New in box brass Armageddon Redemption 24mm RDA. Includes 2 drip tips and spares (including squonk pin).

This thing is built for big coils and big power. I'm not much of a cloud chucker but I do get the urge now and again. And when I do, this RDA makes me chuckle. It's really kind of ridiculous.







For reference, the one I use:



$25 shipped via USPS First Class mail. PayPal F&F.

I have been a member on here I believe since 2014 and for some reason it says to contact an administrator when I try to send a PM, can someone please help me with this situation thank you ahead of time it will be greatly appreciated

Sent from my SM-N975U using Tapatalk

I got a taste for using superfine Clapton wire in my MTL RTAS and have purchased some pre-made Vandy Vape coils to use. I know that VV also makes bulk spools of the wire but only in 10ft lengths, and hard to find in stock.

I went to Lightning and KBee to see what was available, but found nothing that I was looking for - 30ga single core wrapped with 38ga in stainless steel and kanthal.

So - any other source for 30-40 ft spools?

I suppose I can try twisting some fine kanthal or SS but would prefer the clapton.

The Nevoks Pagee Pod Kit is the latest generation of pods to be released from the folks over at Nevoks. With a card style design that hasn't been seen for a while, it packs a lot of extra features that older kits of this style lacked.

═╣ Nevoks Pagee Pod Kit ╠═

00:00 ◄ Intro, specs and close look
07:45 ◄ Vape
08:34 ◄ Thoughts


Login to view embedded media

I have a question about nicotine pouches, that I can find the answer to anywhere. I figured DYIers may know.

I have Sapphyre Nic Concentrated Nicotine Additive, 1 Nic Pack, and it says it's 1.8ml 20%. I understand that to mean that the pack has 1.8ml at a strength of 20% = 0.36ml of nicotine.

Now nicotine strength is usually given in mg (not ml), so a 60 ml bottle at 3 mg/ml nic would have a total of 180mg of nicotine.

Furthermore, the back of package states that 1 nic pack added to a 60ml bottle at 0% nicotine would results in e-liquid with 6 mg (per ml, I presume).

I understand that there is parity of mg to ml for water (1ml of water has a mass of 1mg), which probably isn't true for nicotine, but I still can't make any sense of this math.

How does one pack with 1.8ml at 20% mixed with in with a bottle of nic-free e-lquid of 60 ml turn it into 6mg/ml??

Sapphyre Nic -20% Liquid Nicotine 1.8ml (5 Pack)

VaporBomb's website is unavailable and their phone seems to be disconnected. I have been vaping their Fire & Ice, or Cinnabomb for 10 years. Any suggestions for a substitute? I'm also willing to DIY if anyone has a good recipe.

Very, very sad....

Good day, Hope you are all doing well.


We would like to introduce the latest device from UNIVAPO,


The MISO PRO

We are looking for pod lovers and future pod users to be the first to try and test it.


Please comment your honest and genuine answer to this question:

What is your main reason for vaping?
Do you think MISO pro would be able to give the feeling of vaping satisfaction that you are looking for?

There are no right or wrong answers, it is your personal opinion.


Kindly spread and share @univapo.


Thank you so much Fam, or should we say UNIVapers


Have a great day!

Hello again and thanks for tuning in for yet another review of mine. This time I will be discussing the Uwell Aeglos P1. A while back I reviewed the original Aeglos and liked it quite well. The P1 is definitely an upgrade from the original with some really nice features. I was sent the Aeglos P1 by Sourcemore in order to provide a fair and honest review. I hope to accomplish that and give an opinion or two along the way. There are a ton of pod mods on the market with what seems like more coming out each day. Hopefully the Aeglos P1 can hold its own and have some features that will make it stand out. Let’s take a look at some product information and see if the P1 might be something you would like to try.




WHAT’S IN THE BOX?

1* Aeglos P1 Device
1* FeCrAI UN2 Meshed-H 0.2ohm Aeglos P1 Coil (pre-installed, DTL)
1* FeCrAI UN2 Meshed-H 0.6ohm Aeglos P1 Coil (RDL + MTL)
1* Pack of O-rings
1* User Manual




SPECIFICATIONS:




FEATURES:

• 1. Easy adjustment, smooth operation
• 2. Perfect for any tank you can find
• 3. Replaceable 18650 battery, 5V/2A quick charging
• 4. 0.96 inch high-definition TFT color display
• 5. Device lock(fast press 5 times) features an accident firing prevention
• 6. Adjustable airflow and output
• 7. The Pro-FOCS technology ensures an authentic flavor juice
• 8. Puff counting to keep track of your vaping
• 9. Self-adaptive to different coil resistance
• 10. Compatible with Aeglos coils
• 11. Highly versatile atomization system

INITIAL THOUGHTS:

The packaging for the P1 is pretty average for a device like this. Not fancy but not cheap. When I opened it, I immediately liked the appearance of it. The brown leather is very attractive in my opinion along with the zinc alloy frame. One thing that I noticed early on was how they shaped the bottom of the device. It does give it a nice appearance but makes it easier to tip over when sitting on a table or desk. It looks good but takes away from the stability a little bit.




On one side of the mod the word UWELL is stamped into the leather and the other side has the word AEGLOS stamped into the leather. The leather wrap is part of the C frame that covers the battery and battery compartment. There are also two lines of stitching in the leather. I noticed that the leather wrap does not seem to be padded at all underneath. It’s not something that bothered me but I did notice that when pushed on the backing seems solid and not padded at all.











Like I said, I think the P1 has a very attractive appearance. On the front of the device is the nice sized square fire button with the multicolored display underneath followed by the plus and minus buttons that are a little on the small side but not bad. On the bottom is the USB-C charging port which offers a 2 amp charging rate if you have to use it to charge. I ran an 18650 battery down until the battery indicator was red and was able to recharge in a little over an hour. I was able to get 290 puffs on the .2 ohm coil with the output set at 32 watts and airflow control about 1/3 open. The .2 ohm coil is rated 45-52 watts but I really liked the flavor I was getting at the lower setting I was running and had no issues with leaking despite running the coil lower. The other coil included is a .6 ohm coil. I didn’t like this coil near as much as the .2 coil. Even with the airflow completely open it was a fairly restricted direct lung vape. I ended up running this one at 20 watts while it was rated at 23-27 watts. This is out of character for me since I tend to like the higher resistance coil in most kits that I test for reviews.

One thing that I didn’t quite understand was what the bottom o ring on the coils is for. When you press the coil in the top one and the next one down seal in the pod tank but the bottom one doesn’t really make a seal that I can tell.








I very much like the multicolored display on the Aeglos. It’s easy to read and very bright in my opinion. From top to bottom the display shows:

- Pow(power) and battery indicator

- Set wattage

- Puff counter

- Voltage under load

- Coil resistance

- Time of current puff


The menu system is fairly simplistic on this one:

- Press the fire button five times to turn on and off

- Press + and – buttons to reset puff counter

- Press fire button and – button to lock entire device

- Press fire button and + button to lock just the adjustment buttons

- Press the fire button and the + and – buttons to do a factory reset







FINAL THOUGHTS:

I have to say that I liked the Uwell Aeglos quite a bit. I definitely preferred the .2 ohm coil on this one. To me the .6 ohm coil was just a little too restricted on the airflow even with the airflow completely open. I wanted to run this coil at 21 watts but the vapor was just a little too warm for me so I ended up turning it down to 19 watts.

I neither like nor dislike the smart function. It really doesn’t matter to me since I’m going to set it where I want but can see where it is good for inexperienced users. I know it’s quite a bit lower than the recommended wattage but I really liked the .2 coil in the low 30 watt range. To me I got plenty of flavor and vapor at that setting and it wasn’t too warm since I don’t like that. Both of the coils produced very good flavor in my opinion.

The style of airflow adjustment on this one reminds me of some other pod mods that I’ve reviewed in the past but the fins on the tank are a new design and it’s kind of nice how they only turn so much before the fin stops it rather than have a pod that can be turned 360 degrees.

The Aeglos is very attractive in my opinion and I very much like the design and hand feel of it. I like it enough that I have already ordered a 510 adapter for it. It would have been nice if it had been included in the kit or even sent along with the kit by Sourcemore.

I’d like to thank Sourcemore and Lilia for sending the Uwell Aeglos P1 Pod mod kit for this review. Also a big thanks to all of you readers. Below is a link to the product on the Sourcemore website and a coupon code if you’d like to try one yourself.


Uwell Aeglos P1 Kit 80W Pod Mod Kit (sourcemore.com)

Coupon code: AEP1 $26.81

...this stuff arrived in the mail.



I smoked my last cigarette the day that stuff arrived on 7/21/14 and never looked back. ECF was the first website I found when I started looking for e-cig info and I'm grateful for the site and all the wonderful members. I've made some genuine friendships here.

SMOK Nord 50W Pod Kit continues the superior and stable performance of the SMOK NORD series, it comes with an internal 1800mAh battery that brings you up to 50W of power to your satisfaction. The Nord 50W Kit comes in two collections with the most intriguing color scheme and sought-after textures to show off its innate elegance. The 1800mAh built-in battery brings long-lasting life, the Type-C 1.2A maximum charge current makes fast charging stable and more efficient! Up to 50 watts of horsepower can easily handle all of your vaping needs, ensuring worry-free vaping all day long. The flashing frequency of the white LED light can show various function protections and tell you the status of the device.

As for the Smok Nord 50W Pods, there with two versatile pods and different capacities, 4ml and 4.5ml, which work perfectly with the upgraded airflow system to deliver scrumptious flavor and massive vapor: one is the Nord pod compatible with Nord coil series, and the other is the LP2 pod compatible with the LP2 coil series with enhanced leak-proof technology. The air intakes on both sides can be adjusted by moving the air switch on the back of the device to achieve the ideal vaping style with the most mellow flavor. When the meshed coil gets in touch with the saturated cotton, a delightful taste with smooth flavor and rich vapor arise spontaneously. When the coil is inserted into the pod, the specially designed base part of the pod can lock the e-liquid and the condensate generated during vaping, helping to further prevent leakage.

Parameter:

Resistance: LP2 0.23ohm(20-45W)
nord regular DC 0.6ohm coil(20W)

Features:
Classic and iconic appearance, the most intriguing color scheme and sought-after textures
Latest Leak Proof Technology (coil silicone rings & pod base part)
Stepless Airflow Control, air intakes on both sides
Internal 1800mAh Battery, Max 50W output
Leak-resistant Pod
4ml Nord 50W LP2 Pod is compatible with LP2 coil series
4.5ml Nord 50W Nord Pod is compatible with Nord coil series
4ml Nord 50W RPM Pod is compatible with RPM coil series(sold separately)
Atomizer recognition
Lithium-ion protection
Low voltage warning
8s cut-off
Over-temperature protection
Short circuit protection

Packages:
1* Nord 50W Device (1 800mAh)
1* Nord 50W LP2 Pod (LP2 Meshed 0.23Q DL Coil Preinstalled) (4ml)
1* Nord 50W Nord Pod (Nord Regular DC 0.6Q Coil Preinstalled) (4.5ml)
1* Type-C Cable
1* User Manual

Nord 50W Kit sets new standards for NORD series. With a variety of colors and premium textures, SMOK Nord 50W Pod Kit delivers an iconic impact on the classic appearance. Nord 50W Pod System Kit features internal 1800mAh battery to bring you 50W max output. The air intakes on both sides can be adjusted by moving the air switch on the back of the device. The kit includes two versatile pods that work perfectly with the upgraded airflow system to deliver scrumptious flavor and massive vapor. Three refillable pods of 4ml (Nord 50W LP2 Pod), 4.5ml (Nord 50W nord Pod), and 4ml (Nord 50W RPM Pod, sold separately) bring you delightful puffs. Regular Series and Leather Series are available here.

SMOK Nord 50W Kit Giveaway , 1 winner, ends on August 3rd

Enter here

Finally this year, we are having a new member of the famouse Nord series from SMOK. Compatible with LP2, Nord and RPM coils to meet your different needs. Let's check it out.

The new Nord 50W sets new standards for the nord series with an internal 1800mAh battery bringing you up to 50W of power to your satisfaction.



Main Features:
1. Translucent cartridge, side filling system, with two-side adjustable airflow
2. Nord 50W LP2/Nord/RPM Cartridge, compatible with LP2/Nord/RPM series of Coils
3. 1800mAh built-in battery, output power 5-50W
4. Adopting in-mould labeling technique(IML Series) & premium leather pattern(Leather Series)

Size: 31 x 22.6 x 97mm(IML Series)
32 x 23.9 x 98mm(Leather Series)
E-juice Capacity: 4ml/2ml(TPD/UK) (Nord 50W LP2 Pod)
4.5ml/2ml(TPD/UK) (Nord 50W Nord Pod)

Please note that LP2&Nord Cartridge are included in the package, for RPM Cartridge we should buy it separately.


Learn More: (login first to check better wholesale price)
SMOK NORD 50W

Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about SMOK wholesale or any vape wholesale in China, feel free to contact us.

Discover the Lost Vape URSA Mini 30W Pod Kit, featuring a 1200mAh battery, 5-30W output range, and utilizes coils from the Lost Vape UB Lite Series. Constructed from durable zinc-alloy, the URSA Mini is a compact portable pod system, offering compatibility with the UB Lite Coil Series. Below the magnetic pod sits a dual slotted airflow control ring to deliver a controlled flow of air to the center of the coil. Outputting between 5-30W, the URSA Mini Pod Kit makes full use of the 1200mAh battery to deliver outstanding vapor and flavor.




Features:
1. Well made and superb design⁠
2. Vibrant choices available⁠
3. Tiny, lightweight, elegant⁠
4. Fully adjustable airflow control⁠
5. Max 30W output⁠
6. Built-in 1200mAh battery⁠
7. Type-C fast charging⁠
8. Ultrasensitive magnet connection⁠
9. UB Lite coils compatible⁠
10. Smart coil detection⁠
...

Click here for more:

Ursa Mini Kit: Lost Vape Ursa Mini Pod Kit

Hey guys. Today I'm gonna introduce the Lost Vape Ursa Mini Kit. It looks very like the Ursa Quest Multi, so what's the difference between them? Let's dive in for more details.

The Ursa Mini Pod Kit's maximum output power can be up to 30w, and it has a 0.69-inch adjustable display screen, allowing you to adjust your favorite power and perfect flavor. Simultaneously, it has four holes to adjust the airflow. In addition, even if it is a mini kit, it has a built-in battery of 1200mAh, which is convenient to carry and can also meet the power demand of the whole day.

When you replace a new atomizer, the Ursa Mini can automatically identify the resistance of the new atomizer and display it on the display screen in time. What's more, it uses a strong zinc alloy shell, shining with the metallic luster of the shell, and eight colors for you to choose, making the whole Ursa Mini Kit by Lost Vape more high-end and tasteful. As a mini kit, its extreme lightness is reflected in that it can be stuffed into the pocket at will, and you can't feel its weight.

Check for more details here: Lost Vape Ursa Mini Pod Kit 1200mAh 30W

You may also like:
geekvape g18 review
cheap obelisk 200 mod

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This cell is a great performer and its 10A rating seems reasonable. Its capacity rating is a bit exaggerated though. It performs a little better than the Sanyo NCR18650GA down to about 3.0V. If you are running down to a lower voltage than that the NCR18650GA might run for a bit longer.

The Vapcell F34 and Sanyo NCR18650GA run at about the same temperature. I do not know how this Vapcell’s cycle life compares to the long-lasting Sanyo NCR18650GA.

The 20A max rating is undefined and useless, ignore it.

The two cells I tested delivered 3348mAh and 3352mAh. This is great consistency but is below this cell’s 3400mAh rating. Since I cannot have the lowest capacity cells in the batch I am rating these 3300mAh.

Two cells were donated for testing by Vapcell (18650 batteries, Vapcell batteries, 18650 Chargers). Thank you!


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

Hi,

I have been using Samsung 25 flat tops and AW button tops. They are about 4 years old now and still seem to be ok but I would like to replace them.

Unfortunately there is very little availability. I actually need button top batteries now and I can't find any high discharge ones.

I am an old school vaper using a protank4, vaping at max 23 watts on a .5 to .6 ohm coil with a single 18650, so it's a pretty tame setup.

Can I use one of the high capacity low drain batteries?

Can someone throw at a few battery models that would suit my needs so I can see if I can find them?

Thanks for your help.
Regards Animal Vapist

FreeMax Marvos 60W Kit

Thanks Freemax for sending me the product for free in exchange for my honest evaluation.
Marvos 60W Kit | Freemax - Taste the Clouds, Feel the Flavors!

Freemax almost simultaneously with the device named Marvos T 80W 3200mAh sent me the Tri-Proof Marvos 60W All in One kit. More advanced in shapes, with the adoption of a large 0.96 "color screen and an integrated battery with a capacity of 2.000mAh. The coils used always belong to the performing Ms line with FM COILTECH4.0 technology directly inspired by the various Fireluke tanks of Freemax.

These are the Highlights of the presentation of the new product by FreeMax:
• Pod mod kit with military Tri-Proof technology
• Sliding airflow control
• 0.96 inch TFT screen
• Three output modes: Power, Smart, Bypass
• Compatible with the MS Mesh Coil series
• Uses FM COILTECH4.0 technology
• Built-in 2000 mAh battery with 2A type C fast charging
• Drip tip 810 anti spitting
• 4.5ml Pod Marvos DTL
• Smart FM chip with 0.001 second accelerated ignition
Enjoy the reading.



FreeMax Marvos 60W Packaging:
Shenzhen FreeMax Technology Co., LTD packaging features front; The brand (FreeMax), an image of the kit, the name of the kit (Marvos 60W), the indication on the color of this Sample (Gunmetal), a "Tri-proof" icon, a logo to indicate the link with the Tanks of the Fireluke line and warnings.

On the back we find this list; product specifications, packing list, manufacturer's address, warnings, brands & logos.

Laterally they are present; the name of the kit, social icons of the brand, a barcode, main features in the form of icons, warnings, scratch & check.



Packing List:
• 1 * Freemax Marvos 60W Mod
• 1 * 4.5ml Freemax Marvos DTL Pod
• 1 * 0.25Ω Freemax MS Mesh Coil
• 1 * 0.35Ω Freemax MS Mesh Coil
• 1 * USB Type-C Charging
• 1 * Warning Card
• 1 * User Manual



Technical data:
• Zinc material: alloy + liquid silicone rubber
• Size: 123.6 * 32.6 * 30.6mm
• Weight: 129g
• Pod capacity: 4.5ml
• Compatible MS Coils: 0.15 / 0.25 / 0.35 / 0.5Ω
• Battery capacity: 2000mAh
• Output voltage: 0.7-4.2V
• Output power: 5W-60W
• Charging: USB Type C
• Screen: 0.96 "color TFT screen



Available colours:
• Black, Blue, Gunmetal, Red.



FreeMax Marvos 60W First impressions:
For this test I got the Gunmetal version of Marvos 60W, it is an All in One Tri-Proof IP67 device (the first of FreeMax with these features). So FreeMax Marvos 60W boasts qualities of resistance to dust, shocks and water. The paint appears sturdy with good quality finishes, the display is beautifully colored, very bright and with enlarged and clearly legible fonts.

I was pleased to find on this device the effective adjustable bilateral AFC already seen on Marvos T80 together with the Pod-Tank with replaceable Drip-Tip 810. Also available separately is a valuable Pod-Tank entirely made of Pyrex glass which can guarantee a better aromatic perception of the liquids it contains.
FreeMax claims the "Glass Pod Tank" option was the first in the world to be made available on the market.

Having had previous and positive test experiences with the various Fireluke Tanks installed on the "technologicals" Mod Maxus (50-100-200W) and with the previous All In One Marvos T80 kit, I am very confident also for this new product.



FreeMax Marvos 60W Feeling:
The dimensions of this kit are not particularly small, but this is normal because you have to take into account the IP67 coating and its thick armor. However, the handling is really good thanks to an octagonal shape that is not excessively elongated, the grip is comfortable and ergonomic. The weight is contained in just 129g thanks to the construction of the frame in light aluminum alloy. Liquid silicone rubber (as it is defined) is of the "soft" type but not too much as the name would suggest. Marvos transmits a good texture and a good grip thanks to this material and the numerous engravings on its surface.



FreeMax Marvos 60W Front / Rear View:
The completely transparent Pod is quite bulky but in the overall view the device appears well proportioned.

Going down (from above) on the front side we see the small and unobtrusive wording "FreeMax". The Fire key is slightly protruding and seems to be made of plastic material, however it does not produce any annoying noise it is precise and easy to click.

The screen and the "Up and Down" adjustment buttons are immersed in "liquid silicone". The display shows all the information useful for vaping; graphic level of residual charge, set mode, set power, adjustment lock / unlock symbol (padlock), Volt, Ohm, puff counter, duration of the last puff and indication of the 5 background colors available for the display.
The underlying USB-C port is protected by a sturdy cap for its waterproofness.

In the upper part of the rear area there is the two-way AFC control mechanism. The knob protrudes and is made of sturdy metal, its excursion guarantees a precise adjustment that remains firm in the chosen position. Below we find the inscription Marvos above a satin plate with pleasant bronze reflections.



FreeMax Marvos 60W Side View:
On the side Marvos is almost completely covered and protected. The "liquid silicone" is engraved with five ergonomic grooves on each side and is delimited by border lines of a brighter color.
The two opposing slots for the passage of air towards the coil are completely partializable for the RDL / DL vape and measure 11x3mm each.

Quit 2 years ago so this stuff might be outdated but in mainly mint condition

Price....obviously not able to price it as there is so much stuff...no idea how to proceed really.

Lets say for sake of not breaking rules....1k for everything +shipping.

Got more detailed pics of the tables if need be

The VapingGT GT EPIPE Kit is a unique design epipe vape, comes with 900 mah battery, with PCTG+ Resin material, atomizer is 2.8ml capacity with resistance 0.5ohm.


The Kamry GT Epipe Vape Mod Kit is constructed by the Kamry GT Epipe Mod and Kamry GT E-Pipe Tank Atomizer.
Easy to assemble the mod and the atomizer to form the Kamry VapingGT GT EPIPE with magnetic suction connection.




Features:
One button to start, ne hand to control
GT-Epipe pipe mod with one button design, you can operate it with one hand easily and flexibly
Resin wood color Pipe-style pod system sleek and Elegant, environmentally friendly and natural Button operation, saving energy and power
Product material: PCTG + Resin
Battery capacity: 900mAh
Output power: 5~40W
Capacity of atomizer:2.8ml
Atomizer core resistance: 0.2~2.0ohm



Quick links to view product details as below:

Kamry Epipe GT Kit >> https://www.3fvape.com/50966-kamry-epipe-GT-kit.html

Kamry Epipe GT Mod >> https://www.3fvape.com/50965-kamry-gt-epipe-mod.html

Kamry GT E-Pipe Tank Atomizer >> https://www.3fvape.com/50964-kamry-gt-e-pipe-tank-atomizer.html

Kamry GT Epipe Coil Head >> https://www.3fvape.com/50963-kamry-gt-epipe-coil-head.html

So I have been vaping since 2010, and still use my original REO's with a RBA. Back in the day, I would gift a new vaper with an ego to get them started because it was cheap, simple, and had just enough battery life to not have to recharge constantly. Also, it was easy to switch out attys and try different flavors without worrying about leaky tanks.

I met a young man who smokes 2 packs a day menthol, and is really open to switching. I have a pretty good supply of various flavors of 24mg 80pg/20vg liquid. What can I get him that will make it easy for him to start now (and isn't beyond my ability to help)?

Today,I wanna itroduce the Yocan Armor Plus Wax Pen Kit uk for you.It looks slim and elegant,easy to grip and put in your pocket.How does it work?Let's check it out.

Armor Plus Vaporizer uk cheap is an updated version of Armor Wax Pen. Yocan Armor Plus increases the battery size up to 650mAh and is slightly bigger than the original. It uses Micro-USB charging for convenient charging even on the go. The variable voltage settings have been set at 3.4V, 3.8V, and 4.2V. The voltage level is indicated by the 3 blue LED lights above the button.

The pen comes with the QTC Coil(Quartz Tri Coil) and QDC CoIL(Quartz Dual Coil), the QTC Coil produces giant clouds and hits, perfects for cloud chasers. The QDC Coil provides you with the purest experience, guarantees a clean and smooth essence. QDC Coil and QTC Coil are included, get Armor Plus Kit for strong and smooth hits!

Please click best online vape store to learn more details.

SPECIFICATION
Dimensions:117*16mm
Voltage Range3.4-3.8-4.2v
Battery Capacity:Built-in 650mAh Battery
Coil:QTC Coil And QDC Coil Included
ChargingMicro USB Port
ColorBlack, Silver, Green, Rose Gold, Red, Royal Blue

Quick Link:Yocan Armor Plus Wax Pen Kit 650mAh

Kamry GT ePipe Kit

GT ePipe Kit is combined with GT ePipe Mod and GT ePipe Atomizer. The Kit is made of PCTG and Resin for durability. Kamry GT ePipe Mod comes with built-in 900mAh battery, the chip would provide multiple protections for longer life-span. Featuring one button design, it is easy and flexible to operate the kit. With magnetic suction connection, 2.8ml GT ePipe Atomizer is easy to use and assemble. The two airflow hole and Resin mouthpiece guarantee wonderful vaping experience. Kamry GT ePipe Tank Atomizer is compatible with 0.5ohm GT ePipe coil.

Details:

Size: 54*104.5*42mm
Material: PCTG & Resin
Capacity: 2.8ml
Battery: Built-in 900mAh
Resistance: 0.2~2.0ohm
Output Power： 5-40W
Color： Wood Grain





Steam Crave Mini Robot Tube Mod

Mini Robot Tube can work with single 18650 battery, supports 3 adjustable output: 3.5V, 3.8V and 4.2V max power. It is made of full stainless, comes with engraving and corrosion craftmanship, which make Mini Robot Combo more exquisite. It is equipped with a proprietary waterproofed chipset to protect Mini Robot Combo from leaking e-juice or those that are prone to accidents.

Details:

1. 3 adjustable output: 3.5V, 3.8V and 4.2V max power
2. Made of full stainless steel
3. With CNC engraving and corrosion craftsmanship
4. Supports single 18650 battery
5. LED light indicator, with waterproof chipset
6. Multiple protection: Over Temperature/Battery Reverse/Low Resistance/Over-current/Short Circuit/Low Battery/10s Over Time Protection





GeekVape Obelisk C Cerberus Tank

Obelisk C Tank is the incredible Cerberus Sub Ohm Tank with 25mm base diameter. Designed with an adjustable tri-slotted bottom airflow ring to control the inflow of air, it will create thicker vapor or richer flavor production. The knurled and threaded top cap design makes top filling system leak-proof and convenient. Obelisk C Tank has 5.5ml capacity with a bubble glass tube or 4ml capacity with a regular glass tube. There are new GeekVape S Series Coil for Obelisk C Tank: single mesh 0.15ohm coil (40-55W), and dual mesh 0.25ohm coil (80-90W).

Details:

1. Tri-boosting flavor
2. 25mm base diameter tank
3. Tri-slotted bottom AFC ring
4. Adjustable airflow, top filling system
5. 5.5ml/4ml e-juice capacity
6. Adopts new GeekVape S series coil