Threads
-
Locked
SUORIN AIR MOD REVIEWED BY BIGBOB2322
- By Bigbob2322
- Device Reviews
- 5 Replies
Hello folks and welcome back for todays review of the Air Mod that was sent to me from Suorin for the purpose of this review. The Air Mod is the next evolution in the AIR series of thin mods from Suorin. Like it's siblings before the Air Mod is a very thin device that uses a corner of the mods top portion as it's mouthpiece. Unlike the past AIR devices the Air Mod has adjustable wattage with a 40 watt maximum output with a internal 1500mAh battery. This new version has many upgrades from previous ones that include a auto-draw feature, before I give any more away lets check out the Suorin Air Mod in detail before the review.
COLOR CHOICES
INCLUDED IN THE BOX ( TYPE-C CHARGE CORD IS INCLUDED ALSO )
SPECIFICATIONS
SEMI-TRANSLUCENT FRAME
ADJUSTABLE AIRFLOW
0.96-INCH DISPLAY SCREEN
1500mAh INTERNAL BATTERY WITH TYPE-C
REFINED HEATING
REPLACEABLE SUB-OHM MESH COILS
EXPLODED VIEW
UNBOXING AND FIRST IMPRESSIONS
Suorin packaged the Air Mod as most company's do having the device and coils resting in individual cutouts with your user manual and charge cord sitting below them. Suorin wraps it's devices in a thin piece of plastic for protection against scratches in the shipping process, I like that they do this.
I knew right away before even unwrapping the protective plastic sheet from the mod that it was going to be a fingerprint magnet and indeed it is. I left the wrap on the mod in this first picture so you could see it.
We now have replaceable coils instead of replaceable pods and that's a major upgrade in my opinion, both coils are mesh but the material of the coil is not stated. The 2 coils are 0.6Ω mesh rated at 25-32w and the other coil is the 0.8Ω mesh rated at 16-22w. Displayed is the front of the device with the 0.96 inch display screen bottom left.
The pod portion of this device holds 3ml of juice and as half of the device is it's translucent also. The large sized fill hole has a blue cover gasket that can be rotated out of the way when refiling the pod. I like that half of the mod is translucent showing the circuit board.
As most do the Air Mod's pod is held in place using a magnet that is very strong, your pod will stay in place without coming off. The coils fit inside the pod with the flat edges facing the sides of the device.
Another of the Air Mods features is that you can use it in a traditional fashion of pressing the fire/power button to activate and vape it or you can use the auto-draw feature, I will tell you that the auto-draw works very well and the airflow is smooth. I never had any funny sounds or a whistle at any airflow selection that I tried.
Viewing juice levels is no problem because of the translucent 3ml pod, I like that the cotton juice feed holes on the coils are located very low making it very hard to run the tank dry if your not paying attention to the juice level in the pod.
As all Suorin AIR devices do the mouthpiece is one corner of the device once the pod in in place, this does take some getting used to coming from a traditional mouthpiece but you quickly get used to it.
Because the Air Mod is so thin I suggest keeping it laying flat when not in use, it will stand upright but any little movement on the surface it's standing on will cause it to fall and that's not good for any device. The type-c charge port is located on the bottom of the device.
All your controls are located on the left side and are of the same color of the device as well as being translucent also, I am a button pressing vaper normally because very few devices that have a auto-draw feature actually work well. When auto-draw is activated the disply screen lights just like it would when using the fire button.
Suorins auto-draw is a exception because it works very well and because of the mouthpiece being the top corner of the mod it's so much easier to operate the device using the auto-draw than having to hold the mod in a certain position in order to press the fire button, using auto-draw you can vape the device in any hand position comfortably.
There is a airflow selector on the Air Mod that when fully closed down gives a very nice semi-tight MTL draw and when fully open gives a very nice RDL vape. Unfortunately the resistance is almost 0 on the control, when put in a pocket the airflow setting you selected will come off that setting very easily, luckily for me I like it wide open and that only requires a swipe down with my finger or thumb, precise settings are difficult with the control lever being so loose.
As mentioned earlier the Air Mod has a nice bright display screen with fonts that are easy to read and the layout is also done very well. Screen layout listed below from top to bottom.
* BATTERY BAR
* WATTAGE
* PUFF COUNTER
* COIL OHM
* SECONDS OF LAST VAPE
Being a wattage only device makes the menu system easy to navigate, there really is no menu just a couple of button combinations that are listed below.
* ON/OFF - 5 QUICK PRESSES OF THE FIRE/POWER BUTTON
* WATTAGE LOCK/UNLOCK - HOLD BOTH ADJUSTMENT BUTTONS SIMULTANEOUSLY
* CLEARING THE PUFF COUNTER - HOLD BOTH ADJUSTMENT BUTTONS SIMULTANEOUSLY
USING THE AIR MOD
Well folks I will tell you that I had hoped that with the introduction of replaceable coils on this latest device in the AIR series of devices that they would be good flavor producers and they are, I would say they are better than your average coil.
I used a juice that I know very well and both coils gave me a well saturated flavorful vape, using the 0.6Ω mesh coil at 30w gave me my sweet spot for flavor and warmth with the airflow fully open.
Using the 0.8Ω mesh coil was equally pleasing but I lost a touch of warmth, airflow was reduced as well being of a smaller diameter. You can use the the 0.8Ω in a MTL fashion and it performs very well.
Keeping the Air Mod free of fingerprints is impossible, if this device had a matt finish it would be so much better, I hope future releases will have a matt finish, having a shiny surface is pretty but covered in fingerprints not so much. ( LISTEN TO ME SUORIN ).
Being as thin as it is it will disappear almost anywhere you choose to carry it, in a pocket you won't even notice it. For a device of this size it's really lightweight.
Battery management is also very good giving the device another big plus of the many that it has. Using the 0.6Ω coil I averaged between 330-336 vapes on a fully charged battery, using the 0.8Ω I averaged 352-360 vapes on a fully charged battery.
My only 2 negatives with the Air Mod is the airflow selector switch/lever being way to loose to function other than wide open or fully closed down for a tight MTL vape. Being as nice looking as it is being a fingerprint magnet tarnishes it's look after using for a short time.
PROS
* THIN
* FAIRLY LIGHTWEIGHT
* VERY GOOD FLAVOR
* TYPE-C CHARGE PORT
* 3ML POD CAPACITY
* BRIGHT DISPLAY
* SMOOTH AIRFLOW
* GREAT AUTO-DRAW
* VERY FAST SCROLLING
* TRANSLUCENT POD AND HALF OF THE MOD
CONS
* AIRFLOW CONTROL VERY LOOSE
* FINGERPRINT MAGNET
I would like to thank Mira and SUORIN for providing the latest in the AIR series of devices the AIR MOD. I hope that my review helped answer any questions many of you looking to purchase the AIR MOD had.
THANK YOU
BIGBOB2322
COLOR CHOICES
INCLUDED IN THE BOX ( TYPE-C CHARGE CORD IS INCLUDED ALSO )
SPECIFICATIONS
SEMI-TRANSLUCENT FRAME
ADJUSTABLE AIRFLOW
0.96-INCH DISPLAY SCREEN
1500mAh INTERNAL BATTERY WITH TYPE-C
REFINED HEATING
REPLACEABLE SUB-OHM MESH COILS
EXPLODED VIEW
UNBOXING AND FIRST IMPRESSIONS
Suorin packaged the Air Mod as most company's do having the device and coils resting in individual cutouts with your user manual and charge cord sitting below them. Suorin wraps it's devices in a thin piece of plastic for protection against scratches in the shipping process, I like that they do this.
I knew right away before even unwrapping the protective plastic sheet from the mod that it was going to be a fingerprint magnet and indeed it is. I left the wrap on the mod in this first picture so you could see it.
We now have replaceable coils instead of replaceable pods and that's a major upgrade in my opinion, both coils are mesh but the material of the coil is not stated. The 2 coils are 0.6Ω mesh rated at 25-32w and the other coil is the 0.8Ω mesh rated at 16-22w. Displayed is the front of the device with the 0.96 inch display screen bottom left.
The pod portion of this device holds 3ml of juice and as half of the device is it's translucent also. The large sized fill hole has a blue cover gasket that can be rotated out of the way when refiling the pod. I like that half of the mod is translucent showing the circuit board.
As most do the Air Mod's pod is held in place using a magnet that is very strong, your pod will stay in place without coming off. The coils fit inside the pod with the flat edges facing the sides of the device.
Another of the Air Mods features is that you can use it in a traditional fashion of pressing the fire/power button to activate and vape it or you can use the auto-draw feature, I will tell you that the auto-draw works very well and the airflow is smooth. I never had any funny sounds or a whistle at any airflow selection that I tried.
Viewing juice levels is no problem because of the translucent 3ml pod, I like that the cotton juice feed holes on the coils are located very low making it very hard to run the tank dry if your not paying attention to the juice level in the pod.
As all Suorin AIR devices do the mouthpiece is one corner of the device once the pod in in place, this does take some getting used to coming from a traditional mouthpiece but you quickly get used to it.
Because the Air Mod is so thin I suggest keeping it laying flat when not in use, it will stand upright but any little movement on the surface it's standing on will cause it to fall and that's not good for any device. The type-c charge port is located on the bottom of the device.
All your controls are located on the left side and are of the same color of the device as well as being translucent also, I am a button pressing vaper normally because very few devices that have a auto-draw feature actually work well. When auto-draw is activated the disply screen lights just like it would when using the fire button.
Suorins auto-draw is a exception because it works very well and because of the mouthpiece being the top corner of the mod it's so much easier to operate the device using the auto-draw than having to hold the mod in a certain position in order to press the fire button, using auto-draw you can vape the device in any hand position comfortably.
There is a airflow selector on the Air Mod that when fully closed down gives a very nice semi-tight MTL draw and when fully open gives a very nice RDL vape. Unfortunately the resistance is almost 0 on the control, when put in a pocket the airflow setting you selected will come off that setting very easily, luckily for me I like it wide open and that only requires a swipe down with my finger or thumb, precise settings are difficult with the control lever being so loose.
As mentioned earlier the Air Mod has a nice bright display screen with fonts that are easy to read and the layout is also done very well. Screen layout listed below from top to bottom.
* BATTERY BAR
* WATTAGE
* PUFF COUNTER
* COIL OHM
* SECONDS OF LAST VAPE
Being a wattage only device makes the menu system easy to navigate, there really is no menu just a couple of button combinations that are listed below.
* ON/OFF - 5 QUICK PRESSES OF THE FIRE/POWER BUTTON
* WATTAGE LOCK/UNLOCK - HOLD BOTH ADJUSTMENT BUTTONS SIMULTANEOUSLY
* CLEARING THE PUFF COUNTER - HOLD BOTH ADJUSTMENT BUTTONS SIMULTANEOUSLY
USING THE AIR MOD
Well folks I will tell you that I had hoped that with the introduction of replaceable coils on this latest device in the AIR series of devices that they would be good flavor producers and they are, I would say they are better than your average coil.
I used a juice that I know very well and both coils gave me a well saturated flavorful vape, using the 0.6Ω mesh coil at 30w gave me my sweet spot for flavor and warmth with the airflow fully open.
Using the 0.8Ω mesh coil was equally pleasing but I lost a touch of warmth, airflow was reduced as well being of a smaller diameter. You can use the the 0.8Ω in a MTL fashion and it performs very well.
Keeping the Air Mod free of fingerprints is impossible, if this device had a matt finish it would be so much better, I hope future releases will have a matt finish, having a shiny surface is pretty but covered in fingerprints not so much. ( LISTEN TO ME SUORIN ).
Being as thin as it is it will disappear almost anywhere you choose to carry it, in a pocket you won't even notice it. For a device of this size it's really lightweight.
Battery management is also very good giving the device another big plus of the many that it has. Using the 0.6Ω coil I averaged between 330-336 vapes on a fully charged battery, using the 0.8Ω I averaged 352-360 vapes on a fully charged battery.
My only 2 negatives with the Air Mod is the airflow selector switch/lever being way to loose to function other than wide open or fully closed down for a tight MTL vape. Being as nice looking as it is being a fingerprint magnet tarnishes it's look after using for a short time.
PROS
* THIN
* FAIRLY LIGHTWEIGHT
* VERY GOOD FLAVOR
* TYPE-C CHARGE PORT
* 3ML POD CAPACITY
* BRIGHT DISPLAY
* SMOOTH AIRFLOW
* GREAT AUTO-DRAW
* VERY FAST SCROLLING
* TRANSLUCENT POD AND HALF OF THE MOD
CONS
* AIRFLOW CONTROL VERY LOOSE
* FINGERPRINT MAGNET
I would like to thank Mira and SUORIN for providing the latest in the AIR series of devices the AIR MOD. I hope that my review helped answer any questions many of you looking to purchase the AIR MOD had.
THANK YOU
BIGBOB2322
-
Locked
【Flash Sale】 20% Off On All & Celebrating Women's Equality Day!
- Innokin Technology
- 0 Replies
Hey ECF,
The Women’s Equality Day – August 26 just pass.
It's the perfect time to say thank you to all the ladies who have played essential roles in our lives. We never forget the contribution of women to the world.
Here at Innokin, we can confidently say our business has achieved equality across the board. We ensure sure that women are equal to men in the workplace. This not only relates to the money received but also the opportunities that come as well.
Suprise~ we have prepared a special discount for this occasion!
Celebrate it with us!
Save 20% on all right now --> A Better Vape Experience | Innokin Store
Use promo code: AUG26 for 20% off on your purchase.
Enter the promo code during the checkout and take advantage of the offer.
Please note the promo code will be available until 31st, August 2021 (23:59 GMT+1).
BTW, How was your day on that date? We would love to hear from you.
Please share your thoughts with us and comment below.
Thank you for always support and encourage us.
Best Regards,
Innokin Team
The Women’s Equality Day – August 26 just pass.
It's the perfect time to say thank you to all the ladies who have played essential roles in our lives. We never forget the contribution of women to the world.
Here at Innokin, we can confidently say our business has achieved equality across the board. We ensure sure that women are equal to men in the workplace. This not only relates to the money received but also the opportunities that come as well.
Suprise~ we have prepared a special discount for this occasion!
Celebrate it with us!Save 20% on all right now --> A Better Vape Experience | Innokin Store
Use promo code: AUG26 for 20% off on your purchase.
Enter the promo code during the checkout and take advantage of the offer.
Please note the promo code will be available until 31st, August 2021 (23:59 GMT+1).
BTW, How was your day on that date? We would love to hear from you.
Please share your thoughts with us and comment below.
Thank you for always support and encourage us.
Best Regards,
Innokin Team
-
Locked
Vandy Vape Kylin M Pro RTA - Large Capacity Still Great Flavor
The Vandy Vape Kylin M Pro RTA Rebuildable Tank Vape Atomizer provides a large 8.0ml bubble grass to refill the vape juice that offers the simplest and most sanitary way by its top filling system, have a long vaping session is a piece of cake. It also pondering its anti-Leak design to further prevent leakage. It exudes elegance with its meticulous and crafted mouthpiece, paired with its top airflow ring, you will have an awesome and exciting throat hit and vaping experience. Kylin M Pro RTA accepts a range of M class coils that generates a massive vapor.
The Pro Kylin M RTA has large juice capacity in a compact construction. It brings the excellent flavor and superb experience of KYLIN M.
The Vandy Vape kylin m pro RTA and Kylin M RTA are almost the same size. Kylin M Pro increases the e-liquid volume to 8mL by engraving the cnc inside the hardware, which greatly increses the e-liquid storage capacity.
The kylin M Pro has top airflow intak, anti-leaking. Kylim M Pro has a wide range of the mesh style coils in different resistance for different user's habits. With easy building deck, the pro one brings excellent flavor as the kylin M.
Features:
Size: 33.35mm (H) x 24.22mm (D)
Capacity: 6.0ml / 8.0ml
Large Juice Capacity
Compact Size
Top Filling
Top Airflow
Anti-Leak Design
Coils: M Class Coils
8.0ml large juice capacity in a compact construction
Top airflow intake, anti-leaking
Long service life and replaceable mesh coil
Easy building methods
Top refilling system
More details for Kylin M Pro, please check >> https://www.3fvape.com/51757-vandy-vape-kylin-m-pro-rta.html
Recommend mods to match this Tank as below >>
Lost Vape Thelema Quest 200W
Asvape Prolog 200W
Dovpo Odin 200
GeekVape OBELISK 200
-
Locked
Vandy Vape PR SE Kit - Review by Javichu (Sourcemore)
- By Javichu
- Sourcemore
- 1 Replies
Hello there fellow vaperinos
Time for another review of a vaping apparatus,i like using the word ''apparatus'' it makes me seem smart,cultured and intelligent...sure hope so
I received this kit from Sourcemore for the purpose of this review.
This time i am stepping on to uncharted territory,i am about to use/review my first squonk apparatus.
Even thou i have never squonked before hence never pumped a bottle in a mod i did own a pair of Reebok sneakers when i was a kid so i am highly confident in my ''pumping'' skills.
Ok time to get serious.
All contents of the kit displayed so you can see what you get when you purchase the Vandy Vape PR SE Kit:
(2 items missing from the picture,little baggie with 2 coils are incliuded and a small tool to help you lift the tab on the bottom cap when you are going to refill the squonk bottle)
Since this kit comes with the Pulse V2 Mod and the Requiem RDA i am going to do two separate reviews of each item but in the same post,will start with the Requiem RDA.
The Requiem RDA is an RDA designed by a fellow Spaniard ''El Mono Vapeador'' famous reviewer in Youtube here in Spain and in some countries of South/Central America.
Time to get a look of said RDA with some of its specifications:
Full look at the deck of the Requiem RDA:
The Requiem RDA comes with 3 different caps so you can use it in MTL/RDL or DL mode:
Here you can see it in all its glory on top of the Vandy Vape Pulse V2:
Package Contents:
1x Requiem RDA
1x Coil Guide 2,5mm
2x Fused Clapton Coil 2,5mm 0,26Ω
3x Caps air configuration
1x Accessory bag
1x User Manual
First impressions:
Tiny looking RDA but cute,adding the beauty ring it does give it a nice look.
Keep in mind it is a 22mm atty and it goes up to 24mm if you add the beauty ring (you can see the beauty ring in the last photo)
Removing the cap reveals the base which features some good ol' chunky flat top screws which makes it a breeze when it comes to installing the coils.
Setup (coil and wicking):
Truth be told i am a klutz...yeah you read right,usually takes me a long time to get the coil put in but in this case it was an easy task.
Same goes for the wicking,with new RDA/RTA i have to rewick a couple of times (at least) until i get it right...not in this case.
The wicking was flawless so after doing some pumping i was ready to give this bad boy a try.
Not a MTL vaper but to do a proper review i had to give it a try.
So i loaded up the bottle with some nic salts and started vaping...wow,very good flavor and a nice,nice i mean NICE hit.
But since i don't enjoy MTL that much take off the MTL cap and put in the RTL cap,kept the same nic salts and started.
Now this right here hit the spot...actually liked it so much i had to change the bottle and put in my usual none nic salt e-liquid at 4.5mg nic.
Filled the bottle all the way to the top and used it all day without even looking at my other everyday use atomizer.
The very next day when it was time for my first daily espresso and checking emails i decided to give the DL cap a try.
While it did give the ''true'' DL experience i didn't really enjoy it as much as the RDL cap,what can i say? I am more of a middle type of guy.
Somewhere between MTL and DL is my butter zone,that is where i truly enjoy my vaping experience.
With all 3 caps (MTL,RDL and DL) you can slighly adjust the airflow by rotating the outer ring but truth be told you can't really adjust that much.
If you really want to change lets say from DL to a more restricted vape you are better off just putting on the RDL cap.
Overall impressions:
Well made atomizer with a lot of versatility since you can just switch caps whenever you feel like it and change to whatever vaping style you are in the mood for.
Even thou i have never squonked there was no leaking...just one time and that was user error since i over pumped.
If you are a squonker and you're looking for a RDA with versatility that lets you switch vaping styles this is the RDA for you but if you're looking for a dripper i would recommend you look elsewhere,this atty just doesn't seem designed for that purpose.
Word of advice,if you have big chunky and sexy lips like mine the drip tip on the cap for DL mode will not work for you.
This was a major con for me,tried using it and when i went to puff i basically covered the airflow holes with my lips.
Doesn't seem like a big deal,you can just use another drip tip that is a bit taller but aesthetically wise the atty will lose its unique look.
The drip tip that comes with the DL cap is just way,way...way to low.
PROS:
- Three airflow caps included (MTL,RDL,DL)
- Easy to build coil wise
- Good flavor and cloud production
- Wicking is easy
- Nice luxury high end look and quality for a good and fair price
CONS:
- DL drip tip is way to low...people with big lips will have to change the drip tip for a taller one.
- Tight Airflow Ring
- Top cap too tight is very tight,even if you lubricate the rings and difficult to turn or remove.
- RDA is noisy and whistles when used with the DL cap,not a deal breaker for me but some might find it annoying.
Ok so half of the review is done,now i am only left with the review of the Pulse V2.
But i am so tired,need a small 5 second break and maybe have a cocktail
5.....
4....
3...
2..
1.
Now that i am fully recuperated it is time to tackle on the review of the Pulse V2.
Gotta be honest,never squonked before and since i like to do a proper review i had to watch some videos of the Pulse V2 so i would know how to put it all together and how to operate it.
Let us start with a nice picture so you can see the color schemes available for the Pulse V2:
SPECIFICATIONS:
Size: 82.3mm x 28.4mm x 54.7mm
Power Range: 5-95W
Single 21700/20700/18650 Battery
Power, TC, TCR, Bypass, VPC Modes
Waterproof Chip (Mod is not Waterproof)
Full Color Display
Can be Controlled w/ Vandy App
7ml Squonk Bottle Capacity
Bottom Filled Bottle
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-6.0V
Maximum Ouput Current Protecion: <34A
Coil resistance range: 0.05-3Ω
Contents pertaining the mod:
-1 x Pulse V2 Mod
-1 x 18650 Battery Adapter
-2 x 7ml Squonk Bottles
-1 x Type-C Cable
-1 x Metal tool to lift the tab of the filling cap
-1 x Instruction Manual
-1 x Proper User Guidance
-1 x Warranty Card
First impressions:
First of all i have to say i am not a fan of plastic mods,rubber on the outside is ok (loved my JACKAROO) so i was a bit hesitant of this mod.
But once i had it in my hand i was put the ease,even thou i am not a fan of the material i did like the way it was made.
Well rounded edges and it fit nicely in my hand so nothing to worry about,i was ready to get started.
Pulse V2 Button Combinations
-Turn the Pulse V2 On or Off: Press the fire button 5 times.
-Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
-Adjust settings in your current mode: Press the fire button 4 times.
-Enter the Menu: Hold the up and down adjustment buttons.
-Lock the mod: Hold the + adjustment button and fire button together.
-Flip the Screen: Hold the – adjustment button and fire button together.
-Stealth Mode: Hold both adjustment buttons and the fire button together.
My Requiem RDA was all primed and ready so it was time to try out the Pulse V2.
(atomizer size the Pulse V2 can fit up to a 26 mm atomizer without overhang)
I put in the 21700 Battery (Perhaps user error but i did scrape off some of the wrap on the battery)
Due to its bottom filling design the squonk bottle was filled with no hassle nor excess of liquid.
Screw in the cap and you ready to go.
First time squonker so i removed the top cap to see how much pumping i would need to keep the wick nice and wet.
Good feature (don't know if other squonk mods have it) is that once you release the pressure off the squonk bottle the excess of the e-liquid will go back in the bottle...awesome right?
I have used the Pulse V2 for about a week and haven't had any deal breaking issues.
It is a well designed and contructed squonking apparatus that does its job.
Was a bit worried about the panels but after a week of use i have to say i had no problems with them.
Magnets are strong and kept the panels in their place and well adjusted,no wobbly wibbly action with any of the 2 panels.
This device also has a TC mode but i haven't tested that since i have always been a vaper who just uses wattage mode.
So i can't really comment on the performance of TC mode.
Also this mod comes with a feature that lets you control certain aspects of your mod with an app called ''The Vandy App'' which you can find for Android and IPhone.
Since i don't own a smartphone i was unable to use this app but i have read a lot of other reviews and some people have used it with some conectivity problems.
If you are techy techy kinda person i guess this app is for you but for me personally it is just easier to use the mod itself to change for example the wattage i am using at the moment.
I was a bit afraid stepping my toes into the squonking scene since i never did it before but this mod just made my transition so much easier than i thought.
Pros:
-Water resistant and easy to clean
-You can swap the panels for customization
-Great build quality
-Nice compact size and lightweight
-Color and very bright screen
Cons:
- TC mode is not up to par
- Problems with app connectivity
(the above cons i have not experienced personally but i had heard from other reviewers,just thought i would post it as a disclaimer)
Would i recommend the Pulse V2?
Well for a newbie the answer would have to be most definitely,it was so easy to setup and get started with it that all my previous worries were just cast aside.
For a experienced squonker? well i can't really answer that question since this is the first time i tried a squonk mod.
If you are interested in purchasing this kit feel free to use this code supplied to me by the people of Sourcemore:
$50.88 - Vandy Vape PR SE Kit
Code: PRSEK
Thanks again to @Ema from Sourcemore for sending me this kit for the purpose of the review,much appreciated.
Ok so that is it folks,this was quite a lengthy review but i hope you enjoyed reading it.
Time for another review of a vaping apparatus,i like using the word ''apparatus'' it makes me seem smart,cultured and intelligent...sure hope so
I received this kit from Sourcemore for the purpose of this review.
This time i am stepping on to uncharted territory,i am about to use/review my first squonk apparatus.
Even thou i have never squonked before hence never pumped a bottle in a mod i did own a pair of Reebok sneakers when i was a kid so i am highly confident in my ''pumping'' skills.
Ok time to get serious.
All contents of the kit displayed so you can see what you get when you purchase the Vandy Vape PR SE Kit:
(2 items missing from the picture,little baggie with 2 coils are incliuded and a small tool to help you lift the tab on the bottom cap when you are going to refill the squonk bottle)
Since this kit comes with the Pulse V2 Mod and the Requiem RDA i am going to do two separate reviews of each item but in the same post,will start with the Requiem RDA.
The Requiem RDA is an RDA designed by a fellow Spaniard ''El Mono Vapeador'' famous reviewer in Youtube here in Spain and in some countries of South/Central America.
Time to get a look of said RDA with some of its specifications:
Full look at the deck of the Requiem RDA:
The Requiem RDA comes with 3 different caps so you can use it in MTL/RDL or DL mode:
Here you can see it in all its glory on top of the Vandy Vape Pulse V2:
Package Contents:
1x Requiem RDA
1x Coil Guide 2,5mm
2x Fused Clapton Coil 2,5mm 0,26Ω
3x Caps air configuration
1x Accessory bag
1x User Manual
First impressions:
Tiny looking RDA but cute,adding the beauty ring it does give it a nice look.
Keep in mind it is a 22mm atty and it goes up to 24mm if you add the beauty ring (you can see the beauty ring in the last photo)
Removing the cap reveals the base which features some good ol' chunky flat top screws which makes it a breeze when it comes to installing the coils.
Setup (coil and wicking):
Truth be told i am a klutz...yeah you read right,usually takes me a long time to get the coil put in but in this case it was an easy task.
Same goes for the wicking,with new RDA/RTA i have to rewick a couple of times (at least) until i get it right...not in this case.
The wicking was flawless so after doing some pumping i was ready to give this bad boy a try.
Not a MTL vaper but to do a proper review i had to give it a try.
So i loaded up the bottle with some nic salts and started vaping...wow,very good flavor and a nice,nice i mean NICE hit.
But since i don't enjoy MTL that much take off the MTL cap and put in the RTL cap,kept the same nic salts and started.
Now this right here hit the spot...actually liked it so much i had to change the bottle and put in my usual none nic salt e-liquid at 4.5mg nic.
Filled the bottle all the way to the top and used it all day without even looking at my other everyday use atomizer.
The very next day when it was time for my first daily espresso and checking emails i decided to give the DL cap a try.
While it did give the ''true'' DL experience i didn't really enjoy it as much as the RDL cap,what can i say? I am more of a middle type of guy.
Somewhere between MTL and DL is my butter zone,that is where i truly enjoy my vaping experience.
With all 3 caps (MTL,RDL and DL) you can slighly adjust the airflow by rotating the outer ring but truth be told you can't really adjust that much.
If you really want to change lets say from DL to a more restricted vape you are better off just putting on the RDL cap.
Overall impressions:
Well made atomizer with a lot of versatility since you can just switch caps whenever you feel like it and change to whatever vaping style you are in the mood for.
Even thou i have never squonked there was no leaking...just one time and that was user error since i over pumped.
If you are a squonker and you're looking for a RDA with versatility that lets you switch vaping styles this is the RDA for you but if you're looking for a dripper i would recommend you look elsewhere,this atty just doesn't seem designed for that purpose.
Word of advice,if you have big chunky and sexy lips like mine the drip tip on the cap for DL mode will not work for you.
This was a major con for me,tried using it and when i went to puff i basically covered the airflow holes with my lips.
Doesn't seem like a big deal,you can just use another drip tip that is a bit taller but aesthetically wise the atty will lose its unique look.
The drip tip that comes with the DL cap is just way,way...way to low.
PROS:
- Three airflow caps included (MTL,RDL,DL)
- Easy to build coil wise
- Good flavor and cloud production
- Wicking is easy
- Nice luxury high end look and quality for a good and fair price
CONS:
- DL drip tip is way to low...people with big lips will have to change the drip tip for a taller one.
- Tight Airflow Ring
- Top cap too tight is very tight,even if you lubricate the rings and difficult to turn or remove.
- RDA is noisy and whistles when used with the DL cap,not a deal breaker for me but some might find it annoying.
Ok so half of the review is done,now i am only left with the review of the Pulse V2.
But i am so tired,need a small 5 second break and maybe have a cocktail
5.....
4....
3...
2..
1.
Now that i am fully recuperated it is time to tackle on the review of the Pulse V2.
Gotta be honest,never squonked before and since i like to do a proper review i had to watch some videos of the Pulse V2 so i would know how to put it all together and how to operate it.
Let us start with a nice picture so you can see the color schemes available for the Pulse V2:
SPECIFICATIONS:
Size: 82.3mm x 28.4mm x 54.7mm
Power Range: 5-95W
Single 21700/20700/18650 Battery
Power, TC, TCR, Bypass, VPC Modes
Waterproof Chip (Mod is not Waterproof)
Full Color Display
Can be Controlled w/ Vandy App
7ml Squonk Bottle Capacity
Bottom Filled Bottle
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-6.0V
Maximum Ouput Current Protecion: <34A
Coil resistance range: 0.05-3Ω
Contents pertaining the mod:
-1 x Pulse V2 Mod
-1 x 18650 Battery Adapter
-2 x 7ml Squonk Bottles
-1 x Type-C Cable
-1 x Metal tool to lift the tab of the filling cap
-1 x Instruction Manual
-1 x Proper User Guidance
-1 x Warranty Card
First impressions:
First of all i have to say i am not a fan of plastic mods,rubber on the outside is ok (loved my JACKAROO) so i was a bit hesitant of this mod.
But once i had it in my hand i was put the ease,even thou i am not a fan of the material i did like the way it was made.
Well rounded edges and it fit nicely in my hand so nothing to worry about,i was ready to get started.
Pulse V2 Button Combinations
-Turn the Pulse V2 On or Off: Press the fire button 5 times.
-Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
-Adjust settings in your current mode: Press the fire button 4 times.
-Enter the Menu: Hold the up and down adjustment buttons.
-Lock the mod: Hold the + adjustment button and fire button together.
-Flip the Screen: Hold the – adjustment button and fire button together.
-Stealth Mode: Hold both adjustment buttons and the fire button together.
My Requiem RDA was all primed and ready so it was time to try out the Pulse V2.
(atomizer size the Pulse V2 can fit up to a 26 mm atomizer without overhang)
I put in the 21700 Battery (Perhaps user error but i did scrape off some of the wrap on the battery)
Due to its bottom filling design the squonk bottle was filled with no hassle nor excess of liquid.
Screw in the cap and you ready to go.
First time squonker so i removed the top cap to see how much pumping i would need to keep the wick nice and wet.
Good feature (don't know if other squonk mods have it) is that once you release the pressure off the squonk bottle the excess of the e-liquid will go back in the bottle...awesome right?
I have used the Pulse V2 for about a week and haven't had any deal breaking issues.
It is a well designed and contructed squonking apparatus that does its job.
Was a bit worried about the panels but after a week of use i have to say i had no problems with them.
Magnets are strong and kept the panels in their place and well adjusted,no wobbly wibbly action with any of the 2 panels.
This device also has a TC mode but i haven't tested that since i have always been a vaper who just uses wattage mode.
So i can't really comment on the performance of TC mode.
Also this mod comes with a feature that lets you control certain aspects of your mod with an app called ''The Vandy App'' which you can find for Android and IPhone.
Since i don't own a smartphone i was unable to use this app but i have read a lot of other reviews and some people have used it with some conectivity problems.
If you are techy techy kinda person i guess this app is for you but for me personally it is just easier to use the mod itself to change for example the wattage i am using at the moment.
I was a bit afraid stepping my toes into the squonking scene since i never did it before but this mod just made my transition so much easier than i thought.
Pros:
-Water resistant and easy to clean
-You can swap the panels for customization
-Great build quality
-Nice compact size and lightweight
-Color and very bright screen
Cons:
- TC mode is not up to par
- Problems with app connectivity
(the above cons i have not experienced personally but i had heard from other reviewers,just thought i would post it as a disclaimer)
Would i recommend the Pulse V2?
Well for a newbie the answer would have to be most definitely,it was so easy to setup and get started with it that all my previous worries were just cast aside.
For a experienced squonker? well i can't really answer that question since this is the first time i tried a squonk mod.
If you are interested in purchasing this kit feel free to use this code supplied to me by the people of Sourcemore:
$50.88 - Vandy Vape PR SE Kit
Code: PRSEK
Thanks again to @Ema from Sourcemore for sending me this kit for the purpose of the review,much appreciated.
Ok so that is it folks,this was quite a lengthy review but i hope you enjoyed reading it.
-
Locked
Vandy Vape PR SE Kit - Review by Javichu
- By Javichu
- Device Reviews
- 7 Replies
Hello there fellow vaperinos
Time for another review of a vaping apparatus,i like using the word ''apparatus'' it makes me seem smart,cultured and intelligent...sure hope so
I received this kit from Sourcemore for the purpose of this review.
This time i am stepping on to uncharted territory,i am about to use/review my first squonk apparatus.
Even thou i have never squonked before hence never pumped a bottle in a mod i did own a pair of Reebok sneakers when i was a kid so i am highly confident in my ''pumping'' skills.
Ok time to get serious.
All contents of the kit displayed so you can see what you get when you purchase the Vandy Vape PR SE Kit:
(2 items missing from the picture,little baggie with 2 coils are incliuded and a small tool to help you lift the tab on the bottom cap when you are going to refill the squonk bottle)
Since this kit comes with the Pulse V2 Mod and the Requiem RDA i am going to do two separate reviews of each item but in the same post,will start with the Requiem RDA.
The Requiem RDA is an RDA designed by a fellow Spaniard ''El Mono Vapeador'' famous reviewer in Youtube here in Spain and in some countries of South/Central America.
Time to get a look of said RDA with some of its specifications:
Full look at the deck of the Requiem RDA:
The Requiem RDA comes with 3 different caps so you can use it in MTL/RDL or DL mode:
Here you can see it in all its glory on top of the Vandy Vape Pulse V2:
Package Contents:
1x Requiem RDA
1x Coil Guide 2,5mm
2x Fused Clapton Coil 2,5mm 0,26Ω
3x Caps air configuration
1x Accessory bag
1x User Manual
First impressions:
Tiny looking RDA but cute,adding the beauty ring it does give it a nice look.
Keep in mind it is a 22mm atty and it goes up to 24mm if you add the beauty ring (you can see the beauty ring in the last photo)
Removing the cap reveals the base which features some good ol' chunky flat top screws which makes it a breeze when it comes to installing the coils.
Setup (coil and wicking):
Truth be told i am a klutz...yeah you read right,usually takes me a long time to get the coil put in but in this case it was an easy task.
Same goes for the wicking,with new RDA/RTA i have to rewick a couple of times (at least) until i get it right...not in this case.
The wicking was flawless so after doing some pumping i was ready to give this bad boy a try.
Not a MTL vaper but to do a proper review i had to give it a try.
So i loaded up the bottle with some nic salts and started vaping...wow,very good flavor and a nice,nice i mean NICE hit.
But since i don't enjoy MTL that much take off the MTL cap and put in the RTL cap,kept the same nic salts and started.
Now this right here hit the spot...actually liked it so much i had to change the bottle and put in my usual none nic salt e-liquid at 4.5mg nic.
Filled the bottle all the way to the top and used it all day without even looking at my other everyday use atomizer.
The very next day when it was time for my first daily espresso and checking emails i decided to give the DL cap a try.
While it did give the ''true'' DL experience i didn't really enjoy it as much as the RDL cap,what can i say? I am more of a middle type of guy.
Somewhere between MTL and DL is my butter zone,that is where i truly enjoy my vaping experience.
With all 3 caps (MTL,RDL and DL) you can slighly adjust the airflow by rotating the outer ring but truth be told you can't really adjust that much.
If you really want to change lets say from DL to a more restricted vape you are better off just putting on the RDL cap.
Overall impressions:
Well made atomizer with a lot of versatility since you can just switch caps whenever you feel like it and change to whatever vaping style you are in the mood for.
Even thou i have never squonked there was no leaking...just one time and that was user error since i over pumped.
If you are a squonker and you're looking for a RDA with versatility that lets you switch vaping styles this is the RDA for you but if you're looking for a dripper i would recommend you look elsewhere,this atty just doesn't seem designed for that purpose.
Word of advice,if you have big chunky and sexy lips like mine the drip tip on the cap for DL mode will not work for you.
This was a major con for me,tried using it and when i went to puff i basically covered the airflow holes with my lips.
Doesn't seem like a big deal,you can just use another drip tip that is a bit taller but aesthetically wise the atty will lose its unique look.
The drip tip that comes with the DL cap is just way,way...way to low.
PROS:
- Three airflow caps included (MTL,RDL,DL)
- Easy to build coil wise
- Good flavor and cloud production
- Wicking is easy
- Nice luxury high end look and quality for a good and fair price
CONS:
- DL drip tip is way to low...people with big lips will have to change the drip tip for a taller one.
- Tight Airflow Ring
- Top cap too tight is very tight,even if you lubricate the rings it is difficult to turn or remove.
- RDA is noisy and whistles when used with the DL cap,not a deal breaker for me but some might find it annoying.
Ok so half of the review is done,now i am only left with the review of the Pulse V2.
But i am so tired,need a small 5 second break and maybe have a cocktail
5.....
4....
3...
2..
1.
Now that i am fully recuperated it is time to tackle on the review of the Pulse V2.
Gotta be honest,never squonked before and since i like to do a proper review i had to watch some videos of the Pulse V2 so i would know how to put it all together and how to operate it.
Let us start with a nice picture so you can see the color schemes available for the Pulse V2:
SPECIFICATIONS:
Size: 82.3mm x 28.4mm x 54.7mm
Power Range: 5-95W
Single 21700/20700/18650 Battery
Power, TC, TCR, Bypass, VPC Modes
Waterproof Chip (Mod is not Waterproof)
Full Color Display
Can be Controlled w/ Vandy App
7ml Squonk Bottle Capacity
Bottom Filled Bottle
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-6.0V
Maximum Ouput Current Protecion: <34A
Coil resistance range: 0.05-3Ω
Contents pertaining the mod:
-1 x Pulse V2 Mod
-1 x 18650 Battery Adapter
-2 x 7ml Squonk Bottles
-1 x Type-C Cable
-1 x Metal tool to lift the tab of the filling cap
-1 x Instruction Manual
-1 x Proper User Guidance
-1 x Warranty Card
First impressions:
First of all i have to say i am not a fan of plastic mods,rubber on the outside is ok (loved my JACKAROO) so i was a bit hesitant of this mod.
But once i had it in my hand i was put the ease,even thou i am not a fan of the material i did like the way it was made.
Well rounded edges and it fit nicely in my hand so nothing to worry about,i was ready to get started.
Pulse V2 Button Combinations
-Turn the Pulse V2 On or Off: Press the fire button 5 times.
-Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
-Adjust settings in your current mode: Press the fire button 4 times.
-Enter the Menu: Hold the up and down adjustment buttons.
-Lock the mod: Hold the + adjustment button and fire button together.
-Flip the Screen: Hold the – adjustment button and fire button together.
-Stealth Mode: Hold both adjustment buttons and the fire button together.
My Requiem RDA was all primed and ready so it was time to try out the Pulse V2.
(atomizer size the Pulse V2 can fit up to a 26 mm atomizer without overhang)
I put in the 21700 Battery (Perhaps user error but i did scrape off some of the wrap on the battery)
Due to its bottom filling design the squonk bottle was filled with no hassle nor excess of liquid.
Screw in the cap and you ready to go.
First time squonker so i removed the top cap to see how much pumping i would need to keep the wick nice and wet.
Good feature (don't know if other squonk mods have it) is that once you release the pressure off the squonk bottle the excess of the e-liquid will go back in the bottle...awesome right?
I have used the Pulse V2 for about a week and haven't had any deal breaking issues.
It is a well designed and contructed squonking apparatus that does its job.
Was a bit worried about the panels but after a week of use i have to say i had no problems with them.
Magnets are strong and kept the panels in their place and well adjusted,no wobbly wibbly action with any of the 2 panels.
This device also has a TC mode but i haven't tested that since i have always been a vaper who just uses wattage mode.
So i can't really comment on the performance of TC mode.
Also this mod comes with a feature that lets you control certain aspects of your mod with an app called ''The Vandy App'' which you can find for Android and IPhone.
Since i don't own a smartphone i was unable to use this app but i have read a lot of other reviews and some people have used it with some conectivity problems.
If you are techy techy kinda person i guess this app is for you but for me personally it is just easier to use the mod itself to change for example the wattage i am using at the moment.
I was a bit afraid stepping my toes into the squonking scene since i never did it before but this mod just made my transition so much easier than i thought.
Pros:
-Water resistant and easy to clean
-You can swap the panels for customization
-Great build quality
-Nice compact size and lightweight
-Color and very bright screen
Cons:
- TC mode is not up to par
- Problems with app connectivity
(the above cons i have not experienced personally but i had heard from other reviewers,just thought i would post it as a disclaimer)
Would i recommend the Pulse V2?
Well for a newbie the answer would have to be most definitely,it was so easy to setup and get started with it that all my previous worries were just cast aside.
For a experienced squonker? well i can't really answer that question since this is the first time i tried a squonk mod.
If you are interested in purchasing this kit feel free to use this code supplied to me by the people of Sourcemore:
$50.88 - Vandy Vape PR SE Kit
Code: PRSEK
Thanks again to @Ema from Sourcemore for sending me this kit for the purpose of the review,much appreciated.
Ok so that is it folks,this was quite a lengthy review but i hope you enjoyed reading it.
Time for another review of a vaping apparatus,i like using the word ''apparatus'' it makes me seem smart,cultured and intelligent...sure hope so
I received this kit from Sourcemore for the purpose of this review.
This time i am stepping on to uncharted territory,i am about to use/review my first squonk apparatus.
Even thou i have never squonked before hence never pumped a bottle in a mod i did own a pair of Reebok sneakers when i was a kid so i am highly confident in my ''pumping'' skills.
Ok time to get serious.
All contents of the kit displayed so you can see what you get when you purchase the Vandy Vape PR SE Kit:
(2 items missing from the picture,little baggie with 2 coils are incliuded and a small tool to help you lift the tab on the bottom cap when you are going to refill the squonk bottle)
Since this kit comes with the Pulse V2 Mod and the Requiem RDA i am going to do two separate reviews of each item but in the same post,will start with the Requiem RDA.
The Requiem RDA is an RDA designed by a fellow Spaniard ''El Mono Vapeador'' famous reviewer in Youtube here in Spain and in some countries of South/Central America.
Time to get a look of said RDA with some of its specifications:
Full look at the deck of the Requiem RDA:
The Requiem RDA comes with 3 different caps so you can use it in MTL/RDL or DL mode:
Here you can see it in all its glory on top of the Vandy Vape Pulse V2:
Package Contents:
1x Requiem RDA
1x Coil Guide 2,5mm
2x Fused Clapton Coil 2,5mm 0,26Ω
3x Caps air configuration
1x Accessory bag
1x User Manual
First impressions:
Tiny looking RDA but cute,adding the beauty ring it does give it a nice look.
Keep in mind it is a 22mm atty and it goes up to 24mm if you add the beauty ring (you can see the beauty ring in the last photo)
Removing the cap reveals the base which features some good ol' chunky flat top screws which makes it a breeze when it comes to installing the coils.
Setup (coil and wicking):
Truth be told i am a klutz...yeah you read right,usually takes me a long time to get the coil put in but in this case it was an easy task.
Same goes for the wicking,with new RDA/RTA i have to rewick a couple of times (at least) until i get it right...not in this case.
The wicking was flawless so after doing some pumping i was ready to give this bad boy a try.
Not a MTL vaper but to do a proper review i had to give it a try.
So i loaded up the bottle with some nic salts and started vaping...wow,very good flavor and a nice,nice i mean NICE hit.
But since i don't enjoy MTL that much take off the MTL cap and put in the RTL cap,kept the same nic salts and started.
Now this right here hit the spot...actually liked it so much i had to change the bottle and put in my usual none nic salt e-liquid at 4.5mg nic.
Filled the bottle all the way to the top and used it all day without even looking at my other everyday use atomizer.
The very next day when it was time for my first daily espresso and checking emails i decided to give the DL cap a try.
While it did give the ''true'' DL experience i didn't really enjoy it as much as the RDL cap,what can i say? I am more of a middle type of guy.
Somewhere between MTL and DL is my butter zone,that is where i truly enjoy my vaping experience.
With all 3 caps (MTL,RDL and DL) you can slighly adjust the airflow by rotating the outer ring but truth be told you can't really adjust that much.
If you really want to change lets say from DL to a more restricted vape you are better off just putting on the RDL cap.
Overall impressions:
Well made atomizer with a lot of versatility since you can just switch caps whenever you feel like it and change to whatever vaping style you are in the mood for.
Even thou i have never squonked there was no leaking...just one time and that was user error since i over pumped.
If you are a squonker and you're looking for a RDA with versatility that lets you switch vaping styles this is the RDA for you but if you're looking for a dripper i would recommend you look elsewhere,this atty just doesn't seem designed for that purpose.
Word of advice,if you have big chunky and sexy lips like mine the drip tip on the cap for DL mode will not work for you.
This was a major con for me,tried using it and when i went to puff i basically covered the airflow holes with my lips.
Doesn't seem like a big deal,you can just use another drip tip that is a bit taller but aesthetically wise the atty will lose its unique look.
The drip tip that comes with the DL cap is just way,way...way to low.
PROS:
- Three airflow caps included (MTL,RDL,DL)
- Easy to build coil wise
- Good flavor and cloud production
- Wicking is easy
- Nice luxury high end look and quality for a good and fair price
CONS:
- DL drip tip is way to low...people with big lips will have to change the drip tip for a taller one.
- Tight Airflow Ring
- Top cap too tight is very tight,even if you lubricate the rings it is difficult to turn or remove.
- RDA is noisy and whistles when used with the DL cap,not a deal breaker for me but some might find it annoying.
Ok so half of the review is done,now i am only left with the review of the Pulse V2.
But i am so tired,need a small 5 second break and maybe have a cocktail
5.....
4....
3...
2..
1.
Now that i am fully recuperated it is time to tackle on the review of the Pulse V2.
Gotta be honest,never squonked before and since i like to do a proper review i had to watch some videos of the Pulse V2 so i would know how to put it all together and how to operate it.
Let us start with a nice picture so you can see the color schemes available for the Pulse V2:
SPECIFICATIONS:
Size: 82.3mm x 28.4mm x 54.7mm
Power Range: 5-95W
Single 21700/20700/18650 Battery
Power, TC, TCR, Bypass, VPC Modes
Waterproof Chip (Mod is not Waterproof)
Full Color Display
Can be Controlled w/ Vandy App
7ml Squonk Bottle Capacity
Bottom Filled Bottle
Operating Voltage: 3.2-4.2V
Output Voltage: 0.5-6.0V
Maximum Ouput Current Protecion: <34A
Coil resistance range: 0.05-3Ω
Contents pertaining the mod:
-1 x Pulse V2 Mod
-1 x 18650 Battery Adapter
-2 x 7ml Squonk Bottles
-1 x Type-C Cable
-1 x Metal tool to lift the tab of the filling cap
-1 x Instruction Manual
-1 x Proper User Guidance
-1 x Warranty Card
First impressions:
First of all i have to say i am not a fan of plastic mods,rubber on the outside is ok (loved my JACKAROO) so i was a bit hesitant of this mod.
But once i had it in my hand i was put the ease,even thou i am not a fan of the material i did like the way it was made.
Well rounded edges and it fit nicely in my hand so nothing to worry about,i was ready to get started.
Pulse V2 Button Combinations
-Turn the Pulse V2 On or Off: Press the fire button 5 times.
-Change Modes: Press the fire button 3 times and then use the adjustment buttons to select your mode. Press the fire button to confirm your mode.
-Adjust settings in your current mode: Press the fire button 4 times.
-Enter the Menu: Hold the up and down adjustment buttons.
-Lock the mod: Hold the + adjustment button and fire button together.
-Flip the Screen: Hold the – adjustment button and fire button together.
-Stealth Mode: Hold both adjustment buttons and the fire button together.
My Requiem RDA was all primed and ready so it was time to try out the Pulse V2.
(atomizer size the Pulse V2 can fit up to a 26 mm atomizer without overhang)
I put in the 21700 Battery (Perhaps user error but i did scrape off some of the wrap on the battery)
Due to its bottom filling design the squonk bottle was filled with no hassle nor excess of liquid.
Screw in the cap and you ready to go.
First time squonker so i removed the top cap to see how much pumping i would need to keep the wick nice and wet.
Good feature (don't know if other squonk mods have it) is that once you release the pressure off the squonk bottle the excess of the e-liquid will go back in the bottle...awesome right?
I have used the Pulse V2 for about a week and haven't had any deal breaking issues.
It is a well designed and contructed squonking apparatus that does its job.
Was a bit worried about the panels but after a week of use i have to say i had no problems with them.
Magnets are strong and kept the panels in their place and well adjusted,no wobbly wibbly action with any of the 2 panels.
This device also has a TC mode but i haven't tested that since i have always been a vaper who just uses wattage mode.
So i can't really comment on the performance of TC mode.
Also this mod comes with a feature that lets you control certain aspects of your mod with an app called ''The Vandy App'' which you can find for Android and IPhone.
Since i don't own a smartphone i was unable to use this app but i have read a lot of other reviews and some people have used it with some conectivity problems.
If you are techy techy kinda person i guess this app is for you but for me personally it is just easier to use the mod itself to change for example the wattage i am using at the moment.
I was a bit afraid stepping my toes into the squonking scene since i never did it before but this mod just made my transition so much easier than i thought.
Pros:
-Water resistant and easy to clean
-You can swap the panels for customization
-Great build quality
-Nice compact size and lightweight
-Color and very bright screen
Cons:
- TC mode is not up to par
- Problems with app connectivity
(the above cons i have not experienced personally but i had heard from other reviewers,just thought i would post it as a disclaimer)
Would i recommend the Pulse V2?
Well for a newbie the answer would have to be most definitely,it was so easy to setup and get started with it that all my previous worries were just cast aside.
For a experienced squonker? well i can't really answer that question since this is the first time i tried a squonk mod.
If you are interested in purchasing this kit feel free to use this code supplied to me by the people of Sourcemore:
$50.88 - Vandy Vape PR SE Kit
Code: PRSEK
Thanks again to @Ema from Sourcemore for sending me this kit for the purpose of the review,much appreciated.
Ok so that is it folks,this was quite a lengthy review but i hope you enjoyed reading it.
-
Locked
Closed/Sold Voopoo Drag X
- By jjcordone
- Member Classifieds and Swaps
- 7 Replies
Attachments
-
Locked
Lost Vape Thelema Quest 200W Kit Giveaway, 1 winner, ends on September 9th
- By Ema
- Sourcemore
- 0 Replies
Thelema Quest Kit is more affordable but still high-end level. It is a combination of a Thelema Quest 200W Box Mod and a 5ml UB Pro Pod Tank. The mod is powered by dual 18650 batteries to bring 200W max power. The transparent clear series makes it more modern and dazzling. Thelema Quest supports 5 vaping modes to help you explore more vaping fun: VPC/Bypass/Wattage/Voltage/Temperature Control(SS904/SS316/Ti/Ni) mode. There are also 3 firing modes to help you chase the best flavor: SOFT(output lower than standard output), NORM(standard output from the vaping mode that you choose), HARD(output higher than standard output). In addition, Thelema Quest Kit offers 3 user records, which will allow you to get the previous setting quickly. UB Pro Pod Tank is a sub ohm pod tank that maintains the fabulous flavor. Featuring fully adjustable airflow system and triple airflow channels, it will create the most balanced and flavorful clouds. UB Pro Pod Tank is compatible with UB Pro Coils.
Lost Vape Thelema Quest 200W Kit Giveaway, 1 winner, ends on September 9th
Enter here
-
Locked
New SMOK Arrivals - Morph Pod-80 Kit & Morph S Pod-80 Kit
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Today let's check out the Morph Pod-80 Kit and Morph S Pod 80 Kit. They were just launched by SMOK and look very similar to each other. Here we go!
As we said, the Morph Pod-80 and Morph S Pod-80 are almost the same in design, and their difference in size is also very slight. The only notable difference is the batteries they use, the Morph Pod-80 is powered by a built-in 3000mAh battery, while the Morph S Pod-80 requires an external 18650 battery. Both kits have an output range from 5-80W and can be charged via a Type-C USB port. Use-wise, they have a large side fire key, a clear OLED screen, and two up/down buttons. Near the top of mod there is an air switch and two air inlets, so the airflow can be precisely adjusted to achieve the desired flavor. Moreover, multiple safety protections are provided to avoid potential risks.
As for the Morph Pod 80 LP2 pod included in both kits, it has a capacity 5mLand its specially designed base can lock the e-liquid and the condensate generated during vaping. The top filling system makes refilling a breeze, no need to pull out the pod, which is convenient and prevents leakage. The LP2 pod is compatible with all LP2 coils, with purchase you will get a preinstalled LP2 Meshed 0.23ohm DL Coil and a spare LP2 Meshed 0.4ohm Coil. The added silicone rings on the bottom of the coils would fill the gap, effectively stemming the liquid leaking from the pod.
Check for more details here: SMOK Morph Pod-80 & Morph S Pod-80 Kit 80W
You may also like:
Geekvape M100 Kit (Aegis Mini 2) 100W with Zeus Nano 2 Tank
thelema quest mod cheap
As we said, the Morph Pod-80 and Morph S Pod-80 are almost the same in design, and their difference in size is also very slight. The only notable difference is the batteries they use, the Morph Pod-80 is powered by a built-in 3000mAh battery, while the Morph S Pod-80 requires an external 18650 battery. Both kits have an output range from 5-80W and can be charged via a Type-C USB port. Use-wise, they have a large side fire key, a clear OLED screen, and two up/down buttons. Near the top of mod there is an air switch and two air inlets, so the airflow can be precisely adjusted to achieve the desired flavor. Moreover, multiple safety protections are provided to avoid potential risks.
As for the Morph Pod 80 LP2 pod included in both kits, it has a capacity 5mLand its specially designed base can lock the e-liquid and the condensate generated during vaping. The top filling system makes refilling a breeze, no need to pull out the pod, which is convenient and prevents leakage. The LP2 pod is compatible with all LP2 coils, with purchase you will get a preinstalled LP2 Meshed 0.23ohm DL Coil and a spare LP2 Meshed 0.4ohm Coil. The added silicone rings on the bottom of the coils would fill the gap, effectively stemming the liquid leaking from the pod.
Check for more details here: SMOK Morph Pod-80 & Morph S Pod-80 Kit 80W
You may also like:
Geekvape M100 Kit (Aegis Mini 2) 100W with Zeus Nano 2 Tank
thelema quest mod cheap
-
Locked
Airis MEGA Disposable Vape Device 2000 Puffs Review
- By Verashu
- Vapesourcing
- 0 Replies
Airis MEGA Disposable Vape Device is the latest device.With more and more disposable cigarettes on the market today and more competition, how can you rise to the top of the pack and gain the popularity of smokers? It depends on how the whole thing goes.
The Airis Mega is a disposable vape device that is pre-filled with e-liquid. The device is powered by 1050 mAh built-in internal battery and holds up to 6mL of salt nicotine (5%) and is good to puff on for approximately 2000 puffs.
This compact device is ready to go straight out the box and is very pocket-friendly which makes it easy to carry. The Airis Mega also includes a mouthpiece cover to protect it from getting pocket lint or dirt that can get into the device.
You should try it,maybe it will become your new favorite,click best online vape store to buy.
Quick Link:Airis MEGA Disposable Vape Device 2000 Puffs 1050mAh
The Airis Mega is a disposable vape device that is pre-filled with e-liquid. The device is powered by 1050 mAh built-in internal battery and holds up to 6mL of salt nicotine (5%) and is good to puff on for approximately 2000 puffs.
This compact device is ready to go straight out the box and is very pocket-friendly which makes it easy to carry. The Airis Mega also includes a mouthpiece cover to protect it from getting pocket lint or dirt that can get into the device.
You should try it,maybe it will become your new favorite,click best online vape store to buy.
Quick Link:Airis MEGA Disposable Vape Device 2000 Puffs 1050mAh
-
Locked
Different Vape Tanks on Freemax Marvos S 80W Mod
- Freemax
- 0 Replies
Marvos S 80W Kit by Freemax is one new side-by-side mod/pod mod kit, powered by a single 18650 external battery. As one pod mod kit, with a 510 base, the Marvos DTL Pod Cartridge can be compatible with Marvos S 80W Kit, which can also be applied to all Marvos series products. As one box mod kit, Freemax Marvos S 80W Battery can support the other vape tanks because of the 510 connectors.
There is a picture about different vape tanks matching the Marvos S 80W Battery, so which match do you like best?
A. M Pro 2 Tank + Marvos S 80W Battery
B. Marvos DTL Pod Tank + Marvos S 80W Battery
C. M Pro Tank + Marvos S 80W Battery
D. Fireluke 3 Tank + Marvos S 80W Battery
One of the reviewers matches the Fireluke 22 Tank with Marvos S 80W Battery, which is also a good combination. So what’s your choice?
There is a picture about different vape tanks matching the Marvos S 80W Battery, so which match do you like best?
A. M Pro 2 Tank + Marvos S 80W Battery
B. Marvos DTL Pod Tank + Marvos S 80W Battery
C. M Pro Tank + Marvos S 80W Battery
D. Fireluke 3 Tank + Marvos S 80W Battery
One of the reviewers matches the Fireluke 22 Tank with Marvos S 80W Battery, which is also a good combination. So what’s your choice?
-
Locked
New Arrival! Uwell Caliburn A2 Pod Kit 520mAh
- By vapbig
- HealthCabin
- 0 Replies
Discover the Uwell Caliburn A2 15W Pod System, featuring an integrated 520mAh battery, 15W maximum output, and uses the new 0.9ohm Caliburn A2 Pods. Constructed from durable aluminum alloy, the chassis of the Caliburn A2 Pod System encases an integrated 520mAh rechargeable battery. Delivering up to 15W output, the constant voltage output is stable and produces delicious flavor from your favorite eJuice or nicotine salts. Outfitted with a LED battery life indicator light, the Caliburn A2 Pod System can be fired via button or draw-activated mechanisms, producing exquisite vapor.
Dimensions - 110mm by 21.3mm by 11.7mm
Integrated 520mAh Rechargeable Battery
Maximum Wattage Output: 15W
Aluminum-Alloy Chassis Construction
Intuitive Firing Button - Draw or Button Activated
LED Battery Life Indicator Light
2mL Pod Capacity
Top Fill System
0.9ohm UN2 Meshed Coil Pod
Pro-FOCS Technology
E-Liquid Viewing Window
...
Click here for more:
Caliburn A2 Kit: Uwell Caliburn A2 Kit | Healthcabin
Dimensions - 110mm by 21.3mm by 11.7mm
Integrated 520mAh Rechargeable Battery
Maximum Wattage Output: 15W
Aluminum-Alloy Chassis Construction
Intuitive Firing Button - Draw or Button Activated
LED Battery Life Indicator Light
2mL Pod Capacity
Top Fill System
0.9ohm UN2 Meshed Coil Pod
Pro-FOCS Technology
E-Liquid Viewing Window
...
Click here for more:
Caliburn A2 Kit: Uwell Caliburn A2 Kit | Healthcabin
-
Locked
Back again! I think? Looking for cheapest coils!
- By basmandje
- New Members: Introduce Yourself!
- 19 Replies
Hey guys!
I think I've been a member on this forum like a decade ago - but really have no idea with what username, email or whatever. So, a new account! Hi!
Switched to vaping in 2010 and a happy vaper since!
Used to vape the KR808D with those good old cotton atomizers, then in 2016 switched to eLeaf iCare and currently using the iCare2.
The coils for the iCare1 & 2 are very cheap (like $10 for 5 coils), but neither the iCare nor the coils are being sold anymore. I love my iCare - it's fantastic.
So, I'm forced to switch to a new brand/model.
Many of the current vapes come with a pod, which is rather expensive. I don't need that. Just want to replace my coil every few weeks.
Can any of you suggest a vape that:
- is small (like, pocket size - max 10cm high/long)
- doesn't produce huge clouds
- has cheap coils (or pods, if really no other option)
I don't need anything fancy.
Thank you in advance!
I think I've been a member on this forum like a decade ago - but really have no idea with what username, email or whatever. So, a new account! Hi!
Switched to vaping in 2010 and a happy vaper since!
Used to vape the KR808D with those good old cotton atomizers, then in 2016 switched to eLeaf iCare and currently using the iCare2.
The coils for the iCare1 & 2 are very cheap (like $10 for 5 coils), but neither the iCare nor the coils are being sold anymore.
I love my iCare - it's fantastic.So, I'm forced to switch to a new brand/model.
Many of the current vapes come with a pod, which is rather expensive. I don't need that. Just want to replace my coil every few weeks.
Can any of you suggest a vape that:
- is small (like, pocket size - max 10cm high/long)
- doesn't produce huge clouds
- has cheap coils (or pods, if really no other option)
I don't need anything fancy.
Thank you in advance!