Threads
-
Locked
VapX Meteor Mod Review
- By SP013
- Device Reviews
- 0 Replies
Hello,
Another review, this time an interesting one about the VapX Meteor mod. Its the newest box mod by VapX that has two very interesting features, IP68 rating and a charging dock that allows you to fully charges the device in 11 minutes.
Thank you Clay from VapX for sending me this box mod and charging dock!
Specifications:
Packaging:
- Meteor Mod
- User manual
- USB-C cable
In docking station packaging, just the docking station
Review:
Its a tiny but nicely looking mod, Aegis like. Nicely stitched leather gives it a nice grip. Overall quality is very proper, does not feel cheap. Branding is not bad, just the arrows down on the side of the mod (under the fire-button) were not really needed in my opinion. The writing VapX on the side looks nice and has a rainbowish shine to it while moving the device.
It is shock, dust and IP68 rated. This is the first IP68 rated mod I can think of. Is there much difference with IP67? The answer is no. Difference is that IP68 can go deeper into the water than IP67, but still for the same time of 30 minutes. IP67 can be submerged into the water for 30 minutes till a depth of 0.5m, while IP68 can go deeper up to 1.5m. On VapX website it says it can go as deep as 8 meters, but I doubt that is for a long period of time. Quite a big difference and gives more protection, but in general mods are not made to swim with.
It can take a 28mm tank without overhang which is good. Not sure why they embedded the 510-connector, it can look a bit funny with a smaller tank. On the bottom of the device you fill find the connectors pins that connect with the charging dock (sold separately).
Very nice buttons, especially like the fire-button a lot. It is quite big and has a nice restrictive click to it. The navigation buttons on the side also work well, click nice and do not rattle.
Its an internal battery mod. 2000mAh is not impressive, but OK for the size of the mod. There are two charging methods; by USB-C through the sealed USB port or by dropping it 'like a Meteor' onto the charging station. It connects well with the station, and on the device is a tiny arrow design to show which way to put it. Charging station itself is very light, which means that you cannot just pull of your device as the charging station goes with it. To disconnect you need to hold the station.
Charging through regular cable takes around 45-50 minutes, which is quite fast already.
Station is reliant on the charging adapter, which is not included, which I think should have been. With a 16W phone charger it takes about 20 minutes for a full charge, to be able to charge within 12 minutes (did not charge within 10 as advertised) you will need a 30W+ charging adapter (USB-C laptops have those for example). The idea is really great and the way the mod connects to the station is a pleasure to see, but as mentioned, an adapter should have been included. Still it charges so much faster than other mod, so only thumbs up on the station. When a lower output adapter is connected it says ‘Fast Charging’ on the screen, when a 30W+ adapter is connected it says ‘Super Charging’.
You are not able to vape while charging, which makes sense for the station, but I like to be able to vape while charging through cable. Even though it might be convenient to after every vape drop the mod on the station, I do not suggest doing so. Batteries also have a stress level and charging it every time you take a vape might shorten the battery life.
Screen is nice and vibrant, but not theme/color adjustable. It is possible to adjust the brightness which is always nice.
It is really nice the screen and navigation buttons are on the side in my opinion. It is simply comfortable to navigate this way, hard to explain.
If its about the chipset, reminds me very much of the Aegis, also navigating through the device is pretty much the same:
- 5x fire-button to turn on/off
- 3x fire-button while on to activate scrolling through the different functions (up and down button to scroll)
- 3x fire-button till function title blinks and two times fire-button to get to puff-counter, use up or down to reset to 0.
- Hold fire-button and up or down to adjust screen brightness.
Different functions the device has are:
VW (Wattage)
TC-NI (Temp control Nichrome)
TC-SS (Temp control Stainless steel)
TC-TI (Temp control Titanium)
TCR (Temprature Coefficient of Resistance)
VPC (Vape curve)
BYPASS (To make it act like a mech, output based on remaining battery and coil resistance)
Kind of the standard package on a mod nowadays, even though I am not using Variable Voltage I think it should have been included. I do like the easiness of adjusting wattage in Temp control mods, just click the fire-button 3 times till the function title blinks, click the fire-button twice till the wattage box blinks and adjust using up and down.
Good it scrolls in 0.1w increments as I really like using this mod as an MTL-mod as well. I have not had any issues really with this device, it just worked great so far, and I am very happy having one.
Did not testing throwing it in the water, but did unintentionally drop it several times, even from heights such as 1.5m and it did not even have a scratch. Drop-resistant it for sure is, something that always comes in handy for people like me, being not too careful sometimes.
Conclusion:
A nice, tiny internal battery mod which is very properly armored with its IP68 rating. Cannot complain about this one much really apart from three tiny things; the missing adapter for the charging dock, missing variable voltage and the unnecessary arrow-design under the fire-button.
For the rest I find only positives on this device. The charging dock is quite revolutionary and with a proper (30W+) adapter you charge really in just 12 minutes, which is amazing. It lays nicely in the hand, it fires right away and it does what it needs to do very properly.
I would suggest this device for those that are not into vaping at very high wattages and are looking for a proper internal battery mod.
Thank you for reading, appreciate it.
Sjoerd
Another review, this time an interesting one about the VapX Meteor mod. Its the newest box mod by VapX that has two very interesting features, IP68 rating and a charging dock that allows you to fully charges the device in 11 minutes.
Thank you Clay from VapX for sending me this box mod and charging dock!
Specifications:
Packaging:
- Meteor Mod
- User manual
- USB-C cable
In docking station packaging, just the docking station
Review:
Its a tiny but nicely looking mod, Aegis like. Nicely stitched leather gives it a nice grip. Overall quality is very proper, does not feel cheap. Branding is not bad, just the arrows down on the side of the mod (under the fire-button) were not really needed in my opinion. The writing VapX on the side looks nice and has a rainbowish shine to it while moving the device.
It is shock, dust and IP68 rated. This is the first IP68 rated mod I can think of. Is there much difference with IP67? The answer is no. Difference is that IP68 can go deeper into the water than IP67, but still for the same time of 30 minutes. IP67 can be submerged into the water for 30 minutes till a depth of 0.5m, while IP68 can go deeper up to 1.5m. On VapX website it says it can go as deep as 8 meters, but I doubt that is for a long period of time. Quite a big difference and gives more protection, but in general mods are not made to swim with.
It can take a 28mm tank without overhang which is good. Not sure why they embedded the 510-connector, it can look a bit funny with a smaller tank. On the bottom of the device you fill find the connectors pins that connect with the charging dock (sold separately).
Very nice buttons, especially like the fire-button a lot. It is quite big and has a nice restrictive click to it. The navigation buttons on the side also work well, click nice and do not rattle.
Its an internal battery mod. 2000mAh is not impressive, but OK for the size of the mod. There are two charging methods; by USB-C through the sealed USB port or by dropping it 'like a Meteor' onto the charging station. It connects well with the station, and on the device is a tiny arrow design to show which way to put it. Charging station itself is very light, which means that you cannot just pull of your device as the charging station goes with it. To disconnect you need to hold the station.
Charging through regular cable takes around 45-50 minutes, which is quite fast already.
Station is reliant on the charging adapter, which is not included, which I think should have been. With a 16W phone charger it takes about 20 minutes for a full charge, to be able to charge within 12 minutes (did not charge within 10 as advertised) you will need a 30W+ charging adapter (USB-C laptops have those for example). The idea is really great and the way the mod connects to the station is a pleasure to see, but as mentioned, an adapter should have been included. Still it charges so much faster than other mod, so only thumbs up on the station. When a lower output adapter is connected it says ‘Fast Charging’ on the screen, when a 30W+ adapter is connected it says ‘Super Charging’.
You are not able to vape while charging, which makes sense for the station, but I like to be able to vape while charging through cable. Even though it might be convenient to after every vape drop the mod on the station, I do not suggest doing so. Batteries also have a stress level and charging it every time you take a vape might shorten the battery life.
Screen is nice and vibrant, but not theme/color adjustable. It is possible to adjust the brightness which is always nice.
It is really nice the screen and navigation buttons are on the side in my opinion. It is simply comfortable to navigate this way, hard to explain.
If its about the chipset, reminds me very much of the Aegis, also navigating through the device is pretty much the same:
- 5x fire-button to turn on/off
- 3x fire-button while on to activate scrolling through the different functions (up and down button to scroll)
- 3x fire-button till function title blinks and two times fire-button to get to puff-counter, use up or down to reset to 0.
- Hold fire-button and up or down to adjust screen brightness.
Different functions the device has are:
VW (Wattage)
TC-NI (Temp control Nichrome)
TC-SS (Temp control Stainless steel)
TC-TI (Temp control Titanium)
TCR (Temprature Coefficient of Resistance)
VPC (Vape curve)
BYPASS (To make it act like a mech, output based on remaining battery and coil resistance)
Kind of the standard package on a mod nowadays, even though I am not using Variable Voltage I think it should have been included. I do like the easiness of adjusting wattage in Temp control mods, just click the fire-button 3 times till the function title blinks, click the fire-button twice till the wattage box blinks and adjust using up and down.
Good it scrolls in 0.1w increments as I really like using this mod as an MTL-mod as well. I have not had any issues really with this device, it just worked great so far, and I am very happy having one.
Did not testing throwing it in the water, but did unintentionally drop it several times, even from heights such as 1.5m and it did not even have a scratch. Drop-resistant it for sure is, something that always comes in handy for people like me, being not too careful sometimes.
Conclusion:
A nice, tiny internal battery mod which is very properly armored with its IP68 rating. Cannot complain about this one much really apart from three tiny things; the missing adapter for the charging dock, missing variable voltage and the unnecessary arrow-design under the fire-button.
For the rest I find only positives on this device. The charging dock is quite revolutionary and with a proper (30W+) adapter you charge really in just 12 minutes, which is amazing. It lays nicely in the hand, it fires right away and it does what it needs to do very properly.
I would suggest this device for those that are not into vaping at very high wattages and are looking for a proper internal battery mod.
Thank you for reading, appreciate it.
Sjoerd
-
Locked
Wotofo Manik Mini Pod Review
- By SP013
- Device Reviews
- 2 Replies
Hello,
Today a new pod by Wotofo the Manik Mini, a pod specifically focused on MTL.
Thank you Antonio from Wotofo for sending me this kit.
Specifications:
Packaging:
· Manik Mini Device x1
· User Manual x1
· Charging Cable x1
· M12 nexMESH Coil Replacement Pod x 1 (pre-installed)
· M11 Parallel Coil Replacement Pod x1
Review:
First impression is that it looks very similar to the Smok Nord 2, but in my opinion the Manik is designed in a better way. The leather panels on each side give it a nice feel. Manik branding is big but not disturbing at all as its kept in the same color. It feels properly made but still light-weight, metallic frame has a nicely coated layer of paint and after 3 weeks of use I have not got any visible scratches.
It has a small screen on one of the sides. Also, similar information as on the Nord 2 is displayed; puff-counter, resistance, wattage setting, voltage output and battery percentage. Everything essential is on there for a pod this size. I just wish the screen would have been a bit brighter, inside its fine, but outside it can be hard to read in some circumstances.
One tiny button it has positioned under the screen. For me it is a bit too small, could have been bigger. With this single button you are able to:
- 5 clicks turn off/on
- 3 clicks while on allows user to change wattage, 1 click while blinking is 1W up and at 30W it round-robins back to 5W
- Hold while on resets the puff-counter
Button cannot be used to vape, it is solely draw activation. Draw activation does work very well
The 1000mAh holds up well, no matter which pod you use, you will get 250+ puffs before it dies. It does not have USB-C, but it charges pretty fast, 45-50 minutes for a full charge, so actually a bit faster than the advertised 1 hour.
There is two pods included in the kit, one mesh and one parallel coil, both rated at 0.6ohm. It does not have replaceable coils, so you need to toss the whole pod away after its done.
3ML of capacity is enough. It is easy to see the liquid level as the pod is not too dark. Filling is done through a hole on the side, which is large enough and does not cause a mess while filling.
Pods click and connect strongly with the help of magnets. No issues with wiggling or the pod falling out on its own. I like the shape of the mouthpiece a lot, its a nice wide flattened out mouthpiece.
No airflow adjustment on this one, which is always a minus in my opinion. Both pods provide similar airflow which I would describe as semi-loose. It is getting close to tight, but for my personal preference it could have been tighter.
Both pods do vape very nicely, and it is hard to say which one provides better flavor, very similar. I prefer the parallel coil as it can be pushed up to 22W and therefor provides a warmer vape. Overall, very proper flavor and a nice throat-hit. You can use them for a restricted DTL vape, but I find these coils to be MTL.
No issues with wicking or keeping up with chain-vaping. From time to time I do however get a bit of gurgling action and rarely a 'wet' vape, meaning a minimal amount of liquid ends up in my mouth while taking a draw. Both coils have been going for a good 3 weeks (not as my only device though) and are still performing well.
Conclusion:
A nicely made pod that vapes very well, like both coils a lot and have had pretty much no issues with this pod whatsoever. I think this is not the type of pod for smokers, because I think the draw might be a bit too loose, but it’s a nice pod for those liking a looser, but flavorful MTL vape.
Downsides I have are the brightness of the screen, the airflow not being adjustable and the fact that you cannot replace the coil, but the whole pod needs to be replaced.
Kit itself is available for 35$ on the official Wotofo website>Manik Mini Pod Kit
Replacement pods (3 in one pack) cost around 15$ > Manik Mini Replacement Pod
Thanks a lot for taking your time to read, appreciate it.
Have a wonderful day,
Sjoerd
Today a new pod by Wotofo the Manik Mini, a pod specifically focused on MTL.
Thank you Antonio from Wotofo for sending me this kit.
Specifications:
Packaging:
· Manik Mini Device x1
· User Manual x1
· Charging Cable x1
· M12 nexMESH Coil Replacement Pod x 1 (pre-installed)
· M11 Parallel Coil Replacement Pod x1
Review:
First impression is that it looks very similar to the Smok Nord 2, but in my opinion the Manik is designed in a better way. The leather panels on each side give it a nice feel. Manik branding is big but not disturbing at all as its kept in the same color. It feels properly made but still light-weight, metallic frame has a nicely coated layer of paint and after 3 weeks of use I have not got any visible scratches.
It has a small screen on one of the sides. Also, similar information as on the Nord 2 is displayed; puff-counter, resistance, wattage setting, voltage output and battery percentage. Everything essential is on there for a pod this size. I just wish the screen would have been a bit brighter, inside its fine, but outside it can be hard to read in some circumstances.
One tiny button it has positioned under the screen. For me it is a bit too small, could have been bigger. With this single button you are able to:
- 5 clicks turn off/on
- 3 clicks while on allows user to change wattage, 1 click while blinking is 1W up and at 30W it round-robins back to 5W
- Hold while on resets the puff-counter
Button cannot be used to vape, it is solely draw activation. Draw activation does work very well
The 1000mAh holds up well, no matter which pod you use, you will get 250+ puffs before it dies. It does not have USB-C, but it charges pretty fast, 45-50 minutes for a full charge, so actually a bit faster than the advertised 1 hour.
There is two pods included in the kit, one mesh and one parallel coil, both rated at 0.6ohm. It does not have replaceable coils, so you need to toss the whole pod away after its done.
3ML of capacity is enough. It is easy to see the liquid level as the pod is not too dark. Filling is done through a hole on the side, which is large enough and does not cause a mess while filling.
Pods click and connect strongly with the help of magnets. No issues with wiggling or the pod falling out on its own. I like the shape of the mouthpiece a lot, its a nice wide flattened out mouthpiece.
No airflow adjustment on this one, which is always a minus in my opinion. Both pods provide similar airflow which I would describe as semi-loose. It is getting close to tight, but for my personal preference it could have been tighter.
Both pods do vape very nicely, and it is hard to say which one provides better flavor, very similar. I prefer the parallel coil as it can be pushed up to 22W and therefor provides a warmer vape. Overall, very proper flavor and a nice throat-hit. You can use them for a restricted DTL vape, but I find these coils to be MTL.
No issues with wicking or keeping up with chain-vaping. From time to time I do however get a bit of gurgling action and rarely a 'wet' vape, meaning a minimal amount of liquid ends up in my mouth while taking a draw. Both coils have been going for a good 3 weeks (not as my only device though) and are still performing well.
Conclusion:
A nicely made pod that vapes very well, like both coils a lot and have had pretty much no issues with this pod whatsoever. I think this is not the type of pod for smokers, because I think the draw might be a bit too loose, but it’s a nice pod for those liking a looser, but flavorful MTL vape.
Downsides I have are the brightness of the screen, the airflow not being adjustable and the fact that you cannot replace the coil, but the whole pod needs to be replaced.
Kit itself is available for 35$ on the official Wotofo website>Manik Mini Pod Kit
Replacement pods (3 in one pack) cost around 15$ > Manik Mini Replacement Pod
Thanks a lot for taking your time to read, appreciate it.
Have a wonderful day,
Sjoerd
-
Locked
Vinci Pod : Never Fade
- Voopoo
- 0 Replies
Vinci Pod adopts the CMF design process on the outfit-- single grain and single plating. The light is refracted back and forth between the different textures and coatings that are closely adhered to each other, resulting in a mirror-level brilliance and transparency. Its surface AG layer is anti-fingerprint, anti-glare and other functions, so that both beauty and strength.
-
Locked
Preview:Uwell Valyrian SE Pod System Kit 1250mAh
- Everzon
- 0 Replies
Uwell Valyrian SE Pod System Kit works with 1250mAh built-in battery with 2A quick charging. Uwell Valyrian SE Pod Kit adopts LED indicator to show vaping information. Uwell Valyrian SE cartridge has 3ml capacity and 0.6 Ω / 1.0Ω Coil with Pro-FOCS Coil Technology. Uwell Valyrian SE can bring DTL & MTL vapings for you.
Parameters:
Material: Aluminum Alloy & PCTG
Battery: Built-in 1250mAh Battery
Wattage: Max 25W
Charging: TYPE-C, 2A
Capacity: 3ml
Resistance: 0.6 Ω / 1.0Ω Coil
Features:
Internal 1250mah battery with Max 25W Output
LED Indicator
DTL & MTL Vaping
Pro-FOCS Coil Technology
Adjustable Airflow
Parameters:
Material: Aluminum Alloy & PCTG
Battery: Built-in 1250mAh Battery
Wattage: Max 25W
Charging: TYPE-C, 2A
Capacity: 3ml
Resistance: 0.6 Ω / 1.0Ω Coil
Features:
Internal 1250mah battery with Max 25W Output
LED Indicator
DTL & MTL Vaping
Pro-FOCS Coil Technology
Adjustable Airflow
-
Locked
Preview All VOOPOO VINCI SERIES
- Everzon
- 0 Replies
Voopoo launched the latest items of Voopoo Vinci series: Voopoo Vinci 15w Pod Kit 800mah. Voopoo Vinci series consists of Voopoo Vinci Pod, Voopoo VINCI Air Mod Pod, VOOPOO Vinci X Mod Pod, VOOPOO VINCI Mod Pod and VOOPOO VINCI R Mod Pod. It may have more products in future. Here is the differences and similarities of them. Follow Everzon to check more details.
Smart and portable are the soul of the VINCI series.
New generation GENE.AI with visual concept implanted and retain the traditional MOD's big cloud and adjustable power make it smaller, easier to operate, and safer to use.
1. Voopoo Vinci Pod System Kit 800mah
Features
The latest ITO vaporization tech, more delicate, fuller taste and higher reduction degree
Partly hiden and visable LED light to show power: <20% red, 20-60% blue, >60% green
Portable and exquisite design with good touch feeling and anti-fingerprint
Internal 800mAh battery, Type-C charging
GENE chip, stable 15W output
Smooth airway, Second Suction experience, super sensitive and fast
Adjust the side buttons to down-increase the intake to adjust your favorite flavors
Inner structure to improve the leakage preventer
2ml capacity with side filling design
Overtime protection
Short circuit protection
Overcharge protection
Over-current protection
Over-discharge protection
Over-temperature protection
2. Voopoo VINCI AIR Pod System Kit 900mah
Features
Zinc Alloy & PCTG construction with Light weight and further texture
Internal 900mah battery for long time vaping
GENE.AI Chip, smartest chip in e-cigarettes with puff mode
Inward-looking screen
Automatic and manual dual start mode
Two air inlets, two ignition methods
Keep innovative dual airflow system
Optimized airway design for MTL and Half-DL
Compatible with PnP coils(0.45Ω PnP-VM3 single mesh coil/0.8Ω PnP-R1 dual coils/
PnP-RBA)
Support e-juice and Nic salt
Upgraded magnetic suction tank
Overtime protection
Over discharge protection
Output over-current Protection
Short-circuit protection
Over charging protection
Over-temperature protection
Max power protection
3. VOOPOO Vinci X 70W Mod Pod Kit
Features
Advanced Gene.AI chip
Powered by single 18650 battery with max 70W output
Visible breathe: show the two-week accumulative puffs by a puff curve
0.96 inch TFT color screen
Side filling design
Dual airflow system: rotate 180°to change e-liquid or other coils
Compatible with All PnP coils
Overtime protection
Short circuit protection
Overcharge protection
Max power protection
Output over-current protection
Over discharge protection
Over temperature protection
Battery reverse protection
4. VOOPOO VINCI 40W Pod Mod Kit 1500mah
Features:
Innovative pod system VW kit with 1500mAh battery
Intelligent GENE.AI chip
Widely suitable for PnP coils
Intelligent coil protection for not burnt out
Compatible with E-juice & Nic-salt
Innovative dual airflow system
Manual and auto modes to meet different users
PUFF curve mode to record vaping habits
Overtime protection
Short-circuit protection
Overcharge protection
Over-current protection
Over-discharge protection
Max power protection
Over-temperature protection
----------------------
$0.01-$19.99 Cheap Deals
IN STOCK VAPE DEVICES
Daily Deals
Coupon Codes
Bundle Sales
Blog: THE OVERVIEW OF ALL VOOPOO VINCI SERIES | PREVIEW
Smart and portable are the soul of the VINCI series.
New generation GENE.AI with visual concept implanted and retain the traditional MOD's big cloud and adjustable power make it smaller, easier to operate, and safer to use.
1. Voopoo Vinci Pod System Kit 800mah
Features
The latest ITO vaporization tech, more delicate, fuller taste and higher reduction degree
Partly hiden and visable LED light to show power: <20% red, 20-60% blue, >60% green
Portable and exquisite design with good touch feeling and anti-fingerprint
Internal 800mAh battery, Type-C charging
GENE chip, stable 15W output
Smooth airway, Second Suction experience, super sensitive and fast
Adjust the side buttons to down-increase the intake to adjust your favorite flavors
Inner structure to improve the leakage preventer
2ml capacity with side filling design
Overtime protection
Short circuit protection
Overcharge protection
Over-current protection
Over-discharge protection
Over-temperature protection
2. Voopoo VINCI AIR Pod System Kit 900mah
Features
Zinc Alloy & PCTG construction with Light weight and further texture
Internal 900mah battery for long time vaping
GENE.AI Chip, smartest chip in e-cigarettes with puff mode
Inward-looking screen
Automatic and manual dual start mode
Two air inlets, two ignition methods
Keep innovative dual airflow system
Optimized airway design for MTL and Half-DL
Compatible with PnP coils(0.45Ω PnP-VM3 single mesh coil/0.8Ω PnP-R1 dual coils/
PnP-RBA)
Support e-juice and Nic salt
Upgraded magnetic suction tank
Overtime protection
Over discharge protection
Output over-current Protection
Short-circuit protection
Over charging protection
Over-temperature protection
Max power protection
3. VOOPOO Vinci X 70W Mod Pod Kit
Features
Advanced Gene.AI chip
Powered by single 18650 battery with max 70W output
Visible breathe: show the two-week accumulative puffs by a puff curve
0.96 inch TFT color screen
Side filling design
Dual airflow system: rotate 180°to change e-liquid or other coils
Compatible with All PnP coils
Overtime protection
Short circuit protection
Overcharge protection
Max power protection
Output over-current protection
Over discharge protection
Over temperature protection
Battery reverse protection
4. VOOPOO VINCI 40W Pod Mod Kit 1500mah
Features:
Innovative pod system VW kit with 1500mAh battery
Intelligent GENE.AI chip
Widely suitable for PnP coils
Intelligent coil protection for not burnt out
Compatible with E-juice & Nic-salt
Innovative dual airflow system
Manual and auto modes to meet different users
PUFF curve mode to record vaping habits
Overtime protection
Short-circuit protection
Overcharge protection
Over-current protection
Over-discharge protection
Max power protection
Over-temperature protection
----------------------
$0.01-$19.99 Cheap Deals
IN STOCK VAPE DEVICES
Daily Deals
Coupon Codes
Bundle Sales
Blog: THE OVERVIEW OF ALL VOOPOO VINCI SERIES | PREVIEW
-
Locked
Digiflavor Drop RDA V1.5 24mm!
- By AndyColins
- Efun.Top
- 0 Replies
Digiflavor Drop RDA V1.5 24mm!
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse https://efun.top/collections/us-warehouse
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse https://efun.top/collections/us-warehouse
-
Locked
Let’s throwback to one of the Innokin classic products -- iTaste MVP.
- Innokin Technology
- 20 Replies
Hello ECF,
Let’s throwback to one of the Innokin classic products -- iTaste MVP.
It is the first vaporizer with adjustable voltage, wattage, while it is also a mass produced box mod. And it can be used as a power bank as well.
Have you tried any of this MVP series? Share yours with us~
Best Regards,
Innokin Team
Let’s throwback to one of the Innokin classic products -- iTaste MVP.
It is the first vaporizer with adjustable voltage, wattage, while it is also a mass produced box mod. And it can be used as a power bank as well.
Have you tried any of this MVP series? Share yours with us~
Best Regards,
Innokin Team
-
Locked
Coming Soon! Uwell Valyrian SE Kit 1250mAh 3ml
- By vapbig
- HealthCabin
- 0 Replies
Uwell Valyrian SE Kit is an exquisite and ergonomic pod system device, with integrated 1250mAh battery, and a 3ml/2ml refillable replacement pod. The Valyrian SE Pod Kit body is made of durable and lightweight Aluminum Alloy with a letter pattern on the surface, adding a stylish and exquisite atmosphere to the small and compact vape system. It is powered by a built-in 1250mAh battery, is more durable than most Pod devices, and can be easily charged via the micro USB port on the bottom. In addition, the 3ml/2ml refillable replacement box is made of PCTG with an integrated coil of 1.0ohm or 0.6ohm, which supports DTL vaping And MTL vaping. Convenient side-fill cap design for easier filling. Compatible with nicotine salt and regular e-liquid.
Features:
Ergonomic design, exquisite appearance
Integrated 1250mAh Rechargeable Battery
3ml max refillable juice capacity
Top filling design, easy to refill
Magnetic Pod Connection
Micro USB Charging Port
Support nicotine salt and regular e-liquid
Meet the needs of DTL Vaping and MTL Vaping
...
Click here for more:
Valyrian SE Kit: Uwell Valyrian SE Pod System Kit 1250mAh 3ml
Features:
Ergonomic design, exquisite appearance
Integrated 1250mAh Rechargeable Battery
3ml max refillable juice capacity
Top filling design, easy to refill
Magnetic Pod Connection
Micro USB Charging Port
Support nicotine salt and regular e-liquid
Meet the needs of DTL Vaping and MTL Vaping
...
Click here for more:
Valyrian SE Kit: Uwell Valyrian SE Pod System Kit 1250mAh 3ml
-
Locked
Vandy Vape Requiem BF Kit Giveaway, 1 winner, ends on Apr. 7th
- By Ema
- Sourcemore
- 0 Replies
Requiem BF Kit features silver contact and different alloys for maximum conductivity and comfortable grip. With a 6ml squonk bottle, Requiem BF Mod Kit supplies 3 methods to refill, which bring more convenience and no condensate. Requiem BF adopts a safety switch to lock power button. The full mechanical mod also supports single 18650 battery and 0.26ohm Fused Clapton Coil to provide wider flavor choices and better taste performance. Vandy Vape Requiem BF Kit would satisfy all your vaping needs.
Vandy Vape Requiem BF Kit Giveaway, 1 winner, ends on Apr. 7th
Enter here
-
Locked
Vandy Vape REQUIEM BF kit review - with a safety switch
- By Verashu
- Vapesourcing
- 0 Replies
The Vandy Vape REQUIEM BF kit has its refilling design: there are three ways to fill the bottle, one of which is to fill it through the small hole on the side of the bottle cap, so you don’t even need to remove the bottle from the mod when filling.
Main Features:
1. Vandy Vape RDA Atomizer & Fused Clapton Coil 0.26Ω, for optional single coil installation
2. Three methods of the bottle to refill, you even needn't take out the bottle from the mod
3. Single 18650 battery, silver contact and different alloys for maximum conductivity
4. Full mechanical Mod, exquisite and small, solid and durable
The kit has an RDA atomizer and a fused Clapton coil 0.26Ω (can be used for optional coil installation), and uses silver contacts and different alloy materials to achieve maximum conductivity. In addition, the all-mechanical Mod is exquisite, compact and durable.
Click here to learn more details: Vandy Vape Requiem BF Kit
Other kits from Vandy Vape:
voopoo argus x for sale
voopoo gift set near me
Main Features:
1. Vandy Vape RDA Atomizer & Fused Clapton Coil 0.26Ω, for optional single coil installation
2. Three methods of the bottle to refill, you even needn't take out the bottle from the mod
3. Single 18650 battery, silver contact and different alloys for maximum conductivity
4. Full mechanical Mod, exquisite and small, solid and durable
The kit has an RDA atomizer and a fused Clapton coil 0.26Ω (can be used for optional coil installation), and uses silver contacts and different alloy materials to achieve maximum conductivity. In addition, the all-mechanical Mod is exquisite, compact and durable.
Click here to learn more details: Vandy Vape Requiem BF Kit
Other kits from Vandy Vape:
voopoo argus x for sale
voopoo gift set near me
-
Locked
Freemax Onnix 20W Kit Coming Soon
- Freemax
- 0 Replies
Hi, Freemaxers,
Freemax will release another new pod system kit - Onnix 20W Kit with two kinds of mesh coils available: OX Mesh Coil 0.5ohm & OX DVC Coil 1.0ohm. Freemax Onnix 20W Kit is the only pod for all your needs, so do you think this is one environmental-friendly pod system?
Here are the main features of the Onnix 20w Kit:
1. Dual airflow mechanism for both RDL and MTL
2. 3-level adjustable power output
3. 1100mAh internal battery
4. 100% flavor categories compatible
How do you like this new pod system? You can refill any kind of juice into this Freemax new pod for RDL and MTL. Is this the only pod system for all your different needs? Welcome to leave your comment below.
Freemax will release another new pod system kit - Onnix 20W Kit with two kinds of mesh coils available: OX Mesh Coil 0.5ohm & OX DVC Coil 1.0ohm. Freemax Onnix 20W Kit is the only pod for all your needs, so do you think this is one environmental-friendly pod system?
Here are the main features of the Onnix 20w Kit:
1. Dual airflow mechanism for both RDL and MTL
2. 3-level adjustable power output
3. 1100mAh internal battery
4. 100% flavor categories compatible
How do you like this new pod system? You can refill any kind of juice into this Freemax new pod for RDL and MTL. Is this the only pod system for all your different needs? Welcome to leave your comment below.
-
Locked
First Look-Uwell Valyrian SE Kit 1250mAh
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Today I'm gonna introduce the Valyrian SE Kit by Uwell. It looks very like the original Valyrian, what's the difference between them? Just read on to find out.
Uwell Valyrian SE is the latest addition to the Valyrian line. Made of Aluminum Alloy and PCTG material, it sports a beautiful totem shell and is very easy to carry. Features 1250mAh built-in battery capacity, supports 2A fast charging through the USB Type-C port on the bottom. Easy, fast, and convenient. Built-in smart chipset, the chip has multiple protection features to provide a safe and reliable experience. As for the 3ml capacity pod, it has an airflow valve on the side of the pod. The airflow of the pod can be adjusted as you want to pursue a smoother airflow or tighter draw.
And the coil can be replaced for more prolonged use and lower cost. The 0.6Ω DTL coil offers a smooth airflow and more cloud. The 1.0Ω coil offers a tight draw to satisfy your need for a real MTL vape. Combine with the Pro-FOCS flavor testing technology, the Uwell vape Valyrian SE gives you an excellent vape experience. The flavor you will get from the coil will provide you with a true and untainted flavor, as always. Moreover, the sliding top filling method is so easy, you just slide the top cap to fill your e-liquid. The silicone filling port prevents e-liquid from leaking. 5 colors available.
Check for more details here: Uwell Valyrian SE Pod System Kit 1250mAh
You may also like:
voopoo vinci pod system kit review
ijoy captain link kit price
Uwell Valyrian SE is the latest addition to the Valyrian line. Made of Aluminum Alloy and PCTG material, it sports a beautiful totem shell and is very easy to carry. Features 1250mAh built-in battery capacity, supports 2A fast charging through the USB Type-C port on the bottom. Easy, fast, and convenient. Built-in smart chipset, the chip has multiple protection features to provide a safe and reliable experience. As for the 3ml capacity pod, it has an airflow valve on the side of the pod. The airflow of the pod can be adjusted as you want to pursue a smoother airflow or tighter draw.
And the coil can be replaced for more prolonged use and lower cost. The 0.6Ω DTL coil offers a smooth airflow and more cloud. The 1.0Ω coil offers a tight draw to satisfy your need for a real MTL vape. Combine with the Pro-FOCS flavor testing technology, the Uwell vape Valyrian SE gives you an excellent vape experience. The flavor you will get from the coil will provide you with a true and untainted flavor, as always. Moreover, the sliding top filling method is so easy, you just slide the top cap to fill your e-liquid. The silicone filling port prevents e-liquid from leaking. 5 colors available.
Check for more details here: Uwell Valyrian SE Pod System Kit 1250mAh
You may also like:
voopoo vinci pod system kit review
ijoy captain link kit price
-
Locked
Anlerr Pipevape Dry Herb Vaporizer Kit 1000mAh £29.99 23% OFF
- VapesourcingUK
- 0 Replies
Hi,friends.Do you have a Vaporizer Kit?Today, I will introduce you the Anlerr Pipevape Dry Herb UK.I believe that the fans of vaporizer will expect for it.People who haven't tried it will be more curious after they learn about it.Now,we check it out.
Urbane, sophisticated, different... If this is your style, the Anlerr Pipevape (also known as Homles) Dried Herbal Vaporizer UK by Lord Vaper Pen is just what you need! Uniquely designed in the shape of a woodpipe, PipeVape brings a unique experience into the form of a high-quality dried herb evaporator. Not only does the tube look great, it wraps up all the great non-burning baking features, like a sprayer that doubles the price. Featuring a variable range of temperature controls, you can dial in to achieve the perfect temperature to evaporate your dried herbs.The built-in OLED screen displays all the necessary information to let you know exactly what's going on.Please go to best online vape store uk.
SPECIFICATION
Size:6 × 3.6 × 2 in
Battery:1000mAh built-in battery
Material:Environment durable PPS+PC
Temperature Range:300-435℉/149-224℃
Resistant/MAX Power:0.6Ω/30W
Working by:Heating Chamber/isolate airflow/Large OLED
Quick Link:Anlerr Pipevape Dry Herb Vaporizer Kit 1000mAh
Urbane, sophisticated, different... If this is your style, the Anlerr Pipevape (also known as Homles) Dried Herbal Vaporizer UK by Lord Vaper Pen is just what you need! Uniquely designed in the shape of a woodpipe, PipeVape brings a unique experience into the form of a high-quality dried herb evaporator. Not only does the tube look great, it wraps up all the great non-burning baking features, like a sprayer that doubles the price. Featuring a variable range of temperature controls, you can dial in to achieve the perfect temperature to evaporate your dried herbs.The built-in OLED screen displays all the necessary information to let you know exactly what's going on.Please go to best online vape store uk.
SPECIFICATION
Size:6 × 3.6 × 2 in
Battery:1000mAh built-in battery
Material:Environment durable PPS+PC
Temperature Range:300-435℉/149-224℃
Resistant/MAX Power:0.6Ω/30W
Working by:Heating Chamber/isolate airflow/Large OLED
Quick Link:Anlerr Pipevape Dry Herb Vaporizer Kit 1000mAh
-
Locked
Advken Potento Pod System Kit 560mAh 2.5ml 1.2ohm
Hello, everyone,
Today to introduce Advken Potento Pod System Vape Starter Kit 560mAh, a pen-shaped Potento pod kit with a voltage adjustable knob from Advken
Advken Potento Pod Kit with 2.5ml pod cartridge is powered by a built-in 560mAh battery. Rotating the bottom potentiometer control knob can adjust voltage from 3.2V to 4.2V for most flawless flavor and effortless vapor.
Advken Potento pod cartridge with 1.2ohm coil, is made of PCTG material and holds 2.5ml E-juice capacity with side filling design.
More details about Advken Potento 560mAh Pod System Vape Starter Kit, Please Check >> https://www.3fvape.com/48589-advken-potento-560mah-pod-system-vape-starter-kit.html
Today to introduce Advken Potento Pod System Vape Starter Kit 560mAh, a pen-shaped Potento pod kit with a voltage adjustable knob from Advken
Advken Potento Pod Kit with 2.5ml pod cartridge is powered by a built-in 560mAh battery. Rotating the bottom potentiometer control knob can adjust voltage from 3.2V to 4.2V for most flawless flavor and effortless vapor.
Advken Potento pod cartridge with 1.2ohm coil, is made of PCTG material and holds 2.5ml E-juice capacity with side filling design.
More details about Advken Potento 560mAh Pod System Vape Starter Kit, Please Check >> https://www.3fvape.com/48589-advken-potento-560mah-pod-system-vape-starter-kit.html
-
Locked
Advken Orcas Pod System Starter Kit 360mAh 2ml 1.2ohm
Welcome to the topic of new produce introduction.
Today we gonna talk about Advken Orcas Pod System Vape Starter Kit, a portable pen-shaped Orcas Pod Kit from Advken.
Advken Orcas Pod Kit with 2.0ml pod cartridge with 1.2ohm coil, is a draw-activated firing pod kit, powered by a 360mAh built-in battery with the output power of 10W. Constructed from aluminum alloy, it has LED battery life indicator for you to check the battery level anytime.
Advken Orcas Pod Cartridge, a mesh coil pod cartridge with 1.2ohm KA1 coil, holds 2.0ml capacity with side filling system, delivering you a pure flavor.
Two colors for your choice: Midnight Red / Midnight Blue
More details about Advken Orcas 360mAh Pod System Starter Kit, Please Check >> https://www.3fvape.com/48590-advken-orcas-pod-system-vape-starter-kit.html
Today we gonna talk about Advken Orcas Pod System Vape Starter Kit, a portable pen-shaped Orcas Pod Kit from Advken.
Advken Orcas Pod Kit with 2.0ml pod cartridge with 1.2ohm coil, is a draw-activated firing pod kit, powered by a 360mAh built-in battery with the output power of 10W. Constructed from aluminum alloy, it has LED battery life indicator for you to check the battery level anytime.
Advken Orcas Pod Cartridge, a mesh coil pod cartridge with 1.2ohm KA1 coil, holds 2.0ml capacity with side filling system, delivering you a pure flavor.
Two colors for your choice: Midnight Red / Midnight Blue
More details about Advken Orcas 360mAh Pod System Starter Kit, Please Check >> https://www.3fvape.com/48590-advken-orcas-pod-system-vape-starter-kit.html
-
Locked
URSA QUEST MULTI KIT REVIEWED BY BIGBOB2322
- By Bigbob2322
- Device Reviews
- 2 Replies
Hello again and welcome back for today's review of the Ursa Quest Multi Kit from Lost Vape. This kit was provided to me from Sourcemore for the purpose of this review, later on I will provide a code and link from Sourcemore where you can purchase the Ursa Quest Multi Kit for a great price. As the title of the review says this is really a multi modular type of kit that is a great value considering everything that comes inside with it plus optional gear that can be purchased separately if you wish to. Lets begin with some information about this multi Kit before the review. This is primarily a single 21700 battery device but can use 20700 and 18650 batteries also using the provided battery adapter.
All of the pictures of mine are at the bottom of the review in order
COLOR CHOICES AND DEVICE FINISHES
INCLUDED WITH THE KIT
PARAMETERS
COLOR CHANGEABLE LEATHER WITH USE
NEW FEATURES AND CHIP
UB POD COMPATIBLE WITH UB COILS
UB PRO POD WITH UB PRO COILS
BOTH PODS AND 510 ADAPTER LOCK INTO THE DEVICE
TYPE -C WITH 5 VAPE MODES 100 WATT OUTPUT USING 21700 BATTERY
SIDE FILL JUICE PORT
COMPONENTS
As you have seen in this opening of the review there really is a lot going on with the Ursa Quest Multi Kit but we have only scratched the surface. I would call this device the poor man's DNA device and the menu sorta reminds me of one, picking up the device you can feel that it's solidly built with a quality feel as well as high end look to it.
FIRST IMPRESSIONS
Sliding the main box out of the sleeve and opening it has the device laying in a plastic form fitted top cover with all your included pieces underneath.
View attachment 935099
I had no idea which color I was going to receive and was ecstatic with what was sent, pictures really do not show just how attractive the device is. Starting from the top down we begin with the pods, one is the 6ml UB that takes all UB coils as well as a RBA coil and the other is the 7ml UB Pro that takes the pro coils and also has a optional RBA coil.
The UB tank uses a 510 drip tip while the UB Pro tank uses a 810 drip tip. Inside the kit the UB Pro comes already attached to the device using a screw on airflow selector, there is only one airflow selector supplied in the kit so it must be shared by both pods. In the picture below I have the clip in airflow selector turned sideways in front of the device to show 1 of the 2 indents that the 2 clips of the device use to secure the pods to the device, there another one on the other side.
View attachment 935115
Again turned somewhat sideways and highlighted in yellow. There are 2 buttons at the top of the device that need to be depressed when installing either pod or the 510 adapter, be forceful when attaching the pods or 510 adapter making sure each side is fully secured to the device. One of the buttons is shown on the top right side, both buttons are also used to release the pods or 510 adapter.
View attachment 935121
The picture below shows the 510 adapter correctly attached with no real gap under it, I know that I'm harping on this but the buttons don't really pull back the 2 nubs that far and it's easy to leave one not fully attached because of the strong springs. I'd rather have strong stiff springs than soft easy to recess ones.
View attachment 935127
The fillport is located at the top portion of the pods and is a side fill that is mess free and very easy to fill with easy opening plugs.
View attachment 935157
Coming down to the device, battery installation is done through the bottom such as the Grus does with a twist off cover, lift the ring up and twist off to install your battery positive side in. The battery cover has a negative symbol inside it. There is a positive marking inside the tube but it's small and hard to see and there are 3 venting holes on the battery cover.
View attachment 935129
Now let's move to the side with all the action of the device. In the picture below is the side that has the display screen. At the top is one of the release buttons for the pod's and 510 adapter and below it is the power/fire button, below it is the display screen, followed by the up button, then the menu button in the center with the down button below it. The devices type-c charge/firmware update port is at the bottom.
The display screen is very bright and vivid as well as having a color screen. The displays on the screen will change depending on the power mode you choose to use. Lost Vape covered all the bases with the Ursa Quest giving you many power modes and they are: POWER/WATTAGE, BYPASS, VOLTAGE, VARIABLE POWER CURVE or ( VPC ), NI, TI, SS316, and SS904.
You will notice under wattage that there is a font saying POD and next to it is a symbol of a person with the #1 next to him, as I said earlier Lost Vape went all out developing the Ursa Quest giving you a pod mode and also a mod mode with 5 presets for each that you can tailor yourself.
Under the POD/MOD is a box for your choice of preheats and they are: SOFT, NORMAL and HARD and next to it is your 4 digit puff counter. At the very bottom of the display screen is settings
View attachment 935235
In the picture below you see that the screen color has changed because the menu button was pressed and is in adjustment mode, to make any adjustments the menu button must be pressed first, but first toggle through the different items on the screen that you want adjusted using the up or down buttons, once your on the selection that you want to adjust press the menu button ( CENTER BUTTON ) and the screen will change to this color allowing you to only now make the adjustments you want to make.
View attachment 935245
Here is a screen shot in the settings menu, in settings your first selection is atomizer, in this portion of the settings screen you can choose pod or mod ( if you choose mod it will be highlighted red instead of the pod orange color.
Next one down is screen and that is your brightness control
Next one down is user which is your 5 different profiles for pod and 5 different profiles for mod
Next on down is reset and that's self explanatory
About is the last in the settings menu
and it tells you the version of the chip
At the very bottom is back and that brings you back to the main screen
View attachment 935251
USING THE URSA QUEST
Using the Ursa Quest for a couple of weeks has been so enjoyable, picking the device up you instantly feel quality with it's solid build along with a gorgeous appearance. The menu is so easy to operate with only 1 button combination and it is to hold the + and - button simultaneously to lock and unlock wattage adjustments.
Both of the coils that come in the kit are very good giving really good flavor and Lost Vape even has a RBA for each of the pods that can be purchased separately if you wish to build your own coils.
When Lost Vape called this kit a Multi Kit they really meant it, think about it: 2 pods, 2 coils, a 510 adapter that can accept 30mm atomizers, a 18650 battery adapter, extra o-rings and a type-c cord.
Having 5 presets is great but having a ( pod mode ) and a ( mod mode ) that also has 5 presets is fantastic. Lost Vape even gives a bonus metal of SS904 because some people still use it.
The side fill is so effortless as well as mess free but a word of caution, if the pod is half empty refill it avoiding a burnt coil. The attachment of the pods to the device is not a magnet type or click in type but a solid and secure locking type of attachment method.
A word of caution when installing either of the pods or 510 adapter, press firmly down on them because to fit tolerances are so form fitted and the Ursa Quest springs are so strong. I would much rather have stiff strong springs than easy to install weaker ones whose lifespan would be reduced. Be sure to check that the pod/510 adapter is fully seated on both connection sides whenever you install them.
Lost Vape provides only 1 airflow selector that have to shared by both pods, 2 would have been better but you can only use 1 pod at a time so I can see the reason for them only supplying just 1 airflow selector. Speaking of the airflow selector I can tell you that it's smooth in any position that it's in on either pod used.
The menu system is so easy to operate without having to remember many button combinations because there is only 1 and it's the wattage adjustment lock/unlock that I mentioned earlier. Having a dedicated menu button really makes scrolling through your settings or making adjustments so easy.
The color display is also done very well having all your information laid out in a very appealing grid style. You have plenty of brightness in the brightness adjustment and the colors, fonts and symbols are done perfectly. Colors and fonts are very vivid with plenty of detail.
The attractive appearance really just grabs your eye and I think that all the color and metal finishes look really great ( ALL OF THEM ).
PROS
* Attractive
* Quality
* Well built
* Battery versatility
* Dedicated menu button
* Smooth airflow
* 2 Pods included
* 510 Adapter included
* 5 Presets ( POD MODE )
* 5 Presets ( MOD MODE )
* Bright
* Color screen
* Vivid fonts and symbols
* Pods/510 adapter connect securely
* Type-C
* Side fill
* Very good flavor
* Mess free
CONS
* Pod tinting could be lighter
FINAL IMPRESSIONS
Well I think you can tell that I really like the Ursa Quest Multi Kit for the many reasons that I mentioned above. This is not a lightweight by any means but not overly heavy either and is barely small enough to be carried in pants pockets comfortably.
Lost Vape really went all out with the Ursa Quest giving you a truly wonderful kit and a device that has so many bonuses in it as well. Lost Vape is known for quality devices and the Ursa Quest Multi Kit is no exception. The value of this kit is amazingly good with everything that's included as well as a great chipset that is in the device. The link for the Ursa Quest at Sourcemore is here Lost Vape Ursa Quest Multi Kit 100W 6ml/7ml single 21700/20700/18650 and the code is URSA.
So in closing do I recommend the Ursa Quest Multi Kit, yes I do 100%.
I would like to thank Lilia and Sourcemore for providing the Ursa Quest for the purpose of this review.
THANK YOU
BIGBOB2322
All of the pictures of mine are at the bottom of the review in order
COLOR CHOICES AND DEVICE FINISHES
INCLUDED WITH THE KIT
PARAMETERS
COLOR CHANGEABLE LEATHER WITH USE
NEW FEATURES AND CHIP
UB POD COMPATIBLE WITH UB COILS
UB PRO POD WITH UB PRO COILS
BOTH PODS AND 510 ADAPTER LOCK INTO THE DEVICE
TYPE -C WITH 5 VAPE MODES 100 WATT OUTPUT USING 21700 BATTERY
SIDE FILL JUICE PORT
COMPONENTS
As you have seen in this opening of the review there really is a lot going on with the Ursa Quest Multi Kit but we have only scratched the surface. I would call this device the poor man's DNA device and the menu sorta reminds me of one, picking up the device you can feel that it's solidly built with a quality feel as well as high end look to it.
FIRST IMPRESSIONS
Sliding the main box out of the sleeve and opening it has the device laying in a plastic form fitted top cover with all your included pieces underneath.
View attachment 935099
I had no idea which color I was going to receive and was ecstatic with what was sent, pictures really do not show just how attractive the device is. Starting from the top down we begin with the pods, one is the 6ml UB that takes all UB coils as well as a RBA coil and the other is the 7ml UB Pro that takes the pro coils and also has a optional RBA coil.
The UB tank uses a 510 drip tip while the UB Pro tank uses a 810 drip tip. Inside the kit the UB Pro comes already attached to the device using a screw on airflow selector, there is only one airflow selector supplied in the kit so it must be shared by both pods. In the picture below I have the clip in airflow selector turned sideways in front of the device to show 1 of the 2 indents that the 2 clips of the device use to secure the pods to the device, there another one on the other side.
View attachment 935115
Again turned somewhat sideways and highlighted in yellow. There are 2 buttons at the top of the device that need to be depressed when installing either pod or the 510 adapter, be forceful when attaching the pods or 510 adapter making sure each side is fully secured to the device. One of the buttons is shown on the top right side, both buttons are also used to release the pods or 510 adapter.
View attachment 935121
The picture below shows the 510 adapter correctly attached with no real gap under it, I know that I'm harping on this but the buttons don't really pull back the 2 nubs that far and it's easy to leave one not fully attached because of the strong springs. I'd rather have strong stiff springs than soft easy to recess ones.
View attachment 935127
The fillport is located at the top portion of the pods and is a side fill that is mess free and very easy to fill with easy opening plugs.
View attachment 935157
Coming down to the device, battery installation is done through the bottom such as the Grus does with a twist off cover, lift the ring up and twist off to install your battery positive side in. The battery cover has a negative symbol inside it. There is a positive marking inside the tube but it's small and hard to see and there are 3 venting holes on the battery cover.
View attachment 935129
Now let's move to the side with all the action of the device. In the picture below is the side that has the display screen. At the top is one of the release buttons for the pod's and 510 adapter and below it is the power/fire button, below it is the display screen, followed by the up button, then the menu button in the center with the down button below it. The devices type-c charge/firmware update port is at the bottom.
The display screen is very bright and vivid as well as having a color screen. The displays on the screen will change depending on the power mode you choose to use. Lost Vape covered all the bases with the Ursa Quest giving you many power modes and they are: POWER/WATTAGE, BYPASS, VOLTAGE, VARIABLE POWER CURVE or ( VPC ), NI, TI, SS316, and SS904.
You will notice under wattage that there is a font saying POD and next to it is a symbol of a person with the #1 next to him, as I said earlier Lost Vape went all out developing the Ursa Quest giving you a pod mode and also a mod mode with 5 presets for each that you can tailor yourself.
Under the POD/MOD is a box for your choice of preheats and they are: SOFT, NORMAL and HARD and next to it is your 4 digit puff counter. At the very bottom of the display screen is settings
View attachment 935235
In the picture below you see that the screen color has changed because the menu button was pressed and is in adjustment mode, to make any adjustments the menu button must be pressed first, but first toggle through the different items on the screen that you want adjusted using the up or down buttons, once your on the selection that you want to adjust press the menu button ( CENTER BUTTON ) and the screen will change to this color allowing you to only now make the adjustments you want to make.
View attachment 935245
Here is a screen shot in the settings menu, in settings your first selection is atomizer, in this portion of the settings screen you can choose pod or mod ( if you choose mod it will be highlighted red instead of the pod orange color.
Next one down is screen and that is your brightness control
Next one down is user which is your 5 different profiles for pod and 5 different profiles for mod
Next on down is reset and that's self explanatory
About is the last in the settings menu
and it tells you the version of the chip
At the very bottom is back and that brings you back to the main screen
View attachment 935251
USING THE URSA QUEST
Using the Ursa Quest for a couple of weeks has been so enjoyable, picking the device up you instantly feel quality with it's solid build along with a gorgeous appearance. The menu is so easy to operate with only 1 button combination and it is to hold the + and - button simultaneously to lock and unlock wattage adjustments.
Both of the coils that come in the kit are very good giving really good flavor and Lost Vape even has a RBA for each of the pods that can be purchased separately if you wish to build your own coils.
When Lost Vape called this kit a Multi Kit they really meant it, think about it: 2 pods, 2 coils, a 510 adapter that can accept 30mm atomizers, a 18650 battery adapter, extra o-rings and a type-c cord.
Having 5 presets is great but having a ( pod mode ) and a ( mod mode ) that also has 5 presets is fantastic. Lost Vape even gives a bonus metal of SS904 because some people still use it.
The side fill is so effortless as well as mess free but a word of caution, if the pod is half empty refill it avoiding a burnt coil. The attachment of the pods to the device is not a magnet type or click in type but a solid and secure locking type of attachment method.
A word of caution when installing either of the pods or 510 adapter, press firmly down on them because to fit tolerances are so form fitted and the Ursa Quest springs are so strong. I would much rather have stiff strong springs than easy to install weaker ones whose lifespan would be reduced. Be sure to check that the pod/510 adapter is fully seated on both connection sides whenever you install them.
Lost Vape provides only 1 airflow selector that have to shared by both pods, 2 would have been better but you can only use 1 pod at a time so I can see the reason for them only supplying just 1 airflow selector. Speaking of the airflow selector I can tell you that it's smooth in any position that it's in on either pod used.
The menu system is so easy to operate without having to remember many button combinations because there is only 1 and it's the wattage adjustment lock/unlock that I mentioned earlier. Having a dedicated menu button really makes scrolling through your settings or making adjustments so easy.
The color display is also done very well having all your information laid out in a very appealing grid style. You have plenty of brightness in the brightness adjustment and the colors, fonts and symbols are done perfectly. Colors and fonts are very vivid with plenty of detail.
The attractive appearance really just grabs your eye and I think that all the color and metal finishes look really great ( ALL OF THEM ).
PROS
* Attractive
* Quality
* Well built
* Battery versatility
* Dedicated menu button
* Smooth airflow
* 2 Pods included
* 510 Adapter included
* 5 Presets ( POD MODE )
* 5 Presets ( MOD MODE )
* Bright
* Color screen
* Vivid fonts and symbols
* Pods/510 adapter connect securely
* Type-C
* Side fill
* Very good flavor
* Mess free
CONS
* Pod tinting could be lighter
FINAL IMPRESSIONS
Well I think you can tell that I really like the Ursa Quest Multi Kit for the many reasons that I mentioned above. This is not a lightweight by any means but not overly heavy either and is barely small enough to be carried in pants pockets comfortably.
Lost Vape really went all out with the Ursa Quest giving you a truly wonderful kit and a device that has so many bonuses in it as well. Lost Vape is known for quality devices and the Ursa Quest Multi Kit is no exception. The value of this kit is amazingly good with everything that's included as well as a great chipset that is in the device. The link for the Ursa Quest at Sourcemore is here Lost Vape Ursa Quest Multi Kit 100W 6ml/7ml single 21700/20700/18650 and the code is URSA.
So in closing do I recommend the Ursa Quest Multi Kit, yes I do 100%.
I would like to thank Lilia and Sourcemore for providing the Ursa Quest for the purpose of this review.
THANK YOU
BIGBOB2322
Attachments
-
Locked
Nautilus GT - SS (New)
- By crazydmnd
- Member Classifieds and Swaps
- 1 Replies
I bought this thinking I had an rba I could finnagle into fitting it. I was wrong. This has never been fired, filled with juice, stuffed in one's pants, none of that. It would be 10/10 had I not removed the shrink wrap.
$30 includes USPS First Class shipping w/ tracking (+ $4 for 2day priority) in the CONUS
The Details:
The Aspire Nautilus GT is the fruit of a collaboration between Aspire and Taifun, two legends in the vaping industry, to create the ultimate mouth to lung atomizer.
The Aspire Nautilus GT features a 3 ml capacity, a top refill design, and 5 airflow adjustments to maximize the Aspire Nautilus Coils (the most popular coil of all time) performance. The Nautilus GT also features a thickened base for faster heat dissipation and improved airflow and better flavor concentration.
Aspire Nautilus GT package contents:
$30 includes USPS First Class shipping w/ tracking (+ $4 for 2day priority) in the CONUS
The Details:
The Aspire Nautilus GT is the fruit of a collaboration between Aspire and Taifun, two legends in the vaping industry, to create the ultimate mouth to lung atomizer.
The Aspire Nautilus GT features a 3 ml capacity, a top refill design, and 5 airflow adjustments to maximize the Aspire Nautilus Coils (the most popular coil of all time) performance. The Nautilus GT also features a thickened base for faster heat dissipation and improved airflow and better flavor concentration.
Aspire Nautilus GT package contents:
- 1 x Aspire Nautilus GT Tank (atomizer)
- 1 x Nautilus 0.7 Ω Mesh coil preinstalled
- 1 x Extra Nautilus 1.6 Ω coil
- 1 x Pyrex glass tube
- 1 x Set of O-rings
- 1 x User manual
- 1 x Warranty card
- Size: 24 x 54 mm
- Capacity: 3 ml
- Coils: compatible with all Aspire Nautilus coils
- Excellent MTL atomizer
- Stainless Steel atomizer
- 5 Adjustable airflow: 1 - 1.2 - 1.5 - 1.8 - 2.5 mm
- Top radial fin heat sink design to decrease heat across all surfaces
- Mouth piece: 510 PPEI heat resistant material
- Uses the new Aspire Nautilus X coils with U-Tech technology for improved flavor
- Pyrex glass tube for a pure taste
- Thread: 510 thread and its size and style is designed to perfectly match any APV style battery
- Easy to clean