I was wondering if you could use freebase eliquid in the Caliburn G with the .8 coil using 18mg net eliquid. It seems to be working out fine now. I'm also wondering if a 70/30 blend would be better for the Caliburn G pods to prevent leaks but then I wouldn't get that throat hit, right? Will small drops of eliquid using 50/50 appearing on the bottom of the pod cause the Caliburn to have internal damage, which sometimes appear like condensation coming out which I simply wipe with a tissue? The condensation is very minimal. Has anyone tried using their Caliburn G this way? I was using 6mg eliquid but needed to up the level because it was too weak and I wasn't getting my proper nicotine fix. The reason I like the Caliburn G for net is because it mimics a cigarette a lot with the auto draw. Thank you in advance for your help.

For Sale: Lost Vape Therion Bottom Feeder with Evolv DNA 75 C Screen (rare)
Complete with box, extra bottles, and manual.

Price: $90

Condition: Very Good to Mint

Payment: PayPal or Check

Shipped when payment received or check clears.
Shipping to USA only.

Thank you for viewing.

Looking to get rid of some of my stuff before I move.

Verification: https://i.imgur.com/0MY6W5t.jpg



Mods:

• Dovpo Topside Dual - Black/Gray Splatter - Sealed - $65

GONE:

• Dovpo Topside 90W - Black & Blue/Gold Splatter - Sealed - $OLD
• Dovpo Topside 90W - Black & Blue/Gold Splatter - Sealed - $OLD
  
• Dovpo Topside SQ - Black - Sealed - Comes with extra unused bottle - $OLD
  
• Vandy Vape Pulse v2 - Rainbow Resin - Used Lightly - $OLD
  
• Lost Vape Grus - Puzzle - Sealed - $OLD
  
• Dovpo Topside Replacement Bottle (x2) - Sealed - $OLD
• Asmodus C4 - Purple - USED - $OLD
• Asmodus C4 - Green - USED - $OLD

---------------------

Trades:

Potentially could be interested in higher-end MTL RDAs too, but I'm pretty picky with it as I have most of the stuff I want.

---------------------

Can let you know how much shipping is once you message me based on weight/distance.

Can take Cashapp/Venmo/Zelle.

I cannot take PayPal. My PP is setup through my business and I cannot take personal sales on there. I hope you can understand. I have a very active trading profile on reddit that I'd be happy to link to you to provide some proof.

Plus try our Zip Code Checker to confirm shipping options!

Use code BlackFriday at ejuice.deals for an immediate 30% discount sitewide!

Thanks for your support - we know the industry is under attack, and we greatly appreciate your support over the years. We are here to take care of all your needs!

The OXVA Vativ Super Mod is a convertible AIO to 510 single battery mod, but unlike others that have come before it, this has to be one of the easiest systems to convert.

The OXVA Vativ Super Mod - CHAPTERS

00:00 - Intro and specs
03:03 - Close up
17:52 - Temp Control & Wattage Vape
20:18 - Thoughts


Login to view embedded media

...is a brief video I made a while back that I hope you will enjoy.

Login to view embedded media

Today we are going to take a closer look at the Target 80 from Vaporesso. It has a triangular, cage-like frame, which makes it stand out from other vape mods. When it comes to the 80W, you may think of the Target PM80. What are the differences between them? Let check it out in this review.



Mod:
The Target 80 has a 3000mAh built-in battery with 5-80W output power and 3 output modes: VW/PULSE/F(t) Mode. Its rugged appearance outside and the professional Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.

Tank:
The GTX 26 Pod Tank has a 5ml e-juice capacity. It is composed of GTX 26 Pod and 510 Adapter. Such a design allows you to use the Target 80 with this Pod tank, or with any 510 threaded tanks.

The pod is compatible with all Vaporesso GTX series coils so you can find a coil that suits you better.

Besides, there is a bronze ring around the 510 connector. It has an opening that allows you to put the Target 80 on a chain, or even on a key ring.

What You Can Get From Vaporesso Target 80 Box Kit?
1 x TARGET 80 MOD
1 x GTX 26 POD TANK
1 x GTX 0.2Ω MESH Coil (In-Box)
1 x GTX 0.3Ω MESH Coil (In-Box)
1 x Type-C Cable
1 x User Manual
1 x Warranty Card

Vaporesso Target 80 vs Vaporesso Target PM80


Learn More:
Vaporesso Target 80

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall now to get your new user coupon and enjoy better price of more latest vape kits.


And for any inquires of Vaporesso wholesale or any vape wholesale in China, feel free to contact ElegoMall.

Joyetech eGo Air Kit's lightweight appearance resembles a real cigarette and is designed exclusively for MTL vaping. Meticulously picked for its mouthpiece, it opts for two choices that retain 510-mouthpiece and filter on top, relying on automatic inhalation. First and foremost, it emphasizes the flavor in your mouth and recommends a higher concentration of nicotine. eGo Air accommodates a 2ml capacity tank and is easy to refill via the way of opening the silicone plug on the side. Consuming the e-juice and utilizing a 1.0ohm mesh coil to evenly heat. It provides a long-lasting taste restoration in your mouth. Powered by the 650mAh built-in battery and have been promised to charge for 1 hour fully charged, which results in a long run.




Features:
1. Resemble A Real Cigarette
2. For MTL Vaping
3. 510-mouthpiece And Filter On Top
4. Automatic Inhalation
5. 1.0ohm Mesh Coil
6. 2ml Capacity Tank
7. 650mAh Built-in Battery
...

Click here for more:

Joyetech eGo AIR Kit: Joyetech EGo AIR Kit

Joyetech is proud to introduce a compact starter kit called the Joyetech eGo Air (All-in-one) designed for beginners or users looking for a new lightweight setup. Joyetech eGo Air features a tank and a built-in battery also known as the "All-in-One" design. This "All-in-One" design combines a very slim compact shape with the very convenient battery and eGo Air Pod Cartridge.

The vape Joyetech in USA eGo Air features the Leak-Resistant Cup technology from the Cubis and adds a child-lock feature. The tank is also conveniently filled from the top. The Joyetech eGo Air has a built-in battery with a capacity of 650mAh and comes in various colors. The Joyetech eGo Air can be charged via Micro USB Cable which is included. You can also adjust the indicator light to either red, yellow, green, blue, indigo, white, or purple to match your own personal style and preferences.

The Joyetech eGo Air "All-in-One" Starter Kit is perfect for beginners looking to start vaping without being overwhelmed.You could use the discount code from Vape Shop Online Near Me, Best Online Vape Store For Sale to buy.

Features

• Resemble A Real Cigarette
• For MTL Vaping
• 510-mouthpiece And Filter On Top
• Automatic Inhalation
• 1.0ohm Mesh Coil
• 2ml Capacity Tank
• 650mAh Built-in Battery

Quick Link:

Joyetech eGo Air Pod Cartridge 2ml (5pcs/pack)
Joyetech eGo Air Pod System Kit 650mAh

This thread is for the general discussion of the Product Geekvape Obelisk 65FC: First Fast Charging Pod Mod. Please add to the discussion here.

This thread is for the general discussion of the Product Geekvape Obelisk 65: Tech Chic in Palm.. Please add to the discussion here.

This thread is for the general discussion of the Product Geekvape B100 (Aegis Boost Pro 21700): Boost Pro for pro experience.. Please add to the discussion here.

Freemax M Pro 2 and Old Version M Pro Tank are Freemax M Pro Series Sub Ohm Vape Tanks, while Freemax Fireluke M, Fireluke 2, and Fireluke 3 are Freemax Fireluke Series Sub Ohm Tanks. As for you, which vape tanks do you like best?

Both SS904L M Mesh Coils Series originally for M Pro 2 Tank and M Pro Mesh Coils Series originally for M Pro Tank can support M Pro Series Tanks. What’s more, Freemax M Pro RBA can also be compatible with M Pro Series Sub Ohm Tanks.

All of X Mesh Coils Series originally paired with Fireluke M Tank, TX Mesh Coils Series originally paired with Fireluke 2 Tank, and SS904L X Mesh Coils Series originally paired with Fireluke 3 Tank are able to support Freemax Fireluke Series Sub Ohm Tanks.



Both M Pro Series and Fireluke Series Tanks can provide users the best-vaping experience with good flavor, massive clouds, and coil longevity. As is known to us, Freemax vape devices are highly recognized by the market for their superior cloud, flavor, and coil longevity. So what’s your feedback on Freemax vape products? Do you agree?

SiChro r(s)ta 9.5/10 £225 + shipping

this is from the second drop from the fb group looking to move it on to a new home, any questions feel free to ask

Cabeo batch 2 9/10 condition £125 + shipping

taifun gt4s 9/10 condition £125 + shipping

these two have been sat in a drawer collecting dust for months now so it’s time to move them on to a new home, any questions feel free to ask.

I came across this video in my recommendations for some reason... He makes a compelling case and shares his experience with his father and grandfather dying from cigarettes and his distain for them. He didn't/doesn't like vaping as he has friends that he thinks it annoying.. It's worth a full watch because I think we still live in the past a little and now that vaping has been here about 13 years - we have to realize that there are people (not sure how many) that never smoked, never would smoke but somehow ended up addicted to nicotine..

Login to view embedded media
I'm not really how I feel about what he's said and I'm going to give it more thought. I figured I'd bring it here could give an opinion on it..

The Xros 2 can customize your vaping style from MTL to loose MTL more precisely and the XROS MINI provides the best MTL vaping experience. Which one would you prefers?

This thread is for the general discussion of the Product Suorin Trident Pod Mod Kit 85W. Please add to the discussion here.

Hello, and welcome to another addition of Z-Lee's overly done vape reviews. Today we will be looking at the Onnix 2 which is Freemax's successor to the original Onnix.

I will admit, I've never personally been very attracted to these types of smaller vape gadgets because they feel so dainty, but when Freemax offers me anything - even a leftover half-eaten Halloween Hershey's bar - I'm gonna take it. Why you might ask? Because in all of my experiences with vaping which has become rather extensive in the past 5-6 months (it definitely didn't have anything to do with the pressures of PMTA's, or PACT Act/vape mail banning ), Freemax currently holds the cake for best premade coilheads on the market for RDL/DL vaping in regards to flavor, coil longevity, vape range, and overall performance with the release of their CoilTech 4.0 904L series coils. Innokin kind of holding the fort down in the MTL department. But who doesn't love cake? Okay yes, the kind with homemade frosting - none of that nasty, foamy sugar stuff that comes as a 2-inch layer on top. Anyway, that 904L coil is now being contended with their newest release of the OX-series coil which are specialized for both salt nic and freebase juices. We'll dig deeper into that further down in the review.

First off, I want to thank @Freemax_Jerry for providing me the opportunity to do a review on this product. As always, I will remain neutrally bias and critical in this review (even though I love Freemax, I give credit where it's due, and none where it isn't). If I see potential flaws or areas of needed improvement, you can count on me point them out (within reason - ie. I cannot tell you how this product will perform in 5 years or 20 years being that I do not have that information).

Without further ado, let's dive in.

(All images can be clicked on for easier reading/viewing)

-=-=-=-=-=-=-=-

Overview:

What comes in the box.


Both the Standard Edition and TPD Edition are identical, being that the pod only holds 2 mL of juice anyway.


Basic Features.

The Specs.



The Onnix 2 comes in 6 different colors as seen below.

The finish is a clear gloss which really brings out the vibrant colors on the front and rear panels.


This is the basic breakdown of the Onnix 2 Pod Kit.

There really isn't anything new about this if you are familiar with these styles of vape pens. No need to reinvent the wheel.

The OX-series coils comes in 4 different resistances:

• 0.5 Ohms (CoilTech 4.0)
• 0.8 Ohms (SaltCoilTech 3.0)
• 1.0 Ohms (SaltCoilTech 3.0)
• 1.2 Ohms (SaltCoilTech 3.0)

The 0.5 Ohm OX coil (green) has a "Best Wattage" range of 16-20 Watts and although the Onnix 2 maxes out at 15 Watts, from my experiences with Freemax coils, they have always been able to perform very well, under the recommended Wattages; in fact, I almost exclusively vape them under the recommended range for best flavor since my interest does not lie in crazy vape production. The 0.8 (pre-installed) and 1.0 Ohm coils come included in the box.

I've only used the 0.8 Ohm coil so far, and the only slight negative I've noticed from it so far is that it uses a tad more juice than I'd prefer for a device that has a 2 mL juice capacity (I would estimate 100ish or so puffs before having to refill). However, if you are a salt nic user, you're likely to draw less at a time being that the nic delivery will be more potent and in turn, save both juice consumption and battery life. The 1.0 and 1.2 Ohm coils are only going to further extend these aspects.


The Onnix 2 can be activated by both button and auto-draw.


As noted here, 3 quick clicks of the button to change between activation modes. Auto-draw performance is on par with button activation. Draw suction can be quite light to activate the draw unlike other devices I have used with the same feature. Auto-draw also makes it safe to put in your pocket w/out fear of it activating by accident.


Internal 900 mAh battery with USB-C type charging.

The battery status can be monitored via 3 white glowing lights which appear briefly after each draw. Pictures of this will be shown further down in my personal photos. A 900 mAh drawing at 15 Watts is going to last you quite a long time depending on how often you vape.


Alright, well that about wraps it up...




Okay so, the overview was just a basic layout of what to expect from the Onnix 2 Pod Kit. Below, I will share my experiences with a few up close pictures as well as provide some pros and cons. The great part is, there isn't a whole lot more to this, which is more or less the beauty of a simple vape pen.

I've had this pod kit for about a week and a half now. I've vaped probably 6 or 7 pods worth of juice (2 mL each) through the 0.8 Ohm coil and have had to recharge it three times so far. So pretty much 3 full 900 mAh battery discharges and I'm about a 1/3 through the current charge. So, you're looking at about 2 pods refills per recharge. As mentioned above, if you're rocking salt nics or one of the higher Ohm coils (the 1.0 or 1.2), then you're likely to experience even better results.


My Impressions and Experiences:

Out of the package.

A closer look.

Left Picture:
The bottom side of the pod. The 0.8 Ohm comes pre-installed out of the box. It has a sticker covering the coil connector for safety measures during storage and transport. Remember to remove this.

Middle Picture:
This is a top-down view into the connector pins where the pod slides in. In any pod kit, this is where you're going to see leaking if there is any, either from the air vents that flow through the mod housing and up through the coil (most often condensation), or leaking from the bottom of the pod where the coil seals seat into the pod. I am happy to report that in 11 days, neither of these potential forms of moisture are present in the slightest bit. The magnets are also quite strong, so there's no worries of it popping out during normal use.

Right Picture:
The rubber refill tab is easy to access and is quite thick (almost too thick?). The positive side is that you won't need to worry about tearing the rubber while getting the flange open. I encountered this with the VooPoo Vinci X2. Others have also reported tearing off the Vinci X2 refill tab by accident, so you won't have to worry about that. The negative side is that it makes things a tad more difficult holding it back while refilling. I'll take it if it means a longer lasting pod.


The coils.



Left Picture:
I pulled the pre-installed 0.8 Ohm coil out of the pod to get a closer look at it. The recommended Wattage is 12-15W, but the mod auto-detects this and adjusts as needed.

Right Picture:
A secondary 1.0 Ohm coil comes as an option if you're interested in a higher Ohm coil. The 0.5 and 1.2 Ohm coils will need to be purchased separately if that is your jam.


Priming & Refilling.

Left Picture:
Remember to prime the coil before you pop it into the pod. Squirt enough juice to saturate the exposed wick in each of the 4 juice ports; 3-4 times for each juice port after it soaks in should do the trick. You'll know it's fully saturated when you see a bubble forming outside of the juice ports.

Right Picture:
Rubber refill flange is pulled back exposing a refill hole that very easily fits a chubby gorilla nozzle into it.


Fill 'er up!



Once the coil is primed and inserted into the pod, and then the pod is filled - let sit for 2-3 minutes before vaping. If you do not prime the coil, I would suggest 5+ minutes, possibly more, to allow wick absorption depending on the coil size.
A reminder that the presence of air bubbles are a good thing. It means the vaping/consumption of juice is being properly displaced by air that's filling the growing void. If you don't see bubbles, you can expect dry hits. This applies to all pods and atomizers.


Airflow Holes.

Two needle-sized airflow holes are present on both sides of the pod housing. With both of these uncovered, you can expect a Restricted DL vape. What's great about the auto-draw feature on this pod is, if you want an MTL or Restricted MTL vape, you can use your thumb and finger to cover one or both holes while not having to worry about coordinating that and pressing the fire button at the same time. Unfortunately we weren't born with octopus hands. When people talk about sucking a golf ball through a garden hose, that is what you can expect if you cover both holes.


Battery indicator.



These are pictures of the battery indicating lights while it's charging. The lights pulse and grow from it's current status up to three, in the fashion of airport runway lights. Likewise, while not charging, after you have activated the pod by inhaling, for a brief moment after you stop inhaling, the lights will grow from no lights to its current battery status.

-One white light: 0-35% battery life
-Two white lights: 36-70% battery life
-Three white lights: 71-100% battery life

There is also a blue light that isn't visible here that is situated just above the charging port that can be used to determine activation of certain mod protections based on the number of times it blinks if such a circumstance were to arise. Note that during normal use, this blue light activates as a constant glow until you stop inhaling, and then the battery status lights will come on. This is completely expected and normal.



Final evaluation: Freemax Onnix 2 Pod Kit

I am quite impressed with this tiny little number. As I had mentioned earlier in the review, I'm not generally a fan of these types of vape kits. However, if you stick a turbo (a Freemax coil) in a Toyota Corolla and give me the keys, I'm willing to give it a ride. In this case, it's proven to exceed my expectations by quite a bit. I'm half tempted to go out and grab some salt nic just to see the difference. Freemax coils have always delivered for me, and this is no exception. This will definitely be an on-the-go choice for me if I'm running some errands or don't want to hold a mod in my hand while out and about. Also, I like my mods standing up. While this can stand, it's also tipsy meaning I've knocked it over probably 4x or 5x as much as I have any other kit, and it hasn't even blinked.


-=Pros=-

-Durable
-Extremely light-weight and compact
-Pod magnets are strong
-No leaking
-Auto-draw is flawless

• Makes it safe to pocket w/out worry of activating

-Rubber refill tab is durable
-Refill opening fits chubby gorilla nozzles with ease
-Rubber refill tab is concealed

• Both a pro or con depending on who’s using it

-Battery status reminder via lights after every activation
-FM SaltCoilTech 3.0 OX-series coils knock it out of the park in flavor and vape production

• I’ve only tested this pod kit with freebase juice; salt nic is likely to produce even stronger/better flavor

-=Cons=-

-No manually adjustable Wattage (doesn’t really need it - auto adjusted)
-No permanent adjustable airflow (Loose MTL/Restricted DL by default)

• Can use thumb or thumb and finger to plug one or both air flow holes if needed (Auto-draw makes this very easy)

Before I give a final evaluation, I want the viewer to understand how I rate this. For all values with a Weight of 10, it means this is a high priority for me - what I personally look for in a vape product. The lower the weight, the less this effects my overall judgment. Also bear in mind that I am evaluating this product for its intended purpose. Do I want to be able to fit a 4000 mAh battery in this thing? Yes. Do I want a 510 adapter so I can stick a 35mm atomizer on top of this? Yes, but of course those aren't practical and will not be evaluated as such. The overall rating isn't a computed average of each of these scores, but rather my overall enjoyment of vaping with this product.


Evaluation considerations:

Battery: Weight 10, Evaluation 9
Internal/External, battery capacity, recharge time.

Flavor Production: Weight 10, Evaluation 10
Depth of flavor, full/rich vs. hollow taste.

Vape Production: Weight 6, Evaluation 7
Cloud size, volume, thickness.

Coil Performance (0.8 Ohm): Weight 10, Evaluation 10
Lifespan, dry hitting, chain vaping.

Build Quality: Weight 10, Evaluation 10
Durability, quality, leakage, reliability.

Efficiency (0.8 Ohm): Weight 10, Evaluation 8
Juice consumption.

Size: Weight 3, Evaluation 10
Comfort, pocketing.

Visual Appeal/Style: Weight 7, Evaluation 8
Schmexiness.

Versatility: Weight 5, Evaluation 10
Options, Ohm range, salt nic vs. freebase.

Recommendation: Weight 7, Evaluation 10
Would I pick this as the kit I'd rave about to another vaper?


Final note:

I hope you enjoyed the review and/or learned something about the product. The Freemax Onnix 2 can be purchased from their website here Freemaxvape.com and various other outlets.

Stay tuned for upcoming reviews on the Freemax Marvos 60W & Marvos S 80W.

Cheers and happy vape hoarding.

Looking for attractive 510 non-stubby and non-wide decorative drip tips, ideally in glass, wood or acrylic but open to other materials.

Kind of stuff that the people behind Molehill Mountain Art, Sagewood Art Glass, Stephen Hagstrom, etc. were doing back in the day.

Have had a look around and can't find much aside from ECF threads from 2014 and before, and endless masses of short & wide fugliness in lurid colours with crazy paving effect.

Hit me up with your favourite artisans that are up and running today. If you have images to share then all the better.

I have an older VT Inbox that the tube coming from the 510 has broken off. Is there anyway to replace this tube or is it just trash? Also does anyone know how to take it apart/ Does it use screws , pins or small rivets?
All responses are appreciated.

Louis

TheAuguse Era Billet Adapter is made from stainless steel and suitable for Billet Box Mod.

With the Auguse Era Billet Adapter for billet box, you can use the DotMod AIO RBA Tank Bridge on Billet Box Mod. This Era Billet Adapter can be also used on SXK Billet Box Clone too.

This Auguese Era Billet comse with the adapter frame only. The DotMod AIO RBA Tank and Billet Box Mod is not included.

There are 2 style of Auguse Era Billet Framenow, they comse in the same size but a little bit different on the out frame style.


Auguse Era Billet Rebuildable Tank for Billet Box Mod is suitable for 98% dotmod RBA Bridge Tank, just take some for example, BP Mods Pioneer DotRBA, Auguse EraAio Era Aio RBA, DotMission RBA Bridge Tank and more.

Quick links to get these 2 Billet Box DotAIO Transform Adapter as below >>
Style A >> https://www.3fvape.com/53660-auguse-era-billet-adapter-for-billet-box-mod-style-a.html
Style B >> https://www.3fvape.com/53661-auguse-era-billet-adapter-for-billet-box-mod-style-b.html

The iStick Pico Le Kit is a new product designed by eleaf that looks small and compact, yet elegant and classy. iStick Pico Le is made of Zinc Alloy and leather, with a colour blocked leather design that is pleasing to the eye and a very impressive electronic cigarette kit.

The Eleaf iStick Pico Le Vape kit consists of two parts, iStick Pico Le mod and GX Tank.We will first take a look at the iStick Pico Le Vape mod, we can see by a small LED display, although small, it can also provide you with some necessary data.The GX Tank looks big and should hold a large amount of e-liquid for a day's enjoyment.

If you want to know more details, click vape online store to follow its dynamic, the first time to buy the most affordable electronic cigarette set, that is of course the best.

Quick Link:

Eleaf iStick Pico Le Kit With GX Tank
Eleaf iStick Pico Le Box Mod

Marvos S Kit is paired with Freemax Marvos DTL Pod Tank, which has 4.5ml capacity for long time use and MS mesh coil with adjustable side airflow for RDL and DTL vaping needs.

What’s more, Freemax Marvos DTL Pod Tank is creatively designed with Marvos DTL Pod and a 510 adapter. Oweing to a 510 adapter, it can fit Marvos TCPG DTL Pod, Marvos Glass DTL Pod and Marvos RTA Pod. In another word, Freemax Marvos S 80W Battery Mod can match any kind of vape tank you like best.