out of my hand. Just like the XT, I wish the bottom display numbers were a little larger for people like me that don’t see as well as we used to.

The .3 ohm coil was probably my favorite out of the two. It was reading .36 on the MT and I was able to comfortably run it at 35 watts with the airflow mostly choked down. The flavor is really very good and at this lower wattage the vapor production isn’t quite as large as it is with the .2 ohm coil. The .2 coil is very good also and found myself eventually running it at 54 watts after a few days of use. It also produced very good flavor and even larger amounts of vapor. I’m sure if you like a warmer vape then you could run this one much higher. I still only had the airflow about ¼ open.

I really don’t mind that the MT has a built in battery with a 3000mah rating. Some people may turn their nose up at built in battery mods but I honestly can’t think of one mod with a built in battery that has quit on me due to the battery being bad.

So, would I recommend the Argus MT for you? If you like or don’t mind mods with built in batteries then definitely yes. Whether you decide to purchase the kit or just the mod, this is a really good one in my opinion. I wish all mods came with a lock switch.

I’d like to thank Voopoo and Nical for sending the Voopoo Argus MT kit for this review. Thanks also to those who choose to take the time to read my reviews. I hope I have helped you decide if this is a good fit for you. If you’d like to look a little more then there’s a link to the website below.

ARGUS MT XT-VOOPOO VAPE Spark Your Life

Hi all I'm a new member and currently working to bring reviews and adive where I can and I hope to he a good part in the vape community

The H45 is great but there are two problems:
1) You cannot see the liquid level unless you remove the pod.
2) After you remove the pod and put it back in, you cannot vape straight away because the device is locked on "New coil" and you need to press the + button to be able to vape again.

That can be resolved by simply cutting about 3mm off the top of the case with a dremel or similar cutting device, and sanding it down with the sanding attachment.
It leaves bare aluminum metal but you can blacken it with a black permanent marker or car touch-up paint.
It doesn't affect the rigidity since the pod uses magnets to secure it down and it still has a deep footing after cutting off the top.

Now all you need to do is tilt it left and right and now you can see the liquid move to determine the juice level

ELF BAR BB3000 & BB3500 Disposable Pod Device which can fire out 3000 / 3500 puffs. The ELF BAR BB3000 / BB3500 Disposable Pod Device has 650mAh rechargeable battery and 12 flavor choices.

Today I would like to review two VOZOL disposable cigarettes, the VOZOL ALIEN 2 Disposable and the vozol bar lite disposable. Both disposables offer you 600 puffs. You can also make your choice by comparison.


Start with the vozol alien 2 disposable, a unit that offers 450mAh. And has the regular 2ml of vape juice with 20mg of nicotine.


Grape Ice is a light and sweet grape flavour with a cold taste. A hint of sweetness lingers on the tip of your mouth long after you've finished enjoying it.

Blue Razz Ice is a sweet taste of blueberries with a cooling sensation on the inhale. Menthol Breeze is a cool, refreshing flavour with a minty, cooling sensation and an icy taste that clears the mind immediately.

The vozol bar lite disposable is a 550mAh pre-charged battery for power and activates the device by inhalation. This disposable offers you six flavours, infused with mint, ice, dessert and fruit.

Lemon Tart top note will feel heavier with the sweet lemon taste, followed by the sweet taste of the tart on the nose.

Pineapple orange is a collision between sweet and sour pineapple and mellow orange. The sweet and tangy fruit flavour will surround you for a long time.

From the point of view of use, none of them has a flashy operation, everything just needs to be done with your mouth. Their light and compact size also allow you to take them out at any time, in a sophisticated and stylish way.

More hot sale disposables:
lost mary bm600 price
hot sale elf bar gee

T200 Kit is powered by AS Chip 3.0 and dual external 18650 batteries with 200W max and Type-C charging. Designed with a 2.4-inch full touch screen, it has 4 vivid UI themes and Power, TC-SS, TC-TCR (VPC, Smart, Bypass) output modes for your option. By adopting the new Tri-proof tech, GeekVape T200 becomes more compact. The IP68-rating water & dust resistance and a higher level of shock resistance also make it durable in use. GeekVape T200 is equipped with Z Sub Ohm Tank 2021 that features 5.5ml capacity, top filling, and top-to-bottom airflow system. It is also fit for Geekvape Z Coil with double service life.

Sourcemore × GeekVape T200 Kit Giveaway, 3 winners, ends on Sept.1st, 2022

Enter here

Elf Bar TE5000 Disposable Pods are made in a compact rectangular case made of metal and plastic. The case of the device are made in a transparent form for a partial demonstration of the filling of the device. The novelty is characterized by small dimensions and ergonomic shape. There are 15 flavors to choose from.

This brand new disposable vape from Elf Bar comes in a multitude of great flavors. Elf Bar BB3500 Rechargeable Disposable Kit utilizes a Micro-USB charging port that allows you to enjoy your vape to the last drop.

Features
• 10.5ml e-juice
• 650mAh Built-in Battery
• 5% Nicotine Strength
• Draw-activated

Feels so good in your hand, with its silicone texture and contemporary design. The mesh coil makes it also come together with maximum performance and 3500 puffs you can depend on.

Please visit best online vape shop to get the cheapest vapes.

You may also like:

esco bars noms
CBD vape pen og kush

The KROS Nano is a 5000 puffs rechargeable disposable vape powered by vape store near me, and based off the popular Vaporesso Xros Nano. The KROS Mini contains 13ml of 5% salt nicotine vape juice, a 650mAh battery, and a USB-C charging port. This draw activated disposable comes in an anti-leaking packaging, and is available in a number of great flavors.

Have you experienced a time where your favorite vape pen was running out of puffs? Maybe you wanted to finish vaping before going to bed or finishing the day, but you weren’t able to get enough hits. This is where the new Kros Nano comes in. With 5000 puffs, it’ll be atleast a week before you throw this device away.

On top of that, this is the best product for your price. You won’t find another vape with this many hits at such a low cost.

The Kros Nano is disposable vape that has seen success since its recent release (and continues to grow in popularity) for its high-quality materials, excellent performance capabilities, and aesthetically pleasing appearance.

Specifications:
Capacity: 13mL
Total mL per box: 78mL
Salt Nicotine: 5%
5000+ Puffs
Rechargeable
Premuim Mesh Coil



Recommended products:
elf bar airo max
esco bars mega 5000

Johnny's Juice; Hooch 125ML/3MG (A special concoction of pineapple & pomegranate turned in to a moonshine.) Vaped a couple ML's, not my thing.
Sadboy; Butter Cookie 100ML/3MG (Sugar Cookie). Vaped a couple ML's, not my thing.
Kings Crest; Sugar Cookie 100ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.
Glas; Sugar Cookie 60ML/3MG (Sugar Cookie). Vaped a couple of ML's, not my thing.

All juices are 70VG or higher. Johnny's purchased 6/22, all other juices purchased 8/22.

$40 (PayPal or Zelle), I prefer Zelle.
Shipping: Free (US ONLY)

Thanks!

I’m getting way too frustrated just trying to post a question or respond to a message. The pages and options are just too much for this old timer. Sometimes they say simpler is better. And I’m this case I’m going to have to agree.

I just got onto another site where everything things seems so intuitive at this point. Maybe ECF will be that way again today but I can’t give myself a stomach ulcer every time I want to post something

I’ll keep trying but I don’t want to hear a word unless it’s to help me.

I love change. Actually no I don’t but that’s the Taurus earth sign in me. Change is scary but I’m sometimes pretty quick with picking up new technologies. Here comes the “however” bit…. If I was even slightly computer illiterate or flummoxed easily I’d give up with this site. I’m hopelessly lost. Seems easy things should be easy and difficult things well… more difficult. But this format has it all turned upside down. Maybe there’s too much information for it to sync with so quickly. I hope. And maybe it’s just my old senile style brain cells.

But thank you to everyone who put many obvious hours into. I do appreciate each and everyone of you

Hi everyone - 9-year vaper here. I need to get some new vape equipment, but am totally lost with all this high temperature mega wattage stuff they have in the stores now. I use an Aspire CE with an iStick mini. I'm down to my last box of coils and my last iStick is on the blink. Went to a vape store and was totally lost with all the big-and-fancy stuff and the guy told me nothing is going to hit like what I'm looking for. What are "old school" nic vapers using these days that still has the cooler, gentler hits of the old equipment? Thank you!!

CLICK HERE TO BUY GLAMEE META DISPOSABLE DEVICE(6000 PUFFS)

Features:

• Puffs: ~6000
• E-Liquid Capacity: 20ml
• Battery Capacity: 800mAh Rechargeable
• Nicotine Salt: 5%

LABOR SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (LABOR15) TO GRAB 15% DISCOUNT STOREWIDE

10 x wick liquor kirumu yoghurt £70 shipped

4 x bams cannoli £40 shipped

2 x supergood cocktail range £25 shipped

11 x deep cuts, 9 blueberry hill, one psycho cruller, one P.B. Party £150 shipped

All unopened and good dates on them

Hi, let's take a look at Suorin Kidaki Prefilled Pod. In this Test I will examine each of the characteristics that distinguish this item. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Suorin Kidaki; Before starting let's see together some special features indicated by the manufacturer:
• Elegant, powerful and lightweight stick design
• Sturdy aluminum construction
• 2ml Magnetic Disposable Cartridge (TPD)
• 1 Coil of 0.8Ω Ka1 replaceable every 3 refills with the same e-liquid
• Wide choice of 20mg / ml flavors
• 500mAh battery
• Type-C fast charging
• Battery Led
• Safety Protections
• MTL Puffs

► Suorin Kidaki; Packaging:
The package in black / green, show on the front; The image of the device (battery body), the manufacturer's logo, the full name "SUORIN KIDAKI" and general nicotine warnings.

On the back of the package there are; the Chinese export brand, some battery specifications, Shenzhen Youme Technology (Suorin) address, a bar code, more warnings and numerous international legal logos / marks. The remaining sides of the package contain the following information; the device name, batch number and production date.





► Suorin Kidaki; Packing List:
• 1 Kidaki 500mAh device
• 1 Type-C charging cable



* I must say that this being most likely a SAMPLES of PRE SERIES, perhaps definitive or not, the packaging for the sale of refills may undergo changes. I thank Suorin and April for sending me many 2ml TPD flavors for my test. Each flavor I received includes 3 cartridges to be used with one and only Coil. The definitive device will most likely be sold complete with a battery, a 2ml cartridge and a coil.



► The flavors I received for the test are:
• Cotton Candy
• Blueberry Ice
• Banana Ice
• Watermelon Ice
• Grape Ice
• Cream tobacco
• Blueberry Raspberry
• Strawberry Banana
• Energy Drink Ice
• Spearmint



► Suorin Kidaki; Specifications:
• Dimensions: 107x19mm
• Weight: 35g
• Materials of construction: Aluminum + PCTG
• Pod: Preloaded 2ml (TPD)
• Coils: 0.8Ω Ka1 replaceable x 3 refills
• Battery: 3.7V 500mAh
• Refill: Type-C
• Led: 3 battery level lights
• Safety protections



► Suorin Kidaki; Available colours:
• Green
• Dark green
• Dark Blue
• Blue
• Light blue
• Grey
• Dark gray
• Red



► Suorin Kidaki; First Impressions:
I thought Kidaki was yet another disposable device pre-filled, and builded by super cheap type of plastic. When the package arrived I was immediately surprised by its elegance, but also by the presence of a Type-C charging socket on a beautiful metal pen-shaped device. This is all very good, but it is unusual for this type of products. Later I saw in the other box that I received numerous refills and even replaceable coils! What a sight, I said to myself "Suorin does things big". Opening the kidaki package I saw that there was only the battery inside. I immediately wondered what the final packaging was? Answer, probably the sale of Kidaki in TPD countries will be one device + one 2ml cartridge for every taste. I was very curious and I immediately wanted to see this Kit better, I installed a coil and I slipped the cartridge into the Kidaki Mod. Before seeing how this Kit is made, and going into details, I appreciated the qualities of Kidaki Stick kit that are ; extremely easy to handle, elegant appearance, very low weight, sturdy aluminum body and transparent cartridge. Speaking of handling; Kidaki disappears in the hand and can be vaped without finger support, even while riding your bike! Kidaki Kit is extremely comfortable.



► Suorin Kidaki; How it is made:
First of all I must point out (the most attentive will have already noticed) that this KIDAKI by SUORIN is actually a KIWAKI by VAPSI! The two companies Suorin & Vapsi have in fact collaborated together to create this product and will market it under a slightly different name. So KIDAKI by Suorin and KIWAKI by Vapsi have the same characteristics! Now analyzing the kit; on the flat side we find the magnetic cartridge with the flat front profile to continue the lines of the front side of the Mod. The writings; (in my sample) Vapsi, Kiwaki, 3.7V, 500mAh, made in china, the disposal logo and the C E mark. Finally, the signaling LED. On the top side at the 3/4 there are two tiny opposing holes for the passage of air towards the coil.



► Suorin Kidaki; Type-C and Led:
The 5V / 2A Type-C charging socket takes a very short time to complete the charge of the 500mAh battery. The signaling LED lights up according to the state of charge of the battery as follows:
• Green Led: High level
• Blue Led: Medium Level
• Low Level Red Led



► Suorin Kidaki; Pod compartment:
On the bottom of the compartment there are two magnets; one large in the shape of a crescent and one opposite with the function of stabilizer, these magnets perfectly copy the lower metal profile of the tank. Continuing to look at the bottom of the compartment you can see; two holes for the air flow coming from the outside, the automatic puff sensor which is raised above the base to avoid filling with condensation and the two pins for the electrical contact which are gold plated and spring loaded.



► Suorin Kidaki; Pre-filled cartridge:
The disposable cartridge is made of transparent PCTG, this allows you to view the level of the internal e-liquid. Originally each cartridge is supplied with two black silicone plugs, one of these plugs is used to prevent impurities from entering through the Drip Tip and the other plug is used to make the lower part watertight where the coil will be inserted. Right in the lower part there is an interesting membrane valve system, this valve prevents the liquid from escaping when the coil is disconnected, while when you insert the coil the membrane is pushed upwards allowing the internal liquid to come into contact with the coil cotton. After inserting the coil into the cartridge and while you wait the usual 10 minutes before starting to vape, you can also extract the coil to check that the cotton is wet and without spilling a drop, in fact by extracting the coil the membrane continues to guarantee the seal watertight.





► Suorin Kidaki; Final conclusions:
Having this sample available for review and not finding any cover or technical images on the web, I had to make some images to better represent the product and create them myself and then add them to the ones I took. I also thought that this sample could only be a pure exercise in style, or a sort of examination of Suorin & Vapsi to take the pulse of the market. However I really hope that this product will soon be distributed on all TPD markets, because in the opinion of the writer it really deserves it and more than any other disposable Pod, good or not good that I have tried so far.

This Suorin & Vapsi project, has some really interesting and advantageous features compared to the disposable products that are invading the market. One of the most interesting aspects of Kidaki is undoubtedly the possibility of being able to recharge the mod through a fast Type-C charging port, many vapers remain doubtful about the devices that do not have the charging port and that guarantee optimistic puff estimates before throw the whole device in the basket ... With kidaki this does not happen, you can in fact consume every last drop of e-liquid (which is visible) and charge and recharge the battery as many times as you want. Furthermore, the presence of a replaceable TRUE coil capable of withstanding at least 3 refills (6ml) guarantees excellent performance. All the liquids that I have tasted and that have been sent to me really seem to be all delicious with lots of flavor and with a strong hit in the throat! I hope to see Kidaki on the market soon, in the meantime keep your eyes peeled because if you are looking for the best MTL e-cig with liquid pre-loaded TPD cartridges, you should wait confidently because you have found it! This is Suorin Kidaki alias Vapsi Kiwaki.

Thanks to Suorin and April for sending me this sample for review.

Thanks for reading.