So I was checking my Zeus x rta and the positive pin is protruding a lot like 1.5mm but on my destiny rta and hellvape md for example the pin is barely protruding on both of those and I have seen many people use those attys on mechs but I was thinking...
Could there be a short like an arc cause the positive isn't protruding very much???
Should I try maybe make the pin stick out more before use in a mech?
Do u guys ever had attys like those that the positive is not protruding very much???

Have you seen any other funny shape devices as well?

Steam Crave Hadron Pro Combo Kit consists of a Hadron Pro DNA 250C Mod with Li-Po 4s battery pack, and an Aromamizer Ragnar RDTA. The side part of the Mod exudes a simple and elegant atmosphere, while the front is perfectly presented with a large display and operating elements. Hadron Pro Mod does not provide 18650 or 21700 batteries as a special feature but is equipped with FullyMax's powerful Li-Po(lithium polymer) 4s battery pack, through which an incredible 400W output power can be achieved. The FullyMax 4s 1600mAh 30C battery pack provides an unprecedented experience with good safety performance. It can even handle peak loads of 30C, and the perfect combination of long service life and high energy density makes Hadron Pro Mod an unprecedented performance improvement. This makes Hadron Pro Mod a true pioneer of the new atomization era. Inside the Hadron Pro Mod, Evolv's DNA 250C chipset has many functions and convenient operations, ensuring that even demanding vapers are worth the money. In addition to the classic vapor mode (VW, VV, bypass) and temperature-controlled vapor mode (TC, TCR), the chip also provides other functions, such as creating your own performance curve, individual preheat settings, and boost function or temporary protection. And with advanced Replay Mode: Capture the flavor and satisfaction of the perfect puff, and provide the same level of performance and consistency for all subsequent puffs.

Steam Crave Aromamizer Ragnar RDTA, constructed of SS & Glass, is a self-winding tank with 35mm diameter and 18ml capacity. Steam Crave Aromamizer Ragnar features adjustable smooth bottom and side airflow for medium or high power vaping(80% side airflow and 20% bottom airflow). Aromamizer Ragnar adopts postless deck with bottom honeycomb air holes. Aromamizer Ragnar RDTA is compatible with Steam Crave Aromamizer plus decks for different DIY fun due to chamber reducer.


Quick Links:
Steam Crave Hadron Pro DNA250C Mod
Steam Crave Aromamizer Ragnar RDTA
Steam Crave Aromamizer Ragnar RDTA Advanced Kit
Steam Crave Aromamizer Ragnar RDTA Advanced Kit Limited Version

-----------------------------------------
Free Shipping vape devices
New Arrivals
Clearance
Daily Deals
Box Mods
IN STOCK VAPE DEVICES
$0.01-$19.99 Cheap Deals
Coupon Codes

Vapefly Galaxies 30W Starter Kit, a pocket-size kit with texture for easy holding, consists of Vapefly Galaxies 30W Mod and Galaxies Air Tank. Vapefly Galaxies 30W mod features Shockproof, Dustproof and waterproof and bright monochrome display. Vapefly Galaxies box mod is powered by 950mAh built-in battery with 5-30W output. Vapefly Galaxies Air tank comes with 2ml capacity with side filling design. Vapefly Galaxies Air has 0.8ohm/ 1.2ohm Vapefly FreeCore G-Series Coil with adjustable bottom airflow for MTL and DL vaping.


Parameters:
Mod Size: 24.75* 34.88* 54.3mm
Tank Size: 38.8* 22mm
Battery: built-in 950mAh battery
Output: 5-30W
Modes: VW
Capacity: 2ml
Resistance: 0.8ohm Vapefly FreeCore G-Series Coil
1.2ohm Vapefly FreeCore G-Series Coil

Features:
Shockproof, Dustproof and waterproof (IP67 certificate)
Beginner-friendly handling
Internal 950mah battery, adjustable wattage of 5-30W
Bright monochrome Display
Side filling, simple and safe
Bottom airflow and 510 base
MTL and DL vaping
Deep discharge protection
Short-circuit protection
Overcharge protection
Overheating protectionT
Train time limit


-----------------------------------------
Free Shipping vape devices
New Arrivals
Clearance
Daily Deals
Box Mods
IN STOCK VAPE DEVICES
$0.01-$19.99 Cheap Deals
Coupon Codes

Suorin Air Mod Kit is based on the popular Suorin Air series, In terms of appearance, the Suorin Air Mod uses a zinc alloy frame on one side, which is smooth and durable; On the other side, a translucent and lightweight PCTG cover is used, with internal parts and circuit boards visible. Let you feel the beauty of the future! The compact and slim body contains a lot of energy. The built-in 1500mAh large-capacity battery can last for several days, which is the largest battery capacity in the original Air series. The upgraded Type-C port can speed up the charging speed and extend the service life by 50%, thus providing you with greater power and endurance in all situations. In order to better understand and control your vaping status, the Suorin Air Mod pod kit has added a 0.96-inch display on the side of the PCTG panel. This all-in-one Pod system kit has been upgraded in many ways. The maximum output power is 40W. It utilizes the draw-activated or button-triggered firing system for easy vaping on the go.




Features:
1. Cyborg style, futuristic appearance
2. Recycled PCTG and Zinc Alloy Construction
3. 1500mAh Built-in Battery
4. 3ml Refillable Cartridge
5. Side Filling Design
6. 40W Maximum Output
7. 0.96 inch TFT Display Screen
8. Bottom Type-C Charging Port
9. Draw-Activated/Button Firing
10. Z-shape Blowhole Design
11. 0.6/0.8ohm Subohm Mesh Coils
12. Airflow Adjustment
...

Click here for more:

Suorin Air Mod Kit: Suorin Air Mod Kit 1500mAh 3ml

Congratulations to the fifth anniversary of Steam Crave. Thank you for your continued support. Steam Crave has launched Steam Crave Ragnar and Hadron Combo Pro for you.

Features
Steam Crave Hadron Pro DNA 250C Mod
• Powerful and innovative lithium polymer battery carrier
• Evolv's DNA 250C Chipset
• Watts Boost, Replay Mode, Accurate Temperature Control, Preheat
• Vapor Mode: VW, VV, TC, TCR, Bypass
• Maximum Output 400W

The package includes Steam Crave Hadron 220 MOD, Aromamizer Ragnar RDTA, etc. This makes Hadron Pro Mod a true pioneer of the new atomization era. Inside the Hadron Pro Mod, Evolv's DNA 250C chipset has many functions and convenient operations to ensure that even demanding vapers are worth the money.

Other kits you may prefer:
suorin trident kit in stock
suorin air mod kit in stock

Steam Crave Hadron Pro DNA250C 400W MOD with Ragnar RDTA$249


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop

Both M Pro 2 Sub Ohm Tank originally paired with Maxus 200W Kit and Fireluke 3 Tank for Maxus 100W Kit are widely recognized for refreshing flavors, massive clouds, and coil longevity. M Pro 2 and Fireluke 3 perform better than the best sub ohm tank in the market, so do you know what features make them so outstanding?



1. Both are equipped with military-grade SS904L mesh and Tea Fiber Cotton formula (95% Tea Fiber Cotton plus 5% Organic Cotton), providing users with the best vaping experience which is even better than all the best sub-ohm tanks in the market.

2. Both are with the upgraded top-fill mechanism. M Pro 2 and Fireluke 3 Tank Resin Edition are designed with three steel balls into the top cap to increase friction, while the metal edition of M Pro 2 and Fireluke 3 is designed with Child Resistant Top Fill Design and ISO 8317 Child Resistant Certified.

3. Both have multiple vape coils compatible. Freemax 904L M Series Mesh Coil originally for M Pro 2 and M Pro Series Mesh Coils originally for M Pro Tank can be compatible with either tank of M Pro Series. SS904L X Series Mesh Coils for Fireluke 3 Tank are compatible with Fireluke 2 & Fireluke M tank and vice versa.

Please enter here to know more about Freemax Sub Ohm Tanks>> Tanks | Freemax - Taste the Clouds, Feel the Flavors!

After the release of Vozol Bar, a 1000 puffs disposable kit, Vozol keep released the 500 puffs one and 800 puffs one with more affordable price. They are Vozol Bar 500 & Vozol Bar 800.



Main Features:
1. Food-grade independent liquid container,healthier for users
2. Circular tube with gradient color,ergonomic mouthpiece
3. 400mAh built-in battery,about 500 puffs' vaping - Bar 500
550mAh built-in battery, about 800 puffs' vaping - Bar 800
4. Support OEM,MOQ:3000 units per flavor,at least 5 flavors
5. Perfect and pure flavor with strong throat hit.

Flavor: Pineapple Ice,Lychee Ice,Iced Mango, Grape Ice,Strawberry Ice Cream,Blue Razz Ice,Orange Soda,Refreshing Mint,Lush Ice,Banana Ice


ElegoMall provides the most compatitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about any vape wholesale in China, feel free to contact us.

Hello, So I recently bought a caliburng, I've got a usb-c cable. What power adapter can I use it with, can I use it with an iPhone power adapter? or?

Hey guys. Today let's look at another new disposable vape named FIZZ Max. It is perfect for those looking for a quality disposable device that lasts longer and still maintains that quality flavor. Here we go!

FIZZ Max is designed to provide vapers with long-lasting satisfaction with a massive 3000 puffs before disposal. The device is powered by an integrated non-rechargeable large-capacity battery and is equipped with a round shape plastic mouthpiece that drawing smoothly to achieve an MTL vape. Each FIZZ Max features a 10mL vape juice capacity and provides 5% prefilled nic salt to cater to your everyday quick vape fix wherever you go.

It is sweet, long-lasting, and not dry like some other products tend to be after using them for a while. Delivering loads of delicious flavor in every disposable pod, your tastes experience a wonderland of fruits, beverages, candy. Long-lasting service life, excellent comfort, and attractive vape juice flavors are all in one device. Fully disposable design, no oil refill, no build, no adjustment, zero maintenance required! Vape on a satisfying flavor never been so easy!

Check for more details here: FIZZ Max Disposable Vape Kit 3000 Puffs 10ml

You may also like:
hyppe max flow price
big bar duo buy

Welcome to the topic of New Product Introduction at 3fvape.com

Today we gonna talk about 5AVape Aston RDA Clone(Replica), a single Coil MTL BF Squonk rebuildable dripping vape atomizer in 22mm diameter, compatible with most Bottom Feeder BF Squonker with 510 threading connection.

5AVape Aston Clone RDA, as a low profile flavor oriented dripper in 22mm diameter, is very easy to use. The Squonk BF RDA is constructed from 316 stainless steel. The coil is positioned perfectly against asymmetrical airflows. Cotton will be comfortably installed and will take time to swell for optimal nutrition. With 810 drip tip, 5AVape Aston Clone RDA features the sweetness of the airflow and the volume of steam, thus enabling to make the flavors of your e-liquids multiply tenfold.

510 threading connection
Diameter: 22mm
Material: 316L stainless steel
Drip Tip: 810
Airflow: Configurable side
Deep pool
Single coil deck
Comes with Squonk / BF / Bottom Feeder Pin

More details about 5AVape Aston Clone RDA BF Squonk Rebuildable Dripping Vape Atomizer, Please Check >> https://www.3fvape.com/49723-5avape-aston-style-rda-bf-squonk-rebuildable-dripping-vape-atomizer.html

Are you looking for a vape that can fire fast?You can take a look for Suorin Trident Pod Mod Kit Uk. It's as fast as any other device.It is also excellent for other functions.Let's check it out.

Check out the Suorin Trio85 85W Pod Mod Kit Uk, featuring a 5-85W range, 5mL pod capacity, and can be used with a series of coils to produce exquisite vapor. Constructed from durable zinc-alloy, the chassis of the Suorin Trio85 lends protection to the ORI chipset within, encasing a single high-amp 18650 battery. At the top is a 5mL refillable pod, offering a bottom-fill system, stoppered by a silicone plug.

Accepting a 0.4ohm TRI Single Mesh Coil or 0.2ohm TRI Triple Mesh Coil, the Trio85 is focused on pumping out delicious flavored vapor, without sacrificing performance and longevity. Offering a bottom coil airflow adjustment, the Trio85 is extremely versatile, but maintains a constant voltage output, so as the battery drains, the output remains the same and constant for a better vaping experience.Please go to UK Vape Shop Online, Best E-Cigs & E-Liquids Store to visit.

SPECIFICATION
Size:120mm(Height) x 34.6mm(Width) x 31.2mm(Depth)
Weight:114g(Without 18650 Battery)
Material:Zinc Alloy + Plastic
Battery:Replaceable 18650 Battery
Charging Time:2H (charging with Trident)
Output Wattage:5-85W
Working Voltage:3.3-4.2V
Charging Interface:Type-C
Charging Current:1.0A
Cartridge Capacity:4.4ml
Filling Method:Bottom Filling
Coil Resistance:TRI Single Mesh 0.2Ω 0.4Ω 0.6Ω
TRI Triple Mesh 0.2Ω
TRI RBA (optional)
Colors: Silver, Gunmetal, Blue, Black Green, Lively Green, Rainbow, Red

Quick Link:Suorin Trident Pod Mod Kit 85W

Hi so i grabbed a Juul from the gas station and plugged the charger into my pc , and so it was blinking when i put it on the charger, and it was on maybe an hour or so until it got solid light. But when i took it off , i noticed it was a little warm to the touch which surprised me a bit. Just wondering if anyone seen this or if this could some kind of issue. Thanks for any help

Hello dedicated readers. Today I have the pleasure of presenting to you the latest and greatest kit from Geekvape. Yes, it’s the new and improved Geekvape Aegis Legend 2 as it’s commonly being referred to but on the Geekvape website it is being called the L200 but then says Legend 2 below so I’m going to stick with calling it the Legend 2. Included with the Legend 2 is the Z Sub ohm 2021 which initially appears very similar to the original Zeus sub ohm tank but has a few changes. The kit was sent to me to provide a fair and honest review so let’s get to it.




WHAT’S IN THE BOX?

1* GeekVape Aegis Legend 2 Mod
1* Geekvape Z Sub Ohm 2021 Tank (5.5ml)
1* GeekVape Z 0.2ohm Coil 70-80W (pre-installed)
1* GeekVape Z 0.25ohm Coil 45-57W
1* Coil Tool
1* Spare Parts Pack
1* Spare Glass Tube (5.5ml)
1* USB-C Cable







FEATURES:

• 1. The 2nd generation of Geekvape tri-proof technology
• 2. From IP67 to IP68 rating water-resistance and dust-resistance
• 3. External dual 18650 batteries with 200W power output
• 4. Accidental press protection
• 5. 1.08 inch full screen display
• 6. Smaller & lighter, compact and comfortable
• 7. Wide working temperature range
• 8. The new A-Lock makes Legend 2 safer to carry
• 9. Charging port with flipping cover for easier charging
• 10. Paired with Geekvape Z Sub Ohm 2021 Tank
• 11. Leakproof top airflow system
• 12. Compatible with Geekvape Z Series Coil
• 13. Adjustable airflow, larger air slots

INITIAL THOUGHTS:

I think I mentioned this on my Z Max review but I am thoroughly pleased with the new packaging from Geekvape. Once opened, there is an orange flap that lifts to expose the contents of the kit. It’s not necessary but is a nice plus in my opinion that they care to make the experience of opening their kits just a little bit special. I won’t waste time listing the contents of the kit since you can easily see what’s included in the picture above.

I did like the original Aegis Legend but for me it was always a little bit big and bulky. The Legend 2 is 15% smaller and 30% lighter which made a huge difference for me in hand feel. The rubberized coating that enclosed the original is no longer on the new Legend 2. There is a little on the top under the 510 plate and covering the USB-C charging port on top along with a single layer on the bottom of the battery door. The Legend 2 has a gold plated spring loaded 510 pin and will fit a 26mm tank and easily fits the new Z tank 2021 at 24.5mm on the base. I simply love the appearance as well as the design of the new Legend 2. There is a rubberized cover on the top that exposes the USB-C charging port. It’s a nice soft rubber and easily goes back into place. I’ve experienced other mods where the charging port cover is stiff and is either hard to close or doesn’t want to stay in place. The mod has Geekvape stamped on one side. The same side also contains my favorite feature of the new Legend. Geekvape is calling it the A- Lock. It is a sliding switch that allows the user to lock or unlock the entire mod without having to do a sequence of button presses. Simply slide it down to lock the device or slide it up to unlock and the display shows you that it is locked or unlocked when you slide the switch. On the opposite side Aegis is stamped in the side. The battery door on the Legend 2 is easy to open and close but also feels very solid with the rubber coating on the bottom. The inside of the unit is marked with the battery polarity as well as the battery door itself being marked.

The display on the Legend 2 is 1.08” in size and seems the same as other Geekvape mods I’ve used. At the top is the mode followed by two separate battery indicators which I like very much that you can monitor the batteries separately. Continuing downward is the set wattage, resistance, amps, volts, and puff counter.

The operation of the Legend 2 is as follows:

- Press the fire button five times to turn the device on and off

- Press the fire button to enter the menu system and the mode will be highlighted then use the + or – button to scroll through the modes of operation

- Once in the menu, press the fire button once more to scroll down to settings where the puff counter can be reset by pressing the + button

- Once in the menu, press the + and – buttons simultaneously to change the color of the display

- Press the fire button and the + or – button to increase or decrease the screen brightness








The new Z Tank 2021 has a few improvements when compared to the original Z tank but still uses the Z coils. The coils included are the .2 ohm dual coil rated at 70-80 watts and one I haven’t tried before now is the .25 ohm coil rated from 45-57 watts. I greatly appreciated that Geekvape decided to include a coil for the mid-range users.

The flavor from the .2 coil was phenomenal to the point where I would call it intense. I was using a 3mg ry4 cream recipe in it and there was no way I could get up to the 70-80 watt recommendation. The vapor was so much and so dense that if I went much past the mid 50’s then it would make me cough. The .25 coil was like night and day compared to the .2 dual coil as far as airflow. When I first tried the .25 coil, I thought maybe I put it in wrong. Even with the airflow wide open and at 45 watts it was a fairly warm and somewhat restricted DTL.

The new Z Tank has larger openings for the airflow and the fill ports which allows the use of just about any bottle to fill it. I was even able to insert the tip of a glass 60ml dropper which doesn’t fit in most fill ports. The base also has been changed some to make better connection to the coils. The logo on the barrel of the tank is different also and the tank base has “subohm 2 tank” and geekvape on the bottom.

The airflow on this tank comes in from the ports on the top, travels downward, and comes up under the coil to provide better flavor production. I did have one complaint on the tank that I received for the review. When I initially took the tank apart to clean it and again when I cleaned it to change flavors for the second col, the airflow control ring fell off in my sink. Evidently the o ring that is supposed to hold it in place is not big enough. I almost lost the ring down the drain. Once the top cap is installed then the airflow ring moves smoothly and there is a positive stop.





FINAL THOUGHTS:

I very much enjoyed testing the new Geekvape Legend 2 kit with the new Z Tank 2021 sub ohm tank. I honestly have zero complaints on the mod. I think that by making the mod lighter and smaller that it will appeal to a wider group of people. I simply love the A-Lock slide button on the side that locks and unlocks the mod. It may seem like a simple thing but in my opinion sets it apart from other mods. The interface is similar to other Geekvape mods but figure why change something that works. The padded leather and stitching in my opinion are very well done.

The new Z tank 2021 is really a good flavor and vapor producer. I sometimes get tired of review kits that include two high output coils with the tank and very much appreciate that Geekvape included the .25 coil for folks like myself that tend to stick to what I consider to be a medium output range. My only complaint on the whole kit is that the airflow ring falls of when the top cap is removed and the tank is inverted. I would hope that a larger o ring is used on production models.

You probably already know the answer to this but would I recommend the Legend 2 kit? Absolutely! I even have a blue one on order already. I would like to than Allison(our new Geekvape rep on ECF) and of course Geekvape for sending the Geekvape Legend 2 kit for this review. You might be getting tired of me saying this but a great big thanks to you the readers. Below is a link to the Geekvape site if you’d like to take a closer look for yourself.


Geekvape L200

Just picked up vaping to help with quitting another bad habit, however with a little twist...I used to dip, but I'm vaping to keep my nicotine fits to a minimum. So far it's working out well as I've been 3 days without dipping. I think I'm addicted to the flavors more than the nicotine at this point. Anyway, I have millions of questions so I'm going to go do some thread hopping! Thanks for being here for us noobs!

Got a couple cruisers in a sale and the bell cap was thrashed and only one stock cap was included. Anyone got old caps rolling around in drawer they want to sell? Prefer black, ultem, black ultem, metals. Will consider exotics if the price isn't what you paid lol.

Hey everyone! I normally use 3mg liquid for dtl. I was wondering what would be a good level for mtl in an aspire nautilus gt mini?

Just got a couple for my Provari Radisus to make thing a tiny bit easier. Just install the mini usb adaptors and leave em in, then the charger cable just snaps to that. Easy peasy. I also use it for my phone.

Just picked this up yesterday. Wanted a single coil rta to play around with so this is my first. Been using a dual coil VV pyro mainly so this single coil stuff is very new to me. Any tips on ohm coils, wattage and wicking would be much appreciated. I can't seem to get it right. 5 wrap at .25 and getting dry hits like crazy.

What batteries to buy for my uwell crown 4 tank whit the vaporesso gen x mod?
I been looking at the LG 18650HE2 2500MAH IMR 20 as this are in the store in my country are there any other recomendated batteries out there? And what do you guys think about the LG HE2 to my setup? but are there any differences since i need 2 batteries in the mod because all recomendations i see dosent appael to either there is 1 or 2 batteries for vaping at 60-70watts.
I Did a mistake and took som batteries from the store i ordered the vape from and There are 2 batteries of Efest, IMR18650, 3000mAh 35A and
2 batteries of Efest 25EF 18650 2500mAh 25A
I havent got the mod or the tank yet but are this last 2 battery types ok to use for a uwell crown 4 whit me vaping at 50-70watts i think considering there brand New, or should i not use them at all?

What batteries to buy for my uwell crown 4 tank whit the vaporesso gen x mod?
I been looking at the LG 18650HE2 2500MAH IMR 20 as this are in the store in my country but are there any differences since i need 2 batteries in the mod because alle recomendations i see dosent appael to either there is 1 or 2 batteries for vaping at 60-70watts.
I Did a mistake and took som batteries from the store i ordered the vape from and There are Efest, IMR18650, 3000mAh 35A and
Efest 25EF 18650 2500mAh 25A
I havet got the mod yet but are this last 2 battery types ok to use for a uwell crown 4 whit vaping at 50-70watts i think.

Aspire Rhea 200W Shock Proof Box Mod

Aspirecigs kindly sent me their latest Mod with dual 18650 cell in exchange for my opinion. Rhea Mod is described as "an unbeatable shockproof construction with a futuristic design".
Enjoy the reading...



Packaging:
The classic white / orange box presents on the front the image of the device, the brand (Aspire), an adhesive stamp with the color, the product name (Rhea 200 Mod) and the inspiring motif of Aspire "Innovate The. Way You Vape ".

On the back side we find; a brief mention on Aspire's activities in the world of vaping, the contents of the package, some warnings, the address of Shenzhen Eigate Technology Co, Ltd, finally in the form of icons the social groups of the brand.



The name of the product and the color of the sample in question are repeated on the sides of the box. We also find; a batch number, scratch and check, logos and legal marks in the form of icons.



The kit includes:
1 * Rhea Mod (batteries not included)
1 * Type-C Cable
1 * User Manual



Technical data:
Dimensions: 89x47x38mm
Weight: 208g
Material: zinc alloy, shockproof rubber, alcantara
Battery: dual 18650 battery (batteries not included)
Screen: 0.96 "TFT color screen
Output power: 1-200W
Output voltage range: 0.5-9.0V
Output modes: Watt, Voltage, Bypass, Tc, Tcr, Cps
Temperature range: 200-600 ℉ / 100-315 ℃
Range Coil support: 0.1-3.5Ω
Type-C 2A charging port



Available colours:
Rhea Mod is available with different finishes, with "leather" or "alcantara" handles, the "Granite Gray" version was sent to me for this test, which has a completely black structure with gray leather inserts.



First impressions:

Aspire Rhea is Aspire's first shockproof Mod. This new release is an elegant combination of various materials such as; leather, shockproof rubber and metal. The perimeter of the Mod is surrounded by "sides" in shockproof rubber that protect it from accidental falls, perhaps from this detail derives the "Gundam Designe" to which Aspire refers in its presentation of the product.



Feeling:
Rhea Mod with the cells inserted reaches a weight of almost 300g which is not a little, but thanks to the balanced center of gravity, the dimensions contained in height, and the classic triangle form factor, it is ergonomic in the handle, the mod is firmly anchored to the hand with its protruding bumpers.



Gundam Design:
The zinc alloy armor covers most of the mod, the protruding rubber "bumpers" protect the display from accidental falls, the front control panel incorporates the Fire button at the top, the color display with horizontal reading in the center and below the Up / Down / Mode, with the Type-C charging socket.

On the back the armor has a double central spar joined in the center and screwed to the mod via 6 Torx screws which leaves a large part of the leather insert exposed to the touch.



The side view of Rhea Mod highlights the leather or imitation leather insert in the center, the rubber bumpers, the Torx fixing screws and the Rhea & Aspire lettering one on each side.

Suorin Air Mod 40W Pod Kit 1500mAh


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop