Marvos X Kit by Freemax is a pod mod kit, coming with Marvos CRC Pod and Marvos X 100W Mod, while Maxus Solo 100W Kit is a box mod vape kit, consisting of Maxus Solo 100W Mod and Fireluke Solo Sub Ohm Tank. But both of them have a fantastic lighting design. As for you, which one do you like better?



As for Marvos X 100W Kit, it comes with 2 color modes (multicolor and unicolor) and 10 LED modes, including alternate, always on, circle, drop, flash, gather, rise, spread, Tetris, and waterfall, then you will get 20 combinations of light effect. In unicolor mode, there are three sliders for you to adjust the RGB values and then create your desired color. Besides, you can adjust not only the light brightness but also the speed at which the light effect changes, so as to customize your distinctive light effect.

As for Maxus Solo 100W Kit, you can choose your favorite light color from the 9 default colors or customize it by changing the RGB values. Not only can you choose the color at will, but also whether the light is activated or not and how it lights up, including 3 options: always on, breathing, or flashing, so as to create your own unique vaping style.

For more information about Freemax Marvos X 100W Kit here>> Maxus Solo 100W Kit | FREE MAX. FLAVOR MAX.

Indulge in the beautiful contrast color collocation of the Elf Bar BC5000 Disposable Device. Producing about 5000 puffs, it is equipped with a dual coil that provides the purest taste with extraordinary flavor. Enjoy an unprecedented user experience with the flagon-shaped design that houses the 650mAh battery. Worried about running out of power? You can recharge your BC5000 with a Type-C cable whenever your battery runs low, allowing you to enjoy until the very last puff.

Hello friends, we bring a new round of giveaways and the prize is the newVOOPOO Argus X Kit. We wish you like it.

The MT and XT kits feature Maat's new water tank, which features a new crater design to eliminate condensation, making it leak-proof, and a DL puff style for mass production of steam. Mesh coils are also said to bring fuller vape clouds while also optimizing the working temperature to enhance the longevity of these heads.

More details about this kit can see at Voopoo Argus XT&MT Vape Kit 100W 6.5ml

Simple to enter:

1. Do you like Voopoo vape brand products, which one do you like best?

2. Which new Voopoo brand products do you like best recently?

3. What is the favorite vape kit you like for Voopoo?

Note:
1. You must be 21 or older.
2. The contest will end on 07.09.2022 and one winner will be chosen via random.org.
3. Number your replies.
4. Each entrant with no more than 3 replies.

Eleaf FlasQ Kit

FlasQ Kit comes with the appearance of novel and unique flask-like, is an all-new pod mod vape with sleek and ergonomic design. It has 1370mAh battery capacity and 5ml e-liquid capacity. The dual u-shaped airflow channels enables it to deliver airflow directly, which will provide more concentrated and smoother airflow for an instant enhanced flavor. And the top airflow control can provide much more satisfying vaping experience without any e-liquid leakage. What's more, with push-pop mechanism, you can push the mouthpiece to replace coil easily. Eleaf FlasQ Kit is compatible with all GTL coils, and two new black GTL coils are included in the package.

Details:
1. Novel and unique flask-like shape
2. Compatible with all GTL coils
3. Solid all-metal body
4. Dual-shaped airflow channels
5. Top airflow control
6. Innovative push-pop mechanism
7. Top filling, 5ml capacity
8. Ergonomic and compact
9. 1370mAh battery capacity
10. USB Type-C charging port




Hellvape Dead Rabbit M RTA

Dead Rabbit M RTA is the cooperation between Hellvape & Vapers Brazil. It is designed with top-to-side interlayer honeycomb airflow to avoid leakage, provide smooth airflow and concentrated vapor. It is easy for you to build the mesh coil or normal single coil with the multi-functional coiling rod. 0.15ohm mesh wire and 0.25ohm mesh wire are included in the package. The e-juice capacity is 3ml with straight glass tube, 4.5ml with bubble glass tube.

Details:
1. Designed by Hellvape & Vapers Brazil
2. Top-to-side interlayer honeycomb airflow
3. Postless ceramic deck, easy to build coil
4. Mesh coil/normal single coil building
5. Convenient top filling system

Besides the 0.6Ω MESH Pod, the LUXE QS has a 1.0Ω MESH Pod included.
Also, it is compatible with both the 0.8Ω MESH Pod and 1.2Ω Pod from the original LUXE Q.

I have to say that I’m rather excited to be here with you today with a review of an actual mod/tank kit instead of another pod review. I don’t dislike pods but the market has become very saturated and I’ve reviewed a lot of pods. It’s a nice break to get a real mod/tank combination to break things up. So without further ado, I am here today to talk with you about the new Voopoo Argus XT 100W kit that was sent to me by Voopoo in order to provide a fair and honest review. Voopoo has come out with some really great products in the past so I have high hopes for this one. The XT mod is compatible with either 18650 or 21700 batteries and will deliver either 80 or 100 watts maximum depending on the battery installed. I personally think this is a smart and important feature. Too many times I’ve seen mods rated at 100 watts and only use an 18650 battery which in my opinion isn’t enough battery for 100 watts. The XT is powered by the Gene TT 2.0 chip and supports Smart, RBA, Turbo, and TC vaping modes. The XT is IP68 rated tri-proof and has a 3A Type C charging port with a dustproof cover. It also has the QS lock switch that I will talk about later.

The XT kit comes with the MATT Tank that has a liquid capacity of 6.5ml and has an easy top filling system. It uses a volcano crater structure design to prevent leakage and two way airflow for optimum DL vaping. The MATT Tank is compatible with the TPP series of coils.





WHAT’S IN THE BOX?

1* VOOPOO Argus XT Device
1* VOOPOO Matt Tank New (6.5ml)
1* TPP-DM1 0.15Ω Coil
1* TPP-DM2 0.2Ω Coil
1* Type-C Cable
1* User Manual
1* Glass Container
1* Silicon Rubber Pack
1* 18650 Battery Adapter

SPECIFICATIONS:

Battery Type: Single external 18650/21700 battery (Not Included)

Output Power: 5-100W

Output Voltage: 0-8.5V

Resistance Range: 0.05-3.0Ω

Charging Voltage : Type-C 5V/3A

Capacity: 6.5ml (Standard)

Filling: Top filling

Fit For VOOPOO Matt Tank New, VOOPOO TPP Coil

Color: Silver Gray, Graphite, Carbon Fiber, Lime Green, Dark Blue

FEATURES:

1. Holeless appearance and leather-metal mixed material

2. Designed with lanyard rings, convenient to carry

3. Turbo mod for extreme boosting vapor experience

4. Single external 18650/21700 battery with Type-C charging

5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode

6. IP68 rating tri-proof function, durable in use

7. Humanized QS lock to avoid accidental igniting or switching

8. 6.5ml e-juice capacity, easy top filling system

9. Adopts volcano crater structure to prevent leakage

10. Two-way airflow for easy deep DL vaping

11. Dual In One Tech 2.0 mesh coils with denser flavor and longer lifespan

12. Compatible with VOOPOO Maat Tank New and all TPP Coils

13. Seven safety protections to guarantee the safe use

INITIAL THOUGHTS:

Voopoo really did a nice job on the packaging for the XT. It is in a metal tin much like the container that the Argus II arrived in. There is a color sleeve over the metal tin with a color picture of the XT and a few features. Mine of course was marked as a sample.

Once the tin is opened, the Argus XT, Maat Tank, spare glass tank section, and the accessory box is visible in the plastic insert. Inside the accessory box is a USB-C charging cable and the two included TPP series coils. There is also an 18650 battery adapter already installed in the XT mod since it is capable of using a 21700 battery or and 18650 battery with the adapter.

I received the silver grey version for my review. I think it’s obvious why it’s called that but the padded leather like material on the sides is grey but the back stitched panel is green. On the left side of the mod is the GENE TT logo but there is no other branding on the right side. Stamped into the green material on the back is the ARGUS XT with a little triangle on the top that looks like a mountain or something. Near the top on the back side is a lanyard ring. I’ve never been a fan of lanyards myself and to me the XT seems rather big to be carrying it around on a lanyard.

It’s interesting to me that the 510 top plate was made to be the same shape as the mod. It is pretty large and will accommodate a tank with a base up to 28mm without overhang. The 510 center pin is gold plated and spring loaded.

The battery for the XT is loaded through the bottom of the mod via a hinged door. There is a door release with an arrow on it indicating which direction to slide it to open the door. I have also found it handy to slide this when inserting a battery to help it to close easier. Once opened for the first time you will find the 18650 adapter inside. I immediately removed it since I prefer to use 21700 batteries when I have the option. The only battery polarity marking is on the underneath side of the battery door contact.

The front of the XT is definitely the star of the show here. Near the top of the mod is the QS Lock Switch. When the switch is all the way to the left then it locks the device completely from adjustment and firing. In the center position it is unlocked and all controls are available. In the right position only the adjustment buttons are locked. I personally love this feature. It’s great to be able to just flip a switch and not have to worry about accidental adjustment or firing. It’s difficult to see in my picture but there is a symbol underneath each position of the switch to help you remember which position does what. There is a lock on the left, a dotted line in the middle, and a circle with a line on the right.

Below the QS Switch is the nice sized fire button that has a nice click and feel to it. The display screen is next followed by the +/- adjustment rocker switch. Near the bottom is a flip down cover that protects the USB-C charging/update port. It not only helps to maintain the IP68 rating but also gives the front of the mod a very clean and smooth appearance.

The display screen gives the following information.

• SET WATTAGE
• MODE OF OPERATION(SMART, RBA, TURBO, TC)
• BATTERY LEVEL INDICATOR WITH PERCENTAGE DISPLAY
• PUFF COUNTER
• COIL RESISTANCE
• OUTPUT VOLTAGE WHILE FIRING
• LENGTH OF TIME OF CURRENT PUFF

Just like about every Voopoo mod that I remember trying, if you leave the XT sit for several minutes then go back to use it then you have to push the fire button twice to fire it. They have a built in safety so if it gets hit by accident once then it just wakes the mod up but doesn’t fire. I’m not a big fan of this feature but I understand why they do it.

The menu system for the XT and MT are the same and use the same Gene TT chipset. The menu and button operation are as follows.

• Press the fire button five times to turn the mod on/off
• Press the fire button and – button to do a puff counter reset if you don’t want to do it through the menu
• Press the + and – buttons to enter the menu system where you can choose between Mode, Setting, About Device, and exit
• In Mode selection you can choose between Smart, RBA, Turbo, or TC
• In the Setting selection you can reset the puff counter, choose to adjust the screen brightness or change the display type

Each of the four modes is displayed in a different color.

• Turbo = Red
• Smart = Orange
• RBA = Blue
• TC = Green

Hopefully I have covered the XT mod well enough so we can now take a look at the MAAT tank that was included in the XT and MT kits but with different coils. The XT kit came with the TPP- DM1 at .15 ohms and the DM2 at .2 ohms while the XT came with the same DM2 .2 ohm coil but also included a DM4 which is .3 ohms.

As always, it’s definitely always a good idea to break down a tank as far as possible for cleaning so that’s what I did with the MAAT Tank. It comes with what I consider to be a very nice 810 drip tip with a stainless beauty ring on the bottom to match the tank. The o rings are on the tip on this one rather than inside the top cap. The top cap on this one is a little different than most bayonet style caps I’ve seen on most tanks where the center is how it locks in place. On the MAAT tank there is a lip sticking out on either side of the outside edge of the underneath side of the cap that locks onto the body of the tank with somewhere between 1/8 and ¼ of a turn. This can be seen in the second picture below.

The top of the fill ports is covered by a gasket with a small hole in each side. I know some people like these gaskets but I personally don’t. If you’ve ever tried to fill a tank with a gasket with a glass dropper then you know it makes quite the mess. However, I also use some 10 and 50ml dropper bottles that work fine with this type of fill system. The MAAT tank has a capacity of 6.5ml.

The TPP coils simply push into the bottom of the tank to seal and then the bottom cap that contains the airflow control is screwed on. The inside of the base has three gold plated contacts to help transfer the power from the mod to the tank. There is a complete range of TPP coils that can be used on the MAAT tank.

The airflow of the tank mimics the design of a volcano to prevent leakage. The actual airflow control on the base is rather different from other tanks I’ve seen. There are two metal sliders that protrude a little to make it easier to adjust the airflow. The two openings are quite wide and allow massive amounts of airflow. There are vertical lines on the airflow slider to help the user keep track of where it is set. Not really necessary but a nice feature none the less.

FINAL THOUGHTS:

I feel like Voopoo has really hit the ball out of the park with the Argus XT kit. I have very much enjoyed testing it and plan on keeping it in rotation for some time to come. It is packed with features but easy to use and performs very well.

I tested both coils with the same 3mg liquid that I have used many times for testing review tanks. The .2 ohm coil rated for 40-60 watts worked very well for me at 45 watts with the airflow at about ¼ - 1/3 open. I did go as high as 48 but eventually went back to 45. The flavor production was very good and it provided large amounts of vapor.

Next I tried the .15 ohm coil rated for 60-80 watts. Honestly those high of settings are a little out of my comfort zone but did push it into the lower 60 range just to try it. I eventually settled back to 53 watts with the airflow about ¼ open and liked it very much there. Once again, the flavor was very good and even larger amounts of vapor were produced. I kind of prefer the .2 ohm coil because of the operating range but this one performed very well also. I don’t think you could go wrong with either one.

The XT mod itself is fantastic in my opinion. There was no trouble with accidental opening of the battery door even after a few fairly hard taps on my desk. I love the QS lock switch that allows me to quickly disable the adjustment buttons or the mod completely. If I had one complaint on the mod it would be the size of the font on the lower end of the display screen. My eyes aren’t getting any younger and in lower light I had difficulty seeing the bottom of the display. I feel like the wattage display could have been a little smaller to allow for the bottom information to be larger.

I almost never use the Smart mode on any mod but definitely see where it is a good feature to have for beginners. I mostly used the RBA mode but did try the Turbo mode and it almost made the vape seem smoother or something. I understand it’s supposed to give a boost at the beginning but the entire vape seemed smoother to me.

So I think it’s obvious but would I recommend the Voopoo Argus XT kit for you? Definitely! There’s really not much to not like about this kit. I’d like to thank Voopoo and Nical for sending the Argus XT kit for my review. Thanks go out to you the reader and thanks for making it to the end. Below is a link to the website for your viewing pleasure.

ARGUS MT XT-VOOPOO VAPE Spark Your Life

CLICK HERE TO BUY GLAMEE LIGHTER DISPOSABLE DEVICE (6000 PUFFS)

Specifications:

• 6000 Puffs
• Meshed Coil
• E-Liquid Capacity: 20ml
• Battery Capacity: 800mAh
• Type C Charging

LABOR SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (LABOR15) TO GRAB 15% DISCOUNT STOREWIDE

Hey everyone, the site upgrades are now live! You can see more details on new features in this thread. Since everything is fresh and the dust is settling from the updates, if you see any bugs, need any help navigating the site, or have any suggestions, please let me know and I can help out!

Currently, we're still in the process of setting up reactions and those won't be finished until tomorrow. Please ignore any issues related to those for now.

Again, big thanks to everyone who helped make this update happen and hope you all enjoy the changes

CLICK HERE TO KILO X ESCO BAR 4K DISPOSABLE DEVICE (4000 PUFFS)

Specifications:

• Liquid 9.0 mL
• Nicotine: 50mg (5% Nic)
• Battery: Built-in 1500mAh
• 4000 Puffs Per Device

LABOR SALE IS LIVE NOW!!!!!!!!!!!
USE COUPON CODE (LABOR15) TO GRAB 15% DISCOUNT STOREWIDE

Hi, today let's take a look at the Freemax Marvos X 100W Kit. I will examine each of the characteristics that distinguish this item in this Test. I hope that by the end of this reading you may have understood this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Freemax Marvos X 100W Kit; Before starting let's see together some special features indicated by the manufacturer:
• 1. Fantastic lighting. Full Spectrum Vaping
• 2. Brand new FM COIL TECH 5.0 Double-D Mesh technology
• 3. Innovative parallel mesh construction, military grade SS904L mesh
• 4. Recently updated tea fiber cotton formula
• 5. Supports the MS platform
• 6. Fantastic processed leather panel
• 7. Four output modes: Power / Smart / VPC / Bypass
• 8. Child resistant top fill system
• 9. 0.96 inch OLED screen
• 10. Single 18650 external battery
• 11. USB Type-C port, 2A fast charging
• 12. Slide the switch to quickly lock / unlock the Mod
• 13. Two-sided airflow adjustable
• 14. Safety protections: Battery reverse / overheat / low voltage / short circuit / cut-off / overcharge / overcharge / over discharge protection



► Freemax Marvos X 100W Kit; Packaging:
The cardboard has a black background on the front and rear. The remaining sides create a broad spectrum multicolored effect. On the front we find a stylized image of the kit, the color of the sample, the Freemax brand, the name of the product, some main features in the form of icons and the general warnings on Nic. On the back of the package are exposed; the content, useful addresses of Shenzhen FreeMax Technology Co, LTD. More warnings on Nic. You can also see the social networks where FreeMaxtech carries out its sales promotion, and also the legal logos & trademarks.



On the long sides of the box you can see; The Marvos specifications, a barcode containing also a small image of this kit, the scartch & Check, and various warnings.



► Freemax Marvos X 100W Kit; Packing List:
• 1 * Freemax Marvos X 100W Mod
• 1 * Pod Freemax Marvos CRC
• 1 * pre-installed 0.15Ω MS-D Mesh Coil
• 1 * 0.25Ω MS-D Mesh Coil
• 1 * USB Type-C Cable
• 1 * User Manual
• 1 * Warning Card
• 1 * Warranty Card
• 1 * Desiccant sachet



► Freemax Marvos X 100W Kit; Specifications:
• Size: 33 * 31 * 137mm
• Weight: 116g
• Pod capacity: 5ml (standard)
• Resistance range: 0.1-3Ω
• Output power: 5-100W
• Output mode: Watt / Smart / VPC / Bypass
• Battery: Single external 18650
• Output voltage: 0.7-4.2V
• Input voltage: 3.3-4.2V
• Charging specification: USB Type-C, 5V / 2A


► Freemax Marvos X 100W Kit; Available colours:
• Gray
• Light Blue
• Black
• Navy Blue
• Brown
• Green



FreeMax with five different color combinations, offers 3 different types of frame colors matched to the CRC cartridge, and 3 different decoration styles.
The combination of "ancient and modern" to which the manufacturer refers is to be attributed to the fine leather decoration found on the handle of the Mod. The decorative style of the leather insert changes according to the choice.
● You can then choose 3 different decorations to match the color of the frame and the Tank:
• God of War; Inspired by Mars, the Roman god of war. Victory, Peace, Protection.
• Horse; Neptune the symbol of the God of the Sea. Honor, Nobility, Will.
• Eagle; Jupiter the symbol of the king of the Gods. Power, Freedom, Good omen.



► Freemax Marvos X 100W Kit; First Impressions:
Marvos X Pod Mod is the latest release from Freemax home, it can accommodate a single 18650 cell for an optimistic value of 100W of maximum power. The Mod is characterized by a very good handling combined with compact dimensions and a weight of only 116g, without giving up a sturdy zinc alloy frame and fine decorations. The Boost circuit of the Marvos X is capable of providing a stable output even when the battery level is low. Marvos also features Watt / Smart / VPC / Bypass modes. In addition, the Mod is equipped with a "Full Spectrum" LED lighting on the front, side and rear of the device. The LED can be set in a variety of ways, with an incredibly wide color spectrum of mixed colors, pulsed, alternating flashes and more. Of course, the lighting can be completely deactivated by making only the display illuminated.

The Marvos CRC Pod has 5ml (2ml TPD) e-liquid capacity, with child-proof safe top filling. This tank adopts the latest evolution of MS Mesh Coils called MS-D with double high potential mesh. The "Double Mesh" solution can undoubtedly lead RDL and DTL vaping to the production of huge vapor clouds with wonderful flavors. As for Freemax, it was the first company to believe in Mesh Coils by constantly developing them and quickly becoming the reference standard. You can't go wrong choosing Freemax coils and tanks. I am currently having a lot of fun with both the Pod Tank Marvos CRC of this review and with the updated Tank Fireluke which is installed on the Maxus Solo 100W Mod of which you can read my impressions here: https://www.svapo.it/discussione/ 122185-freemax-maxus-solo-100w-kit /



► Freemax Marvos X 100W Kit; Screen and control keys:
The screen surrounded by LEDs extends over the entire front profile of the Mod. The transparency of the screen allows you to see the internal chip. The FIRE key is located at the top, slightly protruding and rectangular in shape, the same design is reserved for the adjustment keys "+ and -" which are located at the bottom and above the Type-C charging port.



Marvos X also implements the locking function of the Mod via a sliding button located at the bottom under the Type-C charging socket. This key may seem useless, because you can lock the keys while continuing to vape, or you can turn off the Mod with the five clicks before putting it back in your pocket. Actually the Mod lock sliding button can come in handy when you want to quickly turn off the LED lights to show them when you decide to vape. It seems to me an intelligent management to be able to turn off the lighting, you have 2 ways to do it; quickly using the lock button but to vape you will have to slide the button again and the LED will reactivate, or through the setting and you can vape without the LED. Deactivating the LED certainly saves battery energy, for a longer vaping autonomy.



► Freemax Marvos X 100W Kit; The menu offers the following options:
● These are the main operations you can perform with this device. I hope the following pointers can help you understand how this product works.
• Locking / unlocking the Up / Down adjustment buttons:
Press and hold the "+" and "-" buttons simultaneously for 1s to lock them, repeat the operation to unlock them.
• Device lock:
Slide the switch to the left to lock the device. When you press any button the "Device Lock" message will appear on the screen. Slide the switch to the right to unlock.
• Selecting the output mode:
Press Fire 3 times to enter the menu, in the "MODE" state press Fire to confirm, press the “+/-” buttons to select Watt / Smart / VPC / Bypass, press Fire to confirm your choice.
• Power regulation:
Press the "+/-" buttons to adjust the power up or down (+/- 0.5W / click).
In Smart mode when the maximum power value is reached, the message "MAX POWER" is displayed.
• VPC Setup:
Within the MODE state, press "+/-" buttons to choose VPC, press Fire to enter; hold Fire for 2s to exit, on the screen and during the vape will be shown the output of the curve in real time.
• Change theme color:
In SET state, press "+/-" keys to select "THEMECOLOR", press Fire to enter, press "+ / -" buttons to choose color, then press Fire to save and return to SET state
• LED adjustment settings:
In SET state press "+/-" keys to select "LED Control" press Fire to enter and use adjustment keys, then you can choose to turn off the Christmas tree (Led OFF) by pressing Fire to confirm. While if you want to play positioned in the Led ON state, now you can have fun and choose many parameters to set the lights to your liking: Multicolor, Unicolor (click on the color block to adjust the RGB values), Alternate, Always On, Circle, Drop , Flash, Gather, Rise, Spread, Tetris, Waterfall !!! Press Fire to confirm and press Fire for 2s to exit.
• Puffs Reset:
In SET state press the "+/-" keys to select "Puff" press Fire to enter and select RESET to reset the puff counter.
• Factory data reset: In SET state press "+/-" keys to select RESET, press Fire to enter, select Factory Reset "and press Fire to restore factory default settings.



► Freemax Marvos X 100W Kit; Side and back view:
The side view has a sober and elegant appearance consisting mainly of metal. The LED light here is of the perimeter type and divides the side panels from the rear panel. The rear panel as we have seen previously is covered with a leather decoration with 3 different graphics depending on your choice. My Marvos X is the "Navy Blue" model with "Eagle" blue leather decoration, frame and CRC tank SS.





► Freemax Marvos X 100W Kit; Battery compartment:
The rear hatch is removable and is shaped with a "C" design and is anchored to the mod by two rather sturdy magnets. The hatch has the advantage of not moving at all as it is literally wedged in the tealio and looks like a single piece with it. The hatch is quite massive, as under the layer of leather there is metal, it is also lined internally with insulating material. The 18650 battery slot has polarity indications and the top pin with negative polarity is spring loaded to allow you to place a 18650 battery quickly. The slot is made of flame-......ant and transparent plastic material. The high transparency of this material allows the LED lights to be projected very efficiently towards the screen and towards the outer perimeter of the cover.



► Freemax Marvos X 100W Kit; Bottom Base and Thread 510:
The lower base of Marvos X 100W guarantees a good stable support, shows various writings and two cross screws.

Marvos X incorporates the pod compartment directly into the mod, so you won't be able to use 510 threaded tanks, but you will still be able to insert a wide range of FreeMax cartridges all spectacular for RDL / DL vaping. The fixed part has adjustable AFC control and two huge opposing slots that will send the air towards the coils. Inside the compartment / pod you can see a metal ring screwed with two cross screws, this ring forms the magnetic base for the cartridge. On the bottom are the two pins which are spring loaded and gold plated.



► Freemax Marvos X 100W Kit; CRC Pod Tank:
The tank with circular design has excellent transparency and an e-liquid capacity of 5ml (2ml TPD). The main improvement of this cartridge over others is the practical top fill mechanism; you have to pull the top cap up, then slide it to access the fill port. This effective method incorporates "child safety" but also makes it absolutely safe to store in your pocket or purse, as it will never open unintentionally. Another improvement of this cartridge compared to others is also that of being able to have a replaceable Drip Tip 810, well made and with two excellent silicone Orings. On the bottom of the tank there are four magnets to make it very integral to the Mod, in addition there is the classic liftable rubber to insert the eliquid. The coils are inserted by pressure.



► Freemax Marvos; Coils and Vaping Test:
Marvos X uses the latest line of MS-D coils. These Coils use the FM COILTECH 5.0 technology characterized by tea fiber cotton and the military-grade SS904L double Mesh, the net is enveloping at 360 ° both internally and externally with respect to the breathable material.

• MS-D Mesh Coil 0.15Ω (60W - 80W):
This Coil is my favorite, at 60W it is already perfect when new, and without strange flavors. Quick to respond to the Fire button with flawless flavor and huge, awkward vapor production. Going up with the power, with the airflow completely open at 70 and 80W this coil becomes a devil! The flavor quality is superb and the vapor is incredibly thick and hot to the correct point. It keeps pace with compulsive vaping but is logically thirsty for e-liquid, on the other hand, high performance pays off. Another aspect to take into consideration is the high battery consumption at these high powers. The 18650 battery guarantees better autonomy by lowering the power to 60W and the coil still responds well, in this case it is better to slightly close the control of the air to taste a similar taste to that obtained by setting a higher power.

• MS-D Mesh Coil 0.25Ω (30W - 50W):
From an energy saving perspective, this Coil with its lower range of use is certainly a better option for this kit. My weak point with this Coil I found it at 45W with wide open AFC. At 45w it expresses itself almost at the levels of the previous one, with a flavor of almost the same level and a fresher but slightly less full-bodied and dense vapor. This resistance, however, has an advantage and the secret lies in the possibility of lowering the power up to 30W while maintaining a good heating speed and in combination with a restricted regulation of the air flow it becomes possible to enjoy an excellent RDL vape. Naturally at 30W the vaping autonomy increases considerably with the lower energy consumption of the battery.



Freemax is a manufacturer known for their Coils and the flavor they provide. The Marvos X kit continues to live up to this reputation. The heavenly flavor of these MS-D Double Coils is unreal for a pod tank and definitely competes with the best sub-ohm tanks I've tried. Furthermore, the wide range available of MS Mesh resistors and different cartridges can be combined with this Mod with excellent results.



► Freemax Marvos X 100W Kit; Final conclusions:
Anyone who has read this whole review will have guessed that I really liked this kit! Marvos X proved to be very satisfying and fun for me, I often carry it with me on my outings along with a spare 18650 battery. I enjoyed playing with the incredible range of lights, but I have to say that I rarely use LEDs, just to laugh sometimes with my friends. Other than that, I just wanted a bigger tank. For the rest, Marvos X completely won me over, and it was certainly the general quality of the Kit combined with the incredible performance of the MS-Double Mesh Coils that made me fall in love with Marvos X.
I can really enthusiastically recommend Marvos X 100W Kit

Thanks to Freemax for sending me these samples for review.
Marvos X 100W Kit | FREE MAX. FLAVOR MAX.

Thanks for reading.

Dear valued customers,

I am wondering if you guys noticed that Voopoo has just released 2 new kits, featuring IP68 tri-proof function.

Guess what? Healthcabin teamed up with VOOPOO is going to giveaway these brand new kits – Argus MT Kit & Argus XT Kit with 4 winners in total, ends on 30th Aug. Wanna test them for free? Take the chance to join us and win them home!

Prizes:

• VOOPOO Argus MT Kit – 2 Winners
• VOOPOO Argus XT Kit – 2 Winners

*If you are luckly to win, you will get one of the prizes randomly.

About VOOPOO Argus MT/XT Kit
Voopoo Argus MT & Argus XT come with 100W max power, 6.5ml capacity and IP68 rating tri-proof function. The ingenious Crater Leakage Proof structure drains the condensate down to the isolated room. According to Turbo Mode, it features a power boost at the beginner of puff for a massive vape hit. Powered by GENE TT 2.0 chipset, it allows for high watts consistently and 7 comprehensive protection, the QS-Lock with slider can lock all buttons. it can incorporate a powerful battery(single 18650/21700 battery for XT, built-in 3000mAh battery for MT) to match its 5-100W output. The fullness of its bright 0.96-inch TFT color display allows for VW (RBA), SMART, TC (Ni, SS, Ti), and Turbo mode.



Join & Win
Finish the tasks below and win VOOPOO Argus MT & Argus XT Kit home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

Please click here to join: HealthCabin Giveaway or VOOPOO Giveaway | HealthCabin

DTL or MTL??

Dead rabbit from hellvape has several models. In terms of appearance, the hellvape dead rabbit m rta is similar to the dead rabbit 3 rta, however, there are many small details that make the design different.


Dead Rabbit M features a large 5ml capacity and the glass tube is transparent so you can keep an eye on the vape juice and refill it in time.

The top-to-bottom laminar honeycomb airflow not only evaporates the heat generated by the unit properly but also brings in more fresh air on inhalation.

And the pillarless ceramic deck allows you to place regular single coils and prevents mesh coils. It is of course recommended that you choose mesh coils as they are more comprehensive.

You can easily refill by turning the top cap and the flexible adjustable airflow operation gives you the freedom to customise the flavour output. The hellvape dead rabbit m will bring you the ideal vaping time.

The larger 810 drip tip also allows more clouds to be inhaled at once for painful DL Vaping.

More products recommended:
https://vapesourcing.uk/smok-novo-2x-kit.html

One of the industry's top-selling juice companies has leveled up its disposable game! Check out the Juice Head 5K!

Features

• 5000 Puffs

• Pre-filled 14ml Vape Juice

• Rechargeable

• 650mAh Battery

• 5% Nicotine

• Mesh Coil

• MTL Draw

• Draw-activated

Filled with Juice Head's famous recipes, these not only feature top-tier juice BUT its rechargeable AND offers up to 5000 puffs! Grab the Juice Head 5K while you can!

Please go to vape online to buy.

You may also like:

smok mag18
10000 puff vape

VOOPOO Argus XT Kit

Argus XT Kit is composed of Argus XT Mod and Matt Tank New. Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Matt Tank New features 6.5ml capacity and easy top filling system. It adopts volcano crater structure to prevent leakage and two-way airflow for easy deep DL vaping. Compatible with VOOPOO TPP Coil, it can bring you authentic vaping experience. By adopting the Dual In One Tech 2.0 mesh coils, it also can offer fuller, more delicate and multi-layered clouds.

Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. 6.5ml e-juice capacity, easy top filling system
9. Adopts volcano crater structure to prevent leakage
10. Two-way airflow for easy deep DL vaping
11. Dual In One Tech 2.0 mesh coils with denser flavor and longer lifespan
12. Compatible with VOOPOO Maat Tank New and all TPP Coils
13. Seven safety protections to guarantee the safe use




VOOPOO Argus XT Box Mod

Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function for durable use, 3A Type-C fast charging with dust-proof cover design and humanized QS lock to avoid accidental touches. Argus XT Mod is compatible with VOOPOO Maat Tank New PP-X Pod Tank, and all TPP Coils.

Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. Fit for Maat Tank New, TPP-X Pod Tank and all TPP Coils
9. Seven safety protections to guarantee the safe use

Do you like the shape of Eleaf FlasQ?

The solid all-metal body integrated with a novel and unique flask-like outline demonstrates the individuality of Eleaf FlasQ.
Eleaf FlasQ is ergonomic and compact. Eleaf FlasQ is integrated with an internal long-lasting 1370mAh battery and a 5ml capacity pod. FlasQ while still keeping in a compact size and feeling comfortable in hand.

BTW: Just click here to win it, try it for free!

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
It’s been 4-1/2 years since I last tested this cell so I thought it was worth seeing if the performance has changed over the years. This version of the 30Q has a “6” in the lower left corner of the printing on the wrap. If there is no “6” then it is not a 30Q6.

The 30Q6’s I tested performed a little better than the 30Q’s I tested in 2018. You probably won’t notice the difference but it’s good to see.

The datasheet and presentation document mentions operation at 20A (not a rating!) and a maximum cell temperature of 75°C but I recommend not using it at over 15A. This is an “energy” cell and not a “power” cell and you start getting a lot of voltage sag when running near its 15A rating or higher. The cell already reaches over 70°C when run at 15A continuous so 20A operation would have to be non-continuous.

Two cells tested out to 3075mAh and 3089mAh, which is good consistency. As expected for cells from a major manufacturer both cells easily exceeded their 3000mAh rating. I have not tested the cycle life of these cells.

These were purchased for testing by me from 18650BatteryStore (18650 Battery Store - Lithium Ion Batteries, Chargers and Accessories).


18650 Ratings and E-Scores Table:
https://www.e-cigarette-forum.com/blog-entry/18650-battery-ratings-table.7447/


20700/21700 Ratings and E-Scores Table:
https://www.e-cigarette-forum.com/blog-entry/20700-21700-battery-ratings.7827/


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/

Try the all new Beco Pro Disposable Vape at vape shop. The Beco Pro Disposable Vape is a box style pod device that requires no maintenance due to it's simple and disposable nature. The Beco pro features no buttons and is automatically activated when you inhale. Estimated to last up to 6000 puffs the Beco Pro is pre-filled with 12ml of TFN-based e-liquid in a 50mg nicotine level and is available in variety of flavors. Each Beco Pro is designed with a 650mAh rechargeable built-in battery. Perfectly designed for the best vaping experience on the go the Beco Pro Disposable Vape is also equipped with a 1.2ohm Mesh Coil and 2 and airflow control options for the best vapor and flavor satisfaction.

Specifications:
Dimensions: 76.5mm x 45.8mm x 20.9mm
Built-in Battery Capacity: 650mAh
E-Liquid Capacity: 12ml

Beco Pro Features:
1.2ohm Mesh Coil Design
Disposable Design
(2) Airflow Control Options
No Maintenance Required
Classic Automatic Style
Vape Pen Design
Ultra Lightweight and Compact Design
Non-Refillable Design
50mg Tobacco-Free Nicotine E-Liquid
Flavors by Beco



You can get more information about nicotine free vape at: https://www.bbb.org/us/ca/tustin/profile/ecigarette-liquid/vapesourcing-1126-1000099548

Illuminate any room with the brand new Hyde Retro RAVE Edition. The Retro RAVE is a rechargeable disposable device that features an LED Light that can be turned on or off with the quick click of the button, discreetly located on the bottom of the device.


FLAVORS:

• Aloe Grape – Aloe | Grape
• Bananas & Cream – Banana | Cream
• Blue Razz Ice – Blue Raspberry | Menthol
• Brazmallows – Blue Raspberry | Marshmallow
• Cola Ice – Cola | Menthol
• Energize – Energy Drink
• Loops – Fruit Cereal | Milk
• Minty O’s – Sweet Mint | Menthol
• Morning Brew – Coffee | Cream
• Peach Mango Watermelon – Peach | Mango | Watermelon
• Philippine Mango – Yellow Mango
• Pina Colada – Pineapple | Coconut
• Power – Green Energy Drink
• Sour Apple Ice – Green Apple | Menthol
• Strawberry Banana – Strawberry | Banana
• Strawberry Kiwi – Strawberry | Kiwi
• Summer LUV – Fruit Medley
• Tropical – Tropical | Gummy
• Blue Razz Clouds (NEW)
• Dragon Fruit Lemonade (NEW)
• Mango Peaches & Cream (NEW)
• Peach Lemon (NEW)
• Rainbow (NEW)
• Strawberry Lemon Lime (NEW)
• Watermelon Ice Cream (NEW)

FEATURES:

• 5% Nicotine
• Liquid – 12mL
• Battery – 400mAh (Rechargeable)
• Rechargeable via Micro USB (Not Included)
• 5000 Puffs Per Device

Wotofo Zetta 5000 Disposables Review



Wotofo are back again with a new disposable vapes line: the Zetta 5000!

These devices were sent to me by Wotofo for review purposes (thank you, Cara!).

In the past year or so, it has seemed like that new disposable e-cigarettes or even new manufacturers of it crop up on a daily basis. There’s sooooo many of them now, and “old school” vape hardware producers have gotten in on the action too. Some have even formed subsidiaries or sister companies that appear to be dedicated to the design the product of disposable vapes.

Wotofo have released a fair few, and I have had the privilege of reviewing some of them. The Zetta 5000 though is a bit different from their other disposable vape offerings and indeed from its competition too, and we shall dive down into what the Zetta 5000 is all about in this review.

My review will be from my own experience of using these devices in everyday life as a regular vaper.

Quick specs:

- 108 x 29 mm. It’s a short and fat cylinder, basically resembling a sausage!

- 550 mAh battery

- Made from aluminium alloy and food-grade PC.

- Having a 1.2 ohms mesh coil with nexMESH Tech.

- A generous 13mL of e-liquid volume, and claims to have a 5000 puff-life (hence the “5000” in the name).

- Has a USB-C port for charging at its bottom.

- Available in 12 flavours and in various nicotine levels.

Kidding aside with the sausage likeness, its form factor is actually very comfortable in the hand. All surfaces are smooth, from the mainly plastic shell to the metal bottom. There is a unique, almost splashed, design printed all the transparent shell, and underneath this outer shell you will find the branding in the usual big Wotofo font plus the flavour name on the side.



The transparent shell also serves to enhance the LED lighting effects that feature on the Zetta 5000. These LED lights illuminate when vaping and also when charging. The LED pattern is that of flashes of changing colours all around the device, with the flashing speed not too fast or too slow. It is also not too bright to call out unwanted attention; so all in all, quite a quirky addition to an already pleasing-to-the-eye device.

The mouthpiece is of a flat shape that is very comfortable on the lips. And the charging port at the base of the device does mean that you cannot charge this upright, but it does charge quickly enough so that it won’t be on its side for too long.



With the battery size, e-liquid capacity, and having actual metal components to it, it is quite understandable that the Zetta 5000 weighs a tad heavier than your run-of-the-mill disposable vapes. But that’s not to say it’s heavy- you won’t really notice its weight when pocketed.

It’s a simple pull and puff type of device which is very responsive. It doesn’t have any airflow control or other extra features for customisation which makes for easy operation. The draw from it is a medium MTL draw in my opinion, giving a surprisingly warm-ish vape despite the high resistance coil installed.



Of the available flavours of the Zetta 5000, I have been sent these: Watermelon Ice Cream, Watermelon Cantaloupe Honeydew, Grape Ice, Mango Ice Cream, and Blueberry Raspberry Ice. They all taste quite nice, with punchy flavour and strong sweetness. One thing I did notice, particularly with the Watermelon Cantaloupe Honeydew, is that in some puffs, the vape can feel a little “dry”. Maybe that’s just me, but it’s not really a con for me as it doesn’t happen consistently enough.

Otherwise, the fruit-based flavours taste of fresh fruits, intensified by the added juiciness and sweetness. The Ice Cream flavours really do have a milky base to the taste which mixes nicely with the fruit component.

All in all, the Wotofo Zetta 5000 is a decent disposable e-cigarette which gives a very satisfying vape. It offers a good selection of flavours and is very easy to use, especially on-the-go. With its relatively high e-liquid capacity and recharging capabilities, it makes for a cost-effective solution for avid users of disposable vapes (but please always dispose of your used vapes responsibly!).

My sincerest thanks again to Wotofo for allowing me to review these products!

Kumiho V (5) // Review by HyDrOpOnIc1987

Hello and thank you for stopping by to read another review by, well uh, me of course! Today's device is the Kumiho V or 5 and was sent to my by Health Cabin for the purpose of a fair and honest review. I'm hoping to showcase just that in today's review. First I'll show some promotional images and then tell you about the features and specifications of this device. Lastly, I will unbox, assemble and use this device and tell you the highlights of my time with this device. So without further adieu, let's get to it.

Promotional Images, Features, Specifications and Contents of Box













Features:
1. Build-in 600mAh battery
2. 2ml refillable empty transparent pods: 0.6ohm & 1.0ohm
3. Patented coil cotton design for 0.6ohm pod for quick eliquid transmission
4. Innovative vibration interaction when the pod connected
5. Super easy to use with auto draw
6. Adjustable airflow for accurate RDL & MTL vaping
7. Pre-filled pods are also available, sold separately
8. USB C charging port

Specifications:
Brand: Kumiho
Unit: 1 Set
Materials: Aluminium Alloy, PCTG
Size: 119mm*22mm*11.5mm
Color: Black, Blue, Red, Gunmetal, Pink Gold
Battery capacity: 600mAh
Output wattage: 18W max
Pod capacity: 2ml
Pod resistance: Meshed 0.6ohm(14-18W), Dual Coil 1.0ohm(11-13W)
Package: Box

Contents of Box:
1pc Kumiho Model V Device
1pc Model V Empty Pod 0.6ohm (14-18W)
1pc Model V Empty Pod 1.0ohm (11-13W)
1pc User Manual

Unboxing, Assembly and Usage Highlights:





The packaging for this device is actually pretty nice. It’s a box, obviously, but has a paper sleeve over it which is red and stylized. Kumiho, the branding, is embossed in gold. There’s the picture of the device, but also the model name in a glossed font along the right side. Pretty stunning, but red is my favourite colour.

On the left side of the sleeve it says Model V in the same glossy font. The back of the sleeve has all the pertinent information: a description of the device and is use, 6 “icons” and their explanations describing the features of the device, the package contents, the contact information for the brand and last but not least is a warning to “KEEP OUT OF REACH OF CHILDREN”. Oh, and also that it’s made in China.

The box itself is pretty plain. White with the brand and model name in beige font. Tada.
Inside the box is where everything lives. There’s a sleeve that houses the manual, a spot to write down your purchasing information for warranty purposes, as well as more of the same information about the device itself. Then in the box you have the device and 2 pods, one 1.0 ohm and one 0.6 ohm.

Because it’s a pod device, I didn’t have to go wash it with soap and water and a tooth brush, I just used a sanitizer wipe and then wiped it off with a moist paper towel. Now that the mouthpiece is clean, I put my eliquid in the pod. The pods have a silicone plug that you have to pull out, and its on the side but near the bottom of the pod. In the 2 weeks I’ve had this device though, it hasn’t had a leak an the plug has held strong after multiple refills. Also, the hole is big enough that air can pass by the side of the nipple thing on my 60ml and 120ml chubby gorilla bottles, so that’s a definite plus. Zero issues when filling. I let the pod sit for about 20 minutes, just to be safe.



When i put the pod in, there was a vibration. Haptic feedback. And the pod clicks into place pretty satisfyingly. It has 2 magnets, but there are also a couple notches that link into place and clicks along with the vibration to let you know it’s seated properly.



On the side of the device is a little switch or lever and it controls the airflow. To be honest, I didn’t feel too much of a difference between it full open and full closed. It is not really a MTL device. I guess it can be, but its VERY airy. The draw was almost the same from both pods as well. The only difference I really noticed was in the way the liquid flowed through the pod. Weirdly enough, I found that my 50/50 10mg salt nicotine liquid would flood the 1.0 ohm pod very quickly, while when I used 70/30 6mg freebase liquid in the 0.6ohm pod, it couldn't keep up. I emptied and put the same flavour of salt nicotine liquid in the 0.6 ohm pod and it still had a hard time keeping up. I had to make sure to take at least 20 second breaks between toots, sometimes more. The way these pods behaved made me wonder if they were perhaps mislabeled and should have been reversed? I don't know lol. But I did get the 1.0 ohm pod to work well with freebase nicotine liquid. The flavour and vapour production was amazing and on point. I just wish they behaved properly and that the 0.6ohm coil would work right at all.
The restriction on the draw is identical between the pods. If you set the airflow and switch between the two, it will seem the same unless you have different liquids in them. The battery on the device lasts quite a while though, it took me 3 full days of use to kill it. So that is DEFINITELY a plus. The device is fairly nice looking but it also can't stand up right, the bottom, which it where the charge port is, is rounded (probably to protect the port) and wont let it stand up. It will fall to either side when you try to stand it up right.

The device is pretty awesome when the pods work as they should. I hope that they work on the 0.6 ohm pod some more and perhaps check to see if the pods were mislabled and reversed.

I would like to thank Health Cabin for sending me this device to review. It’s a very nice device if you stick to the 1.0 ohm pods. I would recommend this device to those who like a restricted DTL pod with minimal airflow control.
Here is a link to pick it up from Health Cabin.

Kumiho Model V Pod Kit

Thank you for reading this review, I hope you found it informative and somewhat pleasant to read. Hope you all have a good one, and try to stay out of trouble if you can. But a little trouble is fun! 

Cheers!