Threads
-
Locked
Vaporesso Swag PX80 Review by Aliraonz
Is me again with a new review. This time is the new SWAG PX80 kit, sent to me by Vaporesso. This device is a beauty and certainly a step forward in the pod market with some impressive new technology, outstanding flavour plus a stunning look. I am already in love with the SWAG PX80, but I will talk more about it soon. Is it my honour to share my personal opinions with our vaping community.
First some information taken from Vaporesso website. Picture attached.
Here is the link in case you want to know more:
Vaporesso » SWAG PX80
Inside the Box
Device
The body of the Swag PX80 is made of zinc alloy. At the top of the Swag PX80 we see the pod and battery cap, when the pod is removed we can see four strong magnets and connector pins, one side it has a beautiful leather panel with “Vaporesso” brand on the top right corner, at the front we see the fire button, the up and down buttons close together and the USB C port at the bottom, the other side we see a carbon fibre panel, at the back just see the ergonomic frame and at the bottom we see some warnings plus battery vents.
The device uses one 18650 battery in the same way than previous Swag models do, with a maximum of 80W. It has a clear red positive mark inside and on the battery cap it says “Do not use batteries with broken skin”, not negative marking on it. The cap and threads are smooth and easy to screw.
The airflow control is where the pod tank goes, at the top of the device. By rotating the pod one can adjust the airflow, going from full DL to RDL and maybe a very loose MTL. It works really well, my only concern here will be that the airflow could be blocked partially or completely depending on the hand size, not a problem in my case since I have small hands which is great.
Remember I mentioned one side of the Swag PX80 has a carbon fibre panel, when you first look at it you think this is nothing out of the ordinary but it is far from it, it houses a hidden 0.69” OLED screen which can only be seen when the mod is on, when it is fired or adjusted, Vaporesso achieve this by using IML (In-Mould Labelling), it is a very well thought idea and works flawlessly and looks great.
The display on the device is bright and colourful, the pictures do not show this accurately. It shows top left battery level, top right mode, wattage, resistance, voltage, puff counter, and my favourite it shows the recommended wattage for the coil installed.
To on and off the mod press fire button five times.
To enter the menu options, you press the up and down button at the same time. The menus have the following options:
To lock/unlock the device press fire button three times, the device can still fire up.
A very simple but effective display and menu with all you need for the operation of the Swag PX80.
Overall, I love the new Swag PX80, comfortable, well-constructed and one thing is for sure this device it is stunning and elegant.
Pod
The pod is made of PCTG with a 4ml capacity, the bottom of the pod is made out of metal with two kidney shape inlets to let the air in, these air slots work with the ones on the device to adjust the airflow. The metal base encases the plug in coils. Now here Vaporesso did a very innovative way to get the coils out.
To put a coil in just press until it is flat with the base of the pod, you will see the proprietary drip tip is pushed out showing a silver ring, turn the drip tip to the locked position to secure the coil in place. To remove the coil, move the drip tip to the unlock position, then push the drip tip which in turn will push the coil out enough to be removed and at the same time the juice flow will be closed. Very original. This explains why Vaporesso opted for a proprietary drip tip because this is what is use for the juice flow control.
There is it has a rubber plug at the bottom of the pod to fill. It is easy to open and hold while refilling, but there is no indication as to where to lift the plus which it almost made me pull the plug on the wrong end and I could have ended up breaking it. This could be improved.
The pod is crystal clear therefore is easy to see the liquid level.
The coils provided are:
Always remember to prime coils first, push the coil into the base, fill with juice of your choice and let it sit for at least 10 minutes. Just to make sure the coil is fully saturated.
I tried first the GTX 0.2Ω mesh coil, used it at 35W, cooler vape, and flavour was good. Then I used the GTX 0.2Ω mesh coil, started at 45w and went up in 5W increments, I liked around 50-55W, slightly thicker clouds, warmer vape and still good flavour. We all know how good the GTX coils are, and these ones did not disappoint me.
There is a wide variety of available coils that can be used with this pod, all belong to the GTX series.
SWAG PX80
Positives
In conclusion, I would highly recommend the new Swag PX80. It is a beautiful device, well-constructed, innovative in many ways (airflow, leakage protection, embedded screen etc) and has a variety of coils available. Did I mention stunning?
I want to thank Jasmine from Vaporesso for providing this device for this review.
First some information taken from Vaporesso website. Picture attached.
Here is the link in case you want to know more:
Vaporesso » SWAG PX80
Inside the Box
- SWAG PX80 Device
- SWAG Pod – It is a 4 ml pod
- 1 GTX 0.2Ω Mesh Coil
- 1 GTX 0.3Ω Mesh Coil
- Type-C USB cable
- User manual
- Warranty card
- Reminder card
Device
The body of the Swag PX80 is made of zinc alloy. At the top of the Swag PX80 we see the pod and battery cap, when the pod is removed we can see four strong magnets and connector pins, one side it has a beautiful leather panel with “Vaporesso” brand on the top right corner, at the front we see the fire button, the up and down buttons close together and the USB C port at the bottom, the other side we see a carbon fibre panel, at the back just see the ergonomic frame and at the bottom we see some warnings plus battery vents.
The device uses one 18650 battery in the same way than previous Swag models do, with a maximum of 80W. It has a clear red positive mark inside and on the battery cap it says “Do not use batteries with broken skin”, not negative marking on it. The cap and threads are smooth and easy to screw.
The airflow control is where the pod tank goes, at the top of the device. By rotating the pod one can adjust the airflow, going from full DL to RDL and maybe a very loose MTL. It works really well, my only concern here will be that the airflow could be blocked partially or completely depending on the hand size, not a problem in my case since I have small hands which is great.
Remember I mentioned one side of the Swag PX80 has a carbon fibre panel, when you first look at it you think this is nothing out of the ordinary but it is far from it, it houses a hidden 0.69” OLED screen which can only be seen when the mod is on, when it is fired or adjusted, Vaporesso achieve this by using IML (In-Mould Labelling), it is a very well thought idea and works flawlessly and looks great.
The display on the device is bright and colourful, the pictures do not show this accurately. It shows top left battery level, top right mode, wattage, resistance, voltage, puff counter, and my favourite it shows the recommended wattage for the coil installed.
To on and off the mod press fire button five times.
To enter the menu options, you press the up and down button at the same time. The menus have the following options:
- VW – Variable Wattage
- VV – Variable Volts
- Smart VW – Set the watts to suit the coil
- Puff – Show history of the last seven days
- Theme – Where you can change the colour of the screen (Green, Blue and Pink)
- Default
- Exit
To lock/unlock the device press fire button three times, the device can still fire up.
A very simple but effective display and menu with all you need for the operation of the Swag PX80.
Overall, I love the new Swag PX80, comfortable, well-constructed and one thing is for sure this device it is stunning and elegant.
Pod
The pod is made of PCTG with a 4ml capacity, the bottom of the pod is made out of metal with two kidney shape inlets to let the air in, these air slots work with the ones on the device to adjust the airflow. The metal base encases the plug in coils. Now here Vaporesso did a very innovative way to get the coils out.
To put a coil in just press until it is flat with the base of the pod, you will see the proprietary drip tip is pushed out showing a silver ring, turn the drip tip to the locked position to secure the coil in place. To remove the coil, move the drip tip to the unlock position, then push the drip tip which in turn will push the coil out enough to be removed and at the same time the juice flow will be closed. Very original. This explains why Vaporesso opted for a proprietary drip tip because this is what is use for the juice flow control.
There is it has a rubber plug at the bottom of the pod to fill. It is easy to open and hold while refilling, but there is no indication as to where to lift the plus which it almost made me pull the plug on the wrong end and I could have ended up breaking it. This could be improved.
The pod is crystal clear therefore is easy to see the liquid level.
The coils provided are:
- GTX 0.2Ω Mesh Coil – Rated for use between 45-60W
- GTX 0.3Ω Mesh Coil – Rated for use between 32-45W
Always remember to prime coils first, push the coil into the base, fill with juice of your choice and let it sit for at least 10 minutes. Just to make sure the coil is fully saturated.
I tried first the GTX 0.2Ω mesh coil, used it at 35W, cooler vape, and flavour was good. Then I used the GTX 0.2Ω mesh coil, started at 45w and went up in 5W increments, I liked around 50-55W, slightly thicker clouds, warmer vape and still good flavour. We all know how good the GTX coils are, and these ones did not disappoint me.
There is a wide variety of available coils that can be used with this pod, all belong to the GTX series.
SWAG PX80
Positives
- Small, excellent construction and beautiful finish. It feels good in the hand.
- Embedded IML screen, it is just stunning and so nice that is hidden.
- The menu is simple and easy to use.
- Nice clicky buttons.
- Adjustable airflow.
- Fast firing.
- A wide variety of coils available.
- Strong magnets.
- Pod is easy to fill.
- Juice flow control - Able to replace the coils with juice in the pod.
- Quad leakage protection.
- Can’t change the drip tip, but I can understand why we can change it.
- Fill port it doesn’t have any indication where to pull the rubber plug, I almost pull the wrong side which would have resulted in pulling the whole plug out. Not ideal.
- Being able to change the drip tip.
- Marking of the fill port rubber plus to indicate where to lift it.
- It will be great Vaporesso will come out with a 510 adapter.
In conclusion, I would highly recommend the new Swag PX80. It is a beautiful device, well-constructed, innovative in many ways (airflow, leakage protection, embedded screen etc) and has a variety of coils available. Did I mention stunning?
I want to thank Jasmine from Vaporesso for providing this device for this review.
-
Locked
Vaporesso Swag PX80 Review by Aliraonz
- By Aliraonz
- Device Reviews
- 6 Replies
Is me again with a new review. This time is the new SWAG PX80 kit, sent to me by Vaporesso. This device is a beauty and certainly a step forward in the pod market with some impressive new technology, outstanding flavour plus a stunning look. I am already in love with the SWAG PX80, but I will talk more about it soon. Is it my honour to share my personal opinions with our vaping community.
First some information taken from Vaporesso website. Picture attached.
Here is the link in case you want to know more:
Vaporesso » SWAG PX80
Inside the Box
Device
The body of the Swag PX80 is made of zinc alloy. At the top of the Swag PX80 we see the pod and battery cap, when the pod is removed we can see four strong magnets and connector pins, one side it has a beautiful leather panel with “Vaporesso” brand on the top right corner, at the front we see the fire button, the up and down buttons close together and the USB C port at the bottom, the other side we see a carbon fibre panel, at the back just see the ergonomic frame and at the bottom we see some warnings plus battery vents.
The device uses one 18650 battery in the same way than previous Swag models do, with a maximum of 80W. It has a clear red positive mark inside and on the battery cap it says “Do not use batteries with broken skin”, not negative marking on it. The cap and threads are smooth and easy to screw.
The airflow control is where the pod tank goes, at the top of the device. By rotating the pod one can adjust the airflow, going from full DL to RDL and maybe a very loose MTL. It works really well, my only concern here will be that the airflow could be blocked partially or completely depending on the hand size, not a problem in my case since I have small hands which is great.
Remember I mentioned one side of the Swag PX80 has a carbon fibre panel, when you first look at it you think this is nothing out of the ordinary but it is far from it, it houses a hidden 0.69” OLED screen which can only be seen when the mod is on, when it is fired or adjusted, Vaporesso achieve this by using IML (In-Mould Labelling), it is a very well thought idea and works flawlessly and looks great.
The display on the device is bright and colourful, the pictures do not show this accurately. It shows top left battery level, top right mode, wattage, resistance, voltage, puff counter, and my favourite it shows the recommended wattage for the coil installed.
To on and off the mod press fire button five times.
To enter the menu options, you press the up and down button at the same time. The menus have the following options:
To lock/unlock the device press fire button three times, the device can still fire up.
A very simple but effective display and menu with all you need for the operation of the Swag PX80.
Overall, I love the new Swag PX80, comfortable, well-constructed and one thing is for sure this device it is stunning and elegant.
Pod
The pod is made of PCTG with a 4ml capacity, the bottom of the pod is made out of metal with two kidney shape inlets to let the air in, these air slots work with the ones on the device to adjust the airflow. The metal base encases the plug in coils. Now here Vaporesso did a very innovative way to get the coils out.
To put a coil in just press until it is flat with the base of the pod, you will see the proprietary drip tip is pushed out showing a silver ring, turn the drip tip to the locked position to secure the coil in place. To remove the coil, move the drip tip to the unlock position, then push the drip tip which in turn will push the coil out enough to be removed and at the same time the juice flow will be closed. Very original. This explains why Vaporesso opted for a proprietary drip tip because this is what is use for the juice flow control.
There is it has a rubber plug at the bottom of the pod to fill. It is easy to open and hold while refilling, but there is no indication as to where to lift the plus which it almost made me pull the plug on the wrong end and I could have ended up breaking it. This could be improved.
The pod is crystal clear therefore is easy to see the liquid level.
The coils provided are:
I tried first the GTX 0.2Ω mesh coil, used it at 35W, cooler vape, and flavour was good. Then I used the GTX 0.2Ω mesh coil, started at 45w and went up in 5W increments, I liked around 50-55W, slightly thicker clouds, warmer vape and still good flavour. We all know how good the GTX coils are, and these ones did not disappoint me.
There is a wide variety of available coils that can be used with this pod, all belong to the GTX series.
SWAG PX80
Positives
In conclusion, I would highly recommend the new Swag PX80. It is a beautiful device, well-constructed, innovative in many ways (airflow, leakage protection, embedded screen etc) and has a variety of coils available. Did I mention stunning?
I want to thank Jasmine from Vaporesso for providing this device for this review.
First some information taken from Vaporesso website. Picture attached.
Here is the link in case you want to know more:
Vaporesso » SWAG PX80
Inside the Box
- SWAG PX80 Device
- SWAG Pod – It is a 4 ml pod
- 1 GTX 0.2Ω Mesh Coil
- 1 GTX 0.3Ω Mesh Coil
- Type-C USB cable
- User manual
- Warranty card
- Reminder card
Device
The body of the Swag PX80 is made of zinc alloy. At the top of the Swag PX80 we see the pod and battery cap, when the pod is removed we can see four strong magnets and connector pins, one side it has a beautiful leather panel with “Vaporesso” brand on the top right corner, at the front we see the fire button, the up and down buttons close together and the USB C port at the bottom, the other side we see a carbon fibre panel, at the back just see the ergonomic frame and at the bottom we see some warnings plus battery vents.
The device uses one 18650 battery in the same way than previous Swag models do, with a maximum of 80W. It has a clear red positive mark inside and on the battery cap it says “Do not use batteries with broken skin”, not negative marking on it. The cap and threads are smooth and easy to screw.
The airflow control is where the pod tank goes, at the top of the device. By rotating the pod one can adjust the airflow, going from full DL to RDL and maybe a very loose MTL. It works really well, my only concern here will be that the airflow could be blocked partially or completely depending on the hand size, not a problem in my case since I have small hands which is great.
Remember I mentioned one side of the Swag PX80 has a carbon fibre panel, when you first look at it you think this is nothing out of the ordinary but it is far from it, it houses a hidden 0.69” OLED screen which can only be seen when the mod is on, when it is fired or adjusted, Vaporesso achieve this by using IML (In-Mould Labelling), it is a very well thought idea and works flawlessly and looks great.
The display on the device is bright and colourful, the pictures do not show this accurately. It shows top left battery level, top right mode, wattage, resistance, voltage, puff counter, and my favourite it shows the recommended wattage for the coil installed.
To on and off the mod press fire button five times.
To enter the menu options, you press the up and down button at the same time. The menus have the following options:
- VW – Variable Wattage
- VV – Variable Volts
- Smart VW – Set the watts to suit the coil
- Puff – Show history of the last seven days
- Theme – Where you can change the colour of the screen (Green, Blue and Pink)
- Default
- Exit
To lock/unlock the device press fire button three times, the device can still fire up.
A very simple but effective display and menu with all you need for the operation of the Swag PX80.
Overall, I love the new Swag PX80, comfortable, well-constructed and one thing is for sure this device it is stunning and elegant.
Pod
The pod is made of PCTG with a 4ml capacity, the bottom of the pod is made out of metal with two kidney shape inlets to let the air in, these air slots work with the ones on the device to adjust the airflow. The metal base encases the plug in coils. Now here Vaporesso did a very innovative way to get the coils out.
To put a coil in just press until it is flat with the base of the pod, you will see the proprietary drip tip is pushed out showing a silver ring, turn the drip tip to the locked position to secure the coil in place. To remove the coil, move the drip tip to the unlock position, then push the drip tip which in turn will push the coil out enough to be removed and at the same time the juice flow will be closed. Very original. This explains why Vaporesso opted for a proprietary drip tip because this is what is use for the juice flow control.
There is it has a rubber plug at the bottom of the pod to fill. It is easy to open and hold while refilling, but there is no indication as to where to lift the plus which it almost made me pull the plug on the wrong end and I could have ended up breaking it. This could be improved.
The pod is crystal clear therefore is easy to see the liquid level.
The coils provided are:
- GTX 0.2Ω Mesh Coil – Rated for use between 45-60W
- GTX 0.3Ω Mesh Coil – Rated for use between 32-45W
I tried first the GTX 0.2Ω mesh coil, used it at 35W, cooler vape, and flavour was good. Then I used the GTX 0.2Ω mesh coil, started at 45w and went up in 5W increments, I liked around 50-55W, slightly thicker clouds, warmer vape and still good flavour. We all know how good the GTX coils are, and these ones did not disappoint me.
There is a wide variety of available coils that can be used with this pod, all belong to the GTX series.
SWAG PX80
Positives
- Small, excellent construction and beautiful finish. It feels good in the hand.
- Embedded IML screen, it is just stunning and so nice that is hidden.
- The menu is simple and easy to use.
- Nice clicky buttons.
- Adjustable airflow.
- Fast firing.
- A wide variety of coils available.
- Strong magnets.
- Pod is easy to fill.
- Juice flow control - Able to replace the coils with juice in the pod.
- Quad leakage protection.
- Can’t change the drip tip, but I can understand why we can change it.
- Fill port it doesn’t have any indication where to pull the rubber plug, I almost pull the wrong side which would have resulted in pulling the whole plug out. Not ideal.
- Being able to change the drip tip.
- Marking of the fill port rubber plus to indicate where to lift it.
- It will be great Vaporesso will come out with a 510 adapter.
In conclusion, I would highly recommend the new Swag PX80. It is a beautiful device, well-constructed, innovative in many ways (airflow, leakage protection, embedded screen etc) and has a variety of coils available. Did I mention stunning?
I want to thank Jasmine from Vaporesso for providing this device for this review.
-
Locked
Lost Vape UB Lite Pod Kit
- By Frenkyou
- Device Reviews
- 1 Replies
Lost Vape UB Lite Pod Kit
I can anticipate that Lost Vape UB Lite Pod Kit in MTL mode really surprised me!
In this last period we have been invaded by an infinity of useless Pod systems, most of these devices do not have intelligent control functions and cannot satisfy users at the level of AFC adjustments. Furthermore, the "basic" systems with disposable cartridges often do not offer good performance, the stroke in the throat and the aromatic restitution are in most cases limited, forcing the user to use very "charged" liquids.
Lost vape has solved all these problems by creating UB Lite Pod Kit, the device uses three new replaceable coils with Restricted Direct to Lung (RDL) and Mouth To Lung (MTL) performance in the arc of use comparable to those of the best tanks.
UB Lite Pod Kit with its 1,000mAh battery that is recharged via the USB Type C port is capable of delivering up to 30W, but the power is nothing without control, so Lost Vape has devised a simple but really very much AFC system effective able to ensure a puff in the same way very narrow or discreetly open.
The UB Lite Pod Kit chipset offers the possibility of vaping both in automatic mode and in "fire button" mode with the useful function of being able to exclude the button by blocking it. In addition, the kit despite not having a display, is suitable for the user, in fact it has a Smart recognition function, with the LED that changes color when the cartridge is inserted, associating a preset color to each coil.
Enjoy the reading.
The white cardboard packaging on the front; the Lost Vape logo and the indication on the chipset used (Quest), the image of the device and its name (UB Lite Pod Kit).
On the back are shown; the content, warnings, social networks for promotional activities, place of origin, color of the product inside the box, scratch & check, finally logos & brands.
On the side you can read the slogan "The Modern Demarcation" and some main features of this Item.
UB Lite Pod Kit Standard:
1x Ultra Boost S pod device
1x Pod (2ml pre-installed)
1x Ultra Boost Lite Mesh-Coil L5 1.4Ω (8-10W) MTL
1x Ultra Boost Lite Mesh-Coil L1 0.4Ω (20-30W) DL
1x USB Type-C Cable
1x User Manual
1x Warranty card
1x Lanyard
Measurements and features:
• Body material: Aluminum
• Dimensions: 115x20.6x19.8mm
• Weight: 47.5g
• Battery: 1000 mAh (integrated)
• Battery voltage: 3.0V-4.2V
• Output voltage: 3.0V-4.0V
• Power range: 7-30W
• Current range: 2.0A-9.0A
• Supported Coil Range: 0.3-3.0Ω
• AFC: Adjustable
• Refil: Side
There are 7 color options to choose from:
Galaxy Blue, Fantasy Pink, Magic Red, Tiffany Green, Midnight Black, Mystic Gunmetal and Space Silver.
First impressions:
I was expecting the usual system with "disposable" cartridges luckily I was proved wrong, in fact UB Lite Pod Kit uses a new version of replaceable Mesh-Coils of the Ultra Boost Lite series, this relieved me because I had the opportunity to try other products similar to this one from Lost Vape like Aspire's AVP Cube which are undoubtedly more evolved than a basic system.
In addition to the two different coils supplied, Lost Vape sent me another one to try and this pleased me, so I can give a more in-depth evaluation.
I was sent two samples, one in "Tiffany Green" and the other in "Space Silver". The whole range has sober and attractive colors with well executed finishes.
At first glance UB Lite Pod Kit has a very simple design with the classic tube shape but with a flat side, the construction is made of aluminum so it is a sufficiently robust and light device, portability is naturally magnificent, included in the package there is also a lanyard with a sturdy rubber ring
The flattened front side is finely finished with a texture of transversal lines barely perceptible to the touch, the upper part has a reference inlet for the direction of insertion of the cartridge. Centrally there is the Led and the small metal Fire button slightly protruding and round shape, at the bottom there is the Lost Vape logo and the writing "UB LITE"
On the back there is the AFC system with a small metal adjustment knob, the RDL writing indicates the direction to follow to obtain an open vape, while the MTL writing indicates a choice of restricted puff, then there are many small notches that indicate intermediate options for fine and precise adjustment.
-
Locked
BP MODS Bushido V3 RDA and Bushido Mod - Review
- By Tim Wiseman
- Device Reviews
- 3 Replies
Hi ECF members, In this review i take a look at both the BP MODS Bushido V3 RDA and Bushido Mod. The BP MODS Bushido V3 RDA and Bushido Mod was supplied for the purpose of this review by Dovpo.
https://www.dovpoecig.com/products/bushi...0593203242
https://www.dovpoecig.com/products/bushi...3002044458
Introduction
It was only last year the well known vape designer who goes by the name "Bruce" set up BP Mods in partnership with Dovpo and in this review i take a look at V3 and the first under the BP Mods brand of the Bushido RDA along with their new BF Bushido Mechanical Mod designed bearing 22mm RDA's such as the Bushido V3 in mind. Both the Bushido Mod and V3 RDA are products of note on their individual merits but i can see many buying both to use as a set-up so made perfect sense to me to include both within the same review, let's crack on!
___________________________________________________________________
In The Box Bushido V3 RDA
Contents:
1x BP MODS Bushido V3 RDA
1x BF Pin & Insulator
1x Pin Wrench
1x Accessories Pack
Includes 2x Clapton 0.35ohm A1 26ga x2 + Ni80 40ga 2,5ID
2x User Cards
___________________________________________________________________
In The Box Bushido Mod
Contents:
1 x Squonk Bushido Mechanical Mod
1 x Slat
1 x Spare Squonk Bottle
1 x Spare Fire Button Contact
1 x Accessory Pack
2 x User Cards
___________________________________________________________________
Aesthetics and Ergonomics
Both products come in the same style Orange packaging that all BP Mods products are packed in and on opening everything is well presented. I received the DLC Black + Gun metal RDA, the options are DLC Gray + Genuine Gold, Frosted Silver + Glossy Silver and DLC Black + Gun metal and the Mod i received was the Everglade Green colour, the options are Space Gray, Everglade Green, Tangerine and Grape.
The Bushido V3 RDA is a very clean looking short 22mm RDA with no visible branding on it's outer sleeve just a narrow airflow slot either side. Up top we have a smoked frosted 510 drip tip and then a flip open top section that tapers upwards towards the drip tip. The main body of the RDA has a matt DLC finish while the top section has a metallic band which breaks the colour up nicely. Moving to the base we have safety stamps and branding and pre-installed is a standard Gold plated, Brass 510 pin that protrudes enough to be safe on mechanical devices.
Just like the V3 RDA the Bushido Mod is a small plain yet stylish looking box shaped mod which has a very clean look both aesthetically and internally. Although the traditional box shaped we have rounded edging giving no sharp edges whatsoever!
On one side we have the rectangular cut-out to allow access to press your bottle and on the reverse side a small round cut-out top right allowing access to the slotted dial that controls the switch lock mechanism, both panels are removable. On the face we have a round protruding fire bottom with raised BP Mods logo and outer Ultem edging, it has just over average travel and really nice feel.
Up top we have a 22mm Stainless Steel plate with a Gold plated, spring loaded BF 510 pin. The plate is raised just enough to protect the mods finish while not giving issues with annoying gapping! Moving to the base we have printed safety marks and a threaded plate with fold out lever which allows access to fill the bottle.
The Bushido Mod is made of Aluminium and it's small size and rounded edging makes it a nice out and about BF companion!
___________________________________________________________________
Bushido Mod Specs and Features:
Material: Aluminium alloy
Dimensions: 74 x 44 x 23.6mm
Bottle capacity: 4.8ml
Battery: Single 18650 battery(Not included)
Compatible with: 22mm BF RDAs
Features:
-Powered by single 18650 battery
-Turn the mod over and unscrew the cap to refill the squonk bottle, more convenient
-Specialized for 22mm BF RDAs
-Aluminium alloy construction
Colours: Space Gray, Everglade Green, Tangerine, Grape
___________________________________________________________________
Bushido Mod: What You Receive?
As well as the device with the pre-installed bottle assembly you receive a host of spare parts which includes a spare bottle and tubing, contact plate, locking block and torx screwdriver. You also receive a couple of 2 sided information cards which gives a wealth of information including the size of screws and O-rings used. Also included is a number of O-rings and spare screws!
___________________________________________________________________
Inside The Mod
It's very clean looking and has the simple design of having your battery plate attached to a contact plate which makes contact (completing the cycle) when the fire button is pressed which moves the attached contact plate to the contact 510 assembly! The panel to gain access removes via a tab at the bottom and secures in place with a combination of precision fitting and magnets, there is no movement whatsoever! I will also take this opportunity to point out just how nice looking the fire button is. it's subjective but i am quite mesmerised by it, gorgeous and i don't know why!
The reverse panel also removes which allows better access to the locking dial and also a cut-out to help with battery removal, likewise this panel fits very securely!
___________________________________________________________________
The Lock Mechanism
Between the contact plate and contact assembly we have a rectangular insulated block which can be turned using a dial. When it's in an horizontal position it blocks the contact plate from making contact preventing firing, when turned to the vertical position the contact plate has nothing preventing connection and the device can be fired.
The locking mechanism is controlled as mentioned by turning a dial and to the top right of the device opposite the side where the bottle is pressed we have that dial with centre slot so it can be turned using a screwdriver or coin. If the panel is removed we see the dial is quite substantial and has aggressive knurling so now it can be turned using your fingers!
___________________________________________________________________
The Bottle Assembly
When taking the side panel off the device it looks to have the traditional style of squeeze bottle that attaches to the 510 feed pipe via tubing. This does have a twist though and once removed we can see the tubing attaches to a top section with attached pipe with juice intakes that extends down to the base of the bottle and the base of the plastic bottle itself has been cut away! At the bottom of the pipe we have a circular plate with large fill ports and then a retainer ring which seals the outside of the base of the bottle and fill plate together!
___________________________________________________________________
Filling The Bottle
That open ended bottle of course needs to be sealed and on the bottom of the device we have a threaded plate more commonly used to fit a battery. The plate has a fold out central lever to turn the plate to both open and secure and when the lever is pulled out we can see underneath is a small round magnet which will keep it from flapping about when the device is in use.
The plate includes a protruding section that completes the bottles seal and when removed we are met by what looks just like the top of an RTA or tank after removing the top-cap for an easy fill from any nozzle type!
___________________________________________________________________
Fitting The Battery
As mentioned the panel can be removed via the notch at the bottom of the device and we have squonk bottle one side and the negative and positive contacts the other. I had no issues fitting a battery, it fitted snuggly without threatening to damage the rap and as mentioned you can remove the reverse panel to poke your battery out when it needs removing.
Battery orientation is clearly labelled in White and we have no movement whatsoever from battery, panel or internals even when shaking vigorously!
___________________________________________________________________
Bushido V3 RDA Specs and Features:
Size: 22 x 33mm
Thread: 510 thread
Coil: Single Coil
Drip Tip: 510
Easy to top refill system
Flip top cap design
Lateral dual airflow control
Deep juice well
22mm diameter for single coil
Colours: DLC Gray + Genuine Gold, Frosted Silver + Glossy Silver, DLC Black + Gun metal
___________________________________________________________________
Bushido V3 RDA, What You Receive?
AS well as the Bushido V3 with standard pin you also receive a BF pin and insulator. You get the usual informative cards which includes all screw and O-ring sizes and a Pin wrench. Included in the accessories bag is multiple O-rings and post screws and also 2 Clapton coils with full specs given on one of the information cards!
___________________________________________________________________
It's Various Parts!
Up top we have a smoked frosted drip tip which is a 510 fitting so you can fit an alternative if you prefer. We then have a flip open top-cap with a little arrow head showing which side to push the drip tip to open the cap, it does need a good push so i have no real concerns about it opening by accident.
The top-cap section unscrews which then allows the separation of inner and outer sleeves and to be honest until the top was unscrewed i thought it was just one sleeve with no adjustment as it wouldn't turn but once adding some VG to the O-rings it now adjusts with a nice tolerance. Both inner and outer sleeve sections have dual narrow airflow slots that are lined up for fully open airflow or the outer sleeve can be turned to reduce the open slot.
The base section with deck has the interesting airflow inlets on either side and a two post deck with screwhead clamps and deep wells. Pre-installed we have a standard 510 pin which i immediately swapped out for the supplied BF pin!
___________________________________________________________________
The Airflow
On the outside of the base either side we have set back slots that channel airflow at an upwards angle to the outlet slot on each post to hit the bottom and lower side of your coil. The indented slots and the sloping to them also allow for possible future inserts which i have heard their will be some as a separate purchase to give MTL draw alternatives.
The narrow airflow slots on the sleeves line up with the top sloped sections that leads to the airflow inlet slots on the base and then the outer sleeve can be turned against the inner sleeve to open or reduce airflow. So the airflow comes in through the slots at a downwards angle to the slots on the base section then travels at an upwards angle through the posts giving a "tick" design!
___________________________________________________________________
The Deck and Build!
I did the build with the aid of another new BP Mods product, the Futon Ohm Tab which as far as i am aware is the first tab to be released for quite a while and must say is better than the 3 older ones i own. It offers three modes which of course is your ohm reader, wattage and voltage and has a side fire button to pulse your coil/coils, it accommodates a single 18650 battery!
https://www.dovpoecig.com/products/futon...3195015210
The deck has posts facing each other with a slot airflow outlet on one side of each post and the other side is where you fit your coil leads with slotted screw heads acting as clamps. We have a lip either side to where the screws fasten down to stop the leads popping out while securing and we also have a curved cut-out on each side of the deck to fit a coiling rod which actually on this occasion i would recommend making use of as it lines up the height of the coil perfectly to the airflow outlets to get both bottom and side airflow! Once your leads are secured down and you are happy with the position of your coil then snip the access.
I used one of the supplied coils which i pulsed at 15w to burn off any residue but didn't have any hotspots so no strumming necessary! Also to point out the supplied coils which are 0.35ohm claptons, kanthal with outer Ni80 binding have the leads facing both the same way so i needed to add half a wrap to fit but i believe the specs that have been given takes this into account as my build came out at 0.34ohms. Also up to a 3.0ID coil will work well but looking at the 2.5ID coil i used it does look the optimum size for this RDA!
Wicking is straightforward and with the deep wells you can cut your ends leaving quite a bit of cotton, i didn't thin out but just fluffed up before placing in the wells. I then just double checked the leads were still fastened tight, primed my wicks and gave it a few pulses to admire my work (someone has to)!
___________________________________________________________________
My Thoughts! And How It Vapes?
When it comes to mechanical devices i am not technically minded so kudos to those with superior knowledge while those that just vape and either find something gives a good vape or not are not going to get overwhelmed by talk of voltage drops and the like, i could try to sound intelligent but many will see right through it!
I only use RDA's with a BF pin and although i have a few regulated BF devices i really like i haven't really liked anything better than the original Pulse as far as mechanical BF offerings i have tried, some have been ok but nothing i would continue to use!
The Bushido though i really like, it feels great in the hand and i love both the look and feel of the fire button even if the travel is a bit longer than average! I also like the simplistic but excellently executed lock mechanism and clean looking internals and basic design, even i would be able to strip this down and be confident of putting it back together no problem! Being purpose made for 22mm RDA's is a drawback for those who might be looking for a BF device to use with different sized RDA's although at 23.6mm a 24mm is only going to have slight overhang. I also like the idea of just unscrewing the bottom plate to fill instead of removing the bottle, it does work well as long as you remember to wait until you detect your cotton drying out first because if you tip it upside down to fill with full juice wells then i can leave that to your imagination! The only real con for me is the bottle juice capacity which is 4.8ml when capacity in general with BF devices have been getting greater but then this is a nice small device so it's a trade off!
Although i have been using the Bushido V3 RDA with the Bushido BF Mod, features such as deep juice wells and leak resistant airflow designs also benefit dripping and bearing that in mind i do like the flip open top, i don't drip so would never use it but for those that do it's a great if not original feature which has been implemented well! The airflow adjusts with a nice tolerance although due to the distance between the sleeves and set back airflow slots on the base it doesn't give the greatest range of airflow choices as even when closed almost right down it gives a medium RDL draw with a semi restricted (just shy of full on DL) when fully open. After saying that the V3 gives such a nice smooth vape which will suit builds from 0.2ohm - 0.5ohm and the flavour is fantastic. We also get slight gapping with the drip tip which will go as a con although it honestly doesn't bother me so use the photos to make up your own mind, of course you can fit your own 510 but with the lip some might look a bit funky!
When it comes to the build it really is a piece of cake as is the wicking which allows for a generous amount of cotton. Two decent clapton coils are included and in general i am happy with what is included with both the Mod and RDA and love that all screw and O-ring sizes are given!
The Bushido BF Mechanical Mod and Bushido V3 RDA work so well together, the pliability of the bottle is soft without being too soft and i had no issues with leaking of any sorts it just seemed to tell me when to press the bottle for a continuous favourable vape working in tandem perfectly!
___________________________________________________________________
Likes
Both High quality, clean looking products
Mod Aluminium construction
Slightly raised 510 plate (just the right amount)
Orientation marked in White
Easy installing and removal of battery
Well implemented fire button locking mechanism
Absolutely love the fire button
Bottom fill via threaded plate with central lever
Perfect pliability to bottle (in my opinion)
Plenty of spares including bottle and contact plate
Easy build deck
BF pin included
2 Clapton coils included
Leak resistant airflow "tick" design
Flip lid for dripping
510 drip tip fitting (fit your own)
Gives smooth consistent vape
Experienced excellent flavour
Worked excellently as a BF RDA
Equally suited for dripping
Included information cards very informative and also gives screw and O-ring sizes
Cons
4.8ml Bottle Capacity
Need to make sure no liquid is in juice wells before filling
Can't fit large RDA's
Not a great range of airflow
Gapping with drip-tip (didn't personally bother me)
I would once again like to thank Dovpo for supplying the BP MODS Bushido V3 RDA and Bushido Mod for the purpose of this review, thanks for reading and stay safe!
https://www.dovpoecig.com/products/bushi...0593203242
https://www.dovpoecig.com/products/bushi...3002044458
___________________________________________________________________
https://www.dovpoecig.com/products/bushi...0593203242
https://www.dovpoecig.com/products/bushi...3002044458
Introduction
It was only last year the well known vape designer who goes by the name "Bruce" set up BP Mods in partnership with Dovpo and in this review i take a look at V3 and the first under the BP Mods brand of the Bushido RDA along with their new BF Bushido Mechanical Mod designed bearing 22mm RDA's such as the Bushido V3 in mind. Both the Bushido Mod and V3 RDA are products of note on their individual merits but i can see many buying both to use as a set-up so made perfect sense to me to include both within the same review, let's crack on!
___________________________________________________________________
In The Box Bushido V3 RDA
Contents:
1x BP MODS Bushido V3 RDA
1x BF Pin & Insulator
1x Pin Wrench
1x Accessories Pack
Includes 2x Clapton 0.35ohm A1 26ga x2 + Ni80 40ga 2,5ID
2x User Cards
___________________________________________________________________
In The Box Bushido Mod
Contents:
1 x Squonk Bushido Mechanical Mod
1 x Slat
1 x Spare Squonk Bottle
1 x Spare Fire Button Contact
1 x Accessory Pack
2 x User Cards
___________________________________________________________________
Aesthetics and Ergonomics
Both products come in the same style Orange packaging that all BP Mods products are packed in and on opening everything is well presented. I received the DLC Black + Gun metal RDA, the options are DLC Gray + Genuine Gold, Frosted Silver + Glossy Silver and DLC Black + Gun metal and the Mod i received was the Everglade Green colour, the options are Space Gray, Everglade Green, Tangerine and Grape.
The Bushido V3 RDA is a very clean looking short 22mm RDA with no visible branding on it's outer sleeve just a narrow airflow slot either side. Up top we have a smoked frosted 510 drip tip and then a flip open top section that tapers upwards towards the drip tip. The main body of the RDA has a matt DLC finish while the top section has a metallic band which breaks the colour up nicely. Moving to the base we have safety stamps and branding and pre-installed is a standard Gold plated, Brass 510 pin that protrudes enough to be safe on mechanical devices.
Just like the V3 RDA the Bushido Mod is a small plain yet stylish looking box shaped mod which has a very clean look both aesthetically and internally. Although the traditional box shaped we have rounded edging giving no sharp edges whatsoever!
On one side we have the rectangular cut-out to allow access to press your bottle and on the reverse side a small round cut-out top right allowing access to the slotted dial that controls the switch lock mechanism, both panels are removable. On the face we have a round protruding fire bottom with raised BP Mods logo and outer Ultem edging, it has just over average travel and really nice feel.
Up top we have a 22mm Stainless Steel plate with a Gold plated, spring loaded BF 510 pin. The plate is raised just enough to protect the mods finish while not giving issues with annoying gapping! Moving to the base we have printed safety marks and a threaded plate with fold out lever which allows access to fill the bottle.
The Bushido Mod is made of Aluminium and it's small size and rounded edging makes it a nice out and about BF companion!
___________________________________________________________________
Bushido Mod Specs and Features:
Material: Aluminium alloy
Dimensions: 74 x 44 x 23.6mm
Bottle capacity: 4.8ml
Battery: Single 18650 battery(Not included)
Compatible with: 22mm BF RDAs
Features:
-Powered by single 18650 battery
-Turn the mod over and unscrew the cap to refill the squonk bottle, more convenient
-Specialized for 22mm BF RDAs
-Aluminium alloy construction
Colours: Space Gray, Everglade Green, Tangerine, Grape
___________________________________________________________________
Bushido Mod: What You Receive?
As well as the device with the pre-installed bottle assembly you receive a host of spare parts which includes a spare bottle and tubing, contact plate, locking block and torx screwdriver. You also receive a couple of 2 sided information cards which gives a wealth of information including the size of screws and O-rings used. Also included is a number of O-rings and spare screws!
___________________________________________________________________
Inside The Mod
It's very clean looking and has the simple design of having your battery plate attached to a contact plate which makes contact (completing the cycle) when the fire button is pressed which moves the attached contact plate to the contact 510 assembly! The panel to gain access removes via a tab at the bottom and secures in place with a combination of precision fitting and magnets, there is no movement whatsoever! I will also take this opportunity to point out just how nice looking the fire button is. it's subjective but i am quite mesmerised by it, gorgeous and i don't know why!
The reverse panel also removes which allows better access to the locking dial and also a cut-out to help with battery removal, likewise this panel fits very securely!
___________________________________________________________________
The Lock Mechanism
Between the contact plate and contact assembly we have a rectangular insulated block which can be turned using a dial. When it's in an horizontal position it blocks the contact plate from making contact preventing firing, when turned to the vertical position the contact plate has nothing preventing connection and the device can be fired.
The locking mechanism is controlled as mentioned by turning a dial and to the top right of the device opposite the side where the bottle is pressed we have that dial with centre slot so it can be turned using a screwdriver or coin. If the panel is removed we see the dial is quite substantial and has aggressive knurling so now it can be turned using your fingers!
___________________________________________________________________
The Bottle Assembly
When taking the side panel off the device it looks to have the traditional style of squeeze bottle that attaches to the 510 feed pipe via tubing. This does have a twist though and once removed we can see the tubing attaches to a top section with attached pipe with juice intakes that extends down to the base of the bottle and the base of the plastic bottle itself has been cut away! At the bottom of the pipe we have a circular plate with large fill ports and then a retainer ring which seals the outside of the base of the bottle and fill plate together!
___________________________________________________________________
Filling The Bottle
That open ended bottle of course needs to be sealed and on the bottom of the device we have a threaded plate more commonly used to fit a battery. The plate has a fold out central lever to turn the plate to both open and secure and when the lever is pulled out we can see underneath is a small round magnet which will keep it from flapping about when the device is in use.
The plate includes a protruding section that completes the bottles seal and when removed we are met by what looks just like the top of an RTA or tank after removing the top-cap for an easy fill from any nozzle type!
___________________________________________________________________
Fitting The Battery
As mentioned the panel can be removed via the notch at the bottom of the device and we have squonk bottle one side and the negative and positive contacts the other. I had no issues fitting a battery, it fitted snuggly without threatening to damage the rap and as mentioned you can remove the reverse panel to poke your battery out when it needs removing.
Battery orientation is clearly labelled in White and we have no movement whatsoever from battery, panel or internals even when shaking vigorously!
___________________________________________________________________
Bushido V3 RDA Specs and Features:
Size: 22 x 33mm
Thread: 510 thread
Coil: Single Coil
Drip Tip: 510
Easy to top refill system
Flip top cap design
Lateral dual airflow control
Deep juice well
22mm diameter for single coil
Colours: DLC Gray + Genuine Gold, Frosted Silver + Glossy Silver, DLC Black + Gun metal
___________________________________________________________________
Bushido V3 RDA, What You Receive?
AS well as the Bushido V3 with standard pin you also receive a BF pin and insulator. You get the usual informative cards which includes all screw and O-ring sizes and a Pin wrench. Included in the accessories bag is multiple O-rings and post screws and also 2 Clapton coils with full specs given on one of the information cards!
___________________________________________________________________
It's Various Parts!
Up top we have a smoked frosted drip tip which is a 510 fitting so you can fit an alternative if you prefer. We then have a flip open top-cap with a little arrow head showing which side to push the drip tip to open the cap, it does need a good push so i have no real concerns about it opening by accident.
The top-cap section unscrews which then allows the separation of inner and outer sleeves and to be honest until the top was unscrewed i thought it was just one sleeve with no adjustment as it wouldn't turn but once adding some VG to the O-rings it now adjusts with a nice tolerance. Both inner and outer sleeve sections have dual narrow airflow slots that are lined up for fully open airflow or the outer sleeve can be turned to reduce the open slot.
The base section with deck has the interesting airflow inlets on either side and a two post deck with screwhead clamps and deep wells. Pre-installed we have a standard 510 pin which i immediately swapped out for the supplied BF pin!
___________________________________________________________________
The Airflow
On the outside of the base either side we have set back slots that channel airflow at an upwards angle to the outlet slot on each post to hit the bottom and lower side of your coil. The indented slots and the sloping to them also allow for possible future inserts which i have heard their will be some as a separate purchase to give MTL draw alternatives.
The narrow airflow slots on the sleeves line up with the top sloped sections that leads to the airflow inlet slots on the base and then the outer sleeve can be turned against the inner sleeve to open or reduce airflow. So the airflow comes in through the slots at a downwards angle to the slots on the base section then travels at an upwards angle through the posts giving a "tick" design!
___________________________________________________________________
The Deck and Build!
I did the build with the aid of another new BP Mods product, the Futon Ohm Tab which as far as i am aware is the first tab to be released for quite a while and must say is better than the 3 older ones i own. It offers three modes which of course is your ohm reader, wattage and voltage and has a side fire button to pulse your coil/coils, it accommodates a single 18650 battery!
https://www.dovpoecig.com/products/futon...3195015210
The deck has posts facing each other with a slot airflow outlet on one side of each post and the other side is where you fit your coil leads with slotted screw heads acting as clamps. We have a lip either side to where the screws fasten down to stop the leads popping out while securing and we also have a curved cut-out on each side of the deck to fit a coiling rod which actually on this occasion i would recommend making use of as it lines up the height of the coil perfectly to the airflow outlets to get both bottom and side airflow! Once your leads are secured down and you are happy with the position of your coil then snip the access.
I used one of the supplied coils which i pulsed at 15w to burn off any residue but didn't have any hotspots so no strumming necessary! Also to point out the supplied coils which are 0.35ohm claptons, kanthal with outer Ni80 binding have the leads facing both the same way so i needed to add half a wrap to fit but i believe the specs that have been given takes this into account as my build came out at 0.34ohms. Also up to a 3.0ID coil will work well but looking at the 2.5ID coil i used it does look the optimum size for this RDA!
Wicking is straightforward and with the deep wells you can cut your ends leaving quite a bit of cotton, i didn't thin out but just fluffed up before placing in the wells. I then just double checked the leads were still fastened tight, primed my wicks and gave it a few pulses to admire my work (someone has to)!
___________________________________________________________________
My Thoughts! And How It Vapes?
When it comes to mechanical devices i am not technically minded so kudos to those with superior knowledge while those that just vape and either find something gives a good vape or not are not going to get overwhelmed by talk of voltage drops and the like, i could try to sound intelligent but many will see right through it!
I only use RDA's with a BF pin and although i have a few regulated BF devices i really like i haven't really liked anything better than the original Pulse as far as mechanical BF offerings i have tried, some have been ok but nothing i would continue to use!
The Bushido though i really like, it feels great in the hand and i love both the look and feel of the fire button even if the travel is a bit longer than average! I also like the simplistic but excellently executed lock mechanism and clean looking internals and basic design, even i would be able to strip this down and be confident of putting it back together no problem! Being purpose made for 22mm RDA's is a drawback for those who might be looking for a BF device to use with different sized RDA's although at 23.6mm a 24mm is only going to have slight overhang. I also like the idea of just unscrewing the bottom plate to fill instead of removing the bottle, it does work well as long as you remember to wait until you detect your cotton drying out first because if you tip it upside down to fill with full juice wells then i can leave that to your imagination! The only real con for me is the bottle juice capacity which is 4.8ml when capacity in general with BF devices have been getting greater but then this is a nice small device so it's a trade off!
Although i have been using the Bushido V3 RDA with the Bushido BF Mod, features such as deep juice wells and leak resistant airflow designs also benefit dripping and bearing that in mind i do like the flip open top, i don't drip so would never use it but for those that do it's a great if not original feature which has been implemented well! The airflow adjusts with a nice tolerance although due to the distance between the sleeves and set back airflow slots on the base it doesn't give the greatest range of airflow choices as even when closed almost right down it gives a medium RDL draw with a semi restricted (just shy of full on DL) when fully open. After saying that the V3 gives such a nice smooth vape which will suit builds from 0.2ohm - 0.5ohm and the flavour is fantastic. We also get slight gapping with the drip tip which will go as a con although it honestly doesn't bother me so use the photos to make up your own mind, of course you can fit your own 510 but with the lip some might look a bit funky!
When it comes to the build it really is a piece of cake as is the wicking which allows for a generous amount of cotton. Two decent clapton coils are included and in general i am happy with what is included with both the Mod and RDA and love that all screw and O-ring sizes are given!
The Bushido BF Mechanical Mod and Bushido V3 RDA work so well together, the pliability of the bottle is soft without being too soft and i had no issues with leaking of any sorts it just seemed to tell me when to press the bottle for a continuous favourable vape working in tandem perfectly!
___________________________________________________________________
Likes
Both High quality, clean looking products
Mod Aluminium construction
Slightly raised 510 plate (just the right amount)
Orientation marked in White
Easy installing and removal of battery
Well implemented fire button locking mechanism
Absolutely love the fire button
Bottom fill via threaded plate with central lever
Perfect pliability to bottle (in my opinion)
Plenty of spares including bottle and contact plate
Easy build deck
BF pin included
2 Clapton coils included
Leak resistant airflow "tick" design
Flip lid for dripping
510 drip tip fitting (fit your own)
Gives smooth consistent vape
Experienced excellent flavour
Worked excellently as a BF RDA
Equally suited for dripping
Included information cards very informative and also gives screw and O-ring sizes
Cons
4.8ml Bottle Capacity
Need to make sure no liquid is in juice wells before filling
Can't fit large RDA's
Not a great range of airflow
Gapping with drip-tip (didn't personally bother me)
I would once again like to thank Dovpo for supplying the BP MODS Bushido V3 RDA and Bushido Mod for the purpose of this review, thanks for reading and stay safe!
https://www.dovpoecig.com/products/bushi...0593203242
https://www.dovpoecig.com/products/bushi...3002044458
___________________________________________________________________
-
Locked
Vaporesso PX80 review by Javichu
- By Javichu
- Device Reviews
- 1 Replies
Hello fellow vapers.
A well known vaping Spanish website read some of my previous reviews here in ECF and contacted me to see if i was interested in writing a review in Spanish for the Vaporesso SWAG PX80.
After a week of my response email telling them i would be happy to review the product so they could post in their website i got the package in the mail.
They sent me Vaporesso SWAG PX80,3 coils and a 4ml SWAG Pod (one in the box is only 2ml)
I recently sent a pm to @Vaporesso_Chelsea to ask her if she would want me to translate my Spanish review and post it here,after a go ahead from her here i present my review of the Vaporesso SWAG PX80.
First of all let me start with the technical details of the Vaporesso SWAG PX80:
Contents of the box:
1 x SWAG PX80 MOD, 1 x 2ml SWAG POD, 1 x GTX 0.2ohm MESH Coil, 1 x GTX 0.3ohm MESH Coil, 1 x Type-C USB Cable, 1 x User Manual, 1 x Warranty Card, 1 x Reminder Card.
First impressions:
The device itself felt small at first,well that is on me since i have been using a ''gigantic'' Jackaroo for a long time.
The design is sleek and the modern aesthetics is something that will make you like this little device right away.
Time to vape:
Device in question makes it easy to put in the coil and to fill the tank.
Although if i were to be honest i am not fond of the bottom fill system,would have preferred a way to fill the tank from the top.
After priming the coil (started with the 0.2ohm included in the box) and let it sit for a while i got started.
First with low wattage and worked up little by little,the 0.2ohm coil is has a recommended wattage use from 45w to 60w.
This device has SMART VW,i had this disabled at first so i could work myself up from a lower wattage and break in the coils but in SMART VW mode the mod scans your coil and sets the wattage to the optimal setting.
Now here is where i have to declare that either the quality control line of the coils is not that good or i am the unluckiest person in the face of this earth because both coils that were included in the box got burnt in less than a day.
Now keep in mind that on my end everything was done right:
-i primed the coils correctly
-i let them sit so they would soak up the e-liquid
-i never chained vape while using this device
(i tend to chain vape once in a while so knowing this i had my Asmodus Colossal/Hellvape Destiny RTA also on my desk so when i felt the need to chain vape i wouldn't use the Swag PX80)
-I also always kept the mod on smart mode AND locked the watts (with 3 presses of the fire button)
-I never went above the recommended wattage for each coil,to be honest i always kept myself at the minimum.
In case of the 0.2ohm coil i had the mod at 45w and when using the 0.3ohm coil i had the mod at 30/32w.
At the moment of writing this review (well translating it since yesterday i wrote the review in Spanish) i am going thru my 3rd coil and yeah the burnt taste is starting to rear his ugly head thru the door.
Another issue i have is with the bottom the the device,it is very easy to tip over since it is slightly curved so it really doesn't have much surface in contact with were it stands.
I tipped it over so many times i had to place a mouse pad on the left side of the desk where my mods usually are.
While i do like the materials used in this mod i do feel that the side where the screen is located is a bit to ''smooth''
By this i mean that when i have it in my hand i tend to get the impression that it is wet.
It is only an impression when i feel it with my fingers although i haven't had any leaking so i just discard that thought but it still feels like it has kinda slippery to me.
Both of these are not deal breakers but they do affect my impressions of the device.
FINAL IMPRESSIONS:
My first vaping device was a Vaporesso Veco,after a couple of months i bought myself a SWAG 80w kit which i used for quite a bit of time.
I was really looking forward to using this device since i liked my previous SWAG 80w so much but it's just the small things that made me not like this mod that much.
The bottom refill system,really not a fan of the rubber tabs.
Bad luck or quality control of the GTX coils and the instability of said mod when it's on the flat surface just killed my enthusiasm for the SWAG PX 80.
Would i recommend this device?
To be honest i am not sure,if left to my own devices i think i would rather get a FORZ TX80 or even a SWAG II,the 510 connection is a plus.
Thanks everyone for reading.
A well known vaping Spanish website read some of my previous reviews here in ECF and contacted me to see if i was interested in writing a review in Spanish for the Vaporesso SWAG PX80.
After a week of my response email telling them i would be happy to review the product so they could post in their website i got the package in the mail.
They sent me Vaporesso SWAG PX80,3 coils and a 4ml SWAG Pod (one in the box is only 2ml)
I recently sent a pm to @Vaporesso_Chelsea to ask her if she would want me to translate my Spanish review and post it here,after a go ahead from her here i present my review of the Vaporesso SWAG PX80.
First of all let me start with the technical details of the Vaporesso SWAG PX80:
Contents of the box:
1 x SWAG PX80 MOD, 1 x 2ml SWAG POD, 1 x GTX 0.2ohm MESH Coil, 1 x GTX 0.3ohm MESH Coil, 1 x Type-C USB Cable, 1 x User Manual, 1 x Warranty Card, 1 x Reminder Card.
First impressions:
The device itself felt small at first,well that is on me since i have been using a ''gigantic'' Jackaroo for a long time.
The design is sleek and the modern aesthetics is something that will make you like this little device right away.
Time to vape:
Device in question makes it easy to put in the coil and to fill the tank.
Although if i were to be honest i am not fond of the bottom fill system,would have preferred a way to fill the tank from the top.
After priming the coil (started with the 0.2ohm included in the box) and let it sit for a while i got started.
First with low wattage and worked up little by little,the 0.2ohm coil is has a recommended wattage use from 45w to 60w.
This device has SMART VW,i had this disabled at first so i could work myself up from a lower wattage and break in the coils but in SMART VW mode the mod scans your coil and sets the wattage to the optimal setting.
Now here is where i have to declare that either the quality control line of the coils is not that good or i am the unluckiest person in the face of this earth because both coils that were included in the box got burnt in less than a day.
Now keep in mind that on my end everything was done right:
-i primed the coils correctly
-i let them sit so they would soak up the e-liquid
-i never chained vape while using this device
(i tend to chain vape once in a while so knowing this i had my Asmodus Colossal/Hellvape Destiny RTA also on my desk so when i felt the need to chain vape i wouldn't use the Swag PX80)
-I also always kept the mod on smart mode AND locked the watts (with 3 presses of the fire button)
-I never went above the recommended wattage for each coil,to be honest i always kept myself at the minimum.
In case of the 0.2ohm coil i had the mod at 45w and when using the 0.3ohm coil i had the mod at 30/32w.
At the moment of writing this review (well translating it since yesterday i wrote the review in Spanish) i am going thru my 3rd coil and yeah the burnt taste is starting to rear his ugly head thru the door.
Another issue i have is with the bottom the the device,it is very easy to tip over since it is slightly curved so it really doesn't have much surface in contact with were it stands.
I tipped it over so many times i had to place a mouse pad on the left side of the desk where my mods usually are.
While i do like the materials used in this mod i do feel that the side where the screen is located is a bit to ''smooth''
By this i mean that when i have it in my hand i tend to get the impression that it is wet.
It is only an impression when i feel it with my fingers although i haven't had any leaking so i just discard that thought but it still feels like it has kinda slippery to me.
Both of these are not deal breakers but they do affect my impressions of the device.
FINAL IMPRESSIONS:
My first vaping device was a Vaporesso Veco,after a couple of months i bought myself a SWAG 80w kit which i used for quite a bit of time.
I was really looking forward to using this device since i liked my previous SWAG 80w so much but it's just the small things that made me not like this mod that much.
The bottom refill system,really not a fan of the rubber tabs.
Bad luck or quality control of the GTX coils and the instability of said mod when it's on the flat surface just killed my enthusiasm for the SWAG PX 80.
Would i recommend this device?
To be honest i am not sure,if left to my own devices i think i would rather get a FORZ TX80 or even a SWAG II,the 510 connection is a plus.
Thanks everyone for reading.
-
Locked
BMOR Venus Disposable Vape 2500 Puffs $7.99 In Stock
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Have you used the disposable vapes by BMOR? Today let's check out the BMOR Venus whose design is inspired by the planet Venus. Here we go!
BMOR Venus again raises the standard of BMOR vape puffs. The Venus orbit pattern printed on it symbolizes the importance of freedom. The body has no buttons, easy to operate, convenient for you to vaping quickly. Each BMOR Venus is powered by an internal 1200mAh battery and prefilled with 6ml e-liquid, resulting in up to 2500 puffs, which means an average session will last up to 10-20 days. For worry-free use, the device also comes with multiple safety functions, including short circuit protection, over-vaping protection, and low-voltage protection.
At the bottom of the device, there is a small LED that can respond to the power supply voltage. It lights up when you take a puff which means that the device is working normally. In turn, the top of the device is equipped with an ergonomic food-grade flat mouthpiece. Moreover, the Venus vape disposable also has a unique patented airway inside, providing good sensitivity and good consistency. 10 prefilled flavors for you to choose from. Anyway, BMOR Venus is definitely worth a shot and you can choose from 10 quality flavors carefully designed to be delicious until the last puff.
Get it here: BMOR Venus Disposable Vape Kit 2500 Puffs 1200mAh
You may also like:
cheap pod twist 2500
tugboat xxl buy
BMOR Venus again raises the standard of BMOR vape puffs. The Venus orbit pattern printed on it symbolizes the importance of freedom. The body has no buttons, easy to operate, convenient for you to vaping quickly. Each BMOR Venus is powered by an internal 1200mAh battery and prefilled with 6ml e-liquid, resulting in up to 2500 puffs, which means an average session will last up to 10-20 days. For worry-free use, the device also comes with multiple safety functions, including short circuit protection, over-vaping protection, and low-voltage protection.
At the bottom of the device, there is a small LED that can respond to the power supply voltage. It lights up when you take a puff which means that the device is working normally. In turn, the top of the device is equipped with an ergonomic food-grade flat mouthpiece. Moreover, the Venus vape disposable also has a unique patented airway inside, providing good sensitivity and good consistency. 10 prefilled flavors for you to choose from. Anyway, BMOR Venus is definitely worth a shot and you can choose from 10 quality flavors carefully designed to be delicious until the last puff.
Get it here: BMOR Venus Disposable Vape Kit 2500 Puffs 1200mAh
You may also like:
cheap pod twist 2500
tugboat xxl buy
-
Locked
Where to buy Wotofo SMRT PnP Replacement Cartridge 4.5ml (1pc/pack)?
- VapesourcingUK
- 0 Replies
At Wotofo uk, we believe that a good e-cigarette product is also interactive and playable. You can easily customize the entire system to suit your vape preferences.
The Wotofo SMRT PnP Pod Cartridge uk is the ultimate solution when it comes to ensuring that you can continue enjoying an uninterrupted vaping experience with your Wotofo SMRT Pod System. The simple replacement pod cartridge comes with a 4.5 ml capacity and a convenient side filling system. Made using high-quality PCTG material, the Wotofo SMRT Pod Cartridge has been designed specifically for use with the Wotofo SMRT Pod System Starter Kit.
It comes with an adjustable air intake at the bottom that gives you an amazing experience. Compatible with a wide series of coils, this replacement cartridge can be incredibly useful for you if you are traveling and you run out of juice. Instead of possibly creating a mess trying to refill the cartridge on the move, you can swap it out with the replacement cartridge and refill it whenever it is convenient. With an easy replacement mechanism, you can switch from the old cartridge to the new one in a matter of seconds.Let's check it on vape shops uk online cheap .
SPECIFICATION
Main Material: PCTG
Pod Cartridge Type: Refillable Pod for Replaceable Coils
Pod Capacity:4.5ml (Standard Edition)
Filling Method:Side Filling
Airflow: Side Airflow
Fit For: Wotofo SMRT Kit
Resistance:0.2Ω
Quick Link: Wotofo SMRT PnP Replacement Pod Cartridge 4.5ml (1pc/pack)
The Wotofo SMRT PnP Pod Cartridge uk is the ultimate solution when it comes to ensuring that you can continue enjoying an uninterrupted vaping experience with your Wotofo SMRT Pod System. The simple replacement pod cartridge comes with a 4.5 ml capacity and a convenient side filling system. Made using high-quality PCTG material, the Wotofo SMRT Pod Cartridge has been designed specifically for use with the Wotofo SMRT Pod System Starter Kit.
It comes with an adjustable air intake at the bottom that gives you an amazing experience. Compatible with a wide series of coils, this replacement cartridge can be incredibly useful for you if you are traveling and you run out of juice. Instead of possibly creating a mess trying to refill the cartridge on the move, you can swap it out with the replacement cartridge and refill it whenever it is convenient. With an easy replacement mechanism, you can switch from the old cartridge to the new one in a matter of seconds.Let's check it on vape shops uk online cheap .
SPECIFICATION
Main Material: PCTG
Pod Cartridge Type: Refillable Pod for Replaceable Coils
Pod Capacity:4.5ml (Standard Edition)
Filling Method:Side Filling
Airflow: Side Airflow
Fit For: Wotofo SMRT Kit
Resistance:0.2Ω
Quick Link: Wotofo SMRT PnP Replacement Pod Cartridge 4.5ml (1pc/pack)
-
Locked
IJOY Captain Link kit -100W, with a folding key
- By Verashu
- Vapesourcing
- 0 Replies
Hello, friends, closes the topic of new products, the set of the IJOY brand, which has not yet been officially released. There is something to see, therefore, we will not linger in the hat - Captain Link kit.
Parameters
Dimensions: 97 x 40 x 30mm
Body material: zinc alloy + plastic + silicone
Power supply: 1 x 18650/1 x 2X700
Chipset: Univ S 2.0
Output power: 5 - 100W
Voltage range: 0.0 - 8.0
The strength of the peak current: 45A
mode: VW, TC (NI200, SS, TI), TCR,
temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: 0.05 - 3.0Ω
The complete vape tank is the same as the new tank, but its structure is already familiar to us. We observed the situation of multiple brands at the same time-a plastic bottle, also called an ink cartridge, which is mounted on a metal base through a standard 510 connector.
The appearance couldn't be simpler, we won't repeat it. Drip irrigation integration, traditionally the bottom of the filling. However, the spaciousness is very good, naturally in the environment of the pod, rather than in the non-service sector.
The replaceable evaporator is represented by a duet performed on the grid. In addition, the interesting thing about them is that the store that collects novelty pre-order items calls them UB Lite. Nevertheless, I believe this is a common coincidence-just a few days ago, Lost Vape introduced the evaporator series of the same name and its new furnace.
You can click here to learn more details: IJOY Captain Link Pod Mod Kit 100W
Other kits you may prefer:
kangvape slick plus price
kangvape smod stick plus price
Parameters
Dimensions: 97 x 40 x 30mm
Body material: zinc alloy + plastic + silicone
Power supply: 1 x 18650/1 x 2X700
Chipset: Univ S 2.0
Output power: 5 - 100W
Voltage range: 0.0 - 8.0
The strength of the peak current: 45A
mode: VW, TC (NI200, SS, TI), TCR,
temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: 0.05 - 3.0Ω
The complete vape tank is the same as the new tank, but its structure is already familiar to us. We observed the situation of multiple brands at the same time-a plastic bottle, also called an ink cartridge, which is mounted on a metal base through a standard 510 connector.
The appearance couldn't be simpler, we won't repeat it. Drip irrigation integration, traditionally the bottom of the filling. However, the spaciousness is very good, naturally in the environment of the pod, rather than in the non-service sector.
The replaceable evaporator is represented by a duet performed on the grid. In addition, the interesting thing about them is that the store that collects novelty pre-order items calls them UB Lite. Nevertheless, I believe this is a common coincidence-just a few days ago, Lost Vape introduced the evaporator series of the same name and its new furnace.
You can click here to learn more details: IJOY Captain Link Pod Mod Kit 100W
Other kits you may prefer:
kangvape slick plus price
kangvape smod stick plus price
-
Locked
Hi new here! Been smoke free since January 4th, using aspire pockets and aspire k3! ☺️
- By SmokeyPen
- New Members: Introduce Yourself!
- 11 Replies
Hi I’m new here been smoke free since January 4th, using aspire pockets and aspire k3! 
-
Locked
Vaporesso Luxe Q Pod System Kit
Hello, everyone
The latest Pod system kit from Vaporesso, Vaporesso Luxe Q 1000mAh Pod System Starter Kit with 2.0ml Pod Cartridge, SSS Leak Resistance Technology
Vaporesso Luxe Q Pod Kit, a slim and compact pod kit, features SSS Leak Resistance Technology, building comprehensive anti-leakage liquid effect.
Vaporesso Luxe Q 1000mAh Pod Kit is powered by a 1000mAh built-in battery with Type-C charging, providing a long lasting vaping experience. Luxe Q Pod System Kit supports draw activated system, easy for operation. By simply switching the installing direction of the cartridge, Luxe Q Kit can change the airflow, delivers an excellent vaping experience.
Vaporesso Luxe Q Pod Cartridge holds 2.0ml visible capacity with top filling system. Two pod cartridges included in the package, one pod with 0.8ohm resistance and another with 1.2ohm, absolutely brings an experience of pure flavor with every breath.
Seven colors in total: Black / White / Blue / Red / Pink / Green / Brown
More details about Vaporesso Luxe Q Pod System Starter Kit, Please Check >> https://www.3fvape.com/48384-vaporesso-luxe-q-pod-system-vape-kit.html
The latest Pod system kit from Vaporesso, Vaporesso Luxe Q 1000mAh Pod System Starter Kit with 2.0ml Pod Cartridge, SSS Leak Resistance Technology
Vaporesso Luxe Q Pod Kit, a slim and compact pod kit, features SSS Leak Resistance Technology, building comprehensive anti-leakage liquid effect.
Vaporesso Luxe Q 1000mAh Pod Kit is powered by a 1000mAh built-in battery with Type-C charging, providing a long lasting vaping experience. Luxe Q Pod System Kit supports draw activated system, easy for operation. By simply switching the installing direction of the cartridge, Luxe Q Kit can change the airflow, delivers an excellent vaping experience.
Vaporesso Luxe Q Pod Cartridge holds 2.0ml visible capacity with top filling system. Two pod cartridges included in the package, one pod with 0.8ohm resistance and another with 1.2ohm, absolutely brings an experience of pure flavor with every breath.
Seven colors in total: Black / White / Blue / Red / Pink / Green / Brown
More details about Vaporesso Luxe Q Pod System Starter Kit, Please Check >> https://www.3fvape.com/48384-vaporesso-luxe-q-pod-system-vape-kit.html
-
Locked
Aspire Onixx Mod
- By Ema
- Sourcemore
- 0 Replies
Aspire Onixx Mod
Onixx Mod is easy to use and is designed for vape starters specially. It can work with any 510 tanks in the market with standard connector. It comes with 2000mAh big battery capacity in a small size. Onixx Mod features BP80 appearance design with upholstered soft leather and metallic zinc alloy, so it is a combination of softness and hardness. Designed with type-c fast charging, it will provide you stable power and optimized performance anytime and anywhere. There are three buttons for easy operation. It can output in VW mode ranging 1-40W. The vaping information will be showed to you with the 0.87 inch OLED screen. Adopting ASP chipset, Onixx Mod has overall protections for safe use.
Details:
1. Compatible with any 510 tanks in the market
2. Outputs in VW mode ranging 1 to 40W
3. Combination of softness and hardness
4. Small size but has 2000mAh battery capacity
5. Type-C fast charging
6. 3 buttons for easy operation
7. 0.87 inch OLED screen
8. Aspire ASP chipset for safety protections: Over-time/Short Circuit/Overheat/Low Voltage/Overcharge/Overdischarge Protection
Onixx Mod is easy to use and is designed for vape starters specially. It can work with any 510 tanks in the market with standard connector. It comes with 2000mAh big battery capacity in a small size. Onixx Mod features BP80 appearance design with upholstered soft leather and metallic zinc alloy, so it is a combination of softness and hardness. Designed with type-c fast charging, it will provide you stable power and optimized performance anytime and anywhere. There are three buttons for easy operation. It can output in VW mode ranging 1-40W. The vaping information will be showed to you with the 0.87 inch OLED screen. Adopting ASP chipset, Onixx Mod has overall protections for safe use.
Details:
1. Compatible with any 510 tanks in the market
2. Outputs in VW mode ranging 1 to 40W
3. Combination of softness and hardness
4. Small size but has 2000mAh battery capacity
5. Type-C fast charging
6. 3 buttons for easy operation
7. 0.87 inch OLED screen
8. Aspire ASP chipset for safety protections: Over-time/Short Circuit/Overheat/Low Voltage/Overcharge/Overdischarge Protection
-
Locked
Closed/Sold OMNI Disposable Vape Pens
- Member Classifieds and Swaps
- 2 Replies
OMNI Disposable Vape Pens - $20
- Passionfruit (50mg)
- BNIB (Factory Sealed Box)
- 10 Pack
All Shipments will be sent out within 24 hours after receiving payment, and a tracking number will be provided.
Please do not put any notes in the PayPal transaction or your payment will be refunded immediately.
- Shipping: CONUS
- Shipping Cost: ($4 First Class or $8 Priority)
- PayPal F+F (No Charge)
- PayPal G+S (Add 4%)
- CashApp: (Add 1.5%)
- Passionfruit (50mg)
- BNIB (Factory Sealed Box)
- 10 Pack
All Shipments will be sent out within 24 hours after receiving payment, and a tracking number will be provided.
Please do not put any notes in the PayPal transaction or your payment will be refunded immediately.
- Shipping: CONUS
- Shipping Cost: ($4 First Class or $8 Priority)
- PayPal F+F (No Charge)
- PayPal G+S (Add 4%)
- CashApp: (Add 1.5%)
