Hi
Just purchased my very first smok nord 4 kit from recommendations and the screen isnt working, Ive checked it's not in stealth mode but still black screen. Is there anything else I can try before returning to supplier? tia

Hey guys anyone knows of any supplier in Israel that sells 100 MG Nic Base ?
Ordering from USA or EU wont make it pass customs unfortunately .
Thanks best regards !!!

Just heard a knock on my door and found this on my porch. Thanks for the gift Voopoo!

I’m happy to be here today in order to present another review for Innokin. I’ve always associated Innokin with quality made products and today I’m here to talk about yet another one that was sent to me for this review. I was actually sent two of the Kroma 217 kits that come with the new Z-Force tank. Many people have been asking for Innokin to make a mod that uses 21700 batteries and that is what they have done. The Kroma 217 can also use 20700 and 18650 batteries as well with the included battery adapter. It also has features like we’ve seen in past Innokin devices like Coil+ and Refresh. The new Z-Force tank has some really good features that I’ll talk about more later and uses the new DuoPrime ZF coils. It’s been a while since I’ve seen a new coil from Innokin so was very excited to give them a good test.






WHAT’S IN THE BOX?

Innokin Kroma 217 Z Force Kit Contents:

• 1x Innokin Kroma 217 Mod (Battery not included)
• 1x Z Force Tank (ZF 0.2Ω KAL Coil installed)
• 1x Spare ZF 0.3Ω DTL Coil
• 1x Spare Clear Bubble Tube (5ml)
• 1x Spare ZF O-Rings Set
• 1x Type-C charging cable
• 1x Quick Start Guide

Innokin Kroma 217 Z Force Kit Specifications:

• Device Dimensions: 132*45*30mm
• Color: Glass Fiber, Carbon Fiber, Mariana Blue, River Wood, Stealth Black
• Tank Capacity: 5ml
• Resistance: 0.3ohm 30-45W; 0.2ohm 50-80W
• Glass replaceable: Yes
• Airflow: Adjustable
• Tank Fill: Slide Top Fill
• Internal / External Battery: External 21700/20700 Battery or 18650 Battery (with adapter)
• Minimum / Maximum Wattage: 6.0W-80W (18650 Battery with Adapter); 6.0W-100W (21700/20700 Battery)
• Minimum / Maximum Voltage: 1.0V-7.5V
• Tank Compatible: 510 Thread Tank
• Drip Tip: 810 Drip Tip
• Max. Output current: 18650 Battery: 28.5A; 21700 Battery: 32A
• Body Material: Zinc-alloy
• Charging: 5V/1.7A USB-C Charging

Innokin Kroma 217 Z Force Kit Features:

• Curved Ergonomic Design, Crafted with Premium Zinc alloy
• Powered By A Single 21700/20700/18650 Battery (Not Included)
• 6-100W Output, Ideal for DL and RDL vaping
• Adopt the Coil+ and Refresh Modes
• USB-C Fast Charging
• New Performance Platform Z Force Tank
• Designed for DL or RDL
• Leak-proof Design
• 5ml Capacity with Slide Top Filling
• ZF coils with DuoPrime wicking

INITIAL THOUGHTS:

I received the carbon fiber and river wood versions for review samples. The packaging for the Kroma 217 kits is what I have become used to seeing from them. It is simple but nice and everything is packaged in recyclable material. On the front of the brown cardboard packaging is a color picture of the device contained inside and on the back of the package is a list of the contents of the kit along with an authenticity code.




Once the packages were opened, I was truly impressed by how sharp looking the Kroma 217 mods were. I was really impressed with the carbon fiber model which has a gunmetal colored frame. I just thought to myself “wow that’s a nice looking mod”. I feel like my pictures just don’t do them justice.

On one side of the high grade zinc alloy frame is the Kroma 217 name stamped into the frame and on the opposite side is the Innokin name also stamped into the frame. The gunmetal version has a carbon fiber backing that is slightly padded while the river wood version has a leather like backing that is very slightly padded. Both mods are very sharp and very comfortable and ergonomic to hold and use.







The Kroma 217 can use a 21700, 20700, or 18650 battery with the very nice included battery adapter. The battery is loaded from the bottom of the mod through the slide and flip open battery door. The hinge on the battery door seemed very solid and was easy to open and close. There are four slots in the bottom of the battery door that I believe are for battery venting.









The front of the Kroma 217 reminds me quite a bit of the Kroma R mod as far as using a fire bar with the screen embedded in it. When you receive it there is a sticker on the front of the mode that says to click the fire bar three times to turn the mod on. Below the screen are the plus and minus buttons with the USB-C charging port near the bottom. The display shows the following information.

- Lock/unlock symbol

- Battery indicator

- Set wattage

- Length of time of current puff

- Coil resistance

- Puff counter

- Output voltage while firing the mod

- If in standard Power mode then there will also be an N (normal), S (soft), or H (high) displayed.


If you are familiar with the Sensis or the Z80 then the button operation of the Kroma 217 will seem familiar to you. The Kroma 217 doesn’t have F(0) mode like those two but it does have Coil+ and Refresh which are two of my favorite functions. Coil + is like regular wattage mode but sends a pulse of current through the coil at the end of every puff to extend the life of the coil. Refresh is a separate function that the user can activate that pulses the coil at 40% of the set wattage. It draws liquid into the coil and tries to keep residue from building up on the coil. I tend to think of it as a coil cleaner.

The button/menu operation of the Kroma 217 is as follows.

- Press the fire bar three times to turn the device on/off

- Press the fire bar and + button to clear the puff counter

- Press the fire bar and – button to lock the adjustment buttons which is just indicated but the small lock symbol in the top left hand corner. If you press either adjustment button when locked, there is no message on the screen like I am used to seeing that tells you that the device is locked.

- Press the + and – buttons to enter the menu which has the following options

1. Coil +

2. Power( Wattage or Voltage)

3. Refresh

4. Settings( Time out, Cut off, Device-ID, Reset, Exit)




The tank that comes with the Kroma 217 is the new Z-Force tank and uses a new series of coils. The new Duo-Prime ZF coils that were included are .2 ohm (50-80w) and .3 ohm (30-45w). They have a really interesting design where there are two mesh coils inside each coil. There is an inner and an outer mesh coil. Innokin did a much better job of explaining it than I probably would so here is what their explanation. “ The outer coil increases the capillary action of the cotton wicking material, pulling liquid into the coil head, pre-heating it, and directing it to the inner coil for vaporization, creating a more fully saturated and flavorful vape.”

The tanks come with a nicer drip tip which is a nice change from the usual black tip that comes with most tanks. The 510 connection on the bottom of the tank of course has a gold plated center pin. To open the tank for filling you simply push on the top cap to slide it open and expose the fill port with a gasket seal on it. I’m seeing this gasket on more and more tanks and have mixed emotions on it. I sometimes use a glass dropper bottle and it’s almost impossible to fill with a glass dropper without making a mess. On the other hand, when filling with a standard plastic bottle then there is no mess and if you tilt the tank then no liquid will spill. You’ll have to decide for yourself whether you like the gasket or not.

The Z-Force tank has a nice feature that you can hopefully see in the pictures below. The coils are simply a push in style but the tank has a spring loaded mechanism inside where the liquid is sealed off when the coil is removed and is only able to wick the coil once the coil is inserted thus making coil changes mess free. Nicely done Innokin. The airflow openings on this tank are very different from anything I’ve seen before. There are two openings that are kind of a tear drop shape which make it easy for the user to make small adjustments at a time to hopefully find their perfect airflow.











FINAL THOUGHTS:

It has been a real pleasure testing the new Innokin Kroma 217 kit with Z-Force tank. From the nice size and comfortable ergonomics of the design of the mod to the new ZF coils that are quite flavorful, I have thoroughly enjoyed using both of the samples that were sent to me. I greatly appreciate Innokin sending the two extra boxes of coils so that I can continue to enjoy these tanks.

To me the Kroma 217 mod just screams quality. I honestly didn’t know if I would like the mod due to it using a fire bar instead of a button. I have to be honest that I didn’t really care for it on the Kroma R mods that I had purchased and ended up selling them. I always felt like the fire bar on them was too hard to press. However, the bar on the 217 seems to take just the right amount of pressure. I do think that the adjustment buttons are a little small in my opinion but they have a nice clicky feel to them and do work well.

I also like that Innokin went with the hinged battery door instead of a threaded cap for loading the battery. I immediately went with a 21700 battery since to me it is one of the main selling points of the 217 but did think that the 18650 battery adapter included was rather nice compared to some I’ve seen.

I am very glad that Innokin included the Coil+ and Refresh functions. In my opinion both are very useful for extending coil life. It doesn’t bother me at all that the F(0) function was left off of this mod. It is a neat function but honestly not necessary.

I’d like to thank Innokin and Anna for sending the Kroma 217 kit with Z-Force tank for this review and a big thanks to the readers. You make this possible. Below is a link to the Innokin site if you would like to take a look.


Kroma 217 - Vape Kit | INNOKIN®

Come and meet the coils from the GTI platform, designed by VAPORESSO for the I-TANK, makes them the magic spots that turns the high power and e-juice into the dense vapor and your favourite flavor!

Hi All,
Since it's looking very questionable if Alien Visions will ever return I have been looking for a Boba's Bounty substitute as it has been my ADV for almost 10 years now. I'm down to my last 50 ml and wondering if anyone had any suggestions for a good sub.

► Wotofo Profile Squonk Mod; Review:
Sourcemore (thank's) has kindly sent me the latest product resulting from the collaboration between Wotofo and MrJustright1. Profile Squonk Mod has a rather unique feature in that it can be used either as a single 18650 battery squonk mod with a maximum output of 80W, or as a dual 18650 battery Box Mod with a maximum output of up to 200W.
• Enjoy the reading.

► Wotofo Profile Squonk Mod; Packaging:
Anteriorly they are present; the name of the device in large letters (Profile), the name of MrJustright1 who collaborated in the creation of this device and the brand (Wotofo). The transparent plexy allows you to partially see the kit inside. On the back of the box we find the writing "Profile", the warnings, the place of production, the manufacturer's email address, the trademarks and logos required by law.



On the remaining sides of the package we find; the device name (Profile), the name of MrJustright1, the packing list, the color of the sample (Black), a barcode and the scratch & check.



► Wotofo Profile Squonk Mod; Packing List:
• 1 x Profile Squonk Mod
• 1 x Squonk Bottle (Pre-installed)
• 1 x User Manual
• 1 x Type-C Charging Cable



► Wotofo Profile Squonk Mod; Features and specifications:
• Collaboration with MrJustRight1
• nexCHIP technology
• Dimensions: 93.8x44.4x30mm
• Net weight: 135 g
• Battery: Single 18650 (Not included)
• Batteries: 2x18650 (Not included)
• Output Wattage Range: Single 18650 (5-80W)
• Output Wattage Range: Dual 18650 (5-200W)
• Maximum voltage output: 4.2V
• Reaction time (Fire): 0.001s
• Frame material: Zinc alloy
• Color screen: 0.96 inch TFT
• Squonk Bottle: 7ml silicone
• Thread: 510



► Wotofo Profile Squonk Mod; Available colours:
• Black
• Gunmetal



► Wotofo Profile Squonk Mod; First impressions:
Personally, I like Wotofo's idea of producing a dual-use device. Profile Mod in the Single Battery configuration is basically a Squonk device with compact dimensions with an empty weight of 135g.
The same cannot be said of the configuration with dual 18650; the Mod keeps the same size in width, while in height there are several Chinese dual 18650 Mods on the market that are shorter. However this is to be understood, because the Bottom Feeder system requires pipes that inevitably raise the structure upwards.
Given these premises, the device seems to be built in a solid way, it uses zinc alloy for the frame, transparent plastic for the compartment / battery door. The door is well anchored to the body of the Mod by two powerful magnets, but it is slightly noisy in your hands when you press it.



When I first turned on the Mod, it was configured in Single battery mode for the Squonk, so on the display there was only one charge indicator (a battery) and the maximum selectable power was 80W. Of course, by removing the squonk bottle and inserting the second 18650 cell, the second charge indicator also lit up and the selectable power went up to 200W.



► Wotofo Profile Squonk Mod; Side Panels:
The main controls and the color display are all positioned on one side and are inside a screen (black in my case), the buttons are made of plastic, free of anomalous movements. The screen is bright enough and the information displayed is all clearly legible.

On the opposite side, the plastic cover is transparent, with the words "Profle" and "Wotofo" in large letters, at the bottom and on the side there is an opening wide enough to allow you to press the bottle to make the eliquid rise upwards and towards the RDA tank that we will choose to use.



Some might argue that a closed cover was not included in the package to install when you intend to use the Mod in the 2x18650 version, in fact even the second additional cell (such as the squonk bottle) remains partially uncovered.

Blotto Max RTA is bigger and has more airflow & increased build space. It features the original honeycomb air ring to help you adjust smoothly. There are honeycomb holes inside the posts to bring advanced air diffusion solution. Blotto Max RTA is more tolerable to the heat with the stainless steel to seal the honey-combed style posts. It is designed with top filling system to avoid leaking risks. DOVPO Blotto Max RTA has 3.8ml e-juice capacity and two bubble glass tubes of 6ml capacity are included in the package.

DOVPO × Vaping Bogan Blotto Max RTA Giveaway, 1 winner, ends on Jan. 11th, 2022

Enter here

Now Freemax Maxus Max 168W Kit is the new member of the Maxus family, and this Maxus Max Kit is without the 510 connection, which is so different from the other Maxus series vape kits. Freemax MX Mesh Coils for Maxus Max Kit is designed as one plug-type mesh coil, so you just need to plug and unplug to change the coils easily.

However, the TX Mesh Coils & X Mesh Coils & SS904L X Mesh Coils for Maxus 100W Kit, and M Pro Mesh Coils & SS904L X Mesh Coils for Maxus 200W Kit are designed as one thread-type mesh coil.



Now there are four members in the Maxus family, so which one do you like best?

A. Freemax Maxus 200W Box Mod Kit = Maxus 200W Dual External Battery Mod + M Pro 2 Sub Ohm Tank
B. Freemax Maxus 100W Box Mod Kit = Maxus 100W Single External Battery Mod + Fireluke 3 Sub Ohm Tank
C. Freemax Maxus 168W Pod Mod Kit = Maxus Max 168W Dual External Battery Mod + Maxus DTL Pod
D. Freemax Maxus 50W Box Mod Kit = Maxus 50W Internal 2000mAh Mod + Fireluke 22 Sub Ohm Tank

VALYRIAN III Tank provides two coils, 0.32ohm and 0.14ohm. It is also compatible with VALYRIAN II's 0.15ohm and 0.16ohm coils. Great for people who like a ton of airflow. The updated UWELL PRO-FOCS Flavor Testing Technology provides vapers with the ultimate vaping experience. It completely restores the e-liquid flavor. It's a flavor beast. Uwell's patented self-cleaning technology mitigates e-liquid leakage significantly. No need to clean your tank every day. Flip-open cap design makes refilling easy. To vapers, it's very convenient.




Features:
1. VALYRIAN III Tank launched two new coils, 0.32ohm and 0.14ohm. It is also compatible with VALYRIAN II 0.15ohm and 0.16ohm coils.
2. Patented PRO-FOCS flavor adjusting technology gives you a fantastic vaping experience.
3. Progressive self-cleaning technology mitigates e-liquid leakage.
4. 6ml large capacity tank meets your long-journey vaping requirement.
5. Flip-open cap and top filling design.
...

Click here for more:

Valyrian 3 Tank: Uwell Valyrian 3 Tank

Today,I'll be covering you the latest Asvape Vulcan Lite vape kit. Asvape Vulcan Lite is consists of Vulcan Lite mod and Asvape pod cartridge 3ml with the automatic identification technology.

The self-developed REEKBOX chip features a self-check system when powering on, guarding security at all times. The Asvape Vulcan Plus Pod System comes with double cartridge pods with 0.7ohm coils and 1.2ohm coils and 3ml capacity, lasting for a long time to vape,1.2ohm coils is suitable for Direct-Lung (DL)automatically matching 12W, the adjustable power range is 5-15W.0.7ohm coils is suitable for Mouth-to-Lung (MTL) automatically matching 18W, the adjustable power range is 10-18W.

You could go to Vape Shop Online Near Me, Best Online Vape Store For Sale to get the cheap vapes.

Quick Link:

Asvape Vulcan Lite Pod System Kit 700mAh 18W
Asvape Refillable Pod Cartridge for Vulcan Lite Kit

SWFT Mod Disposable Vapeare a Disposable Device by The Finest E-Liquid. Featuring a pre-filled salt nic e-liquid and comes packaged as a disposable unit. Allowing the user to enjoy a flavorful vape with zero up keep, and requiring a quick trip to the trash once the device has been used up.

SWFT MOD Disposable has a powerful rechargeable battery, so when it runs out of power you can continue to use it by recharging it again. At the same time, it also adopts a pre-filled e-liquid design, and the capacity of e-liquid is not stingy to provide a full 15ml each device that you can enjoy such a delicious fully.

If you want a Disposable Vape Device that tastes beautiful and vapes great, it will be the right choice for you,click vape stores to get.

Quick Link:https://vapesourcing.com/swft-mod-disposable.html

You may also like: vandy vape kylin m pro in Ohio

New member with some questions.

I'm a former tobacco user, smoker and smokeless tobacco user. The last thing I used was lozenges that I stopped about 2 years ago. Probably sounds insane that I'd think about going back but I have a mood disorder that is much more stable when I'm using nicotine.

If I decide to use a vaporizer, I'd want one that was discrete, not stinky and as safe as they get given the circumstances i.e., no ingredients that aren't necessary. *Forgot to add I'm quite old but in reasonably good health.

These voltages show us how the cell reacts to being used, or not used. They aren’t ratings or specs but they are important concepts for being able to best use the datasheet information.

Resting Voltage
This is the voltage of the cell or battery pack when it has had a chance to rest after being used or charged. All of the datasheet specs are based on the resting voltage.

Under-Load Voltage
This is the voltage of the cell or battery pack while it is being used, while it is “under load”. It is always lower than the resting voltage because of the voltage drop (“voltage sag”) caused by the internal resistance of the cell/pack.

This is not the true cell/pack voltage! It is just a lower temporary voltage seen only when it is being used. The voltage rises back up some once you stop. How much it rises depends on on how hard you were using the cell/pack.

Why is the difference between these two important?

The decisions we make about how hard we can use a cell need to take into account the differences between the resting and under-load voltages. It’s also important to mention which one of these is being discussed when talking to someone about cell performance or safety.

For example, the 2.5V low voltage spec for a “standard” li-ion cell is the resting voltage. If we are using a cell and the voltage sags down to 2.5V but bounces back up to 2.8V (or some other voltage) then we have not discharged that cell to 2.5V. The voltage sag that caused the temporarily lower voltage only made it seem like we discharged it that far. In this example we have only discharged it to 2.8V.

But if we used a cell and then stopped for a while (at least several minutes) and the voltage only rose back up to 2.5V then we should not discharge it any further. This cell has had time to settle to its true (resting) voltage and it’s down at the 2.5V low voltage rating for the cell. We should stop using this cell and charge it.

When someone says “never go below 3.0V per cell”, or some other level, it’s important to know if they are talking about the resting or under-load voltage.

Going to 3.0V/cell while being used is a lot less stressful to a cell than taking a cell down to the point where it only rises back up to 3.0V after a couple of hours. Using a cell until it drops to 3.0V means it might bounce back up to 3.3V or even a higher once you stop. But that cell with the 3.0V resting voltage might have been discharged to 2.8V or even a lot lower. This can create more heat and age the cell faster.

Charging Voltage Sag
This is a third example of a “phantom” voltage. While charging a cell or pack you will see the opposite of what happens during discharge. The internal resistance of the cell cause a voltage rise instead of the voltage drop (sag) seen during discharge.

This is what causes the cell voltage to almost always read lower than 4.20V after charging to that voltage. The resting voltage might be pretty high, 4.19V, or it could be a lot lower, 4.15V, if the cell was older and had a lot of internal resistance or if you were charging very quickly.

This usually has very little effect on how completely the cell was charged since most chargers keep going until the current has dropped to a certain level, they are not fooled by this phantom voltage rise.

But if your cells are dropping down to around a 4.15V resting voltage, or lower, then I recommend charging slower to minimize the voltage rise in the cell. Some chargers are more sensitive to this voltage rise that than others and all chargers are affected by it a bit at high charging current levels.

Examples of Resting and Under-Load Voltages
Examples of a cell at its resting voltage are easy to find, just don’t use the cell for a couple of hours. You can get a good idea of its resting voltage after a few minutes, perhaps just a couple of minutes, but it takes up to a few hours to come to its final resting voltage.

The under-load voltage can be seen any time a cell is being used. The harder you use the cell the bigger the difference between the resting and under-load voltages.

If you are a vaper you might have noticed this happening while taking a puff with a regulated device (with a display). The cell voltage/percentage or the number of “battery bars” will drop when you take a puff but then go back up when you stop. The higher the power setting, the larger the voltage drop will be.

If you have ever checked the voltage of your battery pack when riding an electric skateboard or e-bike you might have noticed the voltage dropping whenever you accelerate and then going back up when you are just cruising. This is the voltage sag difference between low power cruising and the high power being drawn from the battery pack when accelerating.

The under-load voltage effect isn’t only visible when comparing it to the resting voltage. The under-load voltage difference can also be seen when using a cell/pack at two different power levels (like when cruising or accelerating with an e-bike).

Using Resting and Under-Load Voltages Properly
If we wanted to always stay above 3.0V/cell (or some other voltage) to extend cell life then we should be paying attention to the resting voltage we bring the cells down to, not the under-load voltage.

This means we can discharge our cells to under 3.0V (or whatever you chose) as long as the voltage rises back up to at least 3.0V in a couple of minutes.

If you stopped when the cells reached 3.0V/cell under load that means you might have only discharged them down to a 3.2V-3.5V (or even higher) resting voltage. This is certainly better for the cell, helping to extend its life even more, but you are missing out on the additional run time you could get by using the cells down to a 3.0V resting voltage.

How much a cell’s/pack’s voltage rises back up when you stop using it depends on how hard you are using the cell/pack. A powerbank user might have to stop at 2.90V to be sure the voltage rises back up to 3.0V. But a high power vaper or PEV rider might be able to run the cells down to 2.5V each and still have them rise back up to over a 3.0V resting voltage. You’ll have to experiment to see how your setup responds.

High power battery pack users should be very careful though if bringing the voltages down low to maximize running time (while still having a decently high resting voltage).

If the cells in the pack are unbalanced or aging, and you do not have a BMS monitoring each cell for low voltage, then you could force one or more cells down to a very low voltage. This can possibly harm the cell.

I recommend monitoring the voltage of each cell, instead of just the pack voltage, to make sure you are not overdischarging any of them. I think 2.5V under load is a good minimum to stay above to give you a bit of a safety margin.

That should give you a little idea of how a cell responds when used and at rest. Knowing how the resting and under-load voltages are different, and how to best use them, is important for getting the most out of your cells. This is true if you are staying well within the cell’s ratings or going far beyond them.

I picked a litto wax pen at the licensed dispo the other day because they didn’t have what I usually get at my normal shop.. This pen is strong! Have you tried these yet?

Hi! Jason here, pretty new to vaping but I'm stoked to try different devices. From long beach here.

Tonight i felt worth while to get kangertech kbox 200 with subtank plus

Fitted rba with mtl clapton too.... She still works [emoji1787][emoji106]

Sent from my MAR-LX1B using Tapatalk

Sourcemore sent me the Vaping Bogan X Dovpo Blotto Single Coil RTA for the purpose of this review.





I really liked the specs on this and was looking forward to taking it for a spin.



In the box you get:

• 1 Blotto Single Coil RTA
  
  
• 1 Glass Bubble tube
  
  
• 1 PCTG Bubble tube
  
  
• 1 Accessory Bag
  
  
• 1 User Manual
  
  
• 1 Bottle Opener
  

You can use the top hole of the skull bottle opener as a coil leg cutting guide.

What I like: It’s 23.5mm wide with the straight glass. I don’t mind the 2.8ml capacity if I need a slightly smaller RTA. It’s 5ml with the bubble glass, but using the bubble glass to have more capacity is going to be a turn-off for some.



It’s nice looking and well made. The finish and threads are great.



The deck. It’s like a half-pipe, and the coil is totally wrapped in air flow.



I like those big flat screw heads. Easy for my old eyes to see.


What I don’t like: Despite the extreme texture, I cannot get the air to adjust unless I take it off the mod. Also, I find it just a bit too restricted.



It’s fussy. Normally I can get any RTA to vape at least alright on the first or second try, sometimes I can coil and wick them exactly how I like the first time. I just can’t seem to get a decent vape out of this thing. And it’s all about the wick. The wick holes are too small and too far from the deck. It’s been far too frustrating trying to get just the right amount of cotton through the holes and just touching the deck.



Would I wish it into a cornfield? No. It’s not terrible, I’d give it about a 7 out of 10. I’ll keep goofing with it, as I’m thinking it might perform better with a smaller coil wire, more on the MTL side. And I look forward to trying out other versions of this RTA.



Thanks, Sourcemore, for the opportunity to review the Blotto Single Coil RTA.

Hello guys, I have a problem, my RTAs are not as flavorful as my sub ohms.
My RTAs : Kylin mini v2, Kylin mesh, Hellvape Destiny, Wasp Nano, OFRF Gear,..... .
My Subs : PNP pod, Falcon King, Fireluke 2.
I have tried different coils, specially the fused Clapton ones, also I have been using good cottons like Cotton bacon prime or Vapefly Firebolt and also Cotton Threads, the juices are the same as I use for sub ohm tanks, when I use that juice in subs, the flavor is great, but building an RTA , the same juice wouldn't be as flavorful as the sub.
Now, the question is, do subs produce better flavors or the problem is my build, though I have no spit back or dry hit with my builds.
I would be grateful for your time and responses. Thanks.

I picked this up recently because I have no impulse control. I was looking for another pocket squonk and this found me instead. So, I'm looking to trade for a small 18650 pocket squonk - I simply have too many desk squonks.

This mod is in excellent used condition. Contacts show barely any signs of use. Includes Purge hard case, COA, matching stab wood drip tip (unused) and 25mm beauty ring, lightly used Purge squonk bottle, unused refill bottle, 18650 adapter and the bits to convert the 510 to a spring loaded configuration. 510 is currently set up with a manual adjusting pin, as is proper.

I hate to get rid of it because it is very pretty, 100% complete, and in fantastic condition. But, alas, I need more on-the-go squonks. Show me what you have.

RRP of the Purge was $325. I'm not necessarily expecting a straight RRP trade but cash can go either way to consummate a deal, if necessary.

If I don't get any viable trade offers I will post up a cash price.

Authentic The Timesvape Honor RDA vape atomizer features smooth honeycomb bottom airflow with the precise drilled, machined sleeve with compact and unique square room, the 45 degree angle down airflow hitting. Honor RDA are three style of sleeves for direct vape or adjust airflow vape, the blasted silver style with total six 1.0mm AFC holes (three each side), the matte black with total eight 1.0mm AFC holes (four each side), the PEI style with total sixteen 1.0mm AFC holes (eight each side), if you want to adjust the airflow, you can put on the PEI beauty ring, Moreover you can DIY between differ top-caps and sleeves, total nine options. What's more, Timesvape Honor RDA has such a compact square build deck with so massive posts and M3 holes.

More info The Honor RDA By Timesvape
510 threading connection
Diameter: 24mm (26mm with ring)
Material: Stainless steel + PEI
Squonkable SQUARE build deck
Three kinds sleeves for multi flavor and DIY options
Honeycomb Bottom airflow
MTL and DTL vape
Optional PEI airflow control beauty ring

QUICK LINK ,Click here>>www.3fvape.com/54859-.html

Vapeasy BY-ka SE MTL RTA clone Rebuildable Tank Vape Atomizer
The Vapeasy BY-ka SE MTL RTA clone Rebuildable Tank Vape Atomizer is made from 316 Stainless steel in 22mm and PC tank tube holds 5.0ml capacity.
The BY-ka SE Style MTL RTA supports juice control by the rotation of the chamber. The bottom airflow control is only set by the Air Pins. The MTL RTA is with convenient top refilling system.
More info BY-ka SE MTL RTA clone by Vapeasy
510 threading connection
316 stainless steel + PC
Capacity: 5.0ml
Single coil deck
Bottom airflow control
Diameter: 22mm

QUICK LINK ,Click here BUY>>Buy Vapeasy BY-ka SE Style MTL RTA Rebuildable Tank Atomizer Silver