Hey guys. Today let's check out the Morph Pod-80 Kit and Morph S Pod 80 Kit. They were just launched by SMOK and look very similar to each other. Here we go!

As we said, the Morph Pod-80 and Morph S Pod-80 are almost the same in design, and their difference in size is also very slight. The only notable difference is the batteries they use, the Morph Pod-80 is powered by a built-in 3000mAh battery, while the Morph S Pod-80 requires an external 18650 battery. Both kits have an output range from 5-80W and can be charged via a Type-C USB port. Use-wise, they have a large side fire key, a clear OLED screen, and two up/down buttons. Near the top of mod there is an air switch and two air inlets, so the airflow can be precisely adjusted to achieve the desired flavor. Moreover, multiple safety protections are provided to avoid potential risks.

As for the Morph Pod 80 LP2 pod included in both kits, it has a capacity 5mLand its specially designed base can lock the e-liquid and the condensate generated during vaping. The top filling system makes refilling a breeze, no need to pull out the pod, which is convenient and prevents leakage. The LP2 pod is compatible with all LP2 coils, with purchase you will get a preinstalled LP2 Meshed 0.23ohm DL Coil and a spare LP2 Meshed 0.4ohm Coil. The added silicone rings on the bottom of the coils would fill the gap, effectively stemming the liquid leaking from the pod.

Check for more details here: SMOK Morph Pod-80 & Morph S Pod-80 Kit 80W

You may also like:
Geekvape M100 Kit (Aegis Mini 2) 100W with Zeus Nano 2 Tank
thelema quest mod cheap

Airis MEGA Disposable Vape Device is the latest device.With more and more disposable cigarettes on the market today and more competition, how can you rise to the top of the pack and gain the popularity of smokers? It depends on how the whole thing goes.

The Airis Mega is a disposable vape device that is pre-filled with e-liquid. The device is powered by 1050 mAh built-in internal battery and holds up to 6mL of salt nicotine (5%) and is good to puff on for approximately 2000 puffs.

This compact device is ready to go straight out the box and is very pocket-friendly which makes it easy to carry. The Airis Mega also includes a mouthpiece cover to protect it from getting pocket lint or dirt that can get into the device.

You should try it,maybe it will become your new favorite,click best online vape store to buy.

Quick Link:Airis MEGA Disposable Vape Device 2000 Puffs 1050mAh

Marvos S 80W Kit by Freemax is one new side-by-side mod/pod mod kit, powered by a single 18650 external battery. As one pod mod kit, with a 510 base, the Marvos DTL Pod Cartridge can be compatible with Marvos S 80W Kit, which can also be applied to all Marvos series products. As one box mod kit, Freemax Marvos S 80W Battery can support the other vape tanks because of the 510 connectors.



There is a picture about different vape tanks matching the Marvos S 80W Battery, so which match do you like best?

A. M Pro 2 Tank + Marvos S 80W Battery
B. Marvos DTL Pod Tank + Marvos S 80W Battery
C. M Pro Tank + Marvos S 80W Battery
D. Fireluke 3 Tank + Marvos S 80W Battery

One of the reviewers matches the Fireluke 22 Tank with Marvos S 80W Battery, which is also a good combination. So what’s your choice?

Discover the Uwell Caliburn A2 15W Pod System, featuring an integrated 520mAh battery, 15W maximum output, and uses the new 0.9ohm Caliburn A2 Pods. Constructed from durable aluminum alloy, the chassis of the Caliburn A2 Pod System encases an integrated 520mAh rechargeable battery. Delivering up to 15W output, the constant voltage output is stable and produces delicious flavor from your favorite eJuice or nicotine salts. Outfitted with a LED battery life indicator light, the Caliburn A2 Pod System can be fired via button or draw-activated mechanisms, producing exquisite vapor.




Dimensions - 110mm by 21.3mm by 11.7mm
Integrated 520mAh Rechargeable Battery
Maximum Wattage Output: 15W
Aluminum-Alloy Chassis Construction
Intuitive Firing Button - Draw or Button Activated
LED Battery Life Indicator Light
2mL Pod Capacity
Top Fill System
0.9ohm UN2 Meshed Coil Pod
Pro-FOCS Technology
E-Liquid Viewing Window
...

Click here for more:

Caliburn A2 Kit: Uwell Caliburn A2 Kit | Healthcabin

I’m looking for sbody macro or vaporshark dna

Fingers crossed

New to vaping. Looking to get off cigarettes. And tired of $20 disposables every 2 days. Bought the voopoo drag x. Looking to go with the mouth to ling setup, using 1.0 ohm PnP coil rated for between 10-15 watts. My question is for the battery. Is there a specific battery outside of just 18650 that I should be looking for? Searched the internet. But couldn’t find any real useful info on this that made sense to me. The battery I have now is (hohmlife 4) what it says on battery - ..16ohms (lowest resistance), 31.5 amp max, 3015 mAh, 63w - 85w max

Hey guys!

I think I've been a member on this forum like a decade ago - but really have no idea with what username, email or whatever. So, a new account! Hi!

Switched to vaping in 2010 and a happy vaper since!
Used to vape the KR808D with those good old cotton atomizers, then in 2016 switched to eLeaf iCare and currently using the iCare2.

The coils for the iCare1 & 2 are very cheap (like $10 for 5 coils), but neither the iCare nor the coils are being sold anymore. I love my iCare - it's fantastic.

So, I'm forced to switch to a new brand/model.
Many of the current vapes come with a pod, which is rather expensive. I don't need that. Just want to replace my coil every few weeks.

Can any of you suggest a vape that:
- is small (like, pocket size - max 10cm high/long)
- doesn't produce huge clouds
- has cheap coils (or pods, if really no other option)

I don't need anything fancy.

Thank you in advance!

I received XROS MINI from vaporesso for the purpose of this review.
VAPORESSO XROS MINI colors:

- Black
- Space Grey
- Silver
- Grape Purple
- Orange Red
- Lime Green




Specifications:

- Dimensions: 98.9*23.4*13.5mm
- Pod Capacity: 2ml
- Pod Specification: 1.2ohm Pod (included), 0.8ohm Pod (not included, compatible)
- Output Wattage: 11W/16W
- Battery Capacity: 1000mAh
- Charging: Type-C, 5V/1A

In the box:

1* Vaporesso XROS Mini Battery
1* Vaporesso XROS Series 1.2ohm Pod 2ml
1* Type-C USB Cable
1* User Manual
1* Warranty Card






Vaporesso xros mini is nice and small pod device, since it is very small it is comfortable for using in my opinion. This device comes in package where you will receive one pod. Pod comes in few different colors and you have really nice choice. Build quality is good and in my opinion this version is better than previous one.





So with this device you will receive one pod with 2ml capacity which is really good for small device like this one. This device is compatible with pods from previous version which is really good. From the top side you can see the mouthpiece and mouthpiece is realyl comfortable for using. To fill the pod you need to take off the mouthpiece and when you take it off you can see the fill hole, you can fill it pretty much easy. From the bot of the pod you can see magnets and magnets are good, pod stays really nice in place on this device. For this device you can buy two different pods, you can buy 1.2ohm pod and 0.8ohm mesh pod, in the package you will receive 1.2ohm coil.








On the top of the device you can see slot for the pod and as I said pod stays really nice in place. Also you can see here airflow hole. I would like to say that everything here is done really good which is nice because condensation will not get inside the device. This device is without fire button, but it has draw automatic switch that works really well. This device has built in 1000mah battery which is better than on previous device. On the device you can see usb c port which is great and you can charge the battery pretty much fast. On the device you can also see led light which is battery indicator, we have green light here which means that battery is full, blue light that indicates medium battery and red light that shows that battery is empty. This device has constant working mode which is really good and it works at 11 or 16w depends on the coil you are using.













My thoughts:

So, vaporesso xros mini is in my opinion better device than previous one, this device is pretty small, comfortable for using and build quality of the device is good. This device comes in package where you will receive only one cartridge which is con in my opinion. Mouthpiece is comfortable for using and you can fill the pod really fast and easy. Pod also stays really nice in place and everything here is done really well. Capacity is 2ml which is really good for small device like this one. We don't have airflow adjustment here but airflow is great, with 1.2ohm coil you will get restrictive mtl draw. I didn't try 0.8ohm coil here. Draw activated switch works really well and it is responsive. Battery is also good, 1000mah battery. We have usb type c port and we can charge the battery really fast. In my opinion 1.2ohm coil works really good, I like pods from vaporesso because draw is really tight and good and flavor is also good. All in all, if you are searching to buy simple yet very good pod, I can suggest you this one.


Cons:

- Only one pod in the package


Pros:

- Small and comfortable
- Good mouthpiece
- Easy to fill
- Very good airflow
- Good flavor
- Slot is done well
- 1000mah battery
- Usb c port
- Good draw activated switch
- Battery indicator
- Compatible with pods from previous device

Thanks VAPORESSO
You can buy the device here: VAPORESSO XROS MINI

The Innokin COOLFIRE Z80 with Zenith II Kit



First - The Disclaimer: I am not a professional writer, nor professional reviewer of any products/product lines. Over the past few years - the only reviews or suggestions I have made were at the time which I believed I could provide information or add something to the conversation. What’s more important, anything I said was – or will say, is – “My” Personal Opinion . . .


BTW: As usual when testing any vaping equipment I use my ADV of Unflavored 50/50 24 NIC w/Koolada (sometimes 1-2 Drops of “Menthol Crystal Liquid) added to provide a "Cooling" Menthol effect. Also, I evaluated any equipment based on “My” experiences after using numerous different products for the past 9 years, first as a dual user then becoming a full-time vapor 2 years ago.


By now people know, I do not just jump on a product to just write a review without taking the time to actually test it fully – anywhere from a week, possibly 2 or 3 weeks or even more . . . So - For anyone interested in a more formal description and specifications about this product should check these links about the Innokin - COOLFIRE Z80 with Zenith II Kit:

CoolFire Z80 Zenith II - Vape Kit | INNOKIN®


This is not a “normal” review” as some, however if you want to know what it is to experience this product from a personal perspective – “MINE” - then we’re good.





Now back to the review . . .



First impression:


When I opened the box, I wasn’t sure I actually got an Innokin COOLFIRE . . . At first; as an owner of previous versions of Innokin’s Coolfire line of products - I noticed this Coolfire was different immediately. If it wasn’t for the “Innokin” & “Coolfire Z80” imprints on either side of the “metal” alloy banding I would not have known. That was until I took a much closer look and took my time checking everything out and putting this Coolfire Z80 thru its paces.



I found the Coolfire Z80 just slightly smaller in height visually and lighter in weight in feel then previous Coolfires. But every bit the same in quality and design as previous models.




The appearance of this Coolfire Z80 (Ash Grey) is very easy on the eye and quite elegant looking overall. With the contrasting slick alloy metal frame, glossy smooth screen/control area, and “suede” wrap of the Coolfire feels and fits very well in the palm of my hand – very comfortable. And top it off with a matching “Gun-Metal” tank (preferably the New Zenith II that comes with the kit). IMHO – it’s a Mod “dressed to the nines” even if you are not. More importantly, like many of the Innokin products you do not have to assume it is a quality product by just looking at it – because once you start using it you will notice it is quite solid and well made. Which brings me to the actual operation of the Coolfire Z80 . . .



Now with that out of the way, even if you have used any version of a Coolfire before, the Coolfire Z80 is a different mod and a little more than you might expect with the 4th Generation Vaping Technology incorporated to the function of the MOD (see Coolfire Z80 details & spec’s). The same can be said about the New Zenith II tank with its improvements (which will be discussed later in the review). This can be a very good or bad thing depending on your perspective and what you want from a MOD and/or Tank.

Now, as for an actual test using the COOLFIRE Z80 with the new Zenith II and putting them thru their paces . . .

Really like that the Coolfire Z80 uses a replaceable external 18650 Battery. I found the Coolfire Z80 quite easy to use, whether or not you have Coolfires previously; the fire button, + up - down controls and usb are locate on the LC Screen and are very accessible. Even the Menu options are bright and clear when outside in direct sunlight. Everything you would expect from a quality Innokin product.

Personally I was determined to “Test” the Coolfire Z80 as it was sent, using the 4th Generation Vaping Technology at 80Mz & 10 Watts and the Zenith II 0.8 ohm mesh coil preinstalled.

Filled the new Zenith II with my ADV and set off for a new experience. YEA – Right . . . Let’s just say within 3 hours, the “Fo” was switched to “Power”. Let me explain . . . When the “Fo” Technology is activated I feel a slight “Current”/”Vibration” running through the vapor when inhaling – it’s unsettling to me to say the least - just as it was the first time I tried using the “Fo” mode in the Innokin Sensis. Now don’t get me wrong, I am sure for some people they may not notice, but I did. The other thing is I really don’t NEED to use the “Fo” mode – I neither use a strong e-liquid flavor that would “junk-up” a coil or to use it to possibly enhance the flavor of an e-liquid. NOR – To extend the life of the Z-Coils. AS almost everyone knows by now is that the Innokin coils I use, including the Z coils & Sceptre coils already last "Me" anywhere from 60-90 + days each (approximately 3 months before having to change out). Also I have an Ultra Sonic Cleaner that I use when NEEDED to refresh coils to reuse later. The new "Fo" technology (including the Coil + & Refresh options), while may be a great option for those who use flavored E-Liquid, especially one that “gunk’s-up” coils, in reality does nothing to improve the coils/vapor and my vaping experience in the long run

However, once I got the Coolfire Z80 set to wattage, I kept using the 0.8 oHm mesh coil in the Zenith II and still am (been approximately 2 weeks now – amazing isn’t it). Also, I will say this, I noticed that when using the 0.8 oHm mesh coil there is a difference in both vapor “taste” and TH. In addition, it seems I can even vape at a lower wattage (7 w) or higher (15 w) without the unflavored NIC e-liquid I use tasting like old burnt tobacco as it has in the past when using a sub-ohm coils. Even played around with increasing the wattage up to 20w, with no major problems – just not for me. However, will I continue using the 0.8 oHm coils? Maybe/Maybe not, if I had the 0.8 oHm mesh coils - I might use them, just not going to make a special purchase of them when I mainly use 1.2/1.6 oHm Z-coils. AND – As for the 0.3 oHm coils – tried did not like – NOPE – NA DA – NOT HAPPENING.


Which brings me to the New Zenith II tank . . .


What a difference and pleasure a few adjusts/improvements make to a product you already enjoy using. The Zenith II has a few very noticeable changes to its appearance and function, while maintaining what I (and many others) found positive with its original design. While the differences might be somewhat minor to some, IMHO - the "improvements" do make a noticeable change of refinements for the better - at least for "Me" as a MTL "Tootle Puffer"



So what are the differences that you might not notice at first:



Talk about an improvement, the not so slight modifications made to the Zenith II really enhance the MTL "Vaping" experience for “Me” . . . Cool and "Refreshing" - especially using 1.2 & 1.6 oHm Z-coils at a lower wattage 10 Watts . . . Matter of fact, I haven't put the Zenith II down since the day I got it set up and running.


The results overall:

Although there have been a few times I have not “liked”, or actually find a product that I would use, or even something does not meet my expectations – the Innokin Coolfire Z80 & Zenith II is not one of them.


Without a doubt Innokin is producing more - WINNERS - The Coolfire Z80 and Zenith II get’s Uncle’s stamp of approval and is another Innokin product that I whole heartily recommend to all Vapors alike . . .



( Okay Now – Before anyone makes any comments, Once again, it will sometimes take “Me” quite awhile to write up and edit a review; so if “You” find any mistakes in grammar, punctuation, or spelling – get over it, I’m not a professional writer . . . Just Sayin’ . . . }

The Innokin COOLFIRE Z80 with Zenith II Kit



First - The Disclaimer: I am not a professional writer, nor professional reviewer of any products/product lines. Over the past few years - the only reviews or suggestions I have made were at the time which I believed I could provide information or add something to the conversation. What’s more important, anything I said was – or will say, is – “My” Personal Opinion . . .


BTW: As usual when testing any vaping equipment I use my ADV of Unflavored 50/50 24 NIC w/Koolada (sometimes 1-2 Drops of “Menthol Crystal Liquid) added to provide a "Cooling" Menthol effect. Also, I evaluated any equipment based on “My” experiences after using numerous different products for the past 9 years, first as a dual user then becoming a full-time vapor 2 years ago.


By now people know, I do not just jump on a product to just write a review without taking the time to actually test it fully – anywhere from a week, possibly 2 or 3 weeks or even more . . . So - For anyone interested in a more formal description and specifications about this product should check these links about the Innokin - COOLFIRE Z80 with Zenith II Kit:

CoolFire Z80 Zenith II - Vape Kit | INNOKIN®


This is not a “normal” review” as some, however if you want to know what it is to experience this product from a personal perspective – “MINE” - then we’re good.





Now back to the review . . .



First impression:


When I opened the box, I wasn’t sure I actually got an Innokin COOLFIRE . . . At first; as an owner of previous versions of Innokin’s Coolfire line of products - I noticed this Coolfire was different immediately. If it wasn’t for the “Innokin” & “Coolfire Z80” imprints on either side of the “metal” alloy banding I would not have known. That was until I took a much closer look and took my time checking everything out and putting this Coolfire Z80 thru its paces.



I found the Coolfire Z80 just slightly smaller in height visually and lighter in weight in feel then previous Coolfires. But every bit the same in quality and design as previous models.




The appearance of this Coolfire Z80 (Ash Grey) is very easy on the eye and quite elegant looking overall. With the contrasting slick alloy metal frame, glossy smooth screen/control area, and “suede” wrap of the Coolfire feels and fits very well in the palm of my hand – very comfortable. And top it off with a matching “Gun-Metal” tank (preferably the New Zenith II that comes with the kit). IMHO – it’s a Mod “dressed to the nines” even if you are not. More importantly, like many of the Innokin products you do not have to assume it is a quality product by just looking at it – because once you start using it you will notice it is quite solid and well made. Which brings me to the actual operation of the Coolfire Z80 . . .



Now with that out of the way, even if you have used any version of a Coolfire before, the Coolfire Z80 is a different mod and a little more than you might expect with the 4th Generation Vaping Technology incorporated to the function of the MOD (see Coolfire Z80 details & spec’s). The same can be said about the New Zenith II tank with its improvements (which will be discussed later in the review). This can be a very good or bad thing depending on your perspective and what you want from a MOD and/or Tank.

Now, as for an actual test using the COOLFIRE Z80 with the new Zenith II and putting them thru their paces . . .

Really like that the Coolfire Z80 uses a replaceable external 18650 Battery. I found the Coolfire Z80 quite easy to use, whether or not you have Coolfires previously; the fire button, + up - down controls and usb are locate on the LC Screen and are very accessible. Even the Menu options are bright and clear when outside in direct sunlight. Everything you would expect from a quality Innokin product.

Personally I was determined to “Test” the Coolfire Z80 as it was sent, using the 4th Generation Vaping Technology at 80Mz & 10 Watts and the Zenith II 0.8 ohm mesh coil preinstalled.

Filled the new Zenith II with my ADV and set off for a new experience. YEA – Right . . . Let’s just say within 3 hours, the “Fo” was switched to “Power”. Let me explain . . . When the “Fo” Technology is activated I feel a slight “Current”/”Vibration” running through the vapor when inhaling – it’s unsettling to me to say the least - just as it was the first time I tried using the “Fo” mode in the Innokin Sensis. Now don’t get me wrong, I am sure for some people they may not notice, but I did. The other thing is I really don’t NEED to use the “Fo” mode – I neither use a strong e-liquid flavor that would “junk-up” a coil or to use it to possibly enhance the flavor of an e-liquid. NOR – To extend the life of the Z-Coils. AS almost everyone knows by now is that the Innokin coils I use, including the Z coils & Sceptre coils already last "Me" anywhere from 60-90 + days each (approximately 3 months before having to change out). Also I have an Ultra Sonic Cleaner that I use when NEEDED to refresh coils to reuse later. The new "Fo" technology (including the Coil + & Refresh options), while may be a great option for those who use flavored E-Liquid, especially one that “gunk’s-up” coils, in reality does nothing to improve the coils/vapor and my vaping experience in the long run

However, once I got the Coolfire Z80 set to wattage, I kept using the 0.8 oHm mesh coil in the Zenith II and still am (been approximately 2 weeks now – amazing isn’t it). Also, I will say this, I noticed that when using the 0.8 oHm mesh coil there is a difference in both vapor “taste” and TH. In addition, it seems I can even vape at a lower wattage (7 w) or higher (15 w) without the unflavored NIC e-liquid I use tasting like old burnt tobacco as it has in the past when using a sub-ohm coils. Even played around with increasing the wattage up to 20w, with no major problems – just not for me. However, will I continue using the 0.8 oHm coils? Maybe/Maybe not, if I had the 0.8 oHm mesh coils - I might use them, just not going to make a special purchase of them when I mainly use 1.2/1.6 oHm Z-coils. AND – As for the 0.3 oHm coils – tried did not like – NOPE – NA DA – NOT HAPPENING.


Which brings me to the New Zenith II tank . . .


What a difference and pleasure a few adjusts/improvements make to a product you already enjoy using. The Zenith II has a few very noticeable changes to its appearance and function, while maintaining what I (and many others) found positive with its original design. While the differences might be somewhat minor to some, IMHO - the "improvements" do make a noticeable change of refinements for the better - at least for "Me" as a MTL "Tootle Puffer"



So what are the differences that you might not notice at first:



Talk about an improvement, the not so slight modifications made to the Zenith II really enhance the MTL "Vaping" experience for “Me” . . . Cool and "Refreshing" - especially using 1.2 & 1.6 oHm Z-coils at a lower wattage 10 Watts . . . Matter of fact, I haven't put the Zenith II down since the day I got it set up and running.


The results overall:

Although there have been a few times I have not “liked”, or actually find a product that I would use, or even something does not meet my expectations – the Innokin Coolfire Z80 & Zenith II is not one of them.


Without a doubt Innokin is producing more - WINNERS - The Coolfire Z80 and Zenith II get’s Uncle’s stamp of approval and is another Innokin product that I whole heartily recommend to all Vapors alike . . .



( Okay Now – Before anyone makes any comments, Once again, it will sometimes take “Me” quite awhile to write up and edit a review; so if “You” find any mistakes in grammar, punctuation, or spelling – get over it, I’m not a professional writer . . . Just Sayin’ . . . }



.

"With the goal of creating the world’s largest collection of successful vape stories, two leading consumer advocacy groups have launched the RightToVape.org site.

Already boasting nearly 14,000 testimonials, the site demonstrates growing anger from across the globe that evidence is being ignored and many people’s right to choose safer alternatives is being denied.

Now live, www.righttovape.org is a joint venture between the US-based Consumer Advocates for Smoke-free Alternatives Association (CASAA) and the Coalition of Asia Pacific Tobacco Harm Reduction Advocates (CAPHRA).

“This site will not only be a uniquely dedicated resource, but a powerful response to those who want to restrict access to vaping and other smoke-free products........."

Vaping: Vast Database Reveals The Truth! | Scoop News

Hi, so I have purchased the Gen S.
Batteries, as I'm sure some people may agree are a little confusing, anywho- I took a trip into my local vape store as I thought that may be my safest option. I was sold AWT IMR 3500mAh 35A 3.7V, will these be safe to use in the Gen S?
I have attempted some of my own research, but thought guidance here may be useful!

Thanks!

Hi ECF members, In this review I take a look at the Captain Link 100w Mod from IJoy. The IJOY Captain Link Mod was supplied for the purpose of this review by Sourcemore.

IJOY Captain Link Mod 100W Box Mod single 18650/21700




Introduction

To my recollection it was IJoy who first started regularly releasing 20700 swiftly followed by 21700 devices back at a time when batteries were included because the likelihood was it would be the first device someone had bought accommodating such batteries but it wasn't long before the 21700 became as popular as the 18650 (and preferred by most)!

The IJoy Captain Link Mod takes the successful "Captain" title probably for no other reason than it will increase sales which is something which seems to be a regular ploy by most manufacturers of late either just cashing in on a successful name or maybe simply a fact they are struggling for original names!

The Captain Link Mod is an ergonomic single 100w device which offers Variable Wattage and full TC suite and allows the display colour to be customised to be one of 4 colours. The IJoy Captain Mod is quite large compared to the more compact single 21700 devices of late but is aesthetically pleasing and features an old school bottom battery plate and 25mm 510 plate up top, let's crack on and check out the Captain Link Mod from IJoy!

_________________________________________________________________________



In The Box





Contents:

1* IJOY CAPTAIN LINK MOD
1* 18650 Battery Adaptor
1* Type-C Cable
1* Manual
1* Warranty Card

_________________________________________________________________________



Aesthetics and Ergonomics

The Captain Link Mod came in cardboard box packaging with outer cardboard sleeve, we have a raised picture of the device in the chosen colour on the front and Specs, contents etc on the reverse. I received the Blue version which I picked because it's such a nice shade, the options are Black, Stainless Steel, Blue, Red or Green.

The main chassis is Zinc Alloy and Black in colour then the chosen colour refers to the rear bracket and matching buttons. The curved bracket employs an "X" design on the spine area giving 4 separate sections which has substantial Silicone pieces with aggressive grooved texture for grip. Simply because this is a single battery device, curvy and those added Silicone grips makes this a delight to carry about and fire despite being large compared to most single 21700 devices released of late!


Comparison between Foxy One and OBS Engine!




We have a slightly curved face with Zinc Alloy square protruding buttons matching the colour of the bracket. The square fire button positioned towards the top isn't the largest but protrudes nicely, towards the bottom we have the matching smaller square navigational buttons lined up vertically which is followed by the Type C USB port, the screen is positioned between the fire and lower buttons!

On the chassis one side towards the bottom we have "Captain LINK" printed with the "Captain" in a nice signature style font. At the base we have an old school style battery plate with fold out lever then moving up top we have a 25mm Stainless Steel 510 plate that's screwed on to the main chassis and has etched safety stamps, the 510 is Gold plated and spring loaded. The device is a looker in my opinion and solidly built but when shaking vigorously I did get the slightest of fire button rattle which although pointing out really isn't going to occur during normal use so not worth dwelling on!




_________________________________________________________________________



Captain Link Mod Specs and Features:

Size: 97* 40* 30mm
Material: Zinc Alloy & Silicone & PCTG
Battery: Single 18650 / 21700 battery(not included)
Output: 5-100W
Output current: 0-45A
Output voltage: 0-8V
Screen: 0.96 inch TFT display
Charging: Type-C 5V/1.5A
Resistance range: 0.05-3ohm
Temperature range: 300-600℉
Mode: Power/ TC/ TCR
Newly upgraded Univ S 2.0 chipset
Thread: 510
Colour: Black, SS, Blue, Red, Green






_________________________________________________________________________



Installing The battery

The IJoy Captain Link will accommodate either a 20700, 21700 or with the included adaptor an 18650 which gets fitted via the bottom of the device. We have an old school screw in battery plate with fold out lever which is sturdy and screws in and out of position smoothly, when the lever is folded outwards to use for turning 3 good sized venting holes are revealed.

Orientation is marked vibrantly at the bottom of the tube and in White on the underside of the plate and once secured we get absolutely no battery rattle (I tried both a 21700 and 18650 battery)! I do wish the battery fit was a little bit more snug though as the tube is far wider than it needs to be so you get a lot of battery movement from side to side until the plate is secured, for this reason I really wish the 18650 adaptor was the usual full sleeve version rather than the little stumpy one that just fits over the end of the battery!




_________________________________________________________________________



The Display

The display is very bright and colourful with the options to both change the colour of the main accents and alter brightness!

Central top we have the battery status bar then underneath a circular colourful design. Within this circular design we have the mode then underneath either the wattage or temperature depending which mode you are in! Below the wattage or temperature but still within the circular design we have vape duration left and the 3 digit puff counter to the right.

Below the central circular design at the bottom of the display we first have the resistance followed below with the voltage which will be wattage instead if using TC mode!




_________________________________________________________________________



Navigating The Captain Link Mod

The Captain Link is the usual 5 clicks of the fire button to turn on and off and once on pressing both navigational buttons together locks the whole device so it also will not fire (don't like this)! Pressing either fire and up or fire and down together brings up the brightness bar which can then be altered up or down from 0 to 100% using the navigational buttons, either pressing fire or no activity for 2 seconds takes you back to the main working screen!

3 quick clicks of the fire button highlights the mode which can be changed by clicking the navigational buttons or pressing fire will take you to an item on the screen that can be altered allowing puffs to be reset (although they only go to 999 before resetting anyway) or when in TC locking resistance and setting wattage.

The modes are Power (variable wattage), Theme (allows the main accents on the screen to be either Red, Yellow, Blue or Green), Memory (can set 4 different profiles), TC-TCR, Ti, SS and finally Ni.

When altering wattage it adjusts from 5w to 100w in point 1 increments with single presses and 1w increments with a button held down, it doesn't round robin. When in TC the temperature unit round robins between Celsius and Fahrenheit, Celsius adjusts in 5 degree increments from 150 degrees to 300 degrees and Fahrenheit adjusts in 10 degree increments from 300 to 600 degrees!

The device is simple to navigate which is a good job really as the manual comes in about a million languages but it doesn't matter what your native tongue is because it's useless and doesn't even tell you how to change modes, in fact the only thing it tells you about the operation of the device is that 5 clicks is on and off and that's it, do us a favour IJoy save some trees and don't bother! Also something I find quite funny but again is not good enough is when in memory mode the display say's "Momery"!!!!!!!!!




_________________________________________________________________________



Indications and Protections:

Low power protection
Short circuit protection
Atomizer indications




_________________________________________________________________________



Charging

As usual I would encourage to charge externally but if you do need to charge in the device we have a type C USB connection and 1.5A charge rate! While charging a charging progress bar is displayed within a circular design, the Captain Link Mod supports upgrades but not pass through vaping!

_________________________________________________________________________



My Thoughts!

Despite the Captain Link Mod being larger and heavier than other recent single 21700 devices I have reviewed I sill found it to feel great in the hand and love the Silicone grips which are substantial! I really like the colourful bright display and how easy it is to navigate, I also like how both the brightness and colour accents can be adjusted.

However I don't like how unnecessarily large the battery compartment is and the manual is garbage! I also wish this would reduce top wattage to a realistic 80w for an 18650 battery. Another big con is that you can't just lock the navigational buttons but only the whole device which i can do anyway with 5 clicks of the fire button and if there is a way that I just haven't found then the manual isn't going to help me! The only other petty con is the wattage doesn't round robin although temperature does!

The buttons have quite some travel but give a definite yet quite quiet click which I like, when firing there is no delay and I had no performance issues whatsoever although if you use TC you will need to do further research. The puff counter doesn't reset when swapping out batteries and it also remembers your last setting which I like, although we have a puff counter which can be reset manually it is only 3 digits so after 999 it will automatically reset! One last major pro is the battery plate which is quality with a sturdy lever which reveals venting when folded out and the threading is really nice!

With all the cons I have I still found I really am liking this mod possibly for it's aesthetic looks, ergonomic feel and it's been performing like a trooper!

If you need to charge in the device we have a Type C USB connection and upgrades are supported but pass through vaping isn't accommodated. Finally up top we can fit 27mm atomisers with no overhang which is above par for a single battery device!




_________________________________________________________________________



Likes

Solid, well made device
Ergonomic and aesthetically pleasing
5 Colour options
Silicone spine grips
21700, 20700 or 18650 battery
Full TC Suite (not tested)
Resistance can be locked and wattage set in TC
Remembers last setting when changing battery
Puff counter with manual reset
Bright, colourful display
Displays' brightness can be adjusted and colour customised
Buttons give nice satisfying click
Fires without delay and performed like a trooper
Type C USB and upgrades supported
Really nice battery plate with fold out lever, venting and the threading is really smooth
Fit 27mm atomizers without overhang


Cons

Larger than most recent single 21700 devices
Unnecessary over large battery compartment
Stumpy 18650 adaptor (full sleeve style would suit the overlarge compartment better)
Can't just lock navigational buttons
Wish top wattage was 80w for 18650 battery
Wattage doesn't round robin
Pass through vaping not supported

I would once again like to thank Sourcemore for supplying the IJOY Captain Link Mod for the purpose of this review, thanks for reading and stay safe!

IJOY Captain Link Mod 100W Box Mod single 18650/21700


$24.79 - IJOY Captain Link Mod
Code: LINK

Disclaimer: I am not affiliated with Sourcemore or benefit in any way from the use of the above code but was asked if I would include it in my content!

_________________________________________________________________________

Hi, so I have purchased the Gen S.
Batteries, as I'm sure people may agree are a little confusing, anywho- I took a trip into my local vape store as I thought that may be my safest option. I was sold AWT IMR 3500mAh 35A 3.7V, will these be safe to use in the Gen S?
I have attempted some of my own research, but thought guidance here may be useful!

Thanks!

Hello

I just got a bunch of new VTC5A Batteries, but they look a little bit different to what I am used to. There is something like a big insulator ring on top. Have ever seen something similar before?

Exvape Expromizer V1.4 RTA Limited Edition, the upgrade version of the Expromizer V1 RTA, is constructed of Stainless Steel / PC / POM with 23mm diameter. Expromizer V1.4 RTA Limited Edition has easy to wind single-coil deck. Exvape Expromizer V1.4 RTA included the tank expansion kit, three optional drip tips and 4 different tank variants to offer 8 different tank combinations. Expromizer V1.4 MTL RTA applied top flling design. Expromizer V1.4 has 6 airflow pins to adjust airflow more precisely for perfect draw and flavor. Its top cap has a bayonet lock. Both the top cap and the airflow ring have knurling to provide a good grip.


Parameter:
Diameter: 23mm
Material: Stainless Steel / PC / POM
Capacity: 2ml / 4ml / 6ml
Thread: 510

Features:
Tank vaporizer in limited edition
Three drip tips included
4 different tank variants
Easy to wind single-coil deck
Adjustable 510 pin screw
Top Filling with bayonet lock
Precise bottom airflow (including AFC Pins)
MTL: Designed for pulling from the mouth to the lungs

Packages:
1* Expromizer V1.4 MTL RTA
1* stainless steel tank 4ml
1* stainless steel tank 2ml
1* PC Tank 4ml
1* expansion tank
2* Expansion Chimney
1* Drip Tip PC
1* Drip Tip Black (POM)
6* Airflow Pins
1* O-Ring Kit
1* Coil + Wadding
2* Screwdriver (Cross / slot)

Advken OWL Pro Sub Ohm Tank is absolutely resupplied by its upgraded 5ml vape juice capacity that is based on its top filling design, matching your mood of all-day vaping enough and further preventing leakage. OWL Pro continues the premium texture of stainless steel and ergonomic rounded design that comforts your fingertips, and adapts an 810 replaceable drip tip. With its sleek and ergonomic mouthpiece to the bottom, which has an innate appearance to satisfy you. It is compatible with two types of coils of 0.2ohm and 0.4ohm. They will let you feel the massive cloud with incredible flavors. Once in the palm of your hand, you will immediately love it and can not take your eyes off it.


Parameter:
Size: 29* 53 mm
Material: Stainless Stell
Capacity: 5ml
Resistance: 0.2Ω Mesh Coil(70-80W)
0.4Ω Mesh Coil(50-60W)

Features:
0.2Ω & 0.4Ω Mesh Coil
Leakproof Top Airflow System
810 Replaceable Drip Tip
Upgraded 5ml Vape Juice Capacity
Texture Of Stainless Steel

With its quality and elegant appearance, Rincoe Jellybox Nano Pod Mod Kit maintains a compact design, standing 54mm tall, 68.2mm wide, and a mere 19mm in depth. It has a range of coil options between 0.3ohm and 3ohm, and has two types of coils to choose from: Mesh 1.0ohm Coil and Mesh 0.5 Ohm Coil. It is capable of outputting 30 watts and 3.2 to 4.2 of voltage input from the tiny frame, a feat that exceeds the market. Though compact, the device maintains its portable design despite the fact that it houses a 1000mAh rechargeable battery that comes integrated, and you can expect a full day of vaping pleasure when using a Type-C USB port, which allows a 5V/1A charging specification. In addition, it is available for holding up to 2.8ml of E-liquid, you can refill all sorts of different juices you want, satisfying both nic salt e-liquid and freebase e-liquid. What's more, it is constructed with a zinc alloy body and satin material finish and a PEPG tank section for durable construction. Whether you know of it, you will finally be thrilled about it.




Features:
1. Capable Of Outputting 30 Watts
2. 3.2 To 4.2 of Voltage Input
3. 1500mAh Built-in Battery
4. Type-C Fast Charging
5. Use Type-C USB Port
6. Allow A 5V/1A Charging Specification
7. 2.8ml E-liquid Capacity
8. Zinc Alloy Body And A PEPG Tank Section
...

Click here for more:

Jellybox Nano Kit: Rincoe Jellybox Nano Kit

Shop Uwell Caliburn AK2 15W Pod System, featuring an integrated 520mAh rechargeable battery, 15W maximum output, and utilizes 2mL 0.9ohm UN2 Meshed Pods. Constructed from durable aluminum alloy, the chassis of the Caliburn AK2 Pod System possesses a thin and portable profile that is perfect for those that are on-the-go, and are looking for a dependable vaping system.

Features

• 2ml Vape Juice Capacity
• Houses 520mAh Battery
• About 600 Puffs Per Device
• Compatible With 0.9ohm UN2 Meshed-H Coil
• Distinguishably Zesty
• Ergonomic Mouthpiece
• Biscuity Appearance

Utilizing a fast Type-C charging system, the Caliburn A2 Pod System for cheap sale can deliver vaping in as little as 35 minutes to charge the battery up to 95%. Equipped with a 2mL refillable pod, the Caliburn AK2 utilizes 0.9ohm UN2 Meshed-H Coil Pods that deliver delicious flavor and vapor.

Welcome to vape shop online to learn more details.

Quick Link:Uwell Caliburn AK2 Pod System Kit

Freemax Twister 30W Kit and Marvos T 80W Kit are pen-style vape kits. Marvos T 80W is an all-in-one vape pen style pod mod kit, consisting of a Marvos DTL Pod and one Marvos T 3000mAh Internal Battery Mod. However, Twister 30W Kit is a 22mm diameter vape pen starter kit with Fireluke 22 Tank and Twister 30W VW mod.

Moreover, MS Mesh Coil Series for Marvos Series Kits are inspired from Freemax world-known Fireluke Series. Marvos T 80W Kit is designed for beginners who want a quick start in DTL vaping, and Freemax Twister 30W Kit is designed for different DTL, RDL and MTL vaping needs. As for you, which do you prefer, Marvos T 80W or Twister 30W?

Hey guys. Today let's look at the Kylin M Pro RTA by Vandy Vape which is the improved version of the original Kylin M. If you like the Kylin M, don't miss out on this update. Here we go!

The Kylin M Pro and Kylin M are almost the same volumes. However, the new version greatly increases the e-liquid capacity to 8ml by engraving the CNC inside the hardware. To refill the tank, just rotate the top cap 90 degrees and take it off, then you will see the filling port.

Besides, the M Pro keeps the top airflow intake design to prevent leaking and comes with long lifespan mesh coils. With purchase you will get two A1 M coils one is 0.15ohm and the other is 0.2ohm, but you can also use other M Mesh coils by Vandy Vape. At last, the new version is available in 6 colors, so there is always one for you.

Buy it here: Vandy Vape Kylin M Pro RTA 8ml

You may also like:
big boy glow review
geekvape m100 kit price

Hi Guys,

Glad to join the community and hope perhaps to sort out some problems. How much money we save by vaping instead of smoking! I had a few problems though which I hope some of you may be able to sort out for me.

I’ve has three Eleaf Istick 40s and, recently, an Istick 30. They’re good when they’re going, but they often quit firing and I can’t figure out why or how to get them to reliably fire. Has anyone else had this problem. If so, we’re they able to find an answer.

Should I change to another make of mod?

Looking forward to hearing from happy vapers,

Best wishes to all,

Arthur Leat

DOVPO Blotto Single Coil RTA

Blotto Single Coil RTA is designed by Dovpo & Vaping Bogan. It features the original honeycomb air ring to provide smooth adjustment. It also comes with honeycomb holes inside the posts to provide the advanced air diffusion solution. The cotton well of Blotto Single RTA has improved to the perfect size for single coil cottons, and it is also easy to set for the new RBA vaper. Utilizing the stainless steel to seal the honey-combed style posts, Blotto Single Coil RTA is more tolerable to the heat. Top refilling design not only avoids the leaking risks, but also makes the refilling easy. Blotto Single Coil RTA has two e-juice capacity: 2.8ml with straight glass, 5ml with bubble glass. It will satisfy all Blotto lovers' needs, just get Blotto Single Coil RTA to enjoy great vaping!


Details:

1. Design for single coil direct lung vaping
2. Original honeycomb air flow, smooth to adjust
3. Comes with honeycomb holes inside the posts
4. Improved cotton well
5. Elevated metal backed airflow posts
6. Top refilling design
7. Strengthened AFC ring & base
8. Dual diffusion airflow system






Lost Vape Thelema Quest 200W Kit

Thelema Quest Kit is more affordable but still high-end level. It is a combination of a Thelema Quest 200W Box Mod and a 5ml UB Pro Pod Tank. The mod is powered by dual 18650 batteries to bring 200W max power. The transparent clear series makes it more modern and dazzling. Thelema Quest supports 5 vaping modes to help you explore more vaping fun: VPC/Bypass/Wattage/Voltage/Temperature Control(SS904/SS316/Ti/Ni) mode. There are also 3 firing modes to help you chase the best flavor: SOFT(output lower than standard output), NORM(standard output from the vaping mode that you choose), HARD(output higher than standard output). In addition, Thelema Quest Kit offers 3 user records, which will allow you to get the previous setting quickly. UB Pro Pod Tank is a sub ohm pod tank that maintains the fabulous flavor. Featuring fully adjustable airflow system and triple airflow channels, it will create the most balanced and flavorful clouds. UB Pro Pod Tank is compatible with UB Pro Coils.


Details:

1. Dual 18650 batteries, Quest 2.0 chipset
2. Transparent mod design makes it more modern and dazzling
3. Five vaping modes: VPC/Bypass/Wattage/Voltage/Temperature Control(SS904/SS316/Ti/Ni) mode
4. Three firing mode: SOFT/NORM/HARD mode
5. Three user records, type-c fast charging
6. With 5ml UB Pro Sub Ohm Pod Tank
7. Triple airflow channel, adjustable airflow system
8. Easy side refilling system
9. Compatible with UB Pro Coils
10. 0.96 inch full-color TFT display screen
11. Multiple protections: Short Circuit/Weak Battery/Overheat/10s Over-time Protection





Rincoe Jellybox Nano Kit

Jellybox Nano Kit is built with 1000mAh battery, has 10-30W power range. It can be charged anywhere with type-c charging port design. It features 3 LED lights which will shine through into the full device. The pod can hold 2.8ml e-juice capacity and features leak-resistant design. There is adjustable airflow function on the side. A mesh 0.5ohm coil (for RDL, freebase e-liquid) and a mesh 1.0ohm coil (for MTL, nic salt e-liquid) are included in the package to bring you different vaping.


Details:

1. 1000mAh battery capacity
2. Replaceable coil, type-c charging
3. 2.8ml pod capacity
4. Lightweight and portable size
5. 3 LED lights can shine through into the full device
6. Supports 1.0ohm and 0.5ohm mesh coil
7. Leak-resistance & independent airflow design
8. Safety protection: 8s Auto Cut-off/Over-heating/Low Voltage/Charging/Short-circuit/Over Charging Protection





Vandy Vape Kylin M Pro RTA

Kylin M Pro RTA increases the e-juice capacity to 8ml by engraving the cnc inside the hardware. Utilizing top airflow intake design, it is anti-leaking. It features long lifespan and replaceable mesh coil, you can choose different mesh style coils in different resistance to enjoy more vaping. It is easy to build and refill. A 0.2ohm and a 0.15ohm A1 M coils are included in the package.

Details:

1. 0.2ohm and 0.4 mesh coil
2. Leakproof top airflow system
3. 810 replaceable drip tip
4. 5ml e-juice capacity
5. Adjustable airflow system

Hello friends, we bring a new round of giveaways and the prize is the new Voopoo Drag X Pro Kit. We wish you like it.

The new Drag X Pro is powered by a single 18650 or 21700 battery with a power up to 100W. This is a major update of Drag X Plus. Another major change of the new GENE.FAN 3.0 is-it adds a switch button, you can use the switch button to turn on/off the device (default setting) or use it to lock the device. You can enter the settings menu to decide how to use the switch button.

More details about this kit can see in VOOPOO Drag X Pro Pod Mod Kit 100W

Simple to enter:

1. Do you like Voopoo vape brand products, which one do you like best?

2. Which new Voopoo brand products do you like best recently?

3. What the favorite vape kit you like for Voopoo?

Note:

1. You must be 21 or older.
2. The contest will end on 18.09 and one winner will be chosen via random.org.
3. Number your replies.
4. Each entrant with no more than 3 replies.

Hi.

I am using a quote, so it is easier to read. You can read it or just skip it.

I am making my own liquid. I always make it 70VG/30PG.

For the past 2 years I have used squonker.

I have used:

1. WOTOFO RECURVE SQUONK MOD
together with
2. WOTOFO PROFILE RDA

The Profile RDA uses mesh coils and it had 0.13-0.15 Ohm resistance.

After every inhale, I would squonk the bottle to keep the cotton saturated.

A few weeks ago my Recurve MOD broke where it holds the battery.

So I took out my IJOY CAPO Squonker (which has broken bottle, so squonk does not work) together with KYLIN M RTA.

After using Kylin M RTA for a month I remebered why it was put in a shelf - it would constantly got hot spots and a burnt taste, so every often it would need an adjustment.

Click to expand...

So, since I cannot use my WOTOFO Profile RDA and Kylin M RTA always needs an adjustments for hotspots, I decided to buy HORIZON SAKERZ SUB-OHM TANK.

But, what I have noticed, is that HORIZON SAKERZ SUB-OHM TANK is using 2-3 times more liquid than Profile and Kylin M.

How can I make it use less liquid?

Make the liquid thicker - 80VG/20PG?

Thank you.