Hey Guys,

I have 2 clutch X18 mech mods. For some reason one (The black one) is hitting much weaker than the other (Gunmetal). This just started today. Prior to today, they both hit equally hard.

I have tried swapping the RDAS to see if it was related to the build / coils or RDA. But the trend continues. Whatever RDA i have on the gunmetal one just hits much harder and ramps up much faster. Both RDA’s are the same (Asgard minis) with the same exact coils and the same exact build (Dual 2.5mm Aliens @ 0.1). But as mentioned above i did swap the RDAS and whichever one is on the gunmetal mod just ramps up way faster and hits much harder.

I also tried with several sets of fully charged batteries to rule out a battery issue. I even put the batteries from the gunmetal one in the black one, and still didn’t see any change.

My only guess is maybe some of the contacts on the inside are dirty or damaged? If so how would i go about cleaning them?

Or if anyone has any other ideas as to what might be the cause please let me know.

Thanks!

As a vaper that started back in 2013, with a CE4 clearomiser and ego battery, I have had a few evolutions of what I vape and the types of liquids. Having gone from nicotine base style juices on MTL devices, then moving on to high VG for the richer flavour and cloud - I found myself like many others coming back to MTL vapes with salt nicotine.

Why would I drop the High VG for more nicotine, I found I was chain vaping the high vg, where there simply wasn't enough bite. Nic Salts helps me get that hit of nicotine I need, without being chained to a sub ohm vape kit. If you have wondered more about salt nic and what type of kits work best, check out our guide below. Thanks for reading

• Best Vapes For Nic Salts

David - Founder Vape and Juice

Regulated dripping on a budget!

Flawless 26650 100W mod: Good used condition, as shown in the pics. Board/menu are reminiscent of some of the old IPV stuff. Does wattage and TC. Mod will hold a 24mm atty flush.

Hellfire Sentinel 22mm RDA clone: Good used condition. Comes with all spares including 510 adapter and squonk pin.

$28 shipped. PP F&F or fees on buyer. Ships same day if payment made by 10AM EST, otherwise next day.

If the pics don't show up in Tapatalk, please PM me and I will email a link to the pics.

Morph S Pod-80 Kit is powered by a single 18650 battery (not included), bringing you up to 80W of power to your satisfaction. Along with the stability of 4.1V voltage output, which optimizes the output and brings a more stable flavor even when the battery is about to run out. Relying on 1.5A charging current, 2 hours is the limitation to charging the battery from zero to full. It is capable of 5ml vape juice capacity, playing with a toggle-style air switch to adjust the airflow via dual air inlets, this versatile LP2 pod achieves the ideal vaping style with the most mellow flavor for MTL, RDL, and DL vaping needs.

SMOK Morph Pod-80 Kit becomes a monstrosity because of its gigantic 3000mAh integrated battery, bringing you up to 80W of power to your satisfaction. Along with the stability of 4.1V voltage output, which optimizes the output and brings a more stable flavor even when the battery is about to run out. Relying on 1.5A charging current, 2 hours is the limitation to charging the battery from zero to full. It is capable of 5ml vape juice capacity, playing with a toggle-style air switch to adjust the airflow via dual air inlets, this versatile LP2 pod achieves the ideal vaping style with the most mellow flavor for MTL, RDL, and DL vaping needs.

These pods apply to strong magnets that offer a superior function to avoid damage from the crash. In respect of the coils that are available for all LP2 series coils, 3 silicone rings inside the coils cooperate with the leakproof pod base inside the pod stem the liquid leaking efficiently. When it comes to the OLED screen, it display the precise date for better viewing, with its large fire control and On/Off button, you can feel the high-quality performance and the comfort for your fingertips. The kit must spend almost 0.001s to heat up.

More details for these 2 pods please check the link below
SMOK Morph S Pod-80 80W Pod Kit >> https://www.3fvape.com/51818-smok-morph-s-pod-80.html
SMOK Morph Pod-80 80W Pod Kit >> https://www.3fvape.com/51809-smok-morph-pod-80.html

The website I used went out of business and I need a replacement that lets me at least kind of choose the PG/VG ratio because too much PG I don't like but too little and it just doesn't have the kick.

Answer questions to win the drag x/s pro!!

Questionnaire link: Voopoo U&A questionnaire

Tell us your thought and attitude.

The Lost Vape THELEMA QUEST 200W Starter Kit, featuring dual 18650 batteries, 5-200W output range, and is paired with the UB Pro Pod Tank. Outfitted with the QUEST 2.0 Chipset, the THELEMA Quest Kit has an wattage output range of 5-200W and offers a temperature control suite for those that prefer a tailored vapor output. Constructed from durable zinc-alloy, the chassis of the THELEMA Quest Mod utilizes PC materials for a transparent battery door for a visually striking look. Paired with the UB Pro Pod Tank, the Lost Vape THELEMA Quest Kit utilizes coils from the UB Pro Coil Series, delivering massive flavor and vapor from your favorite eJuice, holding up to 5ml within the side-filled pod.



Features:
1. 26mm Base Diameter
2. 28mm Widest Diameter
3. 5ml Pod Capacity
4. Side Fill System - Silicone Stoppered
5. Lost Vape UB Pro Coil Series
6. 0.15ohm UB Pro P1 Coil
7. 0.3ohm UB Pro P3 Coil
8. Press Fit Coil Installation
9. Dual Slotted Airflow Control Ring
10. Threaded 510 Connection
...

Click here for more:

Thelema Quest 200W Kit: Lost Vape Thelema Quest Kit | Healthcabin

Here comes the first Geekvape Z Series Tank exclusive for MTL:Geekvape Z MTL Sub ohm Tank 2ml! There are 6 colors for your choice!
Industry-leading leakproof top airflow.
Two hollow-carved “Z”s on a slim body.
New Geekvape A Series Coil, made for MTL!
This MTL experience is from A to Z!


Top Airflow System for MTL
• A perfect combo for zero leakage and precise MTL airflow control.
• The air flows from the side inlets, more easily to reach the coil to make MTL flavor better and airflow control more precise.

Leakproof Design
Industry-leading Z-level leakproof design. There’s nothing you need to worry when the leakage problem has been solved. Just grab and experience zero-leakage!

Stylish Tank Design
• Two hollow-carved “Z”s, a stylish way to check the liquid level.
• The glass tube is well protected by the metallic shell, which makes the tank more resistant to breaking.

Geekvape A Series Coil
• New coil series (0.8Ω, 12-16W/1.2Ω 8-12W) is made for MTL. Flavor enriched. Throat-hit enhanced.
• Long service life for an abundant vape.

Sourcemore sent me the Digiflavor Z1 SBS kit for the purpose of this review.





Side by sides are super popular lately, and for good reason. Their compact size packs all the function of a mod + atomizer into basically the size of a modest mod. Sometimes, that form means giving up some features. Sometimes, it means a proprietary tank and committing to a meager selection of drop in coils, but the Z1 is not going to fence you in. The rebuildable deck makes it a cinch to customize it to your preference, or you can use your favorite atomizer up to 24mm – although, as good as the included Siren 3 GTA is, you may not want to swap it out.



In the box you get:

• The Z1mod
  
  
• Siren 3 GTA
  
  
• Type C charging cable
  
  
• DF Triangular tool
  
  
• Spare parts pack
  
  
• Spare glass
  
  
• Box of coils
  
  
• User manual
  

The Siren 3 GTA has a small but easy to build deck, and the coils that are included are 2 and 2.5mm ID, from 1.2 ohms down to .5. The are NI80 which is not my thing, but I grabbed a .5 and dropped it in. Why I don’t care for NI80 is I can taste it, and it interferes with the flavor for me. But I can say that the Siren has such good flavor, I don’t even notice any difference between this and my usual SS316. And they come in a nice little box, so they’re in perfect shape when you go to use them.



The cap twists off with a half turn to reveal the generous fill ports, and the air flow offers a wide range of adjustment. It’s considered MTL, but I get a decent restricted DL with it wide open. It has a two-sided air flow ring, one small hole and one large – it’s easier to show than tell how that works.











Mod Features:

• Dimensions – 105.7mm by 49mm by 25mm
  
  
• Wattage output – 5-80W
  
  
• Voltage output – 1.0 – 8.5V
  
  
• Resistance range - .1 – 3.0ohm
  
  
• VW, VV, and Bypass modes

• 

The menu – click Fire 5 times to turn the mod on and off. Press Fire 3 times to enter the menu, and use + or – to switch between wattage, voltage, and bypass modes. Press the + and – to lock the adjustments, and with the adjustments locked, you can also lock the fire button by pressing it 3 times. To unlock just press Fire 3 times, then unlock the + and – by pressing both.



The body is made of zinc alloy and the finish is nice. It’s odd though, that there are three metal colors. The color I got is called Silver Grey Scallop Shell. The main body is almost a gunmetal, the battery cap and Digiflavor logo plate on the side are closer to sandblasted pewter, and the battery tube is stainless steel. It’s actually not a bad design element, and the cap and plate match the tank really well. The abalone is not real abalone though – it’s more than a sticker, like some sort of thin panel. It looks nice at any rate, not cheap or cheesy. The screen is tiny, but clear enough to read. It doesn’t have enough room to show anything but the basics, but that’s all I need. Seems to help with battery life, which is really good.



I do find the threading on the battery cap a little crunchy, and you have to press down on it a little to get it to catch – it’s spring loaded. That, and the too-long metal drip tip of the Siren, are my only complaints. I swapped out the drip tip for a pink 510 from my collection and have been really enjoying this little kit.



Use code Z1SBS to get this kit for $50.30.



Thanks, Sourcemore, for the opportunity to review the Digiflavor Z1 SBS Kit!

Hey guys. Today let's take a close look at the Thelema Quest Mod by Lost Vape. And it is available separately now in our online shop. Here we go!

The Thelema Quest Mod is the more affordable version of the Thelema DNA250C Mod. It also features a whopping 200W of power from dual 18650 batteries which are conveniently hidden behind the grip. This makes swapping the batteries out absolutely effortless and has as an added bonus that you can also swap out the grip for a new look every time you go out. If you don't have a charger to recharge the two 18650 batteries, have no fear. The mod also features a Type-C charging port on the control face that works with a 5V interface to quickly achieve a full charge.

In the operation department, the mod also does not disappoint as there are 5 vaping modes: vpc, bypass, wattage, voltage, and temperature control. And, there are also three additional firing modes for a more personalized experience. These include a soft fire mode that lowers the standard wattage, the normal fire mode which utilizes the standard settings of the vaping mode you are in, and a hard mode that cranks up the initial output above the standard level. At last, this Lost Vape mod also has 3 available memory slots. In this way, you can easily save and use your favorite vape settings.

Buy it here: Lost Vape Thelema Quest Box Mod 200W

You may also like:
Vandy Vape Nox Pod Kit 60W 1600mAh
wotofo profile mod review

Like Freemax Marvos T 80W Kit, Marvos S 80W Starter Kit also features the two-side airflow control design, and so you can customize your perfect airflow freely. Unlike traditional pods with limited airflow, Marvos DTL Pod Tank is highly upgraded with more flexible airflow, transplanting the two-side airflow control design from the sub-ohm tank. So it can allow you to change the airflow exactly to your desire.

For more other features of Freemax Marvos S 80W Kit, please enter Freemax official vape website directly>> Marvos S 80W Kit | Freemax - Taste the Clouds, Feel the Flavors!

This time,I will introduce you the BMOR Sober Pod Kit.It adopts stylish CMF design and magnetic suction and buckle triple reinforcement and is made of PCTG.

Bmor Vape Sober Pod Kit works with 650mah built-in battery with 15W power and 3.6V steady voltage output. Based on its 4ml vape juice capacity coupled with a 0.8ohm meshed coil, making it more efficient to heat up and delivering scrumptious flavor and vapor.You could click vape store near me to learn more details.

Features

• 650mAh Integrated Battery
• 3.6V Steady Voltage Output
• Tiding Battery Indicator
• Draw Activated Firing Mechanism
• Magnetic Suction And Buckle Triple Reinforcement
• 0.8ohm Meshed Coil
• Intriguing CMF Design

Quick Link:BMOR Sober Pod Kit 650mAh 15W

$28.89 SMOK Nord 50W Kit

$28.99 SMOK G-PRIV Pro Pod Kit

$30.99 SMOK G-Priv Pod Kit

$22.99 SMOK Stick N18 Kit

$25.89 SMOK Stick R22 Kit

$33.99 SMOK Morph 2 Mod

$48.99 SMOK Morph 2 Kit

Dear Vape Friends,

Hope you are doing well!

To welcome the brand new September, We are going to giveaway something different. Have you ever used disposable kit before? Here is the chance. We will giveaway YUMI Bar Disposable Kits, which is harmless to others and the environment, with 10 winners in total. Ends on 6th Sept. Come join us and win them home for free!

Prizes

• 5*YUMI Bar 1500 Puffs Disposable Kit–50MG or 5*YUMI Bar 1500 Puffs Disposable Kit–0MG

*Note: Nicotine strength & Flavors will be shipped out randomly if you are lucky to win!

About YUMI Bar 1500 Puffs Disposable Kit
Yumi Bar 1500 Puffs Disposable Kit is mini sized, easy to carry and very close to traditional cigarette taste. Each cigarette can last up to 1500 puffs. Yumi Bar 1500 Puffs Disposable Kit is harmless to others and the environment with no danger of second-hand smoking. No ignition and fire required and does not emit any smell. Yumi Bar 1500 Puffs Disposable Kit uses vacuum packing to keep the cigarette clean and healthy. Vacuum packaging prevents the liquid from evaporating and the airflow working automatically. It helps to keep the original taste and giving you a better experience.



Join & Win
Finish the tasks below and win YUMI Bar 1500 Puffs Disposable Kits home easily. Good luck to you all!!

Please click here to join: HealthCabin Giveaway or YUMI Bar Disposable Kit Giveaway | HealthCabin

For the past 5 years I've been vaping C & D from Alien Visions. It was the juice that got me off tobacco 5+ years ago. Looks like they've hit a snag, so looking for a decent substitute. Preferably a juice that produces a good cloud with a smooth tobacco flavor. If it's flavored a little bit, that's ok too.

Interesting article in Forbes about the potential Unethical Influence of Congress over the FDA regarding the PMTA process.

Lawmakers’ Pressure On FDA Review Of New Tobacco Products Blurs Line Between Oversight And Undue Influence

Freemax sent me the Freemax Marvos S 80W kit for the purpose of this review.



I hadn’t heard of this kit before holding the box in my hand, and was surprised to find I was sent a first batch item. For this reason, please note that this may not be exactly the item(s) you receive in the future.

• 
  In the box, you get:
  
• 1 Marvos S 80W mod
  
  
• 1 4.5ml DTL Pod Tank
  
  
• 1 0.15 ohm mesh coil
  
  
• 1 0.25 ohm mesh coil
  
  
• 1 USB charger cable
  
  
• 1 User manual
  
  
• 1 Warranty card
  
  
• 1 Warning card
  

Small detail, but I hope Freemax continues to package in this manner, the ribbon on the foam protector helps get the mod out of the box, and also makes it easy to get the foam out. All the extra stuff is in a tidy box below, easy to remove with the tab.



Specs:

• Dimensions 110.2mm x 51.7mm x 25.7mm
  
  
• Wattage output 5 – 80W
  
  
• Voltage output .7 – 4.2V
  
  
• Single 1865 battery
  
  
• C type USB charging
  
  
• 4.5ml pod capacity
  
  
• Bottom fill
  
  
• Press fit coil
  
  
• Wattage, Smart, and Bypass modes
  

Let’s start with the pod. It’s plastic – I have not found any specifics on what type- but it’s quite thick and does not look like it would be easy to break. The drip tip is built in, which will be a con to some. The fill port is on the bottom and accessed with a reasonably sized silicon bung. It does not seem terribly sturdy, and I worry it may not last very long. It is meant to be used as a pod, from what I gather, and probably not designed to be as long-lived as a regular tank. Replacements will be available, Freemax says.



So none of this is a huge surprise. What is different is the pod is held into the air flow ring with magnets, while the air flow ring screws into the 510 on the mod.



And that would be interesting, since it would be so easy to pop one pod off, pop another on, if you want a quick flavor change. However, since the AFC ring spins and does not lock, it makes it tricky to tighten the AF to the base. Seems to unscrew well enough, but hard to tell if it’s screwed on right.



The two-sided air flow gives unrestricted air and closes down to fairly restricted, which should suit most DL vapers, but may be just a wee bit airy for some of you.



The MS type coils are, according to Freemax’s site, ‘Better than the best”. I’m not going to say I agree with that, but they are every bit as good as every Freemax coil I’ve tried, and they’ve all been among the best coils I’ve used.



The mod is petite and I really like the aesthetics. The body is made of zinc alloy and vegan leather. The leather looks and feels like regular leather, but with a little cushion. The zinc is so smooth, the finish is perfect, the edges are rounded. It’s really comfy in the hand.



It holds one 18650 battery, and the cap threads are smooth.



The .95” TFT screen on mine is slightly scratched, an issue that likely is a first run problem that I wouldn’t expect to see in later production.



The menu is easy and simple. Five clicks of the power button turns it on and off. Three clicks changes between modes, Power, Smart, and Bypass. +/- adjust the wattage output which adjusts in 1 watt increments and does not round robin. Press + and - and hold to lock/unlock. Press – and power to change the screen color, and you can pick from blue, orange, green, red, and white. The mod I was sent is called yellow, and the orange screen compliments the leather nicely. The power does reset to 50W when you change the battery, so be sure to adjust it before vaping.



My thoughts… I’m not in love with the pod, mainly because of the rather wimpy fill bung. I could be persuaded to be a bit more of a fan when I see what the price of replacements is going to be; if they’re going to be a couple bucks like most replaceable pods, I can live with that. If they edge closer to the price of a cheap tank, I’ll say no thanks. They are super easy to deal with, the coils are great, and the vapor and flavor are better than expected. The air flow is lovely, far better than I’ve found in similar little kits, but I’d like to see a stopper on the ring so it doesn’t free spin like it does.



I love the mod. It’s simple, but beautiful, elegant even. It fits and feels great in the hand, and the +/- buttons are on the side where I’m not constantly hitting them, although they do lock too, so no accidental adjustments.



Thanks, Freemax, for the opportunity to review this kit.

Hi ECF members, In this review I take a look at the K1000 Plus ePipe Kit from Kamrytech. The Kamry K1000 Plus ePipe Kit was supplied for the purpose of this review by Sourcemore.

Kamry K1000 Plus ePipe Kit 1000mAh with 4ml K1000 Plus Atomizer




Introduction

I think most when thinking of Kamrytech in the same thought will also visualise one of their affordable epipes which they are renowned for! In this almost mini review I take a look at the upgrade to the K1000, the K1000 Plus which comes with the K1000 Plus Atomiser.

The K1000 Plus has a 1100mAh in-built battery and is a direct output device, it comes with protections so is what is referred to as a semi-mechanical device! When not in use the angled base of the bowl means it sits at an angle to encourage wicking and the 0.5ohm coil heads give 21w to 35w of power! Always wanted to try an epipe so let's crack on!

_________________________________________________________________________



In The Box





Contents:

● 1 x Kamry K1000 Plus Battery

● 1 x Kamry K1000 Plus Atomizer (4ml)

● 1 x USB Cable

● 2 x 0.5ohm Coil

● 1 x Manual




_________________________________________________________________________



Aesthetics and Ergonomics

The K1000 Plus comes in sturdy cardboard box packaging with each individual part in it's own compartment. Just two colour options are available Black and Wood Grain, I received the Wood Grain which some may refer to as Walnut, just to mention the Black version also has a grain effect!

The bowl is constructed from Zinc Alloy and has a slanted base, the bowl also has a wood grain effect finish with chrome rim and fire button up top, finally towards the top on the front of the bowl we find the micro USB port. Just to point out the finish uses an anode oxidisation process which should prevent fading.

On the side of the bowl we have a vertically positioned air fed 510 plate with Gold plated, spring loaded 510. The atomiser fits onto the bowl via the 510 thread and then we have a wood grain effect heat reducing plastic elongated drip tip which looks very much like the mouthpiece of a wooden pipe!





I love how the assembled pipe stands up at an angle and once use to firing via the large fire button located at the top of the bowl it's a very ergonomically friendly device. At this stage the only negative I have is the fire button does give some rattle!




_________________________________________________________________________



K1000 Plus Specs and Features:

Dimensions: 28mm x 59mm (Pipe bowl)
Battery Capacity: 1100mAh (in-built)
Output Voltage: 3.3-4.2V
Output Wattage: Max 35W full power output
Suitable Resistance: 0.3ohm-9.9ohm
Charge rate: 0.42A
K1000 Plus Atomizer Size: 21mm x 35mm (w/o thread and drip tip)
Tank Capacity: 4ml
Included coil heads resistance 0.5ohm (21W-35W)
Triple safety protection for safe vaping
Angled bowl base, sits at an angle (no need for stand)
Thread: Spring loaded 510
Colours: Wood Grain, Black




_________________________________________________________________________



What You Receive?

You receive the main pipe bowl which houses the inbuilt battery, has the fire button with LED surround up top and 510 plate and threading on one side.





You then also get the atomizer plus two 0.5ohm coil heads, elongated pipe style drip tip, USB cable and paperwork




_________________________________________________________________________



The Atomiser

The K1000 Plus atomiser is basically a standard atomiser with 510 thread so can be used with other devices. We have dual cyclops airflow adjustment and up top a 510 drip tip fitment so if using on another device you can use an alternative drip tip.

The top metal section, chamber, air pipe and glass all appears to be one complete unit as I couldn't take it apart so if you do break the glass the whole atomiser will need replacing and that also explains why there is no spare glass or O-rings!

The base section unscrews from the main tank to reveal the coil head gets screwed into the base section and when screwing the tank back together the top of the coil head will also seal to the air pipe at the top of the chamber with an O-ring!

Looking inside the main tank section with base removed you can see 4 fill ports which are not the biggest but I had no issues filling both quickly and mess free, the capacity is 4ml. As far as I am aware the only coil option is the 0.5ohm (two are included) which are available in packs of 5!




_________________________________________________________________________



Operating The device

The K1000 Plus is a simple direct output device so as the voltage on the battery reduces so will the wattage output. The device is the usual 5 clicks of the fire button to turn on and off, both are indicated by 3 White flashes of the fire button surround!





That's it! simply press the fire button and vape, while firing the fire button surround lights up. With 30 seconds of inactivity the device will go into sleep mode to save power but will fire from sleep mode with no noticeable delay!

_________________________________________________________________________



Using Independently

Both atomiser and battery can be used independently as it uses a standard 510 thread and connection and the drip tip fitting is a standard 510 also! Although other 510 drip tips fit absolutely fine in the K1000 Plus atomiser it has quite a deep hollow as the pipe style mouthpiece's section that gets fitted inside the 510 fitment is a bit longer than with most 510's so when using other atomisers with the epipe the pipe stem style drip tip doesn't quite push all the way in but it works fine!




_________________________________________________________________________



Protections:

Low Power protection
Short Circuit Protection
Over 10s Protection




_________________________________________________________________________



Charging

I found this let the device down as it took just over 2 and half hours to charge, it does support pass-through but the supplied cable is very short!

When first plugging the USB cable in the fire button surround flashes White 3 times before lighting solid White for the duration of the charge, once fully charged the light goes out!

_________________________________________________________________________



My Thoughts!

I have always liked the idea of an epipe but never actually got one because I suspected it would have wicking and leaking issues due to the atomiser being on it's side but after using the K1000 Plus in the evenings since I received it and more extensively over the last 5 days neither have materialised as I haven't had any leaking whatsoever and it's wicked absolutely fine!

No specs are given for the coils apart from they are 0.5ohm but they are mesh and little flavour bangers and as I still have the same initial coil head in use means longevity is above average and also confirms there are no issues with wicking! I also like that the tank can be used independently and other atomizers with a 510 drip tip fitting can be used with the epipe battery and pipe style drip tip even if the drip tip doesn't quite push all the way in.

It is a direct output device so the vape got weaker as the battery ran down, the drop off is a total of 14w which is quite a lot but it was gradual and even towards the end of the battery life it still gave a decent vape and for the most part i was pleasantly surprised what a nice smooth vape it gave. The airflow adjustment gives varying RDL and semi-RDL draws, you can't really do a decent MTL but also not really a full on DL as even fully open there is some restriction!

The fire button does give some rattle but my main con is battery life and charging time. When I was using it just in the Evenings the 1100mAh battery was fine but since using it as my main device to more thoroughly test it then it has needed a couple of charges a day! It takes about 2 and half hours to charge which is quite sluggish for a 1100mAh, it does support pass-through though but if vaping while charging you might want to use a longer cable than the one supplied!




_________________________________________________________________________



Likes

Looks like a pipe
Very well made
Zinc Alloy bowl
Finish shouldn't fade due to process used
Stands at an angle so no stand needed
Fire button surround LED
Can be switched off
Goes into sleep mode after 30 seconds of inactivity
Protections
Ergonomic and fun to use
Despite direct output gives really good smooth vape even when nearing end of battery life
Supplied coil heads, flavour bangers
Above average coil longevity
Wicked surprisingly well
Suffered no leaking whatsoever
Adjustable airflow (Varying RDL and Semi-RDL draws)
4ml Capacity
Both atomiser and battery can be used independently


Cons

Direct output device (drop off in power) but still gives decent vape for entire life
1100mAh battery doesn't make it suitable as main device
Sluggish charge rate
Fire button rattle
If glass breaks the whole atomiser will need replacing
Bottom fill, have to remove atomiser from battery to fill
Full specs not given with coils


I would once again like to thank Sourcemore for supplying the Kamry K1000 Plus ePipe Kit for the purpose of this review, thanks for reading and stay safe!

Kamry K1000 Plus ePipe Kit 1000mAh with 4ml K1000 Plus Atomizer

_________________________________________________________________________

Hi Guys,

I just got my first Purge mod (Purge Slugger single 21700 mod)

I built it at 0.13 ohms with some Coilturd Aliens in my Asgard mini. I used a Samsung 30T battery. All I can say is damn it hit like a TRUCK!

This is my first tube mech mod. And I’m just wondering how it can hit so much harder than my Clutch X18 (dual 18650 Parallel mod?)

I use the same RDA on both (Asgard Mini’s)

But theoretically shouldnt my Clutch be hitting harder?

On the Clutch I’m running 2 X Sony VTC5A’s (25A x 2 = 50A) @ 0.09 = 196 W (At 4.2v)
On the Purge I’m Running 1 X Samsung 30T (35A) @ 0.13 = 135 W (At 4.2v)

But the difference is night and day. On the Purge Tube I took like 4-5 chain vapes and i literally felt dizzy (I use 3MG, but it felt like 10MG). Also the vape was way warmer and stronger.

On my clutch i chain vape 3MG all day and feel normal.

If anyone could clue me in that would be appreciated!

Thanks!

For Sale REO LP/SP Grands:

1: REO Grand LP SL Grand RAW : $ 90

2: REO GRAND LP Raw: $ 85

3: REO Grand LP Copper vein: $85

Condition: Very Good to Mint

Payment: PayPal or Check

Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.

Thank you for viewing.

Eleaf iSolo S with GX Tank Kit is shallower than most modern phones. Eleaf iSolo S Kit with GX Tank is consist of Eleaf iSolo S 80W Pod Mod and GX Tank.


With its 1800mAh built-in battery and 5.0ml vape juice capacity available for a variety of e-liquids, iSolo S Kit absolutely guarantees the persistence of vaping and helps you have a fascinating vaping experience. Eleaf iSolo S Mod takes advantage of AST technology that brings a faster heating-up speed, mellow and original flavor. Depending on this technology coupled with GX coil brings you the smart coil protection. the device will refuse to output when it detects the lack of e-juice, protecting the coil from dry hit and have a longer coil lifespan. It also provides a type-c port to satisfy your vaping experience without bearing any hassle during the process. the max output can be up to 80W, which offers a stronger power for it. As well as its 4.5mm wider filling hole diameter, it can give you a deeper throat threat.


Features:
1800mAh Built-in Battery
5ml Vape Juice Capacity
Provide A Type-c Port
Max Output 80W
4.5mm Wider Filling Hole Diameter
Size: 27.6mm* 26.4mm*126.9mm
Battery capacity: 1800mAh
Tank capacity: 5ml
Filling Hole Diameter:4.5mm
Output Wattage:1-80W
Charging Current:5V/2A(USB-C)


Quick links to this compact pod mod and pod kit as below


Eleaf iSolo S Pod Mod 80W >> https://www.3fvape.com/51782-eleaf-isolo-s-80w-mod-.html


Eleaf iSolo S Pod Mod Kit >> https://www.3fvape.com/51778-eleaf-isolo-s-80w-pod-mod-kit-with-gx-tank-.html

Ultroner Kamo Pod Kit is an exquisite, small and durable pod system kit. This kit has a lightweight frame and slim design, very easy to carry. It also has 4 different colors for you to choose from. This pod system kit must bring you a brand new vaping experience.


Ultroner Kamo Pod System Vape Starter Kit is with built-in 1400mAh capacity and with USB Type C charging port. It is small in size, large in power. The pod cartridge holds 4.0ml capacity and compatible with DEJAVU Pocket AIO Kit 0.6hom and 1.0ohm coils (included).





Specification:
Size: 50 x 60 x 20mm
Lowest voltage: 3.3V
Highest voltage: 4.2V
Built-in battery capacity: 1400mAh
Charging current: 700mA
Resting current: <50uA
Pod Cartridge capacity: 4.0ml


More details for this pod kit, please check >> https://www.3fvape.com/51761-ultroner-kamo-pod-kit.html

I've been done with squonking for a long time and figure it's time for these to move on to someone who will use them. Each of these is barely used and includes the RDAs and drip tips. All bottles have been cleaned with vodka and are in great condition, aside from a few dings on the RST in group B. If someone wants all three, I'd let them all go for $250 shipped. PP only and I'll ship same day, if paid for timely. I'll also include some extra RDAs. Please ask questions

SMOK Morph Pod-80 Kit becomes a monstrosity because of its gigantic 3000mAh integrated battery, as well as SMOK Morph S Pod-80 Kit contains a single 18650 battery, bringing you up to 80W of power to your satisfaction. Along with the stability of 4.1V voltage output, which optimizes the output and brings a more stable flavor even when the battery is about to run out. Relying on 1.5A charging current, 2 hours is the limitation to charging the battery from zero to full. It is capable of 5ml vape juice capacity, playing with a toggle-style air switch to adjust the airflow via dual air inlets, this versatile LP2 pod achieves the ideal vaping style with the most mellow flavor for MTL, RDL, and DL vaping needs.


These pods apply to strong magnets that offer a superior function to avoid damage from the crash. In respect of the coils that are available for all LP2 series coils, 3 silicone rings inside the coils cooperate with the leakproof pod base inside the pod stem the liquid leaking efficiently. When it comes to the OLED screen, it display the precise date for better viewing, with its large fire control and On/Off button, you can feel the high-quality performance and the comfort for your fingertips. The kit must spend almost 0.001s to heat up. Anyway, these meticulous features are crammed into such a sleek kit, once you have a chance to use it, you will be immediately excited about it.


Features
• 3000mAh Integrated Battery For Morph Pod-80
• Single 18650 Battery For Morph S Pod-80
• Up to 80W output power
• 4.1V Voltage Output
• 1.5A Charging Current
• 2 Hours Charging
• Capacity Of 5ml Vape Juice Capacity
• Satisfy MTL, RDL, And DL Vaping Needs
• Strong Magnets
• 0.001s To Heat Up
• Paired With An LP2 Pod
• Compatible With All LP2 Coils
• Toggle-style Air Switch
• Dual Air Inlets

Hellvape Dead Rabbit R Tank boasts a 5ml vape juice capacity and modifies the structure of its bottom airflow system and a condensed chamber aimed at a more delicate flavor. A 0.2ohm resistant value is recommended to the power range of 50 to 60W. One pack of R coil contains 10 stock coils, allowing you to rebuild your coil 10 times. Compared to the regular coil, it can save 75% cost and enjoy more joy by rebuilding your own tank. it also adds a 510 drip tip that conforms to human mechanics, what’s more, it utilizes a strong PCTG plastic material to ensure a superior level of durability.


Quick Links:
Hellvape Dead Rabbit R Glass Tube
Hellvape Dead Rabbit R Coil Kit

Features:
New style meshed rebuildable tank
Easy to guide e-liquid rapidly, with long life span
Quarter turn top fill system, classic celtic knots design for comfortable grip & bayonet design for easy opening
Knurled grip to assist bottom airflow adjustment easily to bring extremely superior flavor
Changeable drip tip
R coil accessories to build the coil 10 times, cost-saving