Blotto Max RTA is bigger and has more airflow & increased build space. It features the original honeycomb air ring to help you adjust smoothly. There are honeycomb holes inside the posts to bring advanced air diffusion solution. Blotto Max RTA is more tolerable to the heat with the stainless steel to seal the honey-combed style posts. It is designed with top filling system to avoid leaking risks. DOVPO Blotto Max RTA has 3.8ml e-juice capacity and two bubble glass tubes of 6ml capacity are included in the package.

DOVPO × Vaping Bogan Blotto Max RTA Giveaway, 1 winner, ends on Jan. 11th, 2022

Enter here

Now Freemax Maxus Max 168W Kit is the new member of the Maxus family, and this Maxus Max Kit is without the 510 connection, which is so different from the other Maxus series vape kits. Freemax MX Mesh Coils for Maxus Max Kit is designed as one plug-type mesh coil, so you just need to plug and unplug to change the coils easily.

However, the TX Mesh Coils & X Mesh Coils & SS904L X Mesh Coils for Maxus 100W Kit, and M Pro Mesh Coils & SS904L X Mesh Coils for Maxus 200W Kit are designed as one thread-type mesh coil.



Now there are four members in the Maxus family, so which one do you like best?

A. Freemax Maxus 200W Box Mod Kit = Maxus 200W Dual External Battery Mod + M Pro 2 Sub Ohm Tank
B. Freemax Maxus 100W Box Mod Kit = Maxus 100W Single External Battery Mod + Fireluke 3 Sub Ohm Tank
C. Freemax Maxus 168W Pod Mod Kit = Maxus Max 168W Dual External Battery Mod + Maxus DTL Pod
D. Freemax Maxus 50W Box Mod Kit = Maxus 50W Internal 2000mAh Mod + Fireluke 22 Sub Ohm Tank

VALYRIAN III Tank provides two coils, 0.32ohm and 0.14ohm. It is also compatible with VALYRIAN II's 0.15ohm and 0.16ohm coils. Great for people who like a ton of airflow. The updated UWELL PRO-FOCS Flavor Testing Technology provides vapers with the ultimate vaping experience. It completely restores the e-liquid flavor. It's a flavor beast. Uwell's patented self-cleaning technology mitigates e-liquid leakage significantly. No need to clean your tank every day. Flip-open cap design makes refilling easy. To vapers, it's very convenient.




Features:
1. VALYRIAN III Tank launched two new coils, 0.32ohm and 0.14ohm. It is also compatible with VALYRIAN II 0.15ohm and 0.16ohm coils.
2. Patented PRO-FOCS flavor adjusting technology gives you a fantastic vaping experience.
3. Progressive self-cleaning technology mitigates e-liquid leakage.
4. 6ml large capacity tank meets your long-journey vaping requirement.
5. Flip-open cap and top filling design.
...

Click here for more:

Valyrian 3 Tank: Uwell Valyrian 3 Tank

Today,I'll be covering you the latest Asvape Vulcan Lite vape kit. Asvape Vulcan Lite is consists of Vulcan Lite mod and Asvape pod cartridge 3ml with the automatic identification technology.

The self-developed REEKBOX chip features a self-check system when powering on, guarding security at all times. The Asvape Vulcan Plus Pod System comes with double cartridge pods with 0.7ohm coils and 1.2ohm coils and 3ml capacity, lasting for a long time to vape,1.2ohm coils is suitable for Direct-Lung (DL)automatically matching 12W, the adjustable power range is 5-15W.0.7ohm coils is suitable for Mouth-to-Lung (MTL) automatically matching 18W, the adjustable power range is 10-18W.

You could go to Vape Shop Online Near Me, Best Online Vape Store For Sale to get the cheap vapes.

Quick Link:

Asvape Vulcan Lite Pod System Kit 700mAh 18W
Asvape Refillable Pod Cartridge for Vulcan Lite Kit

SWFT Mod Disposable Vapeare a Disposable Device by The Finest E-Liquid. Featuring a pre-filled salt nic e-liquid and comes packaged as a disposable unit. Allowing the user to enjoy a flavorful vape with zero up keep, and requiring a quick trip to the trash once the device has been used up.

SWFT MOD Disposable has a powerful rechargeable battery, so when it runs out of power you can continue to use it by recharging it again. At the same time, it also adopts a pre-filled e-liquid design, and the capacity of e-liquid is not stingy to provide a full 15ml each device that you can enjoy such a delicious fully.

If you want a Disposable Vape Device that tastes beautiful and vapes great, it will be the right choice for you,click vape stores to get.

Quick Link:https://vapesourcing.com/swft-mod-disposable.html

You may also like: vandy vape kylin m pro in Ohio

New member with some questions.

I'm a former tobacco user, smoker and smokeless tobacco user. The last thing I used was lozenges that I stopped about 2 years ago. Probably sounds insane that I'd think about going back but I have a mood disorder that is much more stable when I'm using nicotine.

If I decide to use a vaporizer, I'd want one that was discrete, not stinky and as safe as they get given the circumstances i.e., no ingredients that aren't necessary. *Forgot to add I'm quite old but in reasonably good health.

These voltages show us how the cell reacts to being used, or not used. They aren’t ratings or specs but they are important concepts for being able to best use the datasheet information.

Resting Voltage
This is the voltage of the cell or battery pack when it has had a chance to rest after being used or charged. All of the datasheet specs are based on the resting voltage.

Under-Load Voltage
This is the voltage of the cell or battery pack while it is being used, while it is “under load”. It is always lower than the resting voltage because of the voltage drop (“voltage sag”) caused by the internal resistance of the cell/pack.

This is not the true cell/pack voltage! It is just a lower temporary voltage seen only when it is being used. The voltage rises back up some once you stop. How much it rises depends on on how hard you were using the cell/pack.

Why is the difference between these two important?

The decisions we make about how hard we can use a cell need to take into account the differences between the resting and under-load voltages. It’s also important to mention which one of these is being discussed when talking to someone about cell performance or safety.

For example, the 2.5V low voltage spec for a “standard” li-ion cell is the resting voltage. If we are using a cell and the voltage sags down to 2.5V but bounces back up to 2.8V (or some other voltage) then we have not discharged that cell to 2.5V. The voltage sag that caused the temporarily lower voltage only made it seem like we discharged it that far. In this example we have only discharged it to 2.8V.

But if we used a cell and then stopped for a while (at least several minutes) and the voltage only rose back up to 2.5V then we should not discharge it any further. This cell has had time to settle to its true (resting) voltage and it’s down at the 2.5V low voltage rating for the cell. We should stop using this cell and charge it.

When someone says “never go below 3.0V per cell”, or some other level, it’s important to know if they are talking about the resting or under-load voltage.

Going to 3.0V/cell while being used is a lot less stressful to a cell than taking a cell down to the point where it only rises back up to 3.0V after a couple of hours. Using a cell until it drops to 3.0V means it might bounce back up to 3.3V or even a higher once you stop. But that cell with the 3.0V resting voltage might have been discharged to 2.8V or even a lot lower. This can create more heat and age the cell faster.

Charging Voltage Sag
This is a third example of a “phantom” voltage. While charging a cell or pack you will see the opposite of what happens during discharge. The internal resistance of the cell cause a voltage rise instead of the voltage drop (sag) seen during discharge.

This is what causes the cell voltage to almost always read lower than 4.20V after charging to that voltage. The resting voltage might be pretty high, 4.19V, or it could be a lot lower, 4.15V, if the cell was older and had a lot of internal resistance or if you were charging very quickly.

This usually has very little effect on how completely the cell was charged since most chargers keep going until the current has dropped to a certain level, they are not fooled by this phantom voltage rise.

But if your cells are dropping down to around a 4.15V resting voltage, or lower, then I recommend charging slower to minimize the voltage rise in the cell. Some chargers are more sensitive to this voltage rise that than others and all chargers are affected by it a bit at high charging current levels.

Examples of Resting and Under-Load Voltages
Examples of a cell at its resting voltage are easy to find, just don’t use the cell for a couple of hours. You can get a good idea of its resting voltage after a few minutes, perhaps just a couple of minutes, but it takes up to a few hours to come to its final resting voltage.

The under-load voltage can be seen any time a cell is being used. The harder you use the cell the bigger the difference between the resting and under-load voltages.

If you are a vaper you might have noticed this happening while taking a puff with a regulated device (with a display). The cell voltage/percentage or the number of “battery bars” will drop when you take a puff but then go back up when you stop. The higher the power setting, the larger the voltage drop will be.

If you have ever checked the voltage of your battery pack when riding an electric skateboard or e-bike you might have noticed the voltage dropping whenever you accelerate and then going back up when you are just cruising. This is the voltage sag difference between low power cruising and the high power being drawn from the battery pack when accelerating.

The under-load voltage effect isn’t only visible when comparing it to the resting voltage. The under-load voltage difference can also be seen when using a cell/pack at two different power levels (like when cruising or accelerating with an e-bike).

Using Resting and Under-Load Voltages Properly
If we wanted to always stay above 3.0V/cell (or some other voltage) to extend cell life then we should be paying attention to the resting voltage we bring the cells down to, not the under-load voltage.

This means we can discharge our cells to under 3.0V (or whatever you chose) as long as the voltage rises back up to at least 3.0V in a couple of minutes.

If you stopped when the cells reached 3.0V/cell under load that means you might have only discharged them down to a 3.2V-3.5V (or even higher) resting voltage. This is certainly better for the cell, helping to extend its life even more, but you are missing out on the additional run time you could get by using the cells down to a 3.0V resting voltage.

How much a cell’s/pack’s voltage rises back up when you stop using it depends on how hard you are using the cell/pack. A powerbank user might have to stop at 2.90V to be sure the voltage rises back up to 3.0V. But a high power vaper or PEV rider might be able to run the cells down to 2.5V each and still have them rise back up to over a 3.0V resting voltage. You’ll have to experiment to see how your setup responds.

High power battery pack users should be very careful though if bringing the voltages down low to maximize running time (while still having a decently high resting voltage).

If the cells in the pack are unbalanced or aging, and you do not have a BMS monitoring each cell for low voltage, then you could force one or more cells down to a very low voltage. This can possibly harm the cell.

I recommend monitoring the voltage of each cell, instead of just the pack voltage, to make sure you are not overdischarging any of them. I think 2.5V under load is a good minimum to stay above to give you a bit of a safety margin.

That should give you a little idea of how a cell responds when used and at rest. Knowing how the resting and under-load voltages are different, and how to best use them, is important for getting the most out of your cells. This is true if you are staying well within the cell’s ratings or going far beyond them.

I picked a litto wax pen at the licensed dispo the other day because they didn’t have what I usually get at my normal shop.. This pen is strong! Have you tried these yet?

Hi! Jason here, pretty new to vaping but I'm stoked to try different devices. From long beach here.

Tonight i felt worth while to get kangertech kbox 200 with subtank plus

Fitted rba with mtl clapton too.... She still works [emoji1787][emoji106]

Sent from my MAR-LX1B using Tapatalk

Sourcemore sent me the Vaping Bogan X Dovpo Blotto Single Coil RTA for the purpose of this review.





I really liked the specs on this and was looking forward to taking it for a spin.



In the box you get:

• 1 Blotto Single Coil RTA
  
  
• 1 Glass Bubble tube
  
  
• 1 PCTG Bubble tube
  
  
• 1 Accessory Bag
  
  
• 1 User Manual
  
  
• 1 Bottle Opener
  

You can use the top hole of the skull bottle opener as a coil leg cutting guide.

What I like: It’s 23.5mm wide with the straight glass. I don’t mind the 2.8ml capacity if I need a slightly smaller RTA. It’s 5ml with the bubble glass, but using the bubble glass to have more capacity is going to be a turn-off for some.



It’s nice looking and well made. The finish and threads are great.



The deck. It’s like a half-pipe, and the coil is totally wrapped in air flow.



I like those big flat screw heads. Easy for my old eyes to see.


What I don’t like: Despite the extreme texture, I cannot get the air to adjust unless I take it off the mod. Also, I find it just a bit too restricted.



It’s fussy. Normally I can get any RTA to vape at least alright on the first or second try, sometimes I can coil and wick them exactly how I like the first time. I just can’t seem to get a decent vape out of this thing. And it’s all about the wick. The wick holes are too small and too far from the deck. It’s been far too frustrating trying to get just the right amount of cotton through the holes and just touching the deck.



Would I wish it into a cornfield? No. It’s not terrible, I’d give it about a 7 out of 10. I’ll keep goofing with it, as I’m thinking it might perform better with a smaller coil wire, more on the MTL side. And I look forward to trying out other versions of this RTA.



Thanks, Sourcemore, for the opportunity to review the Blotto Single Coil RTA.

Hello guys, I have a problem, my RTAs are not as flavorful as my sub ohms.
My RTAs : Kylin mini v2, Kylin mesh, Hellvape Destiny, Wasp Nano, OFRF Gear,..... .
My Subs : PNP pod, Falcon King, Fireluke 2.
I have tried different coils, specially the fused Clapton ones, also I have been using good cottons like Cotton bacon prime or Vapefly Firebolt and also Cotton Threads, the juices are the same as I use for sub ohm tanks, when I use that juice in subs, the flavor is great, but building an RTA , the same juice wouldn't be as flavorful as the sub.
Now, the question is, do subs produce better flavors or the problem is my build, though I have no spit back or dry hit with my builds.
I would be grateful for your time and responses. Thanks.

I picked this up recently because I have no impulse control. I was looking for another pocket squonk and this found me instead. So, I'm looking to trade for a small 18650 pocket squonk - I simply have too many desk squonks.

This mod is in excellent used condition. Contacts show barely any signs of use. Includes Purge hard case, COA, matching stab wood drip tip (unused) and 25mm beauty ring, lightly used Purge squonk bottle, unused refill bottle, 18650 adapter and the bits to convert the 510 to a spring loaded configuration. 510 is currently set up with a manual adjusting pin, as is proper.

I hate to get rid of it because it is very pretty, 100% complete, and in fantastic condition. But, alas, I need more on-the-go squonks. Show me what you have.

RRP of the Purge was $325. I'm not necessarily expecting a straight RRP trade but cash can go either way to consummate a deal, if necessary.

If I don't get any viable trade offers I will post up a cash price.

Authentic The Timesvape Honor RDA vape atomizer features smooth honeycomb bottom airflow with the precise drilled, machined sleeve with compact and unique square room, the 45 degree angle down airflow hitting. Honor RDA are three style of sleeves for direct vape or adjust airflow vape, the blasted silver style with total six 1.0mm AFC holes (three each side), the matte black with total eight 1.0mm AFC holes (four each side), the PEI style with total sixteen 1.0mm AFC holes (eight each side), if you want to adjust the airflow, you can put on the PEI beauty ring, Moreover you can DIY between differ top-caps and sleeves, total nine options. What's more, Timesvape Honor RDA has such a compact square build deck with so massive posts and M3 holes.

More info The Honor RDA By Timesvape
510 threading connection
Diameter: 24mm (26mm with ring)
Material: Stainless steel + PEI
Squonkable SQUARE build deck
Three kinds sleeves for multi flavor and DIY options
Honeycomb Bottom airflow
MTL and DTL vape
Optional PEI airflow control beauty ring

QUICK LINK ,Click here>>www.3fvape.com/54859-.html

Vapeasy BY-ka SE MTL RTA clone Rebuildable Tank Vape Atomizer
The Vapeasy BY-ka SE MTL RTA clone Rebuildable Tank Vape Atomizer is made from 316 Stainless steel in 22mm and PC tank tube holds 5.0ml capacity.
The BY-ka SE Style MTL RTA supports juice control by the rotation of the chamber. The bottom airflow control is only set by the Air Pins. The MTL RTA is with convenient top refilling system.
More info BY-ka SE MTL RTA clone by Vapeasy
510 threading connection
316 stainless steel + PC
Capacity: 5.0ml
Single coil deck
Bottom airflow control
Diameter: 22mm

QUICK LINK ,Click here BUY>>Buy Vapeasy BY-ka SE Style MTL RTA Rebuildable Tank Atomizer Silver

It's convenient, user-friendly and powerful, and what else do you think that VAPORESSO XROS mini can bring to you?

► Pioneer4you IPV-V200 Mod with simplified YiHi SX531 chipset was sent to me free of charge from the Sourcemore online shop which I thank.



► Main features declared by the manufacturer:
• 1. Durable shell, constructed of zinc alloy, anodized aluminum and ABS
• 2. YiHi SX531 waterproof chip with multiple functions
• 3. Powered by 2 18650 batteries, 5-200W adjustable wattage
• 4. Customizable curves on the device
• 5. 0.96 inch TFT screen, 5-digit puff counter
• 6. Interchangeable magnetic side battery doors
• 7. 30mm 510 connector, 5V / 2A Type-C fast charging
• 8. Multiple protections; Low battery / Battery overload / On time limit / Overheating / Low resistance / Short circuit / polarity reversal.



► Pioneer4you IPV-V200 Mod; Packaging:
Pioneer4you IPV-V200 Mod is contained inside a pretty box-shaped box in white color, on the front of the box they are shown; the IPV registered trademark and generic product warnings.



On the back of the package the name of the product and the type of chipset used are reported in full, they are also present; the packing list, the color indication of this sample (Black), manufacturer's address, place of production, general usage warnings, logos and legal trademarks.



► Pioneer4you IPV-V200 Mod; Packing List:
• 1 * IPV V200 Mod
• 1 * Type-C cable
• 1 * User Manual



► Pioneer4you IPV-V200 Mod; Technical data:
• Mod dimensions: 90.6x48mm
• Mod weight: 135g
• Material: Zinc alloy, anodized aluminum and ABS
• Connector: 510
• Battery: Two 18650 batteries (not included)
• Power: 5-200W
• Resistance: 0.1-1Ω
• Voltage: 6.4-8.4V
• Quiescent current: <100uA
• Custom SXi-EQ curves: Soft, Normal, Strong, EQ1-EQ3
• Charging: type C, 5V / 2A



► Pioneer4you IPV-V200 Mod; Available colours:
• Al Black
• Al Gunmetal
• Black
• Woven Blue



► Pioneer4you IPV-V200 Mod; First impressions:
Pioneer4You iPV V200 Mod is built in sturdy zinc alloy with anodized aluminum and ABS finishes. The Mod uses two 18650 batteries for a maximum output of 200W. The Mod is served by the chipest YIHI SX531 which has been made waterproof by a specific insulating treatment.

My first thought was; "Wow" on this Mod I can install large atomizers without protrusions. Despite its overall dimensions not exactly contained, the Mod offers good portability thanks to the oval and ergonomic shape, the empty weight is only 135g.
If you still don't understand ... I really enjoyed receiving this sample, again thanks Sourcemore.



► Pioneer4you IPV-V200 Mod; How it is made:
The central body of the "I" -shaped Mod is made of sturdy zinc alloy, lateral weight has been saved with the doors / batteries that are made of plastic material, covered with elegant imitation leather decoration.



Pioneer4you IPV-V200 Mod has a slightly recessed central part on the front that houses; the 3 round-shaped adjustment buttons (fire, + and -), a small but very bright 0.96 "color TFT screen and the USB-C type balanced charging socket.
On the back appears the same design with the recessed central part containing the large IPV lettering.

Maxus Max 168W Kit by Freemax not only has an IML Screen with a large 1.3-inch interface but also has 4 colors available for you to change the UI color. So you can choose your favorite color.

Do you know how to change the UI color? You just need to press the "Power Button" and "- Button" at the same time for 1 second, then you can switch the theme color of the main screen.

Dear Vape Friends,

Merry Christmas in advance!

We are really happy that Christmas is just around the corner. How time flies.

Heathcabin is going to celebrate this incoming Christmas by giving something different, we will giveaway Kumiho brand new Model V Pod Kit, which can bring a diverse vaping experience with 20 winners in total, ends on 31st Dec. Come join us and win it home for free!

*Colors will be shipped out randomly if you are luckly to win.

About Kumiho Model V Pod Kit
Kumiho Model V, a polish finished metallic pod system, brings a diverse vaping experience with multiple stunning colors, provides a strong flavor with adjustable airflow. With its innovative vibration interaction, you will know it is ready to vape when the pod connected.



Join & Win
Finish the tasks below and win Kumiho brand new Model V Pod Kit home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

Please click here to join: HealthCabin Giveaway or Kumiho Model V Giveaway | HealthCabin

as the title of the post says, does anyone know of clones or alternatives to those two eliquids? they're my all day vapes and i've been hooked on them for years ever since they came out.

I've tried the clone recipes of the space jam andromeda and they always taste disgusting, either i'm doing something wrong or the recipes posted aren't correct and I haven't found a recipe for the vapejoose The triad bribery.

i've tried contacting vapejoose directly and they've stopped selling their eliquids and probably aren't releasing the recipe for the triad bribery eliquid, as they're ignoring my emails begging them to release the recipe even without the nicotine thats if they've shut down like they claimed in their newsletter email I recieved.

Let's welcome the upgraded version of Smoant Charon Baby - Charon Baby Plus. The Charon Baby is selling very well. Whether the Charon Baby Plus will also sell well, let's see what's new for it?



Main Features:
1. 3.5ml side-filling cartridge, with adjustable airflow valve
2. Compatible with Santi's Coil: S-1/S-2/S-3
3. 1000mAh built-in battery, output power 1-35W
4. Portable size, with lanyard hole for easy carrying
5. Replaceable magnetic 3D panel, new UV 3D Print & 2-Layers protective UV Films technology

Charon Baby Plus vs Charon Baby

Learn More:
Smoant Charon Baby Plus
Smoant Charon Baby

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall Now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more pod vapes.

And for any inquires of vape wholesale in China, feel free to contact ElegoMall.

Ok today I'm going to do a mod kit which I was sent for the purposes of a review.
we have the 'manvap' Gent 80w mod kit,
*my views are mine alone*
inside the kit itself we had the built-in 2200 mah mod itself
1 tank which comes pre-installed with a 0.3 ohm coil (rating 30w-80w)
two additional coils
1 spare glass tube
user manual
warranty card (which also has a benefit for registering with a 1-year warranty and a box of 5 coils as a reward which is a pretty nice touch.. Least thats what the Warrenty card suggest)
6 x 10 ml 70/30 VG PG e-liquids no nicotine

PACKAGING :
it is a very well presented box it has all your warning labels for example, obviously your made in China, your packaging recycling labels, your CE markings all things like that obviously all the contact information you may require from each representative; European authorised representative; United Kingdom authorised representative, manufacturer information and all this kind of thing, as well as all your social media QR codes.
Inside the box everything is laid out really nicely you have all 6 bottles of liquid as well as the MOD and the tank all fitted in him nice foam cut out
packaging,
the packaging on the actual e-liquid the first thing that comes on is a film wilh tear tape stripped attached to all the bottles, on the bottles is also a production date as well as an expiry you have your clear manufacturing label run the front of it as well as your flavour, however any relevant information on the bottle is in German language .

The tank
The one of the first things I did when I opened up and the tank was I had a little look obviously the coil and the base section of the tank. One of the first things that I come to think about it was as soon as I saw that coil was the Aspire nautilus, at the top of my head I know the Nautilus range doesn't have such a high wattage coil so I decided to ask a friend of mine see what he thought, he seemed to think it was rather similar to the Aspire Atlantis which makes sense because bvc style aswel as wider chamber. And as well as the fact it looks like the Aspire Atlantis tank itself with couple differences. One of these differences being Top Cap with built in 510 drip tip, instead of old style bottomfill tanks this is has its own independent fill port at the top of the tank under the drip tip section which you cannot put your own on. The airflow is really nice to use it's really it's not too loose but it's not overly tight, and it moves freely you don't need to get a big grab on it to force it round.

Ok the Mod...
the mod is different is Tiny it's really compact it kinda reminds me of an old kangertech K Box 40 but obviously this has a 2200 mah built-in battery wire the Old kangers were built in 18650, there may have even been a built in lipo version in subox range, even the chip inside has that classic kangertech texting on it nothing too extravagant no voltage settings just your basic wattage adjustment , ohms reader and your voltage when you're firing as well as a screen flip which makes absolutely no sense when you considered the only way the text is horizontal is when you've got them on its side.
One of the things I find strange with this it's got a perfect cut out for a tank to be sat on it however the tank has provided is so much bigger than the actual cut out it's almost like this mod originally was built for mouth to lung tank because I can imagine an eleaf GS tank sat up of this can't say this Certain because I haven't used GS tank in quite a long while but it looks like it'll be a pretty good fit.

Power.
One of the things have noticed about this mods it doesn't perform the same as a 60 w on this other device I've used various devices at 60 was using the same tank and the same coil being tested on a geekvape AEGiS X, geekvape obelisk 200w, eleaf ikuu i200 & even a Kangertech kBox 200... The Gent seems lot more gentle then the rest.

Battery.
I don't find this battery holding out very long especially at the higher wattage is it desires, especially when you have that power drop aswel

Coil Compatibility.
Even though this looks like an Aspire Atlantis coil I'm not 100% sure I would be using the aspire atlantis coils straight away. However i would probably double check with Manvap to see if the Atlantis coils can truly be used with this tank if you are looking to it and use different variations because perhaps the 0.3 is to of a low coil for you. Or at least find another alternative to run at lower wattage

The juice.
I think having 60ml of juice to try is really good touch it's really thoughtful, it's a really good little marketing technique I mean technically you've got everything you need all the one box.
To be fair but not too bad little juices I'm not going to review each from one by one, but from what you get all-in-one package is fantastic

General thought.
How would I rate this that is a good question... I wouldn't see this device suitable for someone that already into DirectLine vaping the first thing they're going to find this mod is not very powerful even at the wattages it's supposed to be. However if someone is literally just started to get into Direct lung vaping or this might be the first sub-ohm device this is a perfect you have everything you require all-in-one kit you have three coils, you have 6x 10ml 70/30 VG PG 0 nicotine juices. Nicely presented and its not very expensive for what you get..

Thank you Manvap

If you maybe interested in seeing further pictures please check out my review on facebook at "Dark Humour Vapes"

From there you may find a link where you may buy at "mutual share monday" also Facebook

Thank you for taking your time to read

Sent from my MAR-LX1B using Tapatalk

[Video 3 min 22 sec, 7/14/20, Gregory Langston, 30,497 views]
Face Mask Comparison Using Vaping
(1) No mask
(2) Cloth mask
(3) Surgical $0.03
(4a) KN95 - poor fit
(4b) KN95 $0.45
(5) N95 $0.63
Login to view embedded media
https://coronavirus.quora.com/Face-Mask-Comparison-Using-Vaping